different types of paint, 10 different types of paint, acrylic paint , automotive paint, epoxy paint, emulsion paint, enamel paint, concrete paint, eggshell paint, latex paint, metallic paint, texture paint, who introduced acrylic paint, types of automotive paint, ingredients used in concrete paint, paint types in India, paint types in US
The document discusses different types of paints used for various surfaces. It classifies paints based on factors such as the base used like oil, alkyd, latex, epoxy paints. It also discusses classification based on properties and functions like distempers, emulsion paints, texture paints, cement paints, enamel paints, primers, sealers. The document provides details on composition of different paints and desirable characteristics of good paints like spreading power, durability, ease of application and resistance to weathering. It also lists common defects in paints like bleeding, blistering, cracking and methods to prevent them.
This document provides information on different types of paints and their composition. It discusses 7 main categories of paint: oil paints, synthetic paints, emulsion paints, cellulose paints, varnishes, water paints (distemper), and special paints. It describes the composition and uses of different types of paints like oil paints, synthetic paints, emulsion paints, etc. The document also covers painting techniques like brush painting and spray painting, and common painting defects like bleeding, blistering, blooming, and methods to prevent or remedy them.
This document summarizes different types of pointing used in masonry, including flush, keyed or grooved, recessed, weathered, V-pointing, beaded, tuck, and struck pointing. It also discusses common paints used for protection and appearance, including their composition, properties, defects, and application process. Key components of paints listed are the body, vehicle, pigment, thinner, and dryers. The document concludes with describing characteristics of good varnishes and the steps for painting woodwork and applying enamel paint.
This document discusses different types of paints, including cement paints and enamel paints. It provides details on the key ingredients in cement paints, which is a mixture of Portland or white cement, lime, mineral extenders, and water repellent substances. Cement paint provides protection from UV rays, severe weather, and prevents fungus/bacteria growth on masonry surfaces. Enamel paint has a hard, glossy and opaque finish and is made from white lead or zinc white ground in oil and mixed with petroleum spirit and resinous matter. It can be applied to woodwork, plastered surfaces, and iron/steel surfaces.
What is pointing?
Scope of pointing
Method of pointing
What is plastering?
Objective of plastering
Lime plaster
Cement plaster
Gypsum plaster (plaster of Paris)
Water proof plaster of Mortar
Heat resistant plasters
Defects in plastering
1.Stretcher bond
2.Header bond
3.English bond and
4.Flemish bond.
This document provides an overview of different types of paints, varnishes, and distempers presented by five students to an assistant professor. It discusses the key constituents of oil paints like bases, fillers, pigments, vehicles, solvents, and driers. It also outlines the characteristics of a good paint and describes common bases, vehicles, coloring pigments, and types of paints like aluminum, anti-corrosive, asbestos, cement-based, enamel and oil paints. Further, it explains varnishes, types like oil, spar, flat, asphalt and spirit varnishes. It also discusses furniture polish, distempers, their application process and types like oil bound
different types of paint, 10 different types of paint, acrylic paint , automotive paint, epoxy paint, emulsion paint, enamel paint, concrete paint, eggshell paint, latex paint, metallic paint, texture paint, who introduced acrylic paint, types of automotive paint, ingredients used in concrete paint, paint types in India, paint types in US
The document discusses different types of paints used for various surfaces. It classifies paints based on factors such as the base used like oil, alkyd, latex, epoxy paints. It also discusses classification based on properties and functions like distempers, emulsion paints, texture paints, cement paints, enamel paints, primers, sealers. The document provides details on composition of different paints and desirable characteristics of good paints like spreading power, durability, ease of application and resistance to weathering. It also lists common defects in paints like bleeding, blistering, cracking and methods to prevent them.
This document provides information on different types of paints and their composition. It discusses 7 main categories of paint: oil paints, synthetic paints, emulsion paints, cellulose paints, varnishes, water paints (distemper), and special paints. It describes the composition and uses of different types of paints like oil paints, synthetic paints, emulsion paints, etc. The document also covers painting techniques like brush painting and spray painting, and common painting defects like bleeding, blistering, blooming, and methods to prevent or remedy them.
