HANS C
•
0 likes•10 views
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Report
Share
Report
Share
Download to read offline
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
dual band gsm booster Dolphin automation & Technology
Mobile Signal Booster For all Network All gsm -Airtel vodafone bsnl mtnl uninor loop smart reliance network tatadocomo all in one
Rsf electronik incremental_rotary_encoder_dg119_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder has up to 5400 lines per revolution and operates at rotational speeds up to 12,000 rpm. It has an aluminum housing, stainless steel shaft, and IP65 sealing. Electrical data includes support for 5V or 10-30V power supply, 60-200mA power consumption, and 160kHz sampling rate. Dimensions are provided.
Catalogo de antenas moyano
This document provides specifications for various mobile communication antennas that operate in the CDMA800, GSM900, DCS, PCS and UMTS bands. It lists over 150 antenna models including omnidirectional collinear antennas, directional panel antennas, base station antennas, and tri-band antennas. The document provides technical details like frequency range, gain, beamwidth, power handling, dimensions and other specifications for each antenna model.
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists details such as the encoder's dimensions, housing material, shaft specifications, maximum rotational speed, operating temperature range, sealing rating, EMC compliance, electrical specifications including supply voltage and power consumption, output signals, sampling rate, and included cable length. It can encode up to 5400 lines per revolution and has a maximum shaft load of 10N axially and 20N radially.
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
dual band gsm booster Dolphin automation & Technology
Mobile Signal Booster For all Network All gsm -Airtel vodafone bsnl mtnl uninor loop smart reliance network tatadocomo all in one
Rsf electronik incremental_rotary_encoder_dg119_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder has up to 5400 lines per revolution and operates at rotational speeds up to 12,000 rpm. It has an aluminum housing, stainless steel shaft, and IP65 sealing. Electrical data includes support for 5V or 10-30V power supply, 60-200mA power consumption, and 160kHz sampling rate. Dimensions are provided.
Catalogo de antenas moyano
This document provides specifications for various mobile communication antennas that operate in the CDMA800, GSM900, DCS, PCS and UMTS bands. It lists over 150 antenna models including omnidirectional collinear antennas, directional panel antennas, base station antennas, and tri-band antennas. The document provides technical details like frequency range, gain, beamwidth, power handling, dimensions and other specifications for each antenna model.
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists details such as the encoder's dimensions, housing material, shaft specifications, maximum rotational speed, operating temperature range, sealing rating, EMC compliance, electrical specifications including supply voltage and power consumption, output signals, sampling rate, and included cable length. It can encode up to 5400 lines per revolution and has a maximum shaft load of 10N axially and 20N radially.
POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
Rutherford 10R1 Data Sheet
Buy the Rutherford 10R1 at JMAC Supply.
https://www.jmac.com/Rutherford_Controls_10R1_p/rutherford-10r1.htm?=slideshare
Powerwave 7785.00
This document provides specifications for the Powerwave Triple Broadband Antennas. It lists technical details such as frequency ranges from 824-960 MHz and 1710-2170 MHz, a gain of 17.3/15.2 dBi, horizontal beam width of 65 degrees, and dimensions of 2658x280x125mm. It also includes mechanical details like a weight of 27.7kg with brackets, maximum wind speed of 42m/s, and operating temperature range of -40 to +60 degrees Celsius. Electrical specifications include VSWR of 1.5:1, front-to-back ratio above 25dB, and power handling of 300W average per input.
Nec ampacities
The document contains tables and notes from the 2002 National Electrical Code specifying allowable ampacities (current carrying capacities) of insulated copper and aluminum conductors rated from 0 to 2000 volts. The tables provide ampacity values for different conductor sizes, temperature ratings, numbers of current carrying conductors, and ambient temperatures. Notes provide additional guidance on temperature ratings, maximum conductor sizes, derating factors for bundled conductors, and allowable ampacities for service entrance and feeder conductors for dwelling units.
AJEET GUPTA
This document discusses the installation and configuration of GSM and CDMA base station sites. It includes information on:
1) The components of a GSM network architecture including the mobile station, base transceiver station, base station controller, mobile switching center, and other elements.
2) The different types of base station sites including BSNL sites, non-BSNL sites, shelter sizes, and tower types.
3) Configuring and initializing the base transceiver station, including antenna installation and configuration, frequency and power management, and traffic management.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Allgon dualband antenna specification
This document provides information on Allgon's 2100 MHz dual polarized antennas, including specifications for singleband and dualband antenna models. Key details include antenna gains ranging from 15.5 to 18 dBi, beamwidths of 65 degrees, VSWR and isolation values, mechanical specifications, typical radiation patterns, and filters for 1800/2100 MHz dualband operation.
