Hans c - 220519
•
0 likes•168 views
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Report
Share
Report
Share
Download to read offline
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
This document describes a series of current sense resistors called OFSC resistors. They are available in 5W and 10W power ratings with resistance values ranging from 0.001 ohm to 0.003 ohm for 5W resistors and 0.0004 ohm to 0.003 ohm for 10W resistors. The resistors have four termination points to minimize inductance and are coated in flame retardant silicone for protection. They are qualified for use in applications according to the AEC-Q200 standard and can withstand temperatures from -55°C to 275°C.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfp-english...
This document describes silicone coated wire wound resistors. Key details include:
- Resistors come in various models (F-2P to F-8P) with power ratings from 2.5W to 8W and resistance ranges from 10-56k ohms.
- They have a silicone flame retardant coating and various terminal options for compatibility with wave soldering.
- Specifications cover electrical characteristics, temperature rise, and mechanical specifications for resistance, voltage rating, and environmental testing.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-english.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire-wound and able to withstand high voltage pulses, temperature ranges from -40 to 220C, and overloads up to 5 times the rated power for short durations. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
This document provides information on HSV series ceramic encased wire wound resistors made by HTR. Key details include:
- Resistors are made with an alloy wire wound element on a fiberglass or ceramic substrate within a ceramic housing.
- Models range from 4W to 17W and resistances from R04 to 82K ohms with tolerance options.
- Units can be vertically mounted with straight, cropped leads, or mounting pillars.
- Specifications include temperature range, voltage rating, resistance change limits for overload and environmental testing.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
This document describes a series of current sense resistors called OFSC resistors. They are available in 5W and 10W power ratings with resistance values ranging from 0.001 ohm to 0.003 ohm for 5W resistors and 0.0004 ohm to 0.003 ohm for 10W resistors. The resistors have four termination points to minimize inductance and are coated in flame retardant silicone for protection. They are qualified for use in applications according to the AEC-Q200 standard and can withstand temperatures from -55°C to 275°C.
Hbm
This document summarizes the specifications of HBM series low ohm power resistors. The resistors provide 5 watts of permanent power output, can supply up to 100 amps of constant current, have a four terminal configuration, and excellent long-term stability. They are RoHS and REACH compliant and qualified to the AEC-Q200 standard. Resistance values range from 0.0003 to 0.005 ohms with tolerance options of 1%, 3%, or 5%.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfp-english...
This document describes silicone coated wire wound resistors. Key details include:
- Resistors come in various models (F-2P to F-8P) with power ratings from 2.5W to 8W and resistance ranges from 10-56k ohms.
- They have a silicone flame retardant coating and various terminal options for compatibility with wave soldering.
- Specifications cover electrical characteristics, temperature rise, and mechanical specifications for resistance, voltage rating, and environmental testing.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hta-english...
This document describes HTA series silicone coated wire wound resistors. Key details include:
- Resistors have flame retardant silicone coating, come in power ratings from 0.75W to 12W, and tolerances as close as 1%.
- They have applications in industrial, electrical, and electronic equipment and can operate at temperatures up to 350°C.
- The resistors meet various standards including JSS-50402 and IEC and are tested for characteristics like temperature cycling, voltage proof, and mechanical robustness.
OA/OP
This document provides specifications for current sense resistors in HTR's OA and OP series. The OA series consists of axial leaded resistors from 1W to 3W, while the OP series are surface mount resistors from 0.5W to 5W. Both series offer resistance values from a few milliohms to 100 ohms with temperature coefficients as low as ±60ppm/°C. The document provides detailed electrical, mechanical, and environmental ratings and test results. Typical applications include current sensing in power supplies, instruments, and regulators.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hos
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-rsr-english
This document describes silicone coated wire wound power resistors. Key details include:
- Resistors come in various wattage ratings from 40W to 600W and resistance values from R05 to 20R.
- They have flame retardant silicone coatings and various termination options compatible with connector standards.
- Dimensions, electrical characteristics, and mounting specifications are provided for the different models.
- The resistors are designed to withstand heavy overloads and are suitable for applications requiring high dissipation like motor controls.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
Htr india-products-surface-mount-resistor-rls-english.pdf
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
This document summarizes the specifications of HTR's ceramic encased wire wound resistors. The resistors feature a ceramic housing, inorganic fire retardant encapsulant, and plated stainless steel mounting brackets. They are rated for temperatures up to 350°C and powers ranging from 10W to 40W. The resistors offer resistance values from 10 ohms to 68k ohms and meet various industry standards and certifications for electrical, mechanical, and environmental performance. They are suitable for industrial applications requiring high temperature operation and vibration resistance.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
HIAS - SURFACE MOUNT SILICONE COATED TYPE
This document provides information on alloy resistance wire wound resistors that are suitable for reflow soldering. It includes specifications for silicone coated surface mount resistors in the HIAS series, such as power ratings, resistance ranges, dimensions, electrical characteristics, and ordering information. Mounting recommendations and test methods for parameters like resistance to soldering heat and solderability are also specified.
