The document provides a 14-step guide to replacing the charging port on an iPhone 6. It lists the necessary repair tools and replacement part needed. The steps include removing screws and brackets to access the charging port, disconnecting cables, and removing the old port. The final step is to insert the new charging port and reassemble the phone by reversing the order of steps.

1. How to Solve iPhone 6 Charging Port Issues
We'll make a short guide to reply the charging port for
iphone. 6. If someone's iphone charging port has this
problem, you can refer to this article. When you want to
DIF fix it, you must need some tools. In the process of
your iphone 6 charging port repair, if you need some
high quality and low price iphone maintenance tools, you
can try vipprogrammer.com.
What repair tools you need:
P2 Pentalobe screwdriver
Small Phillips screwdriver
Pry tool/spudger
Suction cup

2. Replacement iPhone 6 charging port/lightning connector
assembly
STEP 1: Remove the two screws adjacent to the charging
port.
STEP 2: Place the suction cup on the front screen,
toward the bottom, and lift so the front screen assembly
hinges at the top. You might need to use the pry tool or
spudger to gently pry it up at the bottom seam.
STEP 3: Remove the five front panel assembly cable
bracket screws, then remove the bracket.
STEP 4: Use the spudger or pry tool to disconnect the
front camera/sensor cable connector, home button cable
connector, digitizer cable connector, and display data
cable connector. You can now remove the front screen
assembly completely.
STEP 5: Remove the two battery connector bracket
screws, then remove the bracket.
STEP 6: Use the spudger or pry tool to disconnect the
battery connector, charging port assembly cable, and
antenna cable connector.
STEP 7: Remove the two speaker screws, then remove

3. the speaker.
STEP 8: Remove the two vibrator screws, then remove
the vibrator.
STEP 9: Remove the two charging port bracket screws,
then remove the bracket.
STEP 10: Remove the microphone bracket screw, then
remove the microphone bracket.
STEP 11: Remove the six charging port assembly
screws.
STEP 12: Use the spudger or pry tool to gently peel the
charging port assembly from its underlying adhesive,
working from the right side toward the headphone jack.
STEP 13: Use the spudger or pry tool to slide the
headphone jack out of its socket. You can now remove
the charging port assembly completely.
STEP 14: Insert the new charging port assembly, then
follow these steps in reverse order to reassemble your
iPhone 6.