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...Thorne & Derrick International
This document provides information about electrical test equipment from Seaward Group, including:
- Low voltage and high voltage test tools for electrical installations from distribution cables to plug sockets.
- Multi-function and single-function installation testers, high voltage indicators, proving units, and accessories.
- Details on specific products like the PowerTest 1557 multi-function installation tester, IRT 1557 insulation and continuity tester, ERT 1557 earth resistance tester, and PowerCheck 1557 verification unit.
- Seaward offers over 70 years of experience in electrical test instrumentation and provides a complete testing and measurement solution with service, calibration, and support.SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
Rsf electronik incremental_rotary_encoder_dg118_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 118. It lists details such as the encoder can measure up to 5400 lines per revolution, has integrated times 5 or times 10 subdividing electronics as an option, and mechanical specifications for dimensions, housing material, shaft material and load limits. It also details the encoder's operating temperature range, sealing level, EMC compliance, electrical specifications for supply voltage, power consumption, output signals and sampling rates.
Rsf electronik incremental_rotary_encoder_dg120_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 120. It lists details such as dimensions, mechanical properties including shaft dimensions and load ratings, operating temperature range, sealing rating, supply voltage options and electrical output specifications including reference mark frequency and output current. It also notes optional integrated times 5 or 10 subdividing electronics and includes contact information for the manufacturer.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
More Related Content
What's hot
POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
Rutherford 10R1 Data Sheet
Buy the Rutherford 10R1 at JMAC Supply.
https://www.jmac.com/Rutherford_Controls_10R1_p/rutherford-10r1.htm?=slideshare
Powerwave 7785.00
This document provides specifications for the Powerwave Triple Broadband Antennas. It lists technical details such as frequency ranges from 824-960 MHz and 1710-2170 MHz, a gain of 17.3/15.2 dBi, horizontal beam width of 65 degrees, and dimensions of 2658x280x125mm. It also includes mechanical details like a weight of 27.7kg with brackets, maximum wind speed of 42m/s, and operating temperature range of -40 to +60 degrees Celsius. Electrical specifications include VSWR of 1.5:1, front-to-back ratio above 25dB, and power handling of 300W average per input.
Nec ampacities
The document contains tables and notes from the 2002 National Electrical Code specifying allowable ampacities (current carrying capacities) of insulated copper and aluminum conductors rated from 0 to 2000 volts. The tables provide ampacity values for different conductor sizes, temperature ratings, numbers of current carrying conductors, and ambient temperatures. Notes provide additional guidance on temperature ratings, maximum conductor sizes, derating factors for bundled conductors, and allowable ampacities for service entrance and feeder conductors for dwelling units.
AJEET GUPTA
This document discusses the installation and configuration of GSM and CDMA base station sites. It includes information on:
1) The components of a GSM network architecture including the mobile station, base transceiver station, base station controller, mobile switching center, and other elements.
2) The different types of base station sites including BSNL sites, non-BSNL sites, shelter sizes, and tower types.
3) Configuring and initializing the base transceiver station, including antenna installation and configuration, frequency and power management, and traffic management.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Allgon dualband antenna specification
This document provides information on Allgon's 2100 MHz dual polarized antennas, including specifications for singleband and dualband antenna models. Key details include antenna gains ranging from 15.5 to 18 dBi, beamwidths of 65 degrees, VSWR and isolation values, mechanical specifications, typical radiation patterns, and filters for 1800/2100 MHz dualband operation.
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...Thorne & Derrick International
This document provides information about electrical test equipment from Seaward Group, including:
- Low voltage and high voltage test tools for electrical installations from distribution cables to plug sockets.
- Multi-function and single-function installation testers, high voltage indicators, proving units, and accessories.
- Details on specific products like the PowerTest 1557 multi-function installation tester, IRT 1557 insulation and continuity tester, ERT 1557 earth resistance tester, and PowerCheck 1557 verification unit.
- Seaward offers over 70 years of experience in electrical test instrumentation and provides a complete testing and measurement solution with service, calibration, and support.SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
Rsf electronik incremental_rotary_encoder_dg118_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 118. It lists details such as the encoder can measure up to 5400 lines per revolution, has integrated times 5 or times 10 subdividing electronics as an option, and mechanical specifications for dimensions, housing material, shaft material and load limits. It also details the encoder's operating temperature range, sealing level, EMC compliance, electrical specifications for supply voltage, power consumption, output signals and sampling rates.
Rsf electronik incremental_rotary_encoder_dg120_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 120. It lists details such as dimensions, mechanical properties including shaft dimensions and load ratings, operating temperature range, sealing rating, supply voltage options and electrical output specifications including reference mark frequency and output current. It also notes optional integrated times 5 or 10 subdividing electronics and includes contact information for the manufacturer.
