This resume summarizes Ghanshyam Chodvadiya's work experience and qualifications. He has over 10 years of experience working in operations roles at large chemical plants. Currently, he works as a Shift Field Engineer at Reliance Industries, overseeing various units including sulfur recovery. He has also worked as a Process Engineer and Panel Officer at Deepak Nitrite and Diamines & Chemicals, monitoring critical units and parameters. Chodvadiya holds a Bachelor's degree in Chemical Engineering and has extensive experience in plant operations, safety, and emergency response.
Started to create milestones, we Atmos Power Pvt Ltd marked our presence in the year 2011 and operates in the manufacturing/servicing of Bio-CNG and H2 Mixing Plant, Pressure Vessal & Heat Exchangers, Bio-Gas To CNG Purification Unit, PSA Nitrogen Generation Plants, Hydrogen Generation Plant By Water Electrolysis since 1 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Bio-CNG and H2 Mixing Plant, Pressure Vessal & Heat Exchangers, Bio-Gas To CNG Purification Unit, PSA Nitrogen Generation Plants, Hydrogen Generation Plant By Water Electrolysis, Air & Gas Dryers that has made us to deepen our roots in the market. We Atmos Power Pvt Ltd breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
This work presents the experimental results of gasification of char derived from
pyrolysis of Pongamia deoiled cake at maximum oil condition. Experiments are
conducted in fluidized bed reactor using air as the gasifying agent. The gasification
temperature and equivalence ratio (ER) were varied as per the designed experiment
using central composite design to study the influence on the composition of the
product gas. The lower heating value (LHV), Gas yield (GY), carbon conversion
efficiency (CCE) and cold gas efficiency (CGE) were calculated from the data of the
composition of the gas. The experiments were carried out in the temperature range of
600-800 °C, equivalence ratio of 0.26-0.36. Regression equations were proposed as a
function of temperature and ER for H2, CO, CH4 and CO2 in the range of
experimental conditions. The results showed that at a temperature of 800 °C and ER
of 0.35, maximum cold gas efficiency of 52.04% was achieved. The optimum input
parameters were identified for maximum gasification efficiency. The product gas with
highest LHV, 5 MJ/Nm3 was obtained at 600 °C temperature, 0.26 ER. The product
gas obtained through gasification of this kind of char can be used as fuel for syngas
engines, for power generation and process heat applications.
Started to create milestones, we Atmos Power Pvt Ltd marked our presence in the year 2011 and operates in the manufacturing/servicing of Bio-CNG and H2 Mixing Plant, Pressure Vessal & Heat Exchangers, Bio-Gas To CNG Purification Unit, PSA Nitrogen Generation Plants, Hydrogen Generation Plant By Water Electrolysis since 1 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Bio-CNG and H2 Mixing Plant, Pressure Vessal & Heat Exchangers, Bio-Gas To CNG Purification Unit, PSA Nitrogen Generation Plants, Hydrogen Generation Plant By Water Electrolysis, Air & Gas Dryers that has made us to deepen our roots in the market. We Atmos Power Pvt Ltd breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
This work presents the experimental results of gasification of char derived from
pyrolysis of Pongamia deoiled cake at maximum oil condition. Experiments are
conducted in fluidized bed reactor using air as the gasifying agent. The gasification
temperature and equivalence ratio (ER) were varied as per the designed experiment
using central composite design to study the influence on the composition of the
product gas. The lower heating value (LHV), Gas yield (GY), carbon conversion
efficiency (CCE) and cold gas efficiency (CGE) were calculated from the data of the
composition of the gas. The experiments were carried out in the temperature range of
600-800 °C, equivalence ratio of 0.26-0.36. Regression equations were proposed as a
function of temperature and ER for H2, CO, CH4 and CO2 in the range of
experimental conditions. The results showed that at a temperature of 800 °C and ER
of 0.35, maximum cold gas efficiency of 52.04% was achieved. The optimum input
parameters were identified for maximum gasification efficiency. The product gas with
highest LHV, 5 MJ/Nm3 was obtained at 600 °C temperature, 0.26 ER. The product
gas obtained through gasification of this kind of char can be used as fuel for syngas
engines, for power generation and process heat applications.