This document summarizes different types of pointing used in masonry, including flush, keyed or grooved, recessed, weathered, V-pointing, beaded, tuck, and struck pointing. It also discusses common paints used for protection and appearance, including their composition, properties, defects, and application process. Key components of paints listed are the body, vehicle, pigment, thinner, and dryers. The document concludes with describing characteristics of good varnishes and the steps for painting woodwork and applying enamel paint.
This document discusses different types of paints, including cement paints and enamel paints. It provides details on the key ingredients in cement paints, which is a mixture of Portland or white cement, lime, mineral extenders, and water repellent substances. Cement paint provides protection from UV rays, severe weather, and prevents fungus/bacteria growth on masonry surfaces. Enamel paint has a hard, glossy and opaque finish and is made from white lead or zinc white ground in oil and mixed with petroleum spirit and resinous matter. It can be applied to woodwork, plastered surfaces, and iron/steel surfaces.
What is pointing?
Scope of pointing
Method of pointing
What is plastering?
Objective of plastering
Lime plaster
Cement plaster
Gypsum plaster (plaster of Paris)
Water proof plaster of Mortar
Heat resistant plasters
Defects in plastering
1.Stretcher bond
2.Header bond
3.English bond and
4.Flemish bond.
This document provides an overview of different types of paints, varnishes, and distempers presented by five students to an assistant professor. It discusses the key constituents of oil paints like bases, fillers, pigments, vehicles, solvents, and driers. It also outlines the characteristics of a good paint and describes common bases, vehicles, coloring pigments, and types of paints like aluminum, anti-corrosive, asbestos, cement-based, enamel and oil paints. Further, it explains varnishes, types like oil, spar, flat, asphalt and spirit varnishes. It also discusses furniture polish, distempers, their application process and types like oil bound
Finishing works (Building Construction)Zairul Zaiky
This document discusses finishing works in building construction. It focuses on plastering as a type of wall finishing. Plastering functions to protect and cover basic work, produce a flat surface, protect from climate effects, provide a base for paint or tiles, increase durability, and provide comfort. Plastering of internal walls involves base and finish coat layers applied with trowels, while external walls involve thicker, rougher base and finish coats. Different types of materials like cement, lime, sand, and water are used for plastering. Floor finishes can also include tiles made from materials like thermoplastic, vinyl, cork, clay, quarry, and terrazzo.
This document appears to be marketing materials for a home siding product called CoolWall. It discusses common exterior home problems like cracking and moisture damage. It then presents CoolWall as a product that can prevent these issues through barriers like siding that protect against water, weather, and pollutants. Test results are cited showing CoolWall remains effective for over 10 years. Frequently asked questions are answered about CoolWall's benefits over competing products and its coating and reapplication process. Charts compare the long-term costs of maintaining CoolWall versus traditional painting.
This document provides flooring material recommendations for different areas of a building. For areas requiring fire resistance, it recommends concrete flooring sealed with polyurethane. For bathrooms, it recommends porcelain floor tiles. For the lounge, it recommends thick carpet. For lobbies and offices, it recommends cork flooring sealed with polyurethane. For kitchens and storage areas, it recommends resilient vinyl plank flooring sealed with polyurethane. The recommendations include product names, sizes, and protective polyurethane coatings tailored to each area's needs.
Exterior Portland Cement Plaster AssembliesBryan Stanley
This document provides an overview of the Technical Services Information Bureau (TSIB). It discusses the history of TSIB, which traces back to 1929. It outlines the services TSIB provides, including trade promotion, education, research, code development, and technical consulting. The document then discusses various exterior plaster wall and ceiling systems, including substrates like masonry, wood framing, and metal stud framing. It covers topics like exterior sheathing, weather-resistant barriers, lath accessories, and plaster finishes.
Types of wall paints are discussed, including emulsion paint, distemper paint, enamel paints, wood finishes, primers, putties, aluminium paint, texture paints, cement paint, and synthetic enamel. Different types of paint are suitable for different surfaces like walls, wood, metal, and floors. Proper preparation of the surface is important before painting, such as cleaning, repairing cracks, and checking for moisture. Multiple thin coats are typically recommended for best results with drying time between coats.