Hre
This document provides information about low ohm power resistors made by HTR India. It includes specifications for resistance values and tolerances, power ratings at different temperatures, dimensions, applications like current sensors and power modules, features like maximum current capacity and solder temperature resistance, recommended layout and solder profile, electrical and environmental test results, derating curves, ordering information examples, and packaging in bulk boxes or tape and reel. The resistors are open frame welded designs for applications requiring high current capacity.
HEE - Low OHM Power Resistors
This document provides information on low ohm power resistors in the HEE series from HTR. It includes specifications for 8 resistor models including their power ratings at 100C and 70C, dimensions, resistance values, tolerances, and other electrical and mechanical characteristics. The document also provides recommended applications, features, packaging, ordering information and derating curves.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
This document describes an alloy resistance element product called the BR series. It is a ceramic encased current sense/low ohm resistor with features like low inductance, fire retardant encapsulant, and tin plated copper terminals. The resistor comes in different power ratings and resistance ranges, and can be mounted in circuit boards. It has electrical and mechanical specifications to withstand conditions like high temperature, humidity, vibration, and more.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
More Related Content
What's hot
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hta-english...
This document describes HTA series silicone coated wire wound resistors. Key details include:
- Resistors have flame retardant silicone coating, come in power ratings from 0.75W to 12W, and tolerances as close as 1%.
- They have applications in industrial, electrical, and electronic equipment and can operate at temperatures up to 350°C.
- The resistors meet various standards including JSS-50402 and IEC and are tested for characteristics like temperature cycling, voltage proof, and mechanical robustness.
OA/OP
This document provides specifications for current sense resistors in HTR's OA and OP series. The OA series consists of axial leaded resistors from 1W to 3W, while the OP series are surface mount resistors from 0.5W to 5W. Both series offer resistance values from a few milliohms to 100 ohms with temperature coefficients as low as ±60ppm/°C. The document provides detailed electrical, mechanical, and environmental ratings and test results. Typical applications include current sensing in power supplies, instruments, and regulators.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Hos
This document provides specifications for HTR brand low ohm power resistors. It describes the physical dimensions and construction for different models ranging from 2W to 5W power ratings. It also outlines the electrical and environmental characteristics including temperature coefficient, load life testing results, and packaging and ordering information. Performance is ensured through various qualification tests.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-rsr-english
This document describes silicone coated wire wound power resistors. Key details include:
- Resistors come in various wattage ratings from 40W to 600W and resistance values from R05 to 20R.
- They have flame retardant silicone coatings and various termination options compatible with connector standards.
- Dimensions, electrical characteristics, and mounting specifications are provided for the different models.
- The resistors are designed to withstand heavy overloads and are suitable for applications requiring high dissipation like motor controls.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
This document summarizes wire wound ceramic encased resistors. It describes the HMV series of space saver vertical mount resistors with alloy wire elements encapsulated in ceramic cases. Key specifications listed include power ratings from 2.5W to 15W, resistance values from 4.7 ohms to 36k ohms, temperature range from -55C to 275C, and electrical and mechanical performance requirements. Typical applications are mentioned as color TVs, VCRs, printers, and power supplies.
Htr india-products-surface-mount-resistor-rls-english.pdf
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
This document summarizes the specifications of HTR's ceramic encased wire wound resistors. The resistors feature a ceramic housing, inorganic fire retardant encapsulant, and plated stainless steel mounting brackets. They are rated for temperatures up to 350°C and powers ranging from 10W to 40W. The resistors offer resistance values from 10 ohms to 68k ohms and meet various industry standards and certifications for electrical, mechanical, and environmental performance. They are suitable for industrial applications requiring high temperature operation and vibration resistance.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors are designed for current sense applications and meet various industry standards for electrical, thermal, and environmental performance.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
HIAS - SURFACE MOUNT SILICONE COATED TYPE
This document provides information on alloy resistance wire wound resistors that are suitable for reflow soldering. It includes specifications for silicone coated surface mount resistors in the HIAS series, such as power ratings, resistance ranges, dimensions, electrical characteristics, and ordering information. Mounting recommendations and test methods for parameters like resistance to soldering heat and solderability are also specified.
Hre
This document provides information about low ohm power resistors made by HTR India. It includes specifications for resistance values and tolerances, power ratings at different temperatures, dimensions, applications like current sensors and power modules, features like maximum current capacity and solder temperature resistance, recommended layout and solder profile, electrical and environmental test results, derating curves, ordering information examples, and packaging in bulk boxes or tape and reel. The resistors are open frame welded designs for applications requiring high current capacity.
HEE - Low OHM Power Resistors
This document provides information on low ohm power resistors in the HEE series from HTR. It includes specifications for 8 resistor models including their power ratings at 100C and 70C, dimensions, resistance values, tolerances, and other electrical and mechanical characteristics. The document also provides recommended applications, features, packaging, ordering information and derating curves.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
HOS - LOW OHM POWER RESISTORS
This document provides specifications for HOS series low ohm power resistors including:
- Physical dimensions and construction details for different models ranging from 2W to 5W and resistances from R001 to R05.
- Electrical characteristics including tolerance, temperature coefficient, load life testing results, and environmental resistance.