Indpro Engineering Systems Pvt. Ltd. is an organization offering Project Engineering, Consultancy and manufacturing, covering a wide spectrum of industries.
Conceptualization to bridge a gap in this segment of the Engineering Industry in India had us adopt a position of trying to bring around a Single Point solution for various industrial processes. Our foundation is consulting expertise; we have provided the best of our technical and professional services to our customers, with primary focus area being Pneumatic conveying systems, Air pollution control systems and grain handling system.
The leading aim behind all of INDPRO's projects and work is "Optimizing Systems Integration". Our philosophy is always to move towards a path that gives the most optimal results in a given scenario. INDPRO with its professionalism and various partners across the industry strives to give the client hassle-free project implementation and stay on after completion to look for ways and means to take the system forward to its most optimized level.
We endeavor to provide our clients with complete solutions for Project Engineering. Our product range includes equipment to be used for Pneumatic Conveying Systems, Material Handling Conveyors, Vibratory Equipment, Dust collectors, Bin vent filters, bag dump stations, Packaging Systems and Grain Cleaning System.
Tyre Recycle Machine by GLOBALTECH ENERGY RESOURCES ( MALAYSIA)kentchih
welcome to GLOBALTECH ENERGY RESOURCES. we are specialize in : tyre recycle machine, tyre pyrolysis system and dealing in all kinds of recycle products such as TDF(tyre derived fuel) , carbon balck , steel wires and etc..
Canola biodiesel an experimental investigation for production of biodiesel a...eSAT Journals
Abstract The experimental investigation was made to estimate the performance of methyl esters of Canola waste cooking oil and their blends in a direct injection diesel engine. The Canola waste cooking oil methyl ester (CWCOME) was prepared through transesterification process by using methanol and KOH as a catalyst. The Canola biodiesel blends were ready in proportion of 10%, 20%, 30% and 100% of biodiesel with diesel. The effects of pure biodiesel and their blends on engine performance, and exhaust emission were studied under various loading conditions. The experimental results concluded that up to 20% of methyl esters did not affect the performance parameter like fuel consumption rate and brake thermal efficiency. On the other hand above CB20 (20% Canola biodiesel with 80% diesel) a decrease in performance and combustion parameter were clearly observed form the study. Keywords: Canola waste cooking oil, Canola methyl ester, Transesterification, Internal combustion engine, Engine performance.
Biodiesel is an elective fuel like regular or 'fossil' diesel. Biodiesel can be delivered from straight vegetable oil, creature oil/fats, fat and waste cooking oil. The procedure used to change over these oils to Biodiesel is called transesterification. This procedure is depicted in more detail beneath. The biggest conceivable wellspring of appropriate oil originates from oil yields, for example, rapeseed, palm or soybean. In the UK rapeseed speaks to the best potential for biodiesel creation. Most biodiesel created at present is delivered from squander vegetable oil sourced from eateries, chip shops, modern nourishment makers, for example, Birdseye and so forth. Despite the fact that oil directly from the horticultural business speaks to the best potential source it isn't being delivered economically essentially in light of the fact that the crude oil is excessively costly. After the expense of changing over it to biodiesel has been included it is basically too costly to even think about competing with fossil diesel. Squander vegetable oil can regularly be sourced for nothing or sourced effectively treated at a little cost.
The transesterification procedure is a reversible response and did by blending the reactants – unsaturated fats, liquor and impetus. A solid base or a solid corrosive can be utilized as an impetus. At the mechanical scale, for the most part sodium or potassium methanolate is utilized. The finished results of the transesterification procedure are crude biodiesel and crude glycerol. In a further procedure these crude items experience a cleaning step. If there should be an occurrence of utilizing methanol as liquor FAME (unsaturated fat methyl ester) biodiesel is delivered. The cleansed glycerol can be utilized in the nourishment and corrective ventures, just as in the oleochemical business. The glycerol can likewise be utilized as a substrate for anaerobic absorption.
