Guide
•Download as PPTX, PDF•
1 like•544 views
1) Carefully remove the tripod legs from the case and place on the floor. 2) Open the legs of the tripod to make it flat and balanced, securing the clips on the sides. 3) Adjust the height of the tripod by unclipping the leg clips and lifting to the desired height, then securing the clips.
Report
Share
Report
Share
Recommended
How to set up a tripod
The document provides steps for how to correctly set up a tripod. It details: 1) Removing the tripod from its bag and placing it on the floor with feet touching. 2) Opening each leg individually and pressing on the middle to ensure stability. 3) Unclipping the leg clips to adjust the height and tightening the tilting pole. 4) Pressing the red button to remove the middle part and securely attaching the camera. 5) Checking the spirit level to ensure the camera is level.
How to set up a tripod
The document provides instructions for setting up a tripod in 6 steps:
1. Remove the tripod from its bag and place it on the floor with its feet touching the ground.
2. Open each leg individually to stand it up without problems and press on the middle to ensure it is stable and flat.
3. Unclip the clips on each leg and adjust the height and middle section so it is straight and eye-level without being wonky or shaky.
How to set up the tripod
To set up a tripod, one unlatches the legs, extends them to the desired length, spreads them outwards and presses the base flat. The latches are then refastened to secure the height. Finally, the top is adjusted so the spirit bubble is centered in the circle, ensuring shots are level and professional for documentary production.
Camera and tripod set up
To set up a camera and tripod:
1. Carry the camera in a bag with a shoulder strap and carry the tripod in its case by the handles to prevent dropping them.
2. Remove the tripod from its case and extend the legs so it balances, then push circles inward to steady it.
3. Loosen clasps to extend the legs to the desired height, then tighten the clasps. Adjust the spirit level by loosening its handle to center the bubble level.
4. Remove the plate from the tripod and attach it to the camera's base to secure the camera to the tripod for use.
How to set up a tripod
To set up a tripod:
1. Check that the base plate is securely attached and the legs are extended fully and tightened.
2. Further extend the legs if needed by unlocking clips and pushing them up until secondary safety flaps lock into place to ensure balance.
3. Loosen the bolt on the pan handle to adjust for maximum comfort when panning and tighten screws to secure.
Video task script
A man is duct taped to a chair in a dark room under surveillance by CCTV cameras. A woman enters and asks the man what he knows. The man responds "Everything" while staring at the woman under tension.
Tripod
Aman Murria documents how to set up a tripod for camera use. The steps include screwing the camera onto the base plate, attaching the base plate to the top of the tripod, and extending the tripod legs by releasing clips and pushing down. The post also discusses interview shots versus vox pop shots and reminds the reader to tighten panning handles, remove the base plate after use, and put away all equipment.
Recommended
How to set up a tripod
The document provides steps for how to correctly set up a tripod. It details: 1) Removing the tripod from its bag and placing it on the floor with feet touching. 2) Opening each leg individually and pressing on the middle to ensure stability. 3) Unclipping the leg clips to adjust the height and tightening the tilting pole. 4) Pressing the red button to remove the middle part and securely attaching the camera. 5) Checking the spirit level to ensure the camera is level.
How to set up a tripod
The document provides instructions for setting up a tripod in 6 steps:
1. Remove the tripod from its bag and place it on the floor with its feet touching the ground.
2. Open each leg individually to stand it up without problems and press on the middle to ensure it is stable and flat.
3. Unclip the clips on each leg and adjust the height and middle section so it is straight and eye-level without being wonky or shaky.
How to set up the tripod
To set up a tripod, one unlatches the legs, extends them to the desired length, spreads them outwards and presses the base flat. The latches are then refastened to secure the height. Finally, the top is adjusted so the spirit bubble is centered in the circle, ensuring shots are level and professional for documentary production.
Camera and tripod set up
To set up a camera and tripod:
1. Carry the camera in a bag with a shoulder strap and carry the tripod in its case by the handles to prevent dropping them.
