Groschopp 05300 specsheet
•
0 likes•31 views
The document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1350 rpm and 5.1 lb-in of torque. It lists various performance metrics like breakdown torque, pullup torque, start/stall conditions, and efficiency curves across a range of torques and speeds. The motor has a continuous duty cycle and 59.1% efficiency. It was prepared by Groschopp.com and is available from Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 05299 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1320rpm without a gearbox. Key specifications include a rating of 1315rpm and 6.3lb-in of torque drawing 0.75amps and producing 97watts and 0.1306HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05295 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a voltage of 230V, 50Hz, and speed of 2760 rpm. Key specifications include a rating of 2755 rpm and 5.0 lb-in of torque drawing 0.81 amps of current and producing 162 watts of output power. Charts show torque and efficiency curves across various speeds when cold and hot.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a continuous duty cycle and 51% efficiency. Under cold start/stall conditions, the motor produces 1.17 amps of current and 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from a maximum of 90% at low torque to 51% at peak torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Recommended
Groschopp 05299 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1320rpm without a gearbox. Key specifications include a rating of 1315rpm and 6.3lb-in of torque drawing 0.75amps and producing 97watts and 0.1306HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05295 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a voltage of 230V, 50Hz, and speed of 2760 rpm. Key specifications include a rating of 2755 rpm and 5.0 lb-in of torque drawing 0.81 amps of current and producing 162 watts of output power. Charts show torque and efficiency curves across various speeds when cold and hot.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a continuous duty cycle and 51% efficiency. Under cold start/stall conditions, the motor produces 1.17 amps of current and 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from a maximum of 90% at low torque to 51% at peak torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps and produces 14.6 lb-in of torque.
Groschopp 66373 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, breakdown, pullup and efficiency characteristics along with duty cycle, current and torque requirements for starting and stalling. Performance curves are shown for speed, efficiency and torque both when cold and hot.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05271 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 3230 RPM, 4.9 lb-in of torque, 0.74 amps of current, and 186 watts of output power without a gearbox. Key specifications include an efficiency of 77%, a starting current of 3.3 amps and starting torque of 11.2 lb-in, and a chart showing torque and speed performance across different RPM levels. The motor is to be sold and serviced by Electromate.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05299 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1320rpm without a gearbox. Key specifications include a rating of 1315rpm and 6.3lb-in of torque drawing 0.75amps and producing 97watts and 0.1306HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a breakdown speed of 671 RPM and pullup speed of 34 RPM. It has continuous duty and an efficiency of 51% for the gearbox, motor, and system. Startup requires 1.17 amps and generates 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from 90% at 0 RPM to 10% at 1350 RPM.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. Startup requires 0.40 amps of current producing 2.55 lb-in of torque. A graph shows efficiency decreases with speed above 750 rpm.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Start/stall conditions are listed as 1.34 amps current and 2.28 lb-in torque. A graph shows efficiency and speed versus torque from 0 to 1800 rpm. Notes indicate a 10uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 66379 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, torque and current ratings at different speeds, as well as efficiency levels for the motor, gearbox and overall system under various conditions. It also lists start/stall current and torque values and includes a chart showing torque, speed and efficiency measurements. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and turns an output shaft at 12.6rpm through a 120:1 gearbox reduction.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps of current and produces 14.6 lb-in of torque.
Groschopp 05267 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V and speed of 1510 rpm. The motor has a rated speed of 1521.8 rpm, torque of 5.9 lb-in, current of 0.67 amps, output of 107 watts, and output of 0.1432 HP. Start/stall conditions are a current of 1.77 amps and torque of 10.38 lb-in. The motor has an efficiency of 58.4% and can operate continuously with no gearbox.
Groschopp 05267 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V and speed of 1510 rpm. The motor has a rated speed of 1521.8 rpm, torque of 5.9 lb-in, current of 0.67 amps, output of 107 watts, and output of 0.1432 HP. Start/stall conditions are a current of 1.77 amps and torque of 10.38 lb-in. The motor has an efficiency of 58.4% and can operate continuously with no gearbox.