Optimization of biodiesel production from sunflower oil usingAmanda Susanne
Macroestructura textual referente a la tesis siguiente: http://saia.psm.edu.ve/moodle/pluginfile.php/75822/mod_resource/content/1/OPTIMIZATION%20OF%20BIODIESEL%20PRODUCTION.pdf para la materia de Inglés Técnico.
Indpro Engineering Systems Pvt. Ltd. is an organization offering Project Engineering, Consultancy and manufacturing, covering a wide spectrum of industries.
Conceptualization to bridge a gap in this segment of the Engineering Industry in India had us adopt a position of trying to bring around a Single Point solution for various industrial processes. Our foundation is consulting expertise; we have provided the best of our technical and professional services to our customers, with primary focus area being Pneumatic conveying systems, Air pollution control systems and grain handling system.
The leading aim behind all of INDPRO's projects and work is "Optimizing Systems Integration". Our philosophy is always to move towards a path that gives the most optimal results in a given scenario. INDPRO with its professionalism and various partners across the industry strives to give the client hassle-free project implementation and stay on after completion to look for ways and means to take the system forward to its most optimized level.
We endeavor to provide our clients with complete solutions for Project Engineering. Our product range includes equipment to be used for Pneumatic Conveying Systems, Material Handling Conveyors, Vibratory Equipment, Dust collectors, Bin vent filters, bag dump stations, Packaging Systems and Grain Cleaning System.
Tyre Recycle Machine by GLOBALTECH ENERGY RESOURCES ( MALAYSIA)kentchih
welcome to GLOBALTECH ENERGY RESOURCES. we are specialize in : tyre recycle machine, tyre pyrolysis system and dealing in all kinds of recycle products such as TDF(tyre derived fuel) , carbon balck , steel wires and etc..
Canola biodiesel an experimental investigation for production of biodiesel a...eSAT Journals
Abstract The experimental investigation was made to estimate the performance of methyl esters of Canola waste cooking oil and their blends in a direct injection diesel engine. The Canola waste cooking oil methyl ester (CWCOME) was prepared through transesterification process by using methanol and KOH as a catalyst. The Canola biodiesel blends were ready in proportion of 10%, 20%, 30% and 100% of biodiesel with diesel. The effects of pure biodiesel and their blends on engine performance, and exhaust emission were studied under various loading conditions. The experimental results concluded that up to 20% of methyl esters did not affect the performance parameter like fuel consumption rate and brake thermal efficiency. On the other hand above CB20 (20% Canola biodiesel with 80% diesel) a decrease in performance and combustion parameter were clearly observed form the study. Keywords: Canola waste cooking oil, Canola methyl ester, Transesterification, Internal combustion engine, Engine performance.
Biodiesel is an elective fuel like regular or 'fossil' diesel. Biodiesel can be delivered from straight vegetable oil, creature oil/fats, fat and waste cooking oil. The procedure used to change over these oils to Biodiesel is called transesterification. This procedure is depicted in more detail beneath. The biggest conceivable wellspring of appropriate oil originates from oil yields, for example, rapeseed, palm or soybean. In the UK rapeseed speaks to the best potential for biodiesel creation. Most biodiesel created at present is delivered from squander vegetable oil sourced from eateries, chip shops, modern nourishment makers, for example, Birdseye and so forth. Despite the fact that oil directly from the horticultural business speaks to the best potential source it isn't being delivered economically essentially in light of the fact that the crude oil is excessively costly. After the expense of changing over it to biodiesel has been included it is basically too costly to even think about competing with fossil diesel. Squander vegetable oil can regularly be sourced for nothing or sourced effectively treated at a little cost.
The transesterification procedure is a reversible response and did by blending the reactants – unsaturated fats, liquor and impetus. A solid base or a solid corrosive can be utilized as an impetus. At the mechanical scale, for the most part sodium or potassium methanolate is utilized. The finished results of the transesterification procedure are crude biodiesel and crude glycerol. In a further procedure these crude items experience a cleaning step. If there should be an occurrence of utilizing methanol as liquor FAME (unsaturated fat methyl ester) biodiesel is delivered. The cleansed glycerol can be utilized in the nourishment and corrective ventures, just as in the oleochemical business. The glycerol can likewise be utilized as a substrate for anaerobic absorption.
