This is used to track the exact location of a vehicle using GPS tracking systems and give information about the position to concerned person through GSM via SMS.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
This is used to track the exact location of a vehicle using GPS tracking systems and give information about the position to concerned person through GSM via SMS.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
1-The main intention of this project is to find the accident spot at any place and intimating it to ambulance through the GPS and GSM networks
2-Global system for mobiles (GSM) technology is used to establish cellular connections.
3-GPS is used to trace the position of the vehicle.
You can download detailed ppt from here
https://adf.ly/XPA3E
Here we are making a project which just traces our vehicle location, in terms of its precise latitude and longitude and then send it to a mobile number (as per our requirement). This project consists of three main devices which are :- (i) Arduino UNO, (ii) GPS module (Neo-6M), & (iii) GSM- 900A.These all three devices will be going to be installed in the vehicle to which we want to trace. Initially what happened that we make a program in arduino (in C language) regarding interfacing the GSM device and GPS device. And we also set a mobile number in the program as per our need, on which we get the info regarding its (vehicle’s) location. First of all we make a call to the mobile number which has been installed in the GSM module and then after some specific delay (as per mentioned in the program) we get a sms regarding the exact latitude and longitude of the vehicle. It is done in a way that GPS device is continuously receiving the location of the vehicle from the satellite and then transferring to the arduino board, from where we send it to the required mobile no. And hence in this way we can easily get info regarding the exact location of the vehicle. Once the message has been sent to the predefined mobile no. the GSM gets deactivated and the GPS gets activated. Thus we can easily trace our vehicle. Vehicle Tracking System (VTS) is the technology used to determine the location of a vehicle using different methods like GPS and other radio navigation systems operating through satellites and ground based stations. This system is an important tool for tracking each vehicle at a given period of time and now it is becoming increasingly popular for people having expensive cars and hence as theft prevention and retrieval device.
1-The main intention of this project is to find the accident spot at any place and intimating it to ambulance through the GPS and GSM networks
2-Global system for mobiles (GSM) technology is used to establish cellular connections.
3-GPS is used to trace the position of the vehicle.
You can download detailed ppt from here
https://adf.ly/XPA3E
Here we are making a project which just traces our vehicle location, in terms of its precise latitude and longitude and then send it to a mobile number (as per our requirement). This project consists of three main devices which are :- (i) Arduino UNO, (ii) GPS module (Neo-6M), & (iii) GSM- 900A.These all three devices will be going to be installed in the vehicle to which we want to trace. Initially what happened that we make a program in arduino (in C language) regarding interfacing the GSM device and GPS device. And we also set a mobile number in the program as per our need, on which we get the info regarding its (vehicle’s) location. First of all we make a call to the mobile number which has been installed in the GSM module and then after some specific delay (as per mentioned in the program) we get a sms regarding the exact latitude and longitude of the vehicle. It is done in a way that GPS device is continuously receiving the location of the vehicle from the satellite and then transferring to the arduino board, from where we send it to the required mobile no. And hence in this way we can easily get info regarding the exact location of the vehicle. Once the message has been sent to the predefined mobile no. the GSM gets deactivated and the GPS gets activated. Thus we can easily trace our vehicle. Vehicle Tracking System (VTS) is the technology used to determine the location of a vehicle using different methods like GPS and other radio navigation systems operating through satellites and ground based stations. This system is an important tool for tracking each vehicle at a given period of time and now it is becoming increasingly popular for people having expensive cars and hence as theft prevention and retrieval device.
