5. Nanking Blue
66B-4D
68A-1A
Blue Fury
Is It Possible To Prevent Damage From These Elements?
FIVE OPTIONS WATER WEATHER POLLUTANTS
Paint No No No
Re-Float No No No
Re-Stucco Yes No No
Siding Yes Yes/No Yes
CoolWall Yes Yes Yes
6. Nanking Blue
66B-4D
68A-1A
Blue Fury
Coolwall Energy Savings
On a hot day, the sun can beat down on the walls of
your home, and your home can absorb as much as
90% of the radiant energy (or heat)! Even white walls
can absorb significant solar radiation. All that heat
makes the inside of your home hot and
uncomfortable. Running air conditioning to cool your
home can be extremely expensive.
In fact, a central air conditioning system uses about
3500 watts, or 3.5kWh every hour. In some areas of
the country, cooling even a moderate size house
requires over 1500 hours of air conditioning
operation a year. Now, COOLWALL® - an advanced
exterior coating system - tested by the Department
of Energy to lower surface temperatures* - can make
your home more comfortable while reducing your
use of air conditioning.
7. Cumberland
13A-1A
68A-1A
Blue Fury
TEX•COTE® COOLWALL® Coating
Systems regularly undergo
accelerated weathering tests
comparable to those used on
today's advanced automotive
paints. As a result, TEX•COTE®
COOLWALL® Coating Systems are
proven to be highly resistant to
fading.
FGD
Accelerated weathering with
5000 hours of testing is
equivalent to approximately 10-
12 years of southern exposure
(much longer in northern
climates).
Every 1,000 hours is equivalent to 2-3 years of exposure.
8. Teton Blue
58B-2T
68A-1A
Blue Fury
Q: How does the COOLWALL® System compare to those coatings claiming to be "ceramic"?
The so called "ceramic" coatings actually are ordinary coatings that have had small ceramic spheres added. The premise
sounds good, except that the science does not support the claims that are made. Even though these coatings may be applied
heavier than ordinary paint, there simply is not enough thickness to effect insulation of any measure. These ceramic coatings
have been debunked by the Department of Energy and the Federal Trade Commission and they do not increase reflectivity.
Q: What is the life of the COOLWALL® SYSTEM?
"The COOLWALL® System is designed to last a lifetime. Testing in our state-of-the-art xenon weathering chamber showed the
COOLWALL® System was still performing beautifully after the equivalent of more than 10 years exposure, with no end in
sight!"
Q: How does COOLWALL® reflect heat without changing color?
The ability of COOLWALL® to keep wall surfaces cooler is based on its ability to reflect a much greater percentage of the non-
visible portion of the spectrum leaving the color relatively unaffected. COOLWALL® has tremendous performance to reflect
these elements. The ability of COOLWALL® to keep wall surfaces cooler is based on its ability to reflect a much greater
percentage of the non-visible portion of the spectrum relatively unaffected.
Q: What is the recoat procedure?
1. Recoating should begin with a clean, sound surface.
2. If recoating with the same color, COOLWALL® finish may be applied without a primer.
3. If recoating in a different color, you may require both COOLWALL® primer and finish.
9. Orange Drop
18B-3D
68A-1A
Blue Fury
1
•
Paint S u r e , if you don’t mind placing a costly band-aid on you’re b i g g e s t a s s e t . .
because that’s e x a c t l y what paint does, until the next time damage occurs.
Choosing Paint as “the” option of choice may appear to be the cheapest of all the options (in the
moment) be assured, it’s not. Paint is a GUARANTEE RE-OCCURING COST, period. You can select
a quality contractor whom uses quality material, but that’s about all the control you have - you can’t
control the weather or the ingredients today’s paint is made out of.
• Let’s do the basic math on this one… the average cost of a paint job is 4,000.-9,000. IF you went
with the better contractor you may have extended your next paint project out for a couple more
years- even then dishing hard earned money out for yet ANOTHER temporary band-aid….is, well.. a
VERY expensive band aid.
• Paint SUFFOCATES stucco and wood. In it’s effort to adapt to it’s environment, paint expands in the
heat and contracts in the cold and over time paint will start to peel and crack. When this process
begins it ACCELRATES EXISTING DAMAGE (the one that this was a band-aid for) forcing you to re-
stucco.
10. Cumberland
13A-1A
68A-1A
Blue Fury
MAINTENANCE COST
These figures represent the painting &
maintenance costs for three different
stucco homes, in SoCal over a 45 year
period, which is covered by the
CoolWall Warranty.
National inflation rate is 4% per year.
For Contractors it is 6% due to
higher Workers Compensation and
Liability Insurance coverage.
Paint on Stucco
11. Mortar Gray
13B-1P
68A-1A
Blue Fury
MAINTENANCE COST
Figures represent the painting
& maintenance costs for three
different wood homes, in SoCal
over a 45 year period, which is
covered by the SuperCote
Warranty.
National inflation rate is 4% per
year. For Contractors it is 6%
due to higher Workers
Compensation and Liability
Insurance coverage.
Paint on Wood
Maintenance Costs for Residential Painting
12. Evening Haze
71A-3P
68A-1A
Blue Fury
2 Re-Float Stucco
• Color Coat (Re-Float) is made of sand, concrete, glue and water. Sand
absorbs water, concrete is constantly curing.
• Cracking and Peeling happens as more water is absorbed. Look at your soil
line next to your sprinklers.