Optimization of biodiesel production from sunflower oil usingAmanda Susanne
Macroestructura textual referente a la tesis siguiente: http://saia.psm.edu.ve/moodle/pluginfile.php/75822/mod_resource/content/1/OPTIMIZATION%20OF%20BIODIESEL%20PRODUCTION.pdf para la materia de Inglés Técnico.
1. RESUME
GHANSHYAM R. CHODVADIYA,
Sector-23, 10/H,
Reliance greens township,
Motikhavdi,
Jamnagar-361142.
Mob:+918128987168/9979308415
Mail: grc_chem@yahoo.co.in
CAREER OBJECTIVE
Join an organization, which enables me to apply my skill to achieve organizational
objective
EDUCATIONAL DETAILS
• SSC (Distinction with 78.11%)
March, 1999
Shri swaminarayan Vidhyalaya, Rajkot (GSEB)
• HSC (Distinction with 72.66%)
April, 2001.
Nutan fellowship Vidhyalaya,Ashram road Ahmedabad (GSEB)
• B.E Chemical (First Class with 64.55%)
June, 2005
GOVERNMENT ENGINEERING COLEGE, Gandhinagar,
Gujarat University
PERSONAL DETAILS
Phone 8128987168/9979308415
Email grc_chem@yahoo.co.in
2. Date Of Birth 06/06/1983
Marital Status Married
LANGUAGES Read, Write and Speak Fluently English, Hindi &
Gujarati
Passport no M0276871
CAREER SUMMARY
1) Organization : Reliance Industries Limited, Jamnagar.
(Refinery Division)
Designation : Shift field enginner.
Experience : From March-2011 to till date.
The Reliance group is the largest private sector organization in India. The Reliance is the
world’s largest grass root refinery.
I am working in Sulphur recovery unit, amine regeneration unit and waste water
stripping unit as a Shift Field Engineer and independently taking charge as a Panel
operator in ARU/WWSU. And Independently taking charge in ARU,SRU as shift field
engineer.
.
Sulphur Recovery unit + Amine Regenerator unit + Sour gas absorber + Sour water
stripping Unit + Acid Gas Flare as shift field Engineer with 4.5 years of experience
including start up, shutdown activity and steady state operations.
• Sulphur recovery / cold bed adsorption (Black & Veatch Pritchard, USA)
Three trains having capacity of 675 TPD with a Clause air blower, a reaction furnace
having 1300 0
C temperature, integrated steam generators, Clause reactor, two CBA
WORK EXPERIENCE
UNIT KNOWLEDGE
3. reactors, five sulphur seal legs, an incinerator having 120 meter stack and a sulphur pit
with two eductors.
Participated in Catalyst replacement jobs of Claus and CBA Reactors during Shutdowns.
• Amine regenerator/treater (UOP)
Four trains having capacity of 604 m3
/ hr with rich amine flash drum, rich-lean amine
heat exchanger, stripper, two reboilers, reflux receiver and fin fan condensers /
coolers
• Sour gas treater / sweetener/absorber (UOP)
Two trains having capacity of 17292 kg/hr with one sour fuel gas cooler and two
knockout drums
• Sour water stripping unit (UOP)
Four trains having capacity of 220 m3
/hr with one degassing drum, three stripped-sour
water heat exchangers, stripper, one reboiler and recirculating water fin fan coolers
• Amipur (Eco-Tech)
For removal of HSS
• Acid gas flare
Total two 150 meter flare stacks having capacity of 147206 Kg/hr with velocity seal
having a knockout drum and liquid seal drum.
• Sulphur granulation (Procor, Canada)
Two trains having capacity of 1013 TPD with a granulator, a scrubber, fines
separator, six truck loading hoppers having 225 tones capacity.
• Maintain process parameter, sample schedule, loop checking, Logic checking and
handling upstream /downstream disturbance emergency.
Preparation of equipments which handover to maintenance like blind list, HOTO(hand
over takeover), mark up P & ID, Work clearance document ets.
• Strict follow up of the safety and environmental rules.
• Strict control of unsafe conditions and unsafe acts.
• Hazard identification and risk assessment before the job
• Prepared Risk assessment for various activity routine and non-routine jobs.