This document provides summaries of two types of exterior wall assemblies: thin-stone veneer and cavity wall construction with brick on concrete masonry units. For each assembly, it discusses considerations for fire resistance (DOB-1), structural support (DOB-2), water management (DOB-3), air vapor control (DOB-4), costs (DOB-5), construction time (DOB-6), and coordination with other building elements (DOB-7). Details like flashing, insulation, sealants, and structural supports are described for managing moisture and airflow. Both systems are presented as durable, low maintenance options suitable for buildings expected to last over 100 years.
Berger Paints India Limited (BPIL) is the second largest paint company in India. It was established in 1923 as Hadfield's (India) Limited and acquired by British Paints in 1947. Today it has a presence across India with 7 manufacturing plants, over 82 depots, and a network of over 12,000 dealers. The document discusses Berger Paints' growth history, operations, marketing strategies, and environmental and social objectives. It also summarizes a market research study conducted to analyze Berger Paints' marketing strategies and identify ways to improve sales and market share.
Wall coverings come in many forms including paints, wallpaper, fabrics, wood, and tiles. The type of wall covering chosen depends on the type of wall, such as brick, plaster, or new plaster walls. Common wall covering materials include paints like emulsion, distemper, cement, and aluminum paints; wallpapers that can be surface printed, washable, or embossed; fabric coverings that are stretched or draped; wood paneling in various textures; and ceramic or mosaic tiles. Proper installation and periodic cleaning and maintenance helps wall coverings last.
Types of Cladding Material For your HomeJohn Marian
If you want to improve or renovate your old house then allow Homeclad to carry out the complete home improvement process in an effective manner. Here we give you an overview about different types of cladding materials which are suitable for your home.
PAINTINGS OF EXTERIOR AND INTERIOR SURFACESjagrutib22
PAINTINGS OF EXTERIOR AND INTERIOR SURFACES - principal types of coating, Paints - function, purpose, properties, classification, components of paints, different types of paints, why do we need different types of paints, manufacturing procedure, surface preparation for exterior and interior surfaces, defects in paints, cost and everything about paints.
This document discusses distempers and adhesives. It defines distempers as water-based paints used for masonry walls made by mixing whiting and glue boiled in water. It provides tips for applying distempers, such as ensuring a dry, smooth surface. Adhesives are defined as substances that bind surfaces together and can be used as substitutes for welding. Various types of adhesives are described, including glues derived from animals or plants as well as synthetic resins that are either thermosetting or thermoplastic.
Walls provide enclosure and structure for buildings. Nearly all buildings have walls that separate interior and exterior spaces and control access, daylight, ventilation, and temperature. Walls may support floors and roofs and brace other walls. There are two main types of walls in domestic English construction: masonry walls made of materials like brick, stone, or concrete blocks laid with mortar, and timber framed walls with a wood framework covered by other materials. Masonry walls are constructed using small units like bricks or larger units like blocks laid in mortar in a cellular pattern to provide strength. Cavity walls have an inner and outer leaf separated by a gap to prevent rain from penetrating the building.
The document discusses different types of cladding materials like stone, metal, timber and their purposes, benefits and installation methods. It provides details on stone cladding types, finishes, calculation of materials needed, surface preparation and the multi-step process of installing stone cladding including applying a scratch coat, laying out the stone, grouting and tooling the joints.
This document discusses various types of wall coverings including paint, wallpaper, wood panels, fabric, glass, metal and other materials. It provides details on different kinds of paints such as emulsion, alkyd, multicolor and textured paints. Various types of wallpaper are described like machine printed, hand printed, sponged, flocked and other styles. Methods for cleaning and maintaining painted surfaces and wallpaper are also outlined.
The project covers the following topics:
Porter’s 5 Forces Analysis
B2B and B2C Markets
Major Players and Brands
Segmentation
Products in various price segments
Product features
Distribution Strategies of Players
Promotional Activities
SWOT Analysis of Akzo Nobel
Category Extension
Understanding of Self - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
ProSocial Behaviour - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Covey says most people look for quick fixes. They see a big success and want to know how he did it, believing (and hoping) they can do the same following a quick bullet list.
