Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
•
0 likes•14 views
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Report
Share
Report
Share
Download to read offline
Recommended
HSVA/HSVAU
This document provides information on HSVA/HSVAU series wire wound resistors. It includes specifications for 14 models ranging from 4W to 17W, with dimensions, resistance ranges, and typical weights listed. Key characteristics described are power rating at 70°C, resistance tolerances from ±10% to ±1%, a temperature range of -55°C to +350°C, and voltage and overload ratings. Environmental testing results for temperature cycling, damp heat, and endurance are also summarized.
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W ratings.
- Electrical characteristics including tolerance, temperature coefficient, and environmental test results.
- Mounting and derating guidelines including temperature rise curves for different resistance values.
- Packaging and storage requirements for bulk and reel packaging configurations.
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-silicone-coated-resistors-wire-wound-resistors-frs-english...
This document describes fusible resistors that are designed to fuse or blow if subjected to abnormal voltage/current spikes or circuit malfunctions. It provides details on fusible resistor types, dimensions, resistance ranges, performance specifications, and applications. Fusible resistors are tailor-made to function as normal resistors under normal conditions but fuse as a safety measure under overload or fault conditions.
Recommended
HSVA/HSVAU
This document provides information on HSVA/HSVAU series wire wound resistors. It includes specifications for 14 models ranging from 4W to 17W, with dimensions, resistance ranges, and typical weights listed. Key characteristics described are power rating at 70°C, resistance tolerances from ±10% to ±1%, a temperature range of -55°C to +350°C, and voltage and overload ratings. Environmental testing results for temperature cycling, damp heat, and endurance are also summarized.
Htr india-products-current-sense-resistors-electron-beam-welded-hos-english
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W ratings.
- Electrical characteristics including tolerance, temperature coefficient, and environmental test results.
- Mounting and derating guidelines including temperature rise curves for different resistance values.
- Packaging and storage requirements for bulk and reel packaging configurations.
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-silicone-coated-resistors-wire-wound-resistors-frs-english...
This document describes fusible resistors that are designed to fuse or blow if subjected to abnormal voltage/current spikes or circuit malfunctions. It provides details on fusible resistor types, dimensions, resistance ranges, performance specifications, and applications. Fusible resistors are tailor-made to function as normal resistors under normal conditions but fuse as a safety measure under overload or fault conditions.
Hfom
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms
- Two mounting configurations (Types A and B) and dimensions
- Derating curve showing linearly derated power dissipation down to 0% at 350°C
- Electrical specifications including tolerance, voltage rating, insulation resistance, temperature range and coefficient
- Marking, packaging and ordering information examples
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
The document describes HTR's HIP series of silicone coated, wire wound resistors. The resistors are available in power ratings from 3W to 10W and resistance values from R01 to 90K ohms. They have PCB-type terminations for easy wave soldering. Key features include flame retardant silicone coating, resistance to soldering heat, high overload voltage tolerance, and stable resistance over temperature. Applications include use in TVs, monitors, and audio equipment. Ordering information is provided for standard and RoHS compliant models.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hfom.pdf
This document provides information on HTR's wire wound resistors of the HFOM series. It specifies the power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms. The resistors are available in two mounting configurations and dimensions are provided. Electrical specifications include temperature range of -40 to 250 degrees C, tolerance of ±10% or ±5%, and insulation resistance greater than 1000M ohms.
Htr india-products-surface-mount-hcas-english.pdf
This document summarizes the specifications for HTR's HCAS series surface mount ceramic encased wirewound resistors. It includes details on power ratings, resistance ranges, dimensions, electrical characteristics like resistance tolerance and operating temperature range, and environmental test results. The resistors are available in different versions including fusible safety and non-inductive winding, and can be ordered in bulk or tape and reel packing.
Htr india-products-surface-mount-resistors-hcals-english.pdf
This document provides information on ceramic encased surface mount resistors. It describes the key specifications including power ratings from 2W to 3W, resistance ranges from R001 to R10, operating temperature ranges from -55°C to +155°C or +275°C, and tolerance levels from ±10% to ±1%. Dimensions and recommended pad sizes are provided for mounting. Electrical, environmental, and mechanical test data are also specified, along with ordering information fields.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Hans c - 220519
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
More Related Content
What's hot
Hfom
This document provides information on HTR's wire wound resistors including:
- Power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms
- Two mounting configurations (Types A and B) and dimensions
- Derating curve showing linearly derated power dissipation down to 0% at 350°C
- Electrical specifications including tolerance, voltage rating, insulation resistance, temperature range and coefficient
- Marking, packaging and ordering information examples
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
The document describes HTR's HIP series of silicone coated, wire wound resistors. The resistors are available in power ratings from 3W to 10W and resistance values from R01 to 90K ohms. They have PCB-type terminations for easy wave soldering. Key features include flame retardant silicone coating, resistance to soldering heat, high overload voltage tolerance, and stable resistance over temperature. Applications include use in TVs, monitors, and audio equipment. Ordering information is provided for standard and RoHS compliant models.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hfom.pdf
This document provides information on HTR's wire wound resistors of the HFOM series. It specifies the power ratings from 30W to 200W and resistance ranges from 10 to 40K ohms. The resistors are available in two mounting configurations and dimensions are provided. Electrical specifications include temperature range of -40 to 250 degrees C, tolerance of ±10% or ±5%, and insulation resistance greater than 1000M ohms.