2. Remove the tripod from its case and extend the legs so it balances, then push circles inward to steady it.
3. Loosen clasps to extend the legs to the desired height, then tighten the clasps. Adjust the spirit level by loosening its handle to center the bubble level.
4. Remove the plate from the tripod and attach it to the camera's base to secure the camera to the tripod for use.
How to set up a tripod
To set up a tripod:
1. Check that the base plate is securely attached and the legs are extended fully and tightened.
2. Further extend the legs if needed by unlocking clips and pushing them up until secondary safety flaps lock into place to ensure balance.
3. Loosen the bolt on the pan handle to adjust for maximum comfort when panning and tighten screws to secure.
Video task script
A man is duct taped to a chair in a dark room under surveillance by CCTV cameras. A woman enters and asks the man what he knows. The man responds "Everything" while staring at the woman under tension.
Tripod
Aman Murria documents how to set up a tripod for camera use. The steps include screwing the camera onto the base plate, attaching the base plate to the top of the tripod, and extending the tripod legs by releasing clips and pushing down. The post also discusses interview shots versus vox pop shots and reminds the reader to tighten panning handles, remove the base plate after use, and put away all equipment.
18 - Twisty T - Flight
This document describes an activity using a "Twisty T" paper flyer to demonstrate how forces allow for flight. The activity instructs students to cut and fold a paper figure into the shape of a "T" and toss it into the air. When tossed, the Twisty T wobbles upward due to torque (twisting), stops, and begins spiraling down slowly due to the opposing forces of gravity and lift. Students observe that gravity pulls down while the twisting torque creates lift by moving air faster over the top wing. The conclusion is that nothing moves without forces, forces always come in pairs with an opposing force, and under the right conditions, the force of lift allows an object to fly.
Safety Talk: Near Misses
How easy we find it to push aside or forget a near miss incident. This is because of our ability to rationalize that nothing serious happened. But if we took the time and closely investigated each near miss, we would find a message telling us there’s much more to it.
Micro elements
In this power point presentation i have shown all the micro elements which is used in the media indusrty for filiming. In doing so i have also used the majority of the micro elements in my own movie opening which is why it was so sucsessful
equipment
To use an old camera:
1. Slide the battery into the back and insert a tape into the side holder, pushing the front to connect the sides.
2. The tape holder will lower itself automatically; close the side completely.
3. Follow all steps to be ready to use the camera.
To use a tripod:
1. Pull out the tripod legs until standing, then unscrew the camera plate and screw it onto the camera.
2. Attach the camera to the tripod plate so it fits securely in place.
To use a microphone:
1. Attach the microphone to the boom pole and connect the wire to the microphone securely.
Setting up the equipment proper
First, the clips on the tripod legs were undone and the legs were extended to reach a suitable height for an interview. Second, the legs were pulled out and lengthened to make the tripod stable and tall enough. Finally, the base plate was inserted into the slot on the tripod so that the camera could safely sit on top and take high quality pictures at the correct level for conducting straight and professional interviews.
Setting up the equipment 123
First, the clips on the tripod legs were undone and the legs were extended to reach a suitable height for an interview. Second, the legs were extended outward and lengthened to make the tripod stable and tall enough. Finally, the base plate was inserted into the slot on the tripod so that the camera could safely sit on top and take high quality pictures at the correct level for conducting straight and professional interviews.
Tricky Shots | Rendezvous
This document outlines various tricky shots that were filmed and how challenges were overcome. It describes 5 shots from a film project including an establishing shot where the camera reflection was avoided by tilting the tripod. A match on action shot of a kiss required practice and attention to editing for continuity. A tracking shot was created by placing the camera on a cushion that was pulled lightly. A high angle close up from above a sofa required holding the camera completely still during filming and editing to avoid shaking. Additional lighting for various shots was provided by the filmmakers standing on either side of the camera and flickering flashlights to boost light in a cinematic style.