A vehicle tracking system is very useful for tracking the movement of a vehicle from any location at any time. An efficient vehicle tracking system is designed and implemented for tracking the movement of any equipped vehicle from any location at any time. The proposed system made good use of popular technology that combines a smartphone with an Arduino UNO. This easy to make and inexpensive compared to others. The designed in vehicle device works using Global Positioning System GPS and Global System for Mobile Communication GSM technology that is one of the most common ways for vehicle tracking. The device is embedded inside a vehicle those positions is to be determined and tracked in real time. An Arduino UNO is used to control the GPS receiver and GSM module. The vehicle tracking system uses the GPS module to get geographic coordinates at regular time interval. The GSM module is used to transmit and update the vehicle location to a database. This paper gives minute by minute update about vehicle location by sending SMS through GSM modem. This SMS contain latitude and longitude of the location of vehicle. Arduino UNO gets the coordinates from GPS modem and then it sends this information to user in text SMS. GSM modem is used to send this information via SMS sent to the owner of the vehicle. Location is displayed on LCD. And then Google map displays location and name of the place on cell phone. Thus, user able to continuously monitor a moving vehicle on demand using smartphone and determine the estimated distance and time for the vehicle to arrive at a given destination. Ni Ni San Hlaing | Ma Naing | San San Naing ""GPS and GSM Based Vehicle Tracking System"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23718.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23718/gps-and-gsm-based-vehicle-tracking-system/ni-ni-san-hlaing
Vehicle Monitoring and Tracking System based on ARM7 and Android ApplicationIJMTST Journal
A vehicle monitoring and tracking system gives the better solutions in the security issues of various applications. Based on ARM7 and android application is designed and implemented for monitoring the vehicle based on location. Security to this system can be provided using finger print module for authentication purpose. The vehicle will be started only when the authorized person enters into the vehicle and provides finger print to biometric device so that by using this authentication process we can avoid misusing of vehicle and thefts. The GPS is a one of location reorganization technology that is used in several applications. GPS is also used for vehicle tracking and monitoring. The tracking system of our proposed system informs the location and route travelled by vehicle and also the GSM technology is used for sending alert message to mobile. In our proposed system we are making use of LPG Gas leakage sensor MQ2 and temperature sensor LM35 to provide a safety for the travelers.
This article explains about development of Internet of Things (IoT) based decision support for vehicle drivers using GPS and GSM modules. This project is helpful to avoid the road accidents by maintaining the proper speed limit at different locations such as school zones, hospital regions and so on. Initially an admin database is created with a web server. The data base contains six parts such as S.No, longitude1, latitude1, longitude2, latitude2, speed limit. The web server has been implemented with a PHP page which provides a connection to the databases allowing web clients to send queries to data base. A PC application is distributed among local guides; they can provide speed limits of the allocated regions. A GPS receiver is used to provide the vehicle’s location and a GSM module is configured as GPRS to provide internet connection through mobile data. An Organic Light Emitting Diode (OLED) is used to display the speed limit of the vehicle’s location. Arduino UNO (At mega 328P) board is used to interface all the components. The instructions to the vehicle drivers are given by using OLED display when the location is tracked by GPRS, and also an alarm sounds at extreme conditions.
This system builds a new intelligent vehicle checking system based on ARM7 embedded processing technology, processing technology of digital videos, vehicle identification technology, GSM wireless mobile telecommunication technology, GPS positioning technique, implements the checking to vehicles which break the rules or owe the charge. Here we are using car as mobile vehicle checker.
1. GPS BASED FLEET MANAGEMENT SYSTEM
ABSTRACT
In this Project it is proposed to design an embedded system which is used for tracking and
positioning of any vehicle by using Global Positioning System (GPS) and Global system for
mobile communication (GSM).
In this project AT89S52 microcontroller is used for interfacing to various hardware
peripherals. The current design is an embedded application, which will continuously monitor
a moving Vehicle and report the status of the Vehicle on demand. For doing so an AT89S52
microcontroller is interfaced serially to a GSM Modem and GPS Receiver. A GSM modem is
used to send the position (Latitude and Longitude) of the vehicle from a remote place. The
GPS modem will continuously give the data i.e. the latitude and longitude indicating the
position of the vehicle. The GPS modem gives many parameters as the output, but only the
NMEA data coming out is read and displayed on to the LCD. The same data is sent to the
mobile at the other end from where the position of the vehicle is demanded. An EEPROM is
used to store the mobile number.
The hardware interfaces to microcontroller are LCD display, GSM modem and GPS
Receiver. The design uses RS-232 protocol for serial communication between the modems
and the microcontroller. A serial driver IC is used for converting TTL voltage levels to RS-
232 voltage levels. When the request by user is sent to the number at the modem, the system
automatically sends a return reply to that mobile indicating the position of the vehicle in
terms of latitude and longitude.