Htr india-products-surface-mount-hcas-english.pdf
This document summarizes the specifications for HTR's HCAS series surface mount ceramic encased wirewound resistors. It includes details on power ratings, resistance ranges, dimensions, electrical characteristics like resistance tolerance and operating temperature range, and environmental test results. The resistors are available in different versions including fusible safety and non-inductive winding, and can be ordered in bulk or tape and reel packing.
Htr india-products-surface-mount-resistors-hcals-english.pdf
This document provides information on ceramic encased surface mount resistors. It describes the key specifications including power ratings from 2W to 3W, resistance ranges from R001 to R10, operating temperature ranges from -55°C to +155°C or +275°C, and tolerance levels from ±10% to ±1%. Dimensions and recommended pad sizes are provided for mounting. Electrical, environmental, and mechanical test data are also specified, along with ordering information fields.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
What's hot (17)
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hip-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
Htr india-products-surface-mount-resistors-hcals-english.pdf
Htr india-products-surface-mount-resistors-hcals-english.pdf
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Hans c - 220519
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
HANS C
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
HHE - Low OHM Power Resistors
This document summarizes the specifications and characteristics of HHE series low ohm power resistors:
- Open frame electron beam welded resistors available in power ratings from 4W to 10W and resistance values from R0003 to R002.
- Suitable for applications requiring high current carrying capability like power tools, automotive power modules, and frequency converters.
- Features include constant power output at high temperatures, sturdy copper connectors, and excellent long-term stability.
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-s-english (20)
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
Recently uploaded
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
欧洲杯投注-欧洲杯投注冠军赔率-欧洲杯投注夺冠赔率|【网址🎉ac55.net🎉】
【网址🎉ac55.net🎉】欧洲杯投注是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯投注。欧洲杯投注现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
学校原版办理【微信号:176555708】【学校原版办理(RMIT毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
不能毕业办理【微信号:176555708】【不能毕业办理(USQ毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UTS文凭证书)悉尼科技大学毕业证快速办理
了解办理留学学历【微信:176555708】【(UTS毕业证书)悉尼科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Unlimited Short Call Girls Delhi ✅ 9711199012 FULL CASH PAYMENT
Unlimited Short Call Girls Delhi ✅ 9711199012 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Automotive Engine Valve Manufacturing Plant Project Report.pptx
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
car rentals in nassau bahamas | atv rental nassau bahamas
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
欧洲杯足彩-滚球欧洲杯足彩-欧洲杯足彩滚球平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯足彩是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。欧洲杯足彩平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，欧洲杯足彩对业界的影响力可见一斑。
定制(london学位证书)英国伦敦大学毕业证本科学历原版一模一样
原版定制【微信:bwp0011】《(london学位证书)英国伦敦大学毕业证本科学历》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
美洲杯买球-美洲杯买球在哪里押注-美洲杯买球在哪里投注|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】美洲杯买球是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。美洲杯买球平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，美洲杯买球对业界的影响力可见一斑。
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】世预赛下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。世预赛下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，世预赛下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas
Descripción técnica del cargador frontal Volvo L350 F
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
退学办理【微信号:176555708】【退学办理(Curtin毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Unlimited Short Call Girls Delhi ✅ 9711199012 FULL CASH PAYMENT
Unlimited Short Call Girls Delhi ✅ 9711199012 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Annual report on mahindra and mahindra on supply chain analysisdf
Annual report on mahindra and mahindra on supply chain analysisdf
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Automotive Engine Valve Manufacturing Plant Project Report.pptx
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
- 1. 1K0 1K125 2K0 5K0 7K5 10K (All in tolerances of 20%, 10% & 5%) AUTOMOTIVE RESISTIVE DEVICES HANS-S SERIES NOISE SUPPRESSOR RESISTORS • Noise suppressor wire wound resistor • Reduces RFI during electrical discharges on petrol engines in cars and in scooters / motorcycles. • ROHS compliant. e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 AEC-Q200Qualified
- 2. MECHANICAL SPECIFICATION HTR Type Resistance Value D1 (+/-0.1) Typical Inductance L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm) NSS 1K0 1K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSS 1K125 1K125 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSS 2K0 2K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSS 5K0 5K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSS 7K5 7K5 15.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSS 10K 10K 18.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) ELECTRICAL SPECIFICATION Nominal Value : NSS 1K0 - 1K0 NSS 1K125 - 1K125 NSS 2K0 - 2K0 NSS 5K0 - 5K0 NSS 7K5 - 7K5 NSS 10K - 10K Tolerance : ± 20% / ± 10% / ± 5% AUTOMOTIVE RESISTIVE DEVICES HANS-S 2. PERFORMANCE REQUIREMENTS PARAMETER REQUIREMENTS Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2% Operating Temperature Range -40°C to 220°C Temperature Co-efficient (Typical) ± 150 ppm / °C High Voltage Pulses At High Frequency : (15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1 sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical) TYPICAL APPLICATIONS : The HANS-S series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI), which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug leads can ensure compliance. MARKING : NO MARKING PACKING : 2000 pcs / small box of approx size 310 mm x 205 mm x 95 mm. ORDERING INFORMATION Series HTR Type Length Tolerance HANS-S NSS 5K0* 18.0 20% (M) e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 Length Range “*”Please specify length required L STAINLESS STEEL CAPS