But real change, the author says, comes not from the outside in, but from the inside out. And the most fundamental way of changing yourself is through a paradigm shift.
That paradigm shift is a new way of looking at the world. The 7 Habits of Highly Effective People presents an approach to effectiveness based on character and principles.
The first three habits indeed deal with yourself because it all starts with you. The first three habits move you from dependence from the world to the independence of making your own world.
Habits 4, 5 and 6 are about people and relationships. The will move you from independence to interdependence. Such, cooperating to achieve more than you could have by yourself.
The last habit, habit number 7, focuses on continuous growth and improvement.
Aggression - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Finishing works (Building Construction)Zairul Zaiky
This document discusses finishing works in building construction. It focuses on plastering as a type of wall finishing. Plastering functions to protect and cover basic work, produce a flat surface, protect from climate effects, provide a base for paint or tiles, increase durability, and provide comfort. Plastering of internal walls involves base and finish coat layers applied with trowels, while external walls involve thicker, rougher base and finish coats. Different types of materials like cement, lime, sand, and water are used for plastering. Floor finishes can also include tiles made from materials like thermoplastic, vinyl, cork, clay, quarry, and terrazzo.
This document appears to be marketing materials for a home siding product called CoolWall. It discusses common exterior home problems like cracking and moisture damage. It then presents CoolWall as a product that can prevent these issues through barriers like siding that protect against water, weather, and pollutants. Test results are cited showing CoolWall remains effective for over 10 years. Frequently asked questions are answered about CoolWall's benefits over competing products and its coating and reapplication process. Charts compare the long-term costs of maintaining CoolWall versus traditional painting.
This document provides flooring material recommendations for different areas of a building. For areas requiring fire resistance, it recommends concrete flooring sealed with polyurethane. For bathrooms, it recommends porcelain floor tiles. For the lounge, it recommends thick carpet. For lobbies and offices, it recommends cork flooring sealed with polyurethane. For kitchens and storage areas, it recommends resilient vinyl plank flooring sealed with polyurethane. The recommendations include product names, sizes, and protective polyurethane coatings tailored to each area's needs.
Exterior Portland Cement Plaster AssembliesBryan Stanley
This document provides an overview of the Technical Services Information Bureau (TSIB). It discusses the history of TSIB, which traces back to 1929. It outlines the services TSIB provides, including trade promotion, education, research, code development, and technical consulting. The document then discusses various exterior plaster wall and ceiling systems, including substrates like masonry, wood framing, and metal stud framing. It covers topics like exterior sheathing, weather-resistant barriers, lath accessories, and plaster finishes.
Types of wall paints are discussed, including emulsion paint, distemper paint, enamel paints, wood finishes, primers, putties, aluminium paint, texture paints, cement paint, and synthetic enamel. Different types of paint are suitable for different surfaces like walls, wood, metal, and floors. Proper preparation of the surface is important before painting, such as cleaning, repairing cracks, and checking for moisture. Multiple thin coats are typically recommended for best results with drying time between coats.
This document provides summaries of two types of exterior wall assemblies: thin-stone veneer and cavity wall construction with brick on concrete masonry units. For each assembly, it discusses considerations for fire resistance (DOB-1), structural support (DOB-2), water management (DOB-3), air vapor control (DOB-4), costs (DOB-5), construction time (DOB-6), and coordination with other building elements (DOB-7). Details like flashing, insulation, sealants, and structural supports are described for managing moisture and airflow. Both systems are presented as durable, low maintenance options suitable for buildings expected to last over 100 years.
Berger Paints India Limited (BPIL) is the second largest paint company in India. It was established in 1923 as Hadfield's (India) Limited and acquired by British Paints in 1947. Today it has a presence across India with 7 manufacturing plants, over 82 depots, and a network of over 12,000 dealers. The document discusses Berger Paints' growth history, operations, marketing strategies, and environmental and social objectives. It also summarizes a market research study conducted to analyze Berger Paints' marketing strategies and identify ways to improve sales and market share.