- Mounting and derating guidelines including temperature rise curves for different resistances.
- Packaging and storage requirements for bulk and reel packaging.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
This document describes an alloy resistance element product called the BR series. It is a ceramic encased current sense/low ohm resistor with features like low inductance, fire retardant encapsulant, and tin plated copper terminals. The resistor comes in different power ratings and resistance ranges, and can be mounted in circuit boards. It has electrical and mechanical specifications to withstand conditions like high temperature, humidity, vibration, and more.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
What's hot (20)
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hta-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hta-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-rsr-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-rsr-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmv-english.pdf
Htr india-products-surface-mount-resistor-rls-english.pdf
Htr india-products-surface-mount-resistor-rls-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
Similar to Hans c - 220519
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
The document describes specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, or 5%. Dimensions and electrical specifications are provided for each model. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines, and can help vehicles meet current emissions legislation.
Htr india-products-automotive-noise-suppressor-resistor-hans-english
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
Similar to Hans c - 220519 (20)
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
Recently uploaded
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
ScyllaDB monitoring provides a lot of useful information. But sometimes it’s not easy to find the root of the problem if something is wrong or even estimate the remaining capacity by the load on the cluster. This talk shares our team's practical tips on: 1) How to find the root of the problem by metrics if ScyllaDB is slow 2) How to interpret the load and plan capacity for the future 3) Compaction strategies and how to choose the right one 4) Important metrics which aren’t available in the default monitoring setup.
MySQL InnoDB Storage Engine: Deep Dive - Mydbops
This presentation, titled "MySQL - InnoDB" and delivered by Mayank Prasad at the Mydbops Open Source Database Meetup 16 on June 8th, 2024, covers dynamic configuration of REDO logs and instant ADD/DROP columns in InnoDB.
This presentation dives deep into the world of InnoDB, exploring two ground-breaking features introduced in MySQL 8.0:
• Dynamic Configuration of REDO Logs: Enhance your database's performance and flexibility with on-the-fly adjustments to REDO log capacity. Unleash the power of the snake metaphor to visualize how InnoDB manages REDO log files.
• Instant ADD/DROP Columns: Say goodbye to costly table rebuilds! This presentation unveils how InnoDB now enables seamless addition and removal of columns without compromising data integrity or incurring downtime.
Key Learnings:
• Grasp the concept of REDO logs and their significance in InnoDB's transaction management.
• Discover the advantages of dynamic REDO log configuration and how to leverage it for optimal performance.
• Understand the inner workings of instant ADD/DROP columns and their impact on database operations.
• Gain valuable insights into the row versioning mechanism that empowers instant column modifications.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Available 24/7
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Containers & AI - Beauty and the Beast!?!
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Keywords: AI, Containeres, Kubernetes, Cloud Native
Event Link: https://meine.doag.org/events/cloudland/2024/agenda/#agendaId.4211
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
"What does it really mean for your system to be available, or how to define w...
We will talk about system monitoring from a few different angles. We will start by covering the basics, then discuss SLOs, how to define them, and why understanding the business well is crucial for success in this exercise.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Recently uploaded (20)
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
"What does it really mean for your system to be available, or how to define w...
"What does it really mean for your system to be available, or how to define w...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Hans c - 220519
- 1. 1K0 1K125 2K0 5K0 7K5 10K (All in tolerances of 20%, 10% & 5%) AUTOMOTIVE RESISTIVE DEVICES HANS-C SERIES NOISE SUPPRESSOR RESISTORS • Noise suppressor wire wound resistor • Reduces RFI during electrical discharges on petrol engines in cars and in scooters / motorcycles. • ROHS compliant. e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 AEC-Q200Qualified
- 2. MECHANICAL SPECIFICATION HTR Type Resistance Value D1 (+/-0.1) Typical Inductance L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm) NSC 1K0 1K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 1K125 1K125 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 2K0 2K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 5K0 5K0 11.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 7K5 7K5 15.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) NSC 10K 10K 18.0 23.7 4.35 MIN 15 μH (at freq. 1 Mhz) ELECTRICAL SPECIFICATION Nominal Value : NSC 1K0 - 1K0 NSC 1K125 - 1K125 NSC 2K0 - 2K0 NSC 5K0 - 5K0 NSC 7K5 - 7K5 NSC 10K - 10K Tolerance : ± 20% / ± 10% / ± 5% AUTOMOTIVE RESISTIVE DEVICES HANS-C 2. PERFORMANCE REQUIREMENTS PARAMETER REQUIREMENTS Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2% Operating Temperature Range -40°C to 220°C Temperature Co-efficient (Typical) ± 150 ppm / °C High Voltage Pulses At High Frequency : (15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1 sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical) TYPICAL APPLICATIONS : ORDERING INFORMATION Series HTR Type Length Tolerance HANS-C NSC 5K0* 18.0 20% (M) e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 Length Range “*”Please specify length required GREEN COATING L The HANS-C series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI), which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug leads can ensure compliance. MARKING : NO MARKING PACKING : 2000 pcs / small box of approx size 310 mm x 205 mm x 95 mm.