Lesson four presentation
This document discusses using variables in a Scratch project to count the number of times a ball bounces. It explains how to create a variable called "Bounces" for the ball sprite and add code to the ball's script to increment the variable by 1 each time the ball reaches the bottom of the screen, simulating a bounce. This allows the variable to track the number of bounces over the course of the project. An extension activity suggests adding another variable to track something about the character sprite as well.
Raisers Edge Ch7
This document provides instructions for determining and recording the appropriate action status in Raiser's Edge software. It explains that the status options are pending if the action has not happened, closed if complete, or closed with follow up required if further action is needed. It also describes how to record the completion date if the action is done or leave it blank if not, and how to select the phone number used if the action was a phone call.
resume 1-28-16
Megan Lee Welborn is a registered nurse with over 15 years of nursing experience, including as a staff nurse, relief charge nurse, and preceptor at Kaiser Permanente facilities in Fontana, Riverside, and Colton, California. She graduated with honors from California State University, San Bernardino with a Bachelor of Science in Nursing and certificates in public health and psychology. Megan has extensive experience providing patient care, mentoring other nurses, and participating in nursing committees and educational seminars focused on topics like leadership, wound care, and ethics. She currently serves as a leader of the nursing healthcare team at the Kaiser Permanente Colton Clinic.
How mums decide what's healthy (summary)
Throughout the year we conduct research as part of our Original Insights series.
These are projects we commission ourselves, to explore interesting questions and showcase social listening research as a tool for making better decisions.
Our starting point for this work was the realisation that food advice has become deafening. It feels like everyday there’s a new diet, new scare or a new miracle cure.
But, we all know it’s more complicated than the headlines make out.
Helping your family eat well and be healthy is a life-long, every day mission, one with many twists and turns.
So we decided to explore: how mums in the UK talk about being healthy, how and who they’re influenced by, and see what this means for brands.
And so our starting point became: how do UK mums decide what’s healthy?
Anem a la biblioteca
La persona anima a subir las escaleras y entrar en el mundo mágico de los libros en la biblioteca.
Country people analysis
The document analyzes the design elements of Country Music People magazine, including colors, layout, and images. For the front cover, white text is used to suggest the magazine is best for the country genre. The contents page uses red and black colors that are simple like the genre. The double page spread uses warm colors to set a friendly tone and convey the southern origins of country music. Images on the cover and contents page feature famous country stars to attract readers. The double page spread layout effectively incorporates the image with minimal text obstruction.
Codes and Conventions of a Double Page Spread
The document discusses the codes and conventions used in television listings, including main images, titles, pull quotes, page numbers, dates and times, columns, drop caps, color schemes, bylines, secondary images, and mise en scene. It explains that the codes and conventions will be followed for a television listing being created about a documentary on physical disabilities at educational institutions, including a large main image, prominent title, relevant pull quote, page numbers, three columns, a drop cap, suitable colors, bylines crediting creators, and secondary images related to interview subjects.
Elo yrittäjämittari 2016 tulospresentaatio
Innostuneella kasvuyrittäjällä on loppuunpalamisen riski, kun työn imu tempaa mukaansa.
Repaying the trust overdraft
This paper outlines some new thinking about how trust works.
- We’ll outline some problems with the current model.
- Introduce some new thinking about how emotions work.
- Share the results of some recent research that applies this model in the real world.
- Offer some practical next steps for understanding, measuring and, most importantly, addressing the trust overdraft.
Data Science in Drug Discovery
Presenter: Marina Sirota, UCSF
Recent advances in genome typing and sequencing technologies have enabled quick generation of a vast amount of molecular data at very low cost. The mining and computational analysis of this type of data can help shape new diagnostic and therapeutic strategies in biomedicine. In this talk, I will discuss how such technological advances in combination with data science and integrative analysis can be applied to drug discovery in the context of drug target identification, computational drug repurposing, and population stratification approaches.