• Because a new color coat is applied over the existing stucco a cold joint is
created and will separate at this joint as moisture is introduced and large
areas will fall off all over the house
• Average Warranty is 3 Years
• Average Cost for a Re-Float is $6,000-$12,000
13. Martinique
66C-4D
68A-1A
Blue Fury
3 Re-Stucco
• Different than re-floating, a re-stucco involves completely ripping off all 3
layers of the stucco.
• This process is very messy and your walls are ripped open down to the
studs and left exposed to the outside elements.
• The benefit is that you can put a new vapor barrier on your house to
protect against moisture problems for another 15-20 years.
• Average warranty is 5 years.
• Average cost for a re-stucco is $20,000-$30,000
14. Copper Rust
98-4D
68A-1A
Blue Fury
4
•
•
Siding
Vinyl Siding can be a viable option.
You are locked into the color once applied.
• Cheaper vinyl siding can fade and usually has no insulation behind it.
• Applied improperly it can trap moisture in walls and cause rotting in between
walls.
• Average warranty is limited lifetime.
• Average cost for vinyl siding is $18,000-$35,000
15.
16. 68A-1A
Blue Fury
5
•
•
•
Lock Out All Future Expenditures Forever.
D.O.E. Tested to Save Up To 21% on Cooling Costs.
10-20 Times Thicker than Paint.
• Freeze and Thaw Resistant, Mildew Resistant, Class “A” Fire Rated, Salt Fog
Resistant, Moisture & U.V. Resistant.
• 2 Gallons of Primer for Every 1 Gallon of Coating.
• 62% Solids per Gallon of CoolWall vs. 30% in Paint.
• Patented 10 Step Process - Guaranteed.
• NEVER PAINT AGAIN!!!
• LIFETIME WARRANTY against chipping, flaking & peeling!
17. Nanking Blue
66B-4D
68A-1A
Blue Fury
HEAT REFLECTANT TEST
After image captured in infrared photography proves COOLWALL’s
revolutionary heat reflective qualities with a difference of up to 37° F.
18. Dark Shadow
78C-4D
68A-1A
Blue Fury
LIFETIME EXTERIOR
COST COST COST
MARKET MARKET MARKET
RECOUPED RECOUPED RECOUPED
NATIONAL AVERAGE 82% Kansas City 51% Phoenix 46%
Atlanta 63% Los Angeles 124% Pittsburgh 68%
Boston 43% Miami 71% Portland, Oregon 31%
Buffalo, N.Y. 80% Milwaukee 71% Riverside 116%
Chicago 103% Minneapolis 86% Sacramento 65%
ROI Chart
Cincinnati 63% Nassau-Suffolk, N.Y. 74% Salt Lake City 80%
Cleveland 80% New Orleans 90% San Bernardino 110%
Columbus, Ohio 64% New York Metro 85% San Diego 112%
Dallas 121% Norfolk, Va. 95% San Francisco 85%
Denver 54% Oakland, Ca. 139% San Francisco Metro 112%
Detroit 56% Orange County 129% Santa Barbara 112%
Houston 51% Passaic, N.J. 95% Seattle 68%
Indianapolis 60% Philadelphia 87% St. Louis 81%
19. Sistine Blue
66B-4D
68A-1A
Blue Fury
If It Were Affordable,
Which Product Option
Would You Choose?
20. Scarborough
59C-4D
68A-1A
Blue Fury
1
I NS P E CT I ON
We completely inspect the outside walls
STEPONE
of your home for deterioration and
suspect area.
21. Scarborough
59C-4D
68A-1A
Blue Fury
2
T R E NCH I NG
We trench around your home 3-6 “ down
STEPTWO
so we can apply the primer cote below
grade level this stops the moisture below
the soil line and prevents the wicking
effect and eliminates foundation decay.
22. Scarborough
59C-4D
68A-1A
Blue Fury
3
WATER
S A ND B LA S T
STEPTHREE
The entire house is pressure washed to
remove dirt, stains, loose paint, foreign
substrates, mold, mildew, and algae. Once
cleaned, areas in need of patching are
revealed.
23. Scarborough
59C-4D
68A-1A
Blue Fury
4
R EPAIR &
P A T CH
STEPFOUR
Deteriorated areas are patched with
specially formulated patching and bonding
materials to correct defects and create a
sound and uniform surface area.
24. Scarborough
59C-4D
68A-1A
Blue Fury
5
M A S K I NG
STEPFIVE
All doors, windows, landscaping and surface
not to be coated are carefully covered to
prevent overspray and provide the most
professional-looking job possible.
25. Scarborough
59C-4D
68A-1A
Blue Fury
6P R I M E R COA T
STEPSIX
Our thick TEX∙COTE® primer is applied
that will provide an armor-like protective
surface to your home’s exterior.
26. Scarborough
59C-4D
68A-1A
Blue Fury
7
COA T I NG
I NS P E CT I ON
STEPSEVEN
A careful inspection is performed to insure
proper thickness and uniform appearance
of the primer has been applied.
27. Scarborough
59C-4D
68A-1A
Blue Fury
8
COOLW A LL ™
STEPEIGHT
TEX∙COTE® SUPER∙COTE™ smooth or textured
finish is applied. This SUPER∙COTE™ finish
chemically bonds forming a permanent protective
barrier against the elements, reflects harmful UV
radiation and adds a maintenance free beauty to
your home.
28. Scarborough
59C-4D
68A-1A
Blue Fury
9
T R I M ∙COT E ®
STEPNINE
Once the surface is coated, all trim areas are
covered with specially formulated, highly
protective trim paint.
29. Scarborough
59C-4D
68A-1A
Blue Fury
10
CLE A N- UP
STEPTEN
All masking is removed and the area is
cleaned up of any and all project debris.