• Job planning and execution of preparation.
• Monitoring and operation of equipments for safe and efficient operations.
• Co-ordination of activities with mechanical, instrumentation and electrical
department with various plant related communication.
• Knowledge of local panel operation like BMS (burner management system) for
(blower, furnace, and incinerator start up and shut down.
• Prepare & Issue work permits (Hot Work, Line Breaking, Confined Space Entry,
Work to Start etc) for maintenance and erection work.
• Develop and review standard operating procedure, Operating manuals, Risks
assessment sheets and do job cycle check of each procedure.
RESPONSIBILITIES
4. • Strictly compliance to all PSM(Process safety management) element, and Working as plant
ERCP((emergency response and control planning)co-ordination looking all ERCP activities
like Prepared mock drill report, dry drill report.
• Handling of emergencies like fire, leakage, etc.
• Training attended for first-aid:health, safety, environment and fire: personal protective
equipment, safe chemical handling, work permit system, major emergency plan, fire
extinguishing, breathing apparatus
• Mock drills carried out for fire, toxic gas release and air-raid.
• Worked for mega expansion project for maximizing plant capacity.
2) Organization : Deepak Nitrite Limited, Baroda.
(Nitro Aromatics Division)
Duration : February 2009 to February-2011.
Designation : Process Engineer working as a Panel Officer.
• Company Profile : Deepak, a leading multiproduct,
petrochemical Company.
Products : Nitration of toluene to produce isomers of nitro toluene as paranitrotoluene,
Orthonitrotoluene, metanitrotoluene ,Nitration of Ethylehaxanol to produce
Ethylehexylenitrate.
Technology : MARIO BIAZZI (SWITZERLAND) and BEFS (FRANCE)
DCS : FOXBORO ( LATEST VERSION 8.2.2)
CRITICAL EQUIPMENT/OPERATION HANDLED ……
• Liquid ring/rotary Piston vacuum pumps And steam ejectors.
• FOXBORO IA SERIES DCS .
• Various types of Vacuum distillation Packed(Random And Regular) columns.
• Handle series of CSTR reactor, High vacuum distillation, nitration reaction.
Skills/knowledge/training
RESPONSIBILITIES
5. • Monitoring and Control of Critical Process Parameters through DCS to keep Plant
under normal running condition.
• Monitor Sampling schedule and take necessary actions for Quality control as well as to
meet environment emission norms
• To maintain safe, reliable and cost effective operation, optimization of unit operations
and plant capabilities.
• Co-ordination with various maintenance departments to trouble shoot plant problems
and take back the unit to normal condition
3) Organization : Diamines & Chemicals Limited, Vadodara.
Duration : May 2006, to January 2009.
Designation : Production officer work as a Panel Officer
Control System : Micro verse DCS Continues plant
CRITICAL EQUIPMENT/OPERATION HANDLED …….
Multicomponent Atmoshpheric & Vacuum distillation with Packed column.
4) Organization : DCM Shriram Akalies Chem. Ltd., Bharuch.
Duration : August, 2005 to April, 2006
Designation : Apprentice GET
Company Profile : DCM Shriram Akalies is continuous caustic chlorine plant.
6. • Monitoring and Control of Critical Process Parameters through DCS to keep Plant
under normal running condition.
• Monitor Sampling schedule and take necessary actions for Quality control as well as to
meet environment emission norms
• To maintain safe, reliable and cost effective operation, optimization of unit operations
and plant capabilities.
• Co-ordination with various maintenance departments to trouble shoot plant problems
and take back the unit to normal condition
3) Organization : Diamines & Chemicals Limited, Vadodara.
Duration : May 2006, to January 2009.
Designation : Production officer work as a Panel Officer
Control System : Micro verse DCS Continues plant
CRITICAL EQUIPMENT/OPERATION HANDLED …….
Multicomponent Atmoshpheric & Vacuum distillation with Packed column.
4) Organization : DCM Shriram Akalies Chem. Ltd., Bharuch.
Duration : August, 2005 to April, 2006
Designation : Apprentice GET
Company Profile : DCM Shriram Akalies is continuous caustic chlorine plant.
