NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
This document provides information on low ohm power resistors in the HEE series from HTR. It includes specifications for 8 resistor models including their power ratings at 100C and 70C, dimensions, resistance values, tolerances, and other electrical and mechanical characteristics. The document also provides recommended applications, features, packaging, ordering information and derating curves.
This document summarizes the specifications and characteristics of HHE series low ohm power resistors:
- Open frame electron beam welded resistors available in power ratings from 4W to 10W and resistance values from R0003 to R002.
- Suitable for applications requiring high current carrying capability like power tools, automotive power modules, and frequency converters.
- Features include constant power output at high temperatures, sturdy copper connectors, and excellent long-term stability.
This document provides information on a series of low ohm power resistors called the HSE series. It includes details on their physical configuration, power ratings at different temperatures, applications, features, dimensional specifications, and performance test methods. They are open frame electron beam welded resistors available in resistance values from R0002 to R005 with power ratings from 2W to 12W.
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
This document provides specifications for HTR's HEAL series of current sense resistors. The resistors have a ceramic housing enclosing an alloy electrical resistance ribbon and tinned copper terminals. They are available in power ratings from 2.5W to 12W and resistance values from 0.0025 ohms to 20 ohms. The document lists the resistors' physical, electrical, and environmental characteristics and performance requirements.
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
This document summarizes the specifications of HBE series low ohm power resistors. Key points include:
- They are open frame electron beam welded resistors available in power ratings from 2W to 7W at various temperatures.
- Applications include current sensors, automotive uses requiring high current, and power modules.
- Features include constant power up to 5W for some models, 4-terminal connections for accurate measurement, and excellent long-term stability.
- Electrical and environmental characteristics and performance requirements are provided such as resistance tolerance, temperature range, voltage rating, and results of various tests.
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
This document provides information on low ohm power resistors in the HEE series from HTR. It includes specifications for 8 resistor models including their power ratings at 100C and 70C, dimensions, resistance values, tolerances, and other electrical and mechanical characteristics. The document also provides recommended applications, features, packaging, ordering information and derating curves.
This document summarizes the specifications and characteristics of HHE series low ohm power resistors:
- Open frame electron beam welded resistors available in power ratings from 4W to 10W and resistance values from R0003 to R002.
- Suitable for applications requiring high current carrying capability like power tools, automotive power modules, and frequency converters.
- Features include constant power output at high temperatures, sturdy copper connectors, and excellent long-term stability.
This document provides information on a series of low ohm power resistors called the HSE series. It includes details on their physical configuration, power ratings at different temperatures, applications, features, dimensional specifications, and performance test methods. They are open frame electron beam welded resistors available in resistance values from R0002 to R005 with power ratings from 2W to 12W.
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
This document provides specifications for HTR's HEAL series of current sense resistors. The resistors have a ceramic housing enclosing an alloy electrical resistance ribbon and tinned copper terminals. They are available in power ratings from 2.5W to 12W and resistance values from 0.0025 ohms to 20 ohms. The document lists the resistors' physical, electrical, and environmental characteristics and performance requirements.
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
This document summarizes the specifications of HBE series low ohm power resistors. Key points include:
- They are open frame electron beam welded resistors available in power ratings from 2W to 7W at various temperatures.
- Applications include current sensors, automotive uses requiring high current, and power modules.
- Features include constant power up to 5W for some models, 4-terminal connections for accurate measurement, and excellent long-term stability.
- Electrical and environmental characteristics and performance requirements are provided such as resistance tolerance, temperature range, voltage rating, and results of various tests.
RL - CURRENT SENSE / LOW OHM CERAMIC ENCASED TYPEhtrindia
The document provides specifications for HTR's RL series of ceramic encased power resistors. The resistors come in power ratings from 0.5W to 10W, resistance values from 0.0015 ohms to 80 ohms, and dimensions ranging from 8mm to 60mm. They offer benefits like negligible inductance, high thermal efficiency, and resistance to temperatures up to 275°C. The document also provides detailed information on electrical characteristics, performance testing requirements, applications, and ordering options.
This document describes wire wound resistors that have several key features:
- A ceramic core with a silicone coating for flame retardancy and high thermal conductivity.
- Resistance values from 0.5W to 20W that can have tolerances as close as 0.25% and TCR as low as 20ppm/°C.
- They are suitable for industrial and professional applications requiring precision power resistors that can operate at high ambient temperatures.
OP - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples are given for current sensing in power supplies. Ordering information includes series, type, packaging and resistance/tolerance requirements.
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
This document describes a series of current sense resistors called OFSC resistors. They are available in 5W and 10W power ratings with resistance values ranging from 0.001 ohm to 0.003 ohm for 5W resistors and 0.0004 ohm to 0.003 ohm for 10W resistors. The resistors have four termination points to minimize inductance and are coated in flame retardant silicone for protection. They are qualified for use in applications according to the AEC-Q200 standard and can withstand temperatures from -55°C to 275°C.
This document provides information on low ohm power resistors made by HTE including:
- Power ratings from 1W to 3W at temperatures from 70C to 100C
- Resistance values from 0.3 to 10 mohms
- Applications in sensors, automotive, and power modules
- Features such as mounting on substrates and excellent long-term stability
- Dimensional specifications and testing requirements for the resistors
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
This document provides information on alloy resistance wire wound resistors that are suitable for reflow soldering. It includes specifications for silicone coated surface mount resistors in the HIAS series, such as power ratings, resistance ranges, dimensions, electrical characteristics, and ordering information. Mounting recommendations and test methods for parameters like resistance to soldering heat and solderability are also specified.
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
This document provides specifications for current sense resistors in HTR's OA and OP series. The OA series consists of axial leaded resistors from 1W to 3W, while the OP series are surface mount resistors from 0.5W to 5W. Both series offer resistance values from a few milliohms to 100 ohms with temperature coefficients as low as ±60ppm/°C. The document provides detailed electrical, mechanical, and environmental ratings and test results. Typical applications include current sensing in power supplies, instruments, and regulators.
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...Creativity Please
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
This document describes silicone coated wire wound resistors. Key details include:
- Resistors come in various models (F-2P to F-8P) with power ratings from 2.5W to 8W and resistance ranges from 10-56k ohms.
- They have a silicone flame retardant coating and various terminal options for compatibility with wave soldering.
- Specifications cover electrical characteristics, temperature rise, and mechanical specifications for resistance, voltage rating, and environmental testing.
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
HCALS - SURFACE MOUNT RESISTORS CERAMIC ENCASED TYPEhtrindia
This document provides information on ceramic encased surface mount resistors made by HTR India. It describes the product specifications including power ratings from 2W to 3W, resistance ranges from R001 to R10, dimensions, electrical and environmental characteristics, and ordering information. The resistors have an inorganic fire retardant and ceramic housing, are suitable for re-flow soldering, and packing is available in tape and reel.
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
The document describes shunt resistors for energy meters. Key points:
- The resistors have 4-terminal Kelvin connections, extremely low resistance values below 0.5nH, and negligible thermal EMF of 3μV/°C.
- They are designed for precision energy meter and current sensing applications with ratings up to 5W and 1kW pulses.
- The resistors have manganin or copper-manganese-nickel components and can be supplied soldered together for lower resistance values or enhanced heat dissipation.
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
This document summarizes the specifications of HTR's ceramic encased wire wound resistors. The resistors feature a ceramic housing, inorganic fire retardant encapsulant, and plated stainless steel mounting brackets. They are rated for temperatures up to 350°C and powers ranging from 10W to 40W. The resistors offer resistance values from 10 ohms to 68k ohms and meet various industry standards and certifications for electrical, mechanical, and environmental performance. They are suitable for industrial applications requiring high temperature operation and vibration resistance.
OA - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples given are power supplies, instruments, and current sensing circuits. Ordering information includes series, type, packaging and resistance value/tolerance.
The document summarizes the specifications of HTR's compact wire wound resistors. It describes the physical construction including a ceramic core with alloy resistance wire wound to specific parameters and fully welded. It is rated from 1W to 5W and tolerances as close as 1%. Dimensions and resistance ranges are provided for each type. It discusses electrical characteristics including temperature rise curves. Environmental specifications include high temperature operation and resistance to shock, vibration, soldering heat and more. Pulse capability curves are shown. Ordering information includes options for RoHS, non-inductive winding, impulse type and taping.
RL - CURRENT SENSE / LOW OHM CERAMIC ENCASED TYPEhtrindia
The document provides specifications for HTR's RL series of ceramic encased power resistors. The resistors come in power ratings from 0.5W to 10W, resistance values from 0.0015 ohms to 80 ohms, and dimensions ranging from 8mm to 60mm. They offer benefits like negligible inductance, high thermal efficiency, and resistance to temperatures up to 275°C. The document also provides detailed information on electrical characteristics, performance testing requirements, applications, and ordering options.
This document describes wire wound resistors that have several key features:
- A ceramic core with a silicone coating for flame retardancy and high thermal conductivity.
- Resistance values from 0.5W to 20W that can have tolerances as close as 0.25% and TCR as low as 20ppm/°C.
- They are suitable for industrial and professional applications requiring precision power resistors that can operate at high ambient temperatures.
OP - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples are given for current sensing in power supplies. Ordering information includes series, type, packaging and resistance/tolerance requirements.
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
This document describes a series of current sense resistors called OFSC resistors. They are available in 5W and 10W power ratings with resistance values ranging from 0.001 ohm to 0.003 ohm for 5W resistors and 0.0004 ohm to 0.003 ohm for 10W resistors. The resistors have four termination points to minimize inductance and are coated in flame retardant silicone for protection. They are qualified for use in applications according to the AEC-Q200 standard and can withstand temperatures from -55°C to 275°C.
This document provides information on low ohm power resistors made by HTE including:
- Power ratings from 1W to 3W at temperatures from 70C to 100C
- Resistance values from 0.3 to 10 mohms
- Applications in sensors, automotive, and power modules
- Features such as mounting on substrates and excellent long-term stability
- Dimensional specifications and testing requirements for the resistors
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
This document provides information on alloy resistance wire wound resistors that are suitable for reflow soldering. It includes specifications for silicone coated surface mount resistors in the HIAS series, such as power ratings, resistance ranges, dimensions, electrical characteristics, and ordering information. Mounting recommendations and test methods for parameters like resistance to soldering heat and solderability are also specified.
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
This document provides specifications for current sense resistors in HTR's OA and OP series. The OA series consists of axial leaded resistors from 1W to 3W, while the OP series are surface mount resistors from 0.5W to 5W. Both series offer resistance values from a few milliohms to 100 ohms with temperature coefficients as low as ±60ppm/°C. The document provides detailed electrical, mechanical, and environmental ratings and test results. Typical applications include current sensing in power supplies, instruments, and regulators.
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...Creativity Please
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
This document describes silicone coated wire wound resistors. Key details include:
- Resistors come in various models (F-2P to F-8P) with power ratings from 2.5W to 8W and resistance ranges from 10-56k ohms.
- They have a silicone flame retardant coating and various terminal options for compatibility with wave soldering.
- Specifications cover electrical characteristics, temperature rise, and mechanical specifications for resistance, voltage rating, and environmental testing.
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
HCALS - SURFACE MOUNT RESISTORS CERAMIC ENCASED TYPEhtrindia
This document provides information on ceramic encased surface mount resistors made by HTR India. It describes the product specifications including power ratings from 2W to 3W, resistance ranges from R001 to R10, dimensions, electrical and environmental characteristics, and ordering information. The resistors have an inorganic fire retardant and ceramic housing, are suitable for re-flow soldering, and packing is available in tape and reel.
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
The document describes shunt resistors for energy meters. Key points:
- The resistors have 4-terminal Kelvin connections, extremely low resistance values below 0.5nH, and negligible thermal EMF of 3μV/°C.
- They are designed for precision energy meter and current sensing applications with ratings up to 5W and 1kW pulses.
- The resistors have manganin or copper-manganese-nickel components and can be supplied soldered together for lower resistance values or enhanced heat dissipation.
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
This document summarizes the specifications of HTR's ceramic encased wire wound resistors. The resistors feature a ceramic housing, inorganic fire retardant encapsulant, and plated stainless steel mounting brackets. They are rated for temperatures up to 350°C and powers ranging from 10W to 40W. The resistors offer resistance values from 10 ohms to 68k ohms and meet various industry standards and certifications for electrical, mechanical, and environmental performance. They are suitable for industrial applications requiring high temperature operation and vibration resistance.
OA - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples given are power supplies, instruments, and current sensing circuits. Ordering information includes series, type, packaging and resistance value/tolerance.