Aspetti legali della stampa 3D: come tutelare una rivoluzione. Stampa 3D: sic...
L’improvvisa accelerazione nel mercato della stampa 3D ha di fatto posto il mondo del diritto davanti ad alcune sfide giuridiche di non semplice soluzione. Il fenomeno del 3D printing sta infatti crescendo a dismisura, con il rischio che la rivoluzione dei makers sia ‘in-controllata’, con impatti negativi e rischi per tutta la filiera produttiva e per gli utenti finali. La stampa 3D ha messo in atto il c.d. processo di democratizzazione della manifatturizzazione, facendo entrare in crisi l’attuale sistema di proprietà intellettuale.
Complesse sono anche le implicazioni che tale tecnologia pone nel campo medico, in particolare in relazione alla qualità del prodotto finale e alla sicurezza del processo produttivo. Stampa 3D che comporta infatti rischi causati da dispositivi medici malfunzionanti o possibili danni alla salute derivanti dal processo di stampa o dall’utilizzo del prodotto stampato.
Oggi una soluzione definitiva non esiste. L’esempio di video, musica e libri dovrebbe aver fatto capire tutti che è inutile chiudere i file e adattare i contratti e le leggi vigenti. Innovare non significa adattare, significa capire la tecnologia e ripensare i modelli tecnologici e contrattuali.
www.reforcoescolarapoio.com.br - Geografia - Concentração de Terras
Geografia - VideoAulas Sobre Concentração de Terras - Faça o Download desse material em nosso site. Acesse www.reforcoescolarapoio.com.br
PSICOMOTRICITAT
This document discusses basic psychomotor skills like moving inside, outside, forward, backward, and making trains and cars with toys. It mentions advancing and stopping toys gradually and at a faster pace.
More Related Content
What's hot
18 - Twisty T - Flight
This document describes an activity using a "Twisty T" paper flyer to demonstrate how forces allow for flight. The activity instructs students to cut and fold a paper figure into the shape of a "T" and toss it into the air. When tossed, the Twisty T wobbles upward due to torque (twisting), stops, and begins spiraling down slowly due to the opposing forces of gravity and lift. Students observe that gravity pulls down while the twisting torque creates lift by moving air faster over the top wing. The conclusion is that nothing moves without forces, forces always come in pairs with an opposing force, and under the right conditions, the force of lift allows an object to fly.
Safety Talk: Near Misses
How easy we find it to push aside or forget a near miss incident. This is because of our ability to rationalize that nothing serious happened. But if we took the time and closely investigated each near miss, we would find a message telling us there’s much more to it.
Micro elements
In this power point presentation i have shown all the micro elements which is used in the media indusrty for filiming. In doing so i have also used the majority of the micro elements in my own movie opening which is why it was so sucsessful
equipment
To use an old camera:
1. Slide the battery into the back and insert a tape into the side holder, pushing the front to connect the sides.
2. The tape holder will lower itself automatically; close the side completely.
3. Follow all steps to be ready to use the camera.
To use a tripod:
1. Pull out the tripod legs until standing, then unscrew the camera plate and screw it onto the camera.
2. Attach the camera to the tripod plate so it fits securely in place.
To use a microphone:
1. Attach the microphone to the boom pole and connect the wire to the microphone securely.
Setting up the equipment proper
First, the clips on the tripod legs were undone and the legs were extended to reach a suitable height for an interview. Second, the legs were pulled out and lengthened to make the tripod stable and tall enough. Finally, the base plate was inserted into the slot on the tripod so that the camera could safely sit on top and take high quality pictures at the correct level for conducting straight and professional interviews.
Setting up the equipment 123
First, the clips on the tripod legs were undone and the legs were extended to reach a suitable height for an interview. Second, the legs were extended outward and lengthened to make the tripod stable and tall enough. Finally, the base plate was inserted into the slot on the tripod so that the camera could safely sit on top and take high quality pictures at the correct level for conducting straight and professional interviews.
Tricky Shots | Rendezvous
This document outlines various tricky shots that were filmed and how challenges were overcome. It describes 5 shots from a film project including an establishing shot where the camera reflection was avoided by tilting the tripod. A match on action shot of a kiss required practice and attention to editing for continuity. A tracking shot was created by placing the camera on a cushion that was pulled lightly. A high angle close up from above a sofa required holding the camera completely still during filming and editing to avoid shaking. Additional lighting for various shots was provided by the filmmakers standing on either side of the camera and flickering flashlights to boost light in a cinematic style.
Lesson four presentation
This document discusses using variables in a Scratch project to count the number of times a ball bounces. It explains how to create a variable called "Bounces" for the ball sprite and add code to the ball's script to increment the variable by 1 each time the ball reaches the bottom of the screen, simulating a bounce. This allows the variable to track the number of bounces over the course of the project. An extension activity suggests adding another variable to track something about the character sprite as well.
Raisers Edge Ch7
This document provides instructions for determining and recording the appropriate action status in Raiser's Edge software. It explains that the status options are pending if the action has not happened, closed if complete, or closed with follow up required if further action is needed. It also describes how to record the completion date if the action is done or leave it blank if not, and how to select the phone number used if the action was a phone call.
What's hot (9)
Viewers also liked
resume 1-28-16
Megan Lee Welborn is a registered nurse with over 15 years of nursing experience, including as a staff nurse, relief charge nurse, and preceptor at Kaiser Permanente facilities in Fontana, Riverside, and Colton, California. She graduated with honors from California State University, San Bernardino with a Bachelor of Science in Nursing and certificates in public health and psychology. Megan has extensive experience providing patient care, mentoring other nurses, and participating in nursing committees and educational seminars focused on topics like leadership, wound care, and ethics. She currently serves as a leader of the nursing healthcare team at the Kaiser Permanente Colton Clinic.
How mums decide what's healthy (summary)
Throughout the year we conduct research as part of our Original Insights series.
These are projects we commission ourselves, to explore interesting questions and showcase social listening research as a tool for making better decisions.
Our starting point for this work was the realisation that food advice has become deafening. It feels like everyday there’s a new diet, new scare or a new miracle cure.
But, we all know it’s more complicated than the headlines make out.
Helping your family eat well and be healthy is a life-long, every day mission, one with many twists and turns.
So we decided to explore: how mums in the UK talk about being healthy, how and who they’re influenced by, and see what this means for brands.
And so our starting point became: how do UK mums decide what’s healthy?
Anem a la biblioteca
La persona anima a subir las escaleras y entrar en el mundo mágico de los libros en la biblioteca.
Country people analysis
The document analyzes the design elements of Country Music People magazine, including colors, layout, and images. For the front cover, white text is used to suggest the magazine is best for the country genre. The contents page uses red and black colors that are simple like the genre. The double page spread uses warm colors to set a friendly tone and convey the southern origins of country music. Images on the cover and contents page feature famous country stars to attract readers. The double page spread layout effectively incorporates the image with minimal text obstruction.
Codes and Conventions of a Double Page Spread
The document discusses the codes and conventions used in television listings, including main images, titles, pull quotes, page numbers, dates and times, columns, drop caps, color schemes, bylines, secondary images, and mise en scene. It explains that the codes and conventions will be followed for a television listing being created about a documentary on physical disabilities at educational institutions, including a large main image, prominent title, relevant pull quote, page numbers, three columns, a drop cap, suitable colors, bylines crediting creators, and secondary images related to interview subjects.
Elo yrittäjämittari 2016 tulospresentaatio
Innostuneella kasvuyrittäjällä on loppuunpalamisen riski, kun työn imu tempaa mukaansa.
Repaying the trust overdraft
This paper outlines some new thinking about how trust works.
- We’ll outline some problems with the current model.