Wall coverings come in many forms including paints, wallpaper, fabrics, wood, and tiles. The type of wall covering chosen depends on the type of wall, such as brick, plaster, or new plaster walls. Common wall covering materials include paints like emulsion, distemper, cement, and aluminum paints; wallpapers that can be surface printed, washable, or embossed; fabric coverings that are stretched or draped; wood paneling in various textures; and ceramic or mosaic tiles. Proper installation and periodic cleaning and maintenance helps wall coverings last.
Types of Cladding Material For your HomeJohn Marian
If you want to improve or renovate your old house then allow Homeclad to carry out the complete home improvement process in an effective manner. Here we give you an overview about different types of cladding materials which are suitable for your home.
PAINTINGS OF EXTERIOR AND INTERIOR SURFACESjagrutib22
PAINTINGS OF EXTERIOR AND INTERIOR SURFACES - principal types of coating, Paints - function, purpose, properties, classification, components of paints, different types of paints, why do we need different types of paints, manufacturing procedure, surface preparation for exterior and interior surfaces, defects in paints, cost and everything about paints.
This document discusses distempers and adhesives. It defines distempers as water-based paints used for masonry walls made by mixing whiting and glue boiled in water. It provides tips for applying distempers, such as ensuring a dry, smooth surface. Adhesives are defined as substances that bind surfaces together and can be used as substitutes for welding. Various types of adhesives are described, including glues derived from animals or plants as well as synthetic resins that are either thermosetting or thermoplastic.
Walls provide enclosure and structure for buildings. Nearly all buildings have walls that separate interior and exterior spaces and control access, daylight, ventilation, and temperature. Walls may support floors and roofs and brace other walls. There are two main types of walls in domestic English construction: masonry walls made of materials like brick, stone, or concrete blocks laid with mortar, and timber framed walls with a wood framework covered by other materials. Masonry walls are constructed using small units like bricks or larger units like blocks laid in mortar in a cellular pattern to provide strength. Cavity walls have an inner and outer leaf separated by a gap to prevent rain from penetrating the building.
The document discusses different types of cladding materials like stone, metal, timber and their purposes, benefits and installation methods. It provides details on stone cladding types, finishes, calculation of materials needed, surface preparation and the multi-step process of installing stone cladding including applying a scratch coat, laying out the stone, grouting and tooling the joints.
This document discusses various types of wall coverings including paint, wallpaper, wood panels, fabric, glass, metal and other materials. It provides details on different kinds of paints such as emulsion, alkyd, multicolor and textured paints. Various types of wallpaper are described like machine printed, hand printed, sponged, flocked and other styles. Methods for cleaning and maintaining painted surfaces and wallpaper are also outlined.
The project covers the following topics:
Porter’s 5 Forces Analysis
B2B and B2C Markets
Major Players and Brands
Segmentation
Products in various price segments
Product features
Distribution Strategies of Players
Promotional Activities
SWOT Analysis of Akzo Nobel
Category Extension
Understanding of Self - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
ProSocial Behaviour - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Covey says most people look for quick fixes. They see a big success and want to know how he did it, believing (and hoping) they can do the same following a quick bullet list.
But real change, the author says, comes not from the outside in, but from the inside out. And the most fundamental way of changing yourself is through a paradigm shift.
That paradigm shift is a new way of looking at the world. The 7 Habits of Highly Effective People presents an approach to effectiveness based on character and principles.
The first three habits indeed deal with yourself because it all starts with you. The first three habits move you from dependence from the world to the independence of making your own world.
Habits 4, 5 and 6 are about people and relationships. The will move you from independence to interdependence. Such, cooperating to achieve more than you could have by yourself.
The last habit, habit number 7, focuses on continuous growth and improvement.
Aggression - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
2.
Home Painting Overview.
How to Start Painting.
Painting Process.
Internal Wall Painting.
External Wall Painting
Post Painting Care & Common Defects.
Different Rooms.
3. Exterior Home Painting
Interior Home Painting
• Home Painting is more than simple wall protection.
• Your Painting radiates your personality. They add life to your home.