Groschopp 05295 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a voltage of 230V, 50Hz, and speed of 2760 rpm. Key specifications include a rating of 2755 rpm and 5.0 lb-in of torque drawing 0.81 amps of current and producing 162 watts of output power. Charts show torque and efficiency curves across various speeds when cold and hot.
More Related Content
What's hot
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps and produces 14.6 lb-in of torque.
Groschopp 66373 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, breakdown, pullup and efficiency characteristics along with duty cycle, current and torque requirements for starting and stalling. Performance curves are shown for speed, efficiency and torque both when cold and hot.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05271 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 3230 RPM, 4.9 lb-in of torque, 0.74 amps of current, and 186 watts of output power without a gearbox. Key specifications include an efficiency of 77%, a starting current of 3.3 amps and starting torque of 11.2 lb-in, and a chart showing torque and speed performance across different RPM levels. The motor is to be sold and serviced by Electromate.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
What's hot (8)
Similar to Groschopp 05300 specsheet
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05299 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1320rpm without a gearbox. Key specifications include a rating of 1315rpm and 6.3lb-in of torque drawing 0.75amps and producing 97watts and 0.1306HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a breakdown speed of 671 RPM and pullup speed of 34 RPM. It has continuous duty and an efficiency of 51% for the gearbox, motor, and system. Startup requires 1.17 amps and generates 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from 90% at 0 RPM to 10% at 1350 RPM.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. Startup requires 0.40 amps of current producing 2.55 lb-in of torque. A graph shows efficiency decreases with speed above 750 rpm.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Start/stall conditions are listed as 1.34 amps current and 2.28 lb-in torque. A graph shows efficiency and speed versus torque from 0 to 1800 rpm. Notes indicate a 10uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 66379 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, torque and current ratings at different speeds, as well as efficiency levels for the motor, gearbox and overall system under various conditions. It also lists start/stall current and torque values and includes a chart showing torque, speed and efficiency measurements. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and turns an output shaft at 12.6rpm through a 120:1 gearbox reduction.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps of current and produces 14.6 lb-in of torque.
Groschopp 05267 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V and speed of 1510 rpm. The motor has a rated speed of 1521.8 rpm, torque of 5.9 lb-in, current of 0.67 amps, output of 107 watts, and output of 0.1432 HP. Start/stall conditions are a current of 1.77 amps and torque of 10.38 lb-in. The motor has an efficiency of 58.4% and can operate continuously with no gearbox.
Groschopp 05267 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V and speed of 1510 rpm. The motor has a rated speed of 1521.8 rpm, torque of 5.9 lb-in, current of 0.67 amps, output of 107 watts, and output of 0.1432 HP. Start/stall conditions are a current of 1.77 amps and torque of 10.38 lb-in. The motor has an efficiency of 58.4% and can operate continuously with no gearbox.
Groschopp 05295 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a voltage of 230V, 50Hz, and speed of 2760 rpm. Key specifications include a rating of 2755 rpm and 5.0 lb-in of torque drawing 0.81 amps of current and producing 162 watts of output power. Charts show torque and efficiency curves across various speeds when cold and hot.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency ratings, start/stall conditions, and a graph of torque vs speed and efficiency when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency curves, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 66044 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a PL 7300 90:1 ratio gearbox. The motor has a rating of 0.1109 HP at 16.9 rpm with an output torque of 413.5 lb-in, drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Similar to Groschopp 05300 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsWhy You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Recently uploaded (20)
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Groschopp 05300 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 8060 TENV 230 v 50 Hz 1350 rpm 4 Poles None Product ID: 5300 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1350.0 rpm 5.1lb-in 0.58 amps 82 watts 0.1093 HP Breakdown (Cold): Speed: Torque: 727.81 rpm 14.11 lb-in Pullup (Cold): Speed: Torque: 58.3 rpm 13.19lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 59.1 % 59.1 % Start/Stall Conditions: Current: Torque: 1.73 amps 13.20 lb-in Torque (lb-in) Speed RPM Efficiency 150 0 0.0 1.5 300 3.0 450 4.5 600 6.0 750 7.5 900 9.0 1050 10.5 1200 12.0 1350 13.5 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com