What's hot (11)
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...
Seaward KD1E High Voltage HV Indicators & Detectors, Phasing Units, Ammeters ...
Rsf electronik incremental_rotary_encoder_dg118_specsheet
Rsf electronik incremental_rotary_encoder_dg118_specsheet
Rsf electronik incremental_rotary_encoder_dg120_specsheet
Rsf electronik incremental_rotary_encoder_dg120_specsheet
Similar to HANS C
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
HHE - Low OHM Power Resistors
This document summarizes the specifications and characteristics of HHE series low ohm power resistors:
- Open frame electron beam welded resistors available in power ratings from 4W to 10W and resistance values from R0003 to R002.
- Suitable for applications requiring high current carrying capability like power tools, automotive power modules, and frequency converters.
- Features include constant power output at high temperatures, sturdy copper connectors, and excellent long-term stability.
Similar to HANS C (20)
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Recently uploaded
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
ScyllaDB Tablets: Rethinking Replication
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
Під час доповіді відповімо на питання, навіщо потрібно підвищувати продуктивність аплікації і які є найефективніші способи для цього. А також поговоримо про те, що таке кеш, які його види бувають та, основне — як знайти performance bottleneck?
Відео та деталі заходу: https://bit.ly/45tILxj
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Introducing BoxLang : A new JVM language for productivity and modularity!
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation Functions to Prevent Interaction with Malicious QR Codes.
Aim of the Study: The goal of this research was to develop a robust hybrid approach for identifying malicious and insecure URLs derived from QR codes, ensuring safe interactions.
This is achieved through:
Machine Learning Model: Predicts the likelihood of a URL being malicious.
Security Validation Functions: Ensures the derived URL has a valid certificate and proper URL format.
This innovative blend of technology aims to enhance cybersecurity measures and protect users from potential threats hidden within QR codes 🖥 🔒
This study was my first introduction to using ML which has shown me the immense potential of ML in creating more secure digital environments!
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
Discover the Unseen: Tailored Recommendation of Unwatched Content
The session shares how JioCinema approaches ""watch discounting."" This capability ensures that if a user watched a certain amount of a show/movie, the platform no longer recommends that particular content to the user. Flawless operation of this feature promotes the discover of new content, improving the overall user experience.
JioCinema is an Indian over-the-top media streaming service owned by Viacom18.
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Gursev Pirge, PhD
Senior Data Scientist - JohnSnowLabs
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Recently uploaded (20)
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Introducing BoxLang : A new JVM language for productivity and modularity!
Introducing BoxLang : A new JVM language for productivity and modularity!
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
Discover the Unseen: Tailored Recommendation of Unwatched Content
Discover the Unseen: Tailored Recommendation of Unwatched Content
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
HANS C
- 1. 1K0 1K125 2K0 5K0 7K5 10K (All in tolerances of 20%, 10% & 5%) AUTOMOTIVE RESISTIVE DEVICES HANS-C SERIES NOISE SUPPRESSOR RESISTORS • Noise suppressor wire wound resistor • Reduces RFI during electrical discharges on petrol engines in cars and in scooters / motorcycles. • ROHS compliant. e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 AEC-Q200Qualified
- 2. MECHANICAL SPECIFICATION HTR Type Resistance Value D1 (+/-0.1) Typical Inductance L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm) NSC 1K0 1K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 1K125 1K125 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 2K0 2K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 5K0 5K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 7K5 7K5 15.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 10K 10K 18.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) ELECTRICAL SPECIFICATION Nominal Value : NSC 1K0 - 1K0 NSC 1K125 - 1K125 NSC 2K0 - 2K0 NSC 5K0 - 5K0 NSC 7K5 - 7K5 NSC 10K - 10K Tolerance : ± 20% / ± 10% / ± 5% AUTOMOTIVE RESISTIVE DEVICES HANS-C 2. PERFORMANCE REQUIREMENTS PARAMETER REQUIREMENTS Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2% Operating Temperature Range -40°C to 220°C Temperature Co-efficient (Typical) ± 150 ppm / °C High Voltage Pulses At High Frequency : (15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1 sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical) TYPICAL APPLICATIONS : ORDERING INFORMATION Series HTR Type Length Tolerance HANS-C NSC 5K0* 18.0 20% (M) e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 Length Range “*”Please specify length required GREEN COATING L The HANS-C series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI), which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug leads can ensure compliance. MARKING : NO MARKING PACKING : 2000 pcs / small box of approx size 310 mm x 205 mm x 95 mm.