• Home Painting can broadly be classified into (a) Exterior Home Painting & (b) Interior
Home Painting.
4. Pre Painting Work
• The process of Home Painting is divided in 3 parts:
• Pre-painting work : Includes preparation work like
masonry work, crack filling, water proofing etc.
These have to be undertaken to ensure maximum
life for the final paint film.
Surface Preparation
•Surface Preparation : This process of wall painting
involves making the surface fit for paint application.
For example, if you are painting your interior walls
you would need to make them smooth by applying
Plaster of Paris (POP) or Stucco/ Putty.
• Painting: This includes getting the final paint on
the surface.
Painting
5. • Before you start painting, identify the rooms to
be painted.
Identify the rooms.
• Choose the shades/ scheme you want to be used
in each room. Darker colours makes a space seem
smaller while lighter shades brighten a
space, making it appear more expansive.
•Measure your rooms to find out the area you
need to paint. Choose the most appropriate paint
that meets your needs.
Select Paints & Colours.
•Remove door knobs, handles and other
decorative accessories from doors and
windows, so as to prevent damage due to paint
spillage.
• Use a dry mop to thoroughly remove the dust
from the walls. Wash bathroom and kitchen walls
with water and allow them to dry.
Remove dust from walls.
6. • Painting the Interior Walls of your home requires
you to follow the same procedures:
• Pre-painting work : Check surface for dampness or
water seepage before painting. Remove any loose
plaster from the wall. Ensure proper curing time (7
to 21 days depending on extent of plastering). Allow
re-plastered surfaces to dry thoroughly.
•Surface Preparation : Newly plastered surfaces
should be allowed to cure for a period of at least 6
months. Remove loose particles and paint flakes.
Scrape with sandpaper to ensure that the surface is
dry and free from dirt, dust, or grease.
• Painting: It is always recommended that new
surfaces be primed. Avoid application of surface or
joint compound while painting exterior surfaces. Fill
cracks with a 1:3 (by volume) cement and sand
mixture. Always stir the paint or stain thoroughly
before use, as pigment has a tendency to settle at
the bottom of the can. Stir periodically during
application to ensure colour consistency.
7. • Painting the Exterior Walls of your home requires you to
follow the same procedures:
• Pre-painting work : For exterior surfaces it is very important
to undertake repairs of any wall imperfections before
commencing on painting job. The most common problem with
exterior wall painting is cracks in the wall. Avoid applying putty
or filling compound while painting exterior surfaces. All
external drainage pipes must be checked for rusting or leakage.
Any faulty plumbing must be rectified..
•Surface Preparation : Newly plastered surfaces must be
allowed to cure for at least 35 to 45 days before wall painting.
Previously oil painted surfaces should be sanded thoroughly to
remove loose particles and made dull and matt for better
adhesion. Exterior rough surfaces, previously coated with
cement paint, should be wire brushed and washed with water
thoroughly and dried completely. Before wall painting, ensure
that the surface is free from chalking.
• Painting: It is always recommended that new surfaces be
primed. Apply Exterior Wall Primer. Apply two coats of top coat
paint on surface. It is recommended that horizontal surfaces
like the tops of awnings and parapets must be given an
additional coat for greater protection. Start Painting.
8. •Most wall paints (like emulsions and washable distempers)
are washable. This means they can be periodically cleaned
with mild soap water solution. However, stubborn and very
old stains may be more difficult to remove from the film.
•The newly painted surface should not be cleaned in less
than 2 weeks after application of finished coat.
•Special care should be taken for the passages, kitchens and
children's rooms when home painting.
•To minimize permanent or difficult-to-remove stains, clean
walls immediately before the stains dry up.
•Walls should be checked periodically for loose, flaking or
peeling paint. Once signs of moisture are detected, they
should be checked and resolved immediately, so as to
minimize damage to the area.
•It is important to protect your painting job. Proper post
painting care ensures that your painting job lasts for a long
time & your walls stays protected.
9. Oil Paints for Bed Rooms
Acrylic Paints for Bath Rooms
Plastic Emulsions on Kitchen Walls
Gloss Enamel for Living Rooms