- Introduce some new thinking about how emotions work.
- Share the results of some recent research that applies this model in the real world.
- Offer some practical next steps for understanding, measuring and, most importantly, addressing the trust overdraft.
Data Science in Drug Discovery
Presenter: Marina Sirota, UCSF
Recent advances in genome typing and sequencing technologies have enabled quick generation of a vast amount of molecular data at very low cost. The mining and computational analysis of this type of data can help shape new diagnostic and therapeutic strategies in biomedicine. In this talk, I will discuss how such technological advances in combination with data science and integrative analysis can be applied to drug discovery in the context of drug target identification, computational drug repurposing, and population stratification approaches.
Aspetti legali della stampa 3D: come tutelare una rivoluzione. Stampa 3D: sic...
L’improvvisa accelerazione nel mercato della stampa 3D ha di fatto posto il mondo del diritto davanti ad alcune sfide giuridiche di non semplice soluzione. Il fenomeno del 3D printing sta infatti crescendo a dismisura, con il rischio che la rivoluzione dei makers sia ‘in-controllata’, con impatti negativi e rischi per tutta la filiera produttiva e per gli utenti finali. La stampa 3D ha messo in atto il c.d. processo di democratizzazione della manifatturizzazione, facendo entrare in crisi l’attuale sistema di proprietà intellettuale.
Complesse sono anche le implicazioni che tale tecnologia pone nel campo medico, in particolare in relazione alla qualità del prodotto finale e alla sicurezza del processo produttivo. Stampa 3D che comporta infatti rischi causati da dispositivi medici malfunzionanti o possibili danni alla salute derivanti dal processo di stampa o dall’utilizzo del prodotto stampato.
Oggi una soluzione definitiva non esiste. L’esempio di video, musica e libri dovrebbe aver fatto capire tutti che è inutile chiudere i file e adattare i contratti e le leggi vigenti. Innovare non significa adattare, significa capire la tecnologia e ripensare i modelli tecnologici e contrattuali.
www.reforcoescolarapoio.com.br - Geografia - Concentração de Terras
Geografia - VideoAulas Sobre Concentração de Terras - Faça o Download desse material em nosso site. Acesse www.reforcoescolarapoio.com.br
PSICOMOTRICITAT
This document discusses basic psychomotor skills like moving inside, outside, forward, backward, and making trains and cars with toys. It mentions advancing and stopping toys gradually and at a faster pace.
4 q fy16 earnings webcast deck - final
- Nielsen reported financial results for the 4th quarter and full year 2016, with revenue of $6.3 billion for the full year, up 4.1% in constant currency.
- Adjusted EBITDA for the full year was $1.9 billion, up 5.2% in constant currency.
- The company acquired Gracenote, a provider of music, video and sports metadata, to bolster its digital content measurement capabilities.
- For 2017, Nielsen expects total revenue growth of 5-6% in constant currency and adjusted EBITDA margin to remain flat.
Rohit L. Gawali- Plexiglas Project
The document summarizes Rohit L. Gawali's MS project on testing Plexiglas using a Legos Full Contact Tester. The project aimed to (1) test the tester board electronics without a glass sample, (2) reduce noise to increase image quality, and (3) control signals sent to pixels to display test images. Gawali designed new tester hardware interfacing with a Kintex FPGA board to send controlled signals at different offsets and gains, obtaining pixel value results. Through this project, Gawali learned skills in FPGA and CPLD design, flat panel testing, and coordinating with a team.
Viewers also liked (15)
Aspetti legali della stampa 3D: come tutelare una rivoluzione. Stampa 3D: sic...
Aspetti legali della stampa 3D: come tutelare una rivoluzione. Stampa 3D: sic...
www.reforcoescolarapoio.com.br - Geografia - Concentração de Terras
www.reforcoescolarapoio.com.br - Geografia - Concentração de Terras
Similar to Guide
How to set up a tripod
The document provides instructions for setting up a tripod in 6 steps:
1. Remove the tripod from its bag and place it on the floor with its feet touching the ground.
2. Open each leg individually to stand it up without problems and press on the middle to ensure it is stable and flat.
3. Unclip the clips on each leg and adjust the height and middle section so it is straight and eye-level without being wonky or shaky.
How to set up a Tripod
This document provides instructions for setting up a tripod for video recording in 7 steps. It describes extending the tripod legs to the proper height, attaching the base plate to mount the video recorder, leveling the tripod using a spirit level, and further adjusting the height for different shots. It concludes with safety tips, such as always returning the tripod to its bag and not overtightening parts.
Tripod set up
- Always check that a tripod's base plate is securely attached and legs are clipped in before use to ensure stability. The base plate allows the camera to mount to the tripod.
- A tripod's legs can be extended or shortened by undoing clips at the bottom and top of each leg to adjust the tripod's height as needed. All clips must be securely fastened once the desired height is reached.
- When conducting interviews for news pieces ("VOX POP"), position the camera on the left side of the subject and keep both camera and subject at eye-level to avoid impressions of superiority or inferiority.
Tripod
The document provides instructions for setting up a tripod for camera use, including screwing the camera onto a base plate and securing it to the top of the tripod. It also explains how to adjust the tripod's height by releasing clips and pushing down with your feet. Finally, it defines an interview shot as having the subject off to one side not looking at the camera, while a vox pop shot centers the subject looking directly at the camera.
Snap photo
Taking a photo requires focusing and pressing the shutter button, snapping multiple shots in case some are blurry, and immediately checking the captured photo so adjustments can be made. To hold the camera still, keep elbows together against the chest, left hand under the lens, lean into the camera holding it tight, and keep legs open. It's also important to snap extra shots for quality and avoid errors, then check the pictures and save the best while deleting others to save memory space.
Manual Evacuation Chair Training.pptx
The document provides training instructions for operating an evacuation chair in an emergency when elevators are unusable. It outlines 4 steps: 1) assembling the chair by lowering it from its cabinet and locking it open, 2) placing the rider in the chair and fastening safety straps, 3) going down stairs by engaging auxiliary wheels and brakes to control descent, turning at landings, and 4) folding the chair closed for storage after removing the rider. The purpose is to safely evacuate individuals unable to use stairs.
Camera movement details
This document defines and describes various camera movements used in filmmaking, including fluid movement, head room, nose room, lead room, anticipatory movement, pans, tracking shots, tilts, dolly shots, crane shots, steadicam shots, and reverse zooms. Each type of movement is defined in one to three sentences explaining how it is achieved and its purpose.
Prelim 4 equipment workshop
This document provides instructions for using different types of camera equipment: DSLR cameras, tripods, shoulder mounts, and gimbals. It explains how to turn on and focus a DSLR camera, unlock and level a tripod, loosen the arms of a shoulder mount and stabilize the camera, and attach and balance a camera on a gimbal. It also lists pros and cons of each - DSLR cameras are easy to use but need extra sound equipment, tripods provide stable shots but are large, shoulder mounts keep shots steady but movement ruins videos, and gimbals allow moving shots but have a complex setup.
US Optics TS 12x Instruction Manual | Optics Trade
The document provides setup and use instructions for the TS-12X rifle scope from U.S. Optics. It describes how to adjust the reticle focus, elevation and windage for zeroing the scope, set the parallax, maintain the scope, and details the lifetime warranty. The scope has adjustable objective and ocular lenses, windage and elevation turrets, and a parallax adjustment dial to configure for the user's needs.
How to do a back flip
To perform a back flip safely, follow nine steps: 1) Find a soft open area to practice, 2) Stretch thoroughly beforehand, 3) Commit fully without fear, 4) Stand upright with arms above head and feet shoulder-width apart, 5) Squat and swing arms down and back before exploding upwards, 6) Time the jump to flip backwards at the peak, 7) Tuck knees into chest during the flip, 8) Stretch out legs three-fourths through the flip to land on feet, and 9) Bend legs on landing to soften the impact.
ttpdf
The document provides an owner's manual and exercise guide for the BSB-1700D Total Trainer. It includes important safety information and instructions for assembling, adjusting, and folding the machine. The document then provides an illustrated guide to various exercises that can be performed on the Total Trainer, dividing them into categories of cardiovascular, lower-body, and upper-body exercises. Each exercise illustration includes details on form and muscle groups targeted.
Similar to Guide (11)
US Optics TS 12x Instruction Manual | Optics Trade
US Optics TS 12x Instruction Manual | Optics Trade
More from sehrishjabeenxoxo
Setting up shots
Setting up shots involves three people: Sehrish, Bronte and Humzah. They are working together to prepare shots for something, though the document does not provide details on what specifically they are setting shots up for. The short document introduces these three individuals but does not provide any other context or information about their roles or the task they are undertaking together.
Double Page Spread Print Screen
Sehrish Jabeen created a double page spread for a magazine article about facilities for the physically disabled in educational institutions. She added a grey background, main headline in red text, subheading, company logo, page numbers, and images including the disability sign as the main image. Finally, she added the article text and a quote to complete the magazine spread. While initially challenging, Sehrish gained experience and completed the spread efficiently.
Images used for DPS
This document contains 4 sections by Sehrish Jabeen describing images used for a double page spread documentary. The first section describes cropping an image in Photoshop to focus on the subject. The second and third sections discuss brightening dark images of a witness and headteacher in Photoshop. The final section explains including a disability sign to represent the documentary's focus on physical disability.
Filming schedule
The document outlines three production schedules for filming a documentary titled "Do educational institutions really meet the needs of the physically disabled?". The schedules include details of filming locations, resources needed, roles and times. Background footage will be captured of the college entrance and disabled signs. Archival footage will show facilities for disabilities in the learning center. A voxpop will interview 12 people about their experiences.
Outline of documentary
The documentary outlines the introduction, middle, and end sections. The introduction will provide facts about disability laws and pose the question "Do educational institutions truly meet the needs of physically disabled?". In the middle, the documentary will introduce the subject and show their experience getting to and around college, including transportation methods and any challenges. It will also feature voxpops and interviews with the subject and an expert. The end will interview a disabled employee about access and show the subject having an issue, concluding with an expert interview preview. Resources needed include a video camera, tripod, phone, communication apps, and presentation software.
Outline of documentary
The documentary outlines the introduction, middle, and end sections. The introduction will provide facts about disability laws and show footage relating to the main question of whether educational institutions meet the needs of the physically disabled. In the middle, the documentary will introduce the subject and show them navigating college, asking occasional questions. It will also include vox pops from students and interviews with the subject and an expert. The end will interview an employee with a disability, show the subject having a problem, and preview the full expert interview.
More from sehrishjabeenxoxo (6)
Recently uploaded
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcHow to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdanePollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Guide
- 1. Guide : How to use a tripod Sehrish, Bronte & Humzah
- 2. Step 1 Get the tripod out of its case carefully, making sure you don’t drop it. Get the legs bit out first and place It onto the floor.
- 3. Step 2 Open the legs of the tripod, making it flat and balanced and then clipping the sides so that it is secure.
- 4. Step 3 You can adjust the height of the tripod by un doing the clips of the legs and lifting it to the height you would like. Then, clip the sides so that it is secure.
- 5. Step 4 Check to see of the ‘spirit level’ of the tripod is level, if not you can adjust it using the screw underneath. The spirit level needs to be level so that the footage is balanced.
- 6. Step 5 Take of the base by releasing the clip on the side and holding on to the red button. Then add the camera onto the base with the screw.
- 7. Step 6 Slide the camera back on to the tripod, make sure it is balanced.
- 8. Step 7 Check if the camera is at eye match and ready for filming.