The Genie 120 is a supreme membrane separator designed for low flow gas sampling applications. It can withstand high pressures up to 2,000 psig and has a 1" cross sectional membrane area for removing small amounts of liquid from gas samples on a continuous basis. The Genie 120 is ideal for protecting gas chromatography and other gas analyzers with low flow requirements, and is safe and easy to install and maintain.

1. Genie 120
Supreme Membrane Separator
The Supreme 100 Series remove 100% of
entrained liquid and particulate in gas
samples, which allow only gas sample to flow to
analysers.
Withstands High Pressure
The Model 120 is ideal for low flow applications and can withstand high
KEYBENEFITS
pressure in the housing. Additionally the 120 is safe and easy to install
allows easy maintenance access
• Spot, composite, or continuous gas
sampling in any process industry
including natural gas, petrochemical,
and oil refining
and maintain, especially in heated, densely populated cabinets.
Liquid Analysis & Protection
This high pressure model has a 1” cross sectional membrane area, the
same as the original Genie Model 101, and it is ideal for the removal
of relatively small amounts of liquid present on a continuous basis.
The Genie 120 is also perfect for protecting gas chromatographs, mass
spectrometers, O2 analysers, moisture analysers, and other analysers
with relatively small flow requirements.
Please note that special fittings may be ordered, such as a Universal
Assembly
“
The original brand known for
sample conditioning and
analyser protection
“
• Helps preserve sample integrity
• Quick and easy to install and maintain
• Quick and easy membrane inspection
• Superior analyser protection
• All connection ports on the housing

2. TECHNICALSPECIFICATION
FLOW RATES
• Maximum recommended membrane flow rate:
PRESSURE RATINGS
1 L/min for Type 6/BTU membrane
• Maximum pressure rating: 2,000 psig
• Maximum recommended supply pressure:
4,000 cc/min for Hi-Flow membrane
Lowest possible pressