Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
•
0 likes•538 views
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Report
Share
Report
Share
Download to read offline
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-silicone-coated-resistors-wire-wound-resistors-frs-english...
This document describes fusible resistors that are designed to fuse or blow if subjected to abnormal voltage/current spikes or circuit malfunctions. It provides details on fusible resistor types, dimensions, resistance ranges, performance specifications, and applications. Fusible resistors are tailor-made to function as normal resistors under normal conditions but fuse as a safety measure under overload or fault conditions.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
The document describes HTR's HIP series of silicone coated, wire wound resistors. The resistors are available in power ratings from 3W to 10W and resistance values from R01 to 90K ohms. They have PCB-type terminations for easy wave soldering. Key features include flame retardant silicone coating, resistance to soldering heat, high overload voltage tolerance, and stable resistance over temperature. Applications include use in TVs, monitors, and audio equipment. Ordering information is provided for standard and RoHS compliant models.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hfom.pdf
This document provides information on HTR's wire wound resistors of the HFOM series. It specifies the power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms. The resistors are available in two mounting configurations and dimensions are provided. Electrical specifications include temperature range of -40 to 250 degrees C, tolerance of ±10% or ±5%, and insulation resistance greater than 1000M ohms.
HSVA/HSVAU
This document provides information on HSVA/HSVAU series wire wound resistors. It includes specifications for 14 models ranging from 4W to 17W, with dimensions, resistance ranges, and typical weights listed. Key characteristics described are power rating at 70°C, resistance tolerances from ±10% to ±1%, a temperature range of -55°C to +350°C, and voltage and overload ratings. Environmental testing results for temperature cycling, damp heat, and endurance are also summarized.
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-silicone-coated-resistors-wire-wound-resistors-frs-english...
This document describes fusible resistors that are designed to fuse or blow if subjected to abnormal voltage/current spikes or circuit malfunctions. It provides details on fusible resistor types, dimensions, resistance ranges, performance specifications, and applications. Fusible resistors are tailor-made to function as normal resistors under normal conditions but fuse as a safety measure under overload or fault conditions.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
The document describes HTR's HIP series of silicone coated, wire wound resistors. The resistors are available in power ratings from 3W to 10W and resistance values from R01 to 90K ohms. They have PCB-type terminations for easy wave soldering. Key features include flame retardant silicone coating, resistance to soldering heat, high overload voltage tolerance, and stable resistance over temperature. Applications include use in TVs, monitors, and audio equipment. Ordering information is provided for standard and RoHS compliant models.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hfom.pdf
This document provides information on HTR's wire wound resistors of the HFOM series. It specifies the power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms. The resistors are available in two mounting configurations and dimensions are provided. Electrical specifications include temperature range of -40 to 250 degrees C, tolerance of ±10% or ±5%, and insulation resistance greater than 1000M ohms.
HSVA/HSVAU
This document provides information on HSVA/HSVAU series wire wound resistors. It includes specifications for 14 models ranging from 4W to 17W, with dimensions, resistance ranges, and typical weights listed. Key characteristics described are power rating at 70°C, resistance tolerances from ±10% to ±1%, a temperature range of -55°C to +350°C, and voltage and overload ratings. Environmental testing results for temperature cycling, damp heat, and endurance are also summarized.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Hfom
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms
- Two mounting configurations (Types A and B) and dimensions
- Derating curve showing linearly derated power dissipation down to 0% at 350°C
- Electrical specifications including tolerance, voltage rating, insulation resistance, temperature range and coefficient
- Marking, packaging and ordering information examples
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english
This document provides information on HTR's wire wound resistors, including their silicone/cement coated HFO series precision power resistors. It lists specifications such as power ratings from 30W to 125W, resistance ranges from 10 to 33K ohms, dimensions, derating curve, packaging information, and electrical specifications. Key details include linear derating of full power dissipation down to zero from 70°C to 350°C ambient temperature, resistance tolerances of ±10% or ±5%, and passing AEC-Q200 qualification.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english...
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 125W and resistance ranges from 10 to 33K ohms
- Dimensions and derating curve for resistors
- Marking, packaging, and specification details for the resistors
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W ratings.
- Electrical characteristics including tolerance, temperature coefficient, and environmental test results.
- Mounting and derating guidelines including temperature rise curves for different resistance values.
- Packaging and storage requirements for bulk and reel packaging configurations.
HEB - LOW OHM BATTERY SHUNT RESISTORS
This document summarizes the specifications of low ohm battery shunt resistors. The resistors come in open frame designs and power ratings from 6W to 36W with resistance values from R00005 to R001. They are used for current sensing applications in vehicles and equipment. The document provides details on dimensions, electrical characteristics, packaging, ordering information, and power derating curves.
Htr india-products-current-sense-resistors-hew-english.pdf
The document summarizes specifications for low ohm current sense resistors. It describes the resistors as having an open frame PCB mounting design with edge welding for a reduced footprint and negligible inductance. Resistance ranges from 0.0025 to 10 ohms with power ratings from 1W to 5W. The resistors have a very low temperature coefficient of resistance and meet various reliability tests for electrical and environmental characteristics.
Htr india-products-current-sense-resistors-electron-beam-welded-hbe-english
This document describes low ohm power resistors in the HBE series from HTR. The resistors are open frame electron beam welded components available in resistance values from R0002 to R005. They have power ratings from 2W to 7W at temperatures from 70C to 100C and are qualified for automotive and power applications requiring high current capability. The document provides details on specifications, performance characteristics, packaging, and ordering information.
Htr india-products-surface-mount-hcas-english.pdf
This document summarizes the specifications for HTR's HCAS series surface mount ceramic encased wirewound resistors. It includes details on power ratings, resistance ranges, dimensions, electrical characteristics like resistance tolerance and operating temperature range, and environmental test results. The resistors are available in different versions including fusible safety and non-inductive winding, and can be ordered in bulk or tape and reel packing.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english.pdf
This document provides information on ceramic encased fusible resistors from the FRC series. The resistors are designed to fuse or blow as a safety measure if subjected to an abnormal spike in voltage or current. They are available in power ratings from 1W to 3W and resistance values from 10R to 750R. The document describes the resistors' construction, electrical and environmental specifications, and ordering information.
Hos
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
Hte
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the series with part numbers like R0003 and R0005. The resistors have power ratings from 1.5W to 4W at temperatures from 70C to 100C, tolerances from ±0.25% to ±5%, and resistance values from 0.3 to 10 mohm. The document provides details on dimensions, derating curves, testing standards, packaging, and other specifications.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
More Related Content
What's hot
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Hfom
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms
- Two mounting configurations (Types A and B) and dimensions
- Derating curve showing linearly derated power dissipation down to 0% at 350°C
- Electrical specifications including tolerance, voltage rating, insulation resistance, temperature range and coefficient
- Marking, packaging and ordering information examples
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english
This document provides information on HTR's wire wound resistors, including their silicone/cement coated HFO series precision power resistors. It lists specifications such as power ratings from 30W to 125W, resistance ranges from 10 to 33K ohms, dimensions, derating curve, packaging information, and electrical specifications. Key details include linear derating of full power dissipation down to zero from 70°C to 350°C ambient temperature, resistance tolerances of ±10% or ±5%, and passing AEC-Q200 qualification.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english...
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 125W and resistance ranges from 10 to 33K ohms
- Dimensions and derating curve for resistors
- Marking, packaging, and specification details for the resistors
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W ratings.
- Electrical characteristics including tolerance, temperature coefficient, and environmental test results.
- Mounting and derating guidelines including temperature rise curves for different resistance values.
- Packaging and storage requirements for bulk and reel packaging configurations.
HEB - LOW OHM BATTERY SHUNT RESISTORS
This document summarizes the specifications of low ohm battery shunt resistors. The resistors come in open frame designs and power ratings from 6W to 36W with resistance values from R00005 to R001. They are used for current sensing applications in vehicles and equipment. The document provides details on dimensions, electrical characteristics, packaging, ordering information, and power derating curves.
Htr india-products-current-sense-resistors-hew-english.pdf
The document summarizes specifications for low ohm current sense resistors. It describes the resistors as having an open frame PCB mounting design with edge welding for a reduced footprint and negligible inductance. Resistance ranges from 0.0025 to 10 ohms with power ratings from 1W to 5W. The resistors have a very low temperature coefficient of resistance and meet various reliability tests for electrical and environmental characteristics.
Htr india-products-current-sense-resistors-electron-beam-welded-hbe-english
This document describes low ohm power resistors in the HBE series from HTR. The resistors are open frame electron beam welded components available in resistance values from R0002 to R005. They have power ratings from 2W to 7W at temperatures from 70C to 100C and are qualified for automotive and power applications requiring high current capability. The document provides details on specifications, performance characteristics, packaging, and ordering information.
Htr india-products-surface-mount-hcas-english.pdf
This document summarizes the specifications for HTR's HCAS series surface mount ceramic encased wirewound resistors. It includes details on power ratings, resistance ranges, dimensions, electrical characteristics like resistance tolerance and operating temperature range, and environmental test results. The resistors are available in different versions including fusible safety and non-inductive winding, and can be ordered in bulk or tape and reel packing.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english.pdf
This document provides information on ceramic encased fusible resistors from the FRC series. The resistors are designed to fuse or blow as a safety measure if subjected to an abnormal spike in voltage or current. They are available in power ratings from 1W to 3W and resistance values from 10R to 750R. The document describes the resistors' construction, electrical and environmental specifications, and ordering information.
Hos
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
Hte
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the series with part numbers like R0003 and R0005. The resistors have power ratings from 1.5W to 4W at temperatures from 70C to 100C, tolerances from ±0.25% to ±5%, and resistance values from 0.3 to 10 mohm. The document provides details on dimensions, derating curves, testing standards, packaging, and other specifications.
What's hot (19)
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfo-english...
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
Htr india-products-current-sense-resistors-hew-english.pdf
Htr india-products-current-sense-resistors-hew-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hbe-english
Htr india-products-current-sense-resistors-electron-beam-welded-hbe-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english.pdf
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf (20)
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
Recently uploaded
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Recently uploaded (20)
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
- 1. 1K0 1K125 2K0 5K0 7K5 10K (All in tolerances of 20%, 10% & 5%) AUTOMOTIVE RESISTIVE DEVICES HANS-C SERIES NOISE SUPPRESSOR RESISTORS • Noise suppressor wire wound resistor • Reduces RFI during electrical discharges on petrol engines in cars and in scooters / motorcycles. • ROHS compliant. e : info@htr-india.com www.htr-india.comRev Date : 22/05/2019 AEC-Q200Qualified
- 2. MECHANICAL SPECIFICATION HTR Type Resistance Value D1 (+/-0.1) Typical Inductance L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm) NSC 1K0 1K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 1K125 1K125 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 2K0 2K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 5K0 5K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 7K5 7K5 15.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 10K 10K 18.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) ELECTRICAL SPECIFICATION Nominal Value : NSC 1K0 - 1K0 NSC 1K125 - 1K125 NSC 2K0 - 2K0 NSC 5K0 - 5K0 NSC 7K5 - 7K5 NSC 10K - 10K Tolerance : ± 20% / ± 10% / ± 5% AUTOMOTIVE RESISTIVE DEVICES HANS-C 2. PERFORMANCE REQUIREMENTS PARAMETER REQUIREMENTS Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2% Operating Temperature Range -40°C to 220°C Temperature Co-efficient (Typical) ± 150 ppm / °C High Voltage Pulses At High Frequency : (15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1 sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical) TYPICAL APPLICATIONS : ORDERING INFORMATION Series HTR Type Length Tolerance HANS-C NSC 5K0* 18.0 20% (M) e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 Length Range “*”Please specify length required GREEN COATING L The HANS-C series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI), which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug leads can ensure compliance. MARKING : NO MARKING PACKING : 2000 pcs / small box of approx size 310 mm x 205 mm x 95 mm.