The document summarizes the specifications of HTR's compact wire wound resistors. It describes the physical construction including a ceramic core with alloy resistance wire wound to specific parameters and fully welded. It is rated from 1W to 5W and tolerances as close as 1%. Dimensions and resistance ranges are provided for each type. It discusses electrical characteristics including temperature rise curves. Environmental specifications include high temperature operation and resistance to shock, vibration, soldering heat and more. Pulse capability curves are shown. Ordering information includes options for RoHS, non-inductive winding, impulse type and taping.
This document provides information on HSVA/HSVAU series ceramic encased wire wound resistors. It describes the physical configuration, dimensions, resistance range, electrical and environmental characteristics, typical applications, and ordering information for these resistors with power ratings from 4W to 17W and resistance values from R04 to 82K. The resistors have a ceramic housing, alloy wire wound element, and mechanically crimped termination assembly.
HRW - WIREWOUND, LOW OHM CURRENT SENSE SURFACE MOUNT POWER RESISTORShtrindia
• Wire wound and alloy ribbon
element options.
• Moulded resistor construction.
• Tape and reel packing for pick & place machine.
• Fusible type available.
• Non inductive type available.
HTA - WIRE WOUND RESISTORS SILICONE COATED TYPE (OLD)htrindia
This document provides information on HTA series silicone coated wire wound resistors. Key details include:
- Resistors have a flame retardant silicone coating, ceramic core, and resistance wire wound to specific parameters.
- Power ratings range from 0.75W to 12W, tolerances as close as 1%, and TCR as low as ±20ppm/°C.
- Resistors meet various industry standards and are available in different configurations including bulk, taped, preformed leads, and pulse-rated types.
- Intended for industrial, electrical, and electronic applications where large power dissipation and elevated operating temperatures are required.
The gantry assembly contains the x-ray tube and detectors that generate and detect x-rays, as well as the patient support and positioning equipment. There are two main types of detectors: scintillation detectors that use materials like sodium iodide and gas filled detectors that use gases like xenon and krypton. The data acquisition system converts the detected x-ray signals into digital images that are processed and reconstructed into scans by computer software. The operating console is used by the technician and physician to control the scan settings and movement of the patient.
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)Creativity Please
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Similar to HANS - AUTOMOTIVE RESISTIVE DEVICES (20)
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Trusted Execution Environment for Decentralized Process MiningLucaBarbaro3
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
HANS - AUTOMOTIVE RESISTIVE DEVICES
1. 1K0
1K125
2K0
5K0
7K5
10K
(All in tolerances of 20%, 10% & 5%)
AUTOMOTIVE
RESISTIVE DEVICES
HANS
SERIES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant.
e : info@htr-india.com
www.htr-india.comRev Date : 14/06/2017
Asper AEC-Q200
2. MECHANICAL SPECIFICATION
HTR Type Resistance Value D (max) D1 (+/-0.1) Typical Inductance
L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm)
NS 1K0 1K0 11.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
NS 1K125 1K125 11.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
NS 2K0 2K0 11.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
NS 5K0 5K0 11.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
NS 7K5 7K5 15.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
NS 10K 10K 18.0 23.7 4.65 4.35 MIN 15 μH
(at freq. 1 Mhz)
ELECTRICAL SPECIFICATION
Nominal Value : NS 1K0 - 1K0
NS 1K125 - 1K125
NS 2K0 - 2K0
NS 5K0 - 5K0
NS 7K5 - 7K5
NS 10K - 10K
Tolerance : ± 20% / ± 10% / ± 5%
L
AUTOMOTIVE
RESISTIVE
DEVICES
HANS
2. PERFORMANCE REQUIREMENTS
PARAMETER REQUIREMENTS
Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2%
Operating Temperature Range -40°C to 220°C
Temperature Co-efficient (Typical) ± 150 ppm / °C
High Voltage Pulses At High Frequency :
(15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1
sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical)
TYPICAL APPLICATIONS :
The HANS series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI),
which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in
force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug
leads can ensure compliance.
Marking : NO MARKING
PACKING : 2000 pcs / small box of approx size 200 mm x 150 mm x 70 mm.
ORDERING INFORMATION
Series HTR Type Length Tolerance
HANS NS 5K0 18.0 20%
e : info@htr-india.com
www.htr-india.com
Rev Date : 14/06/2017
Length Range
“*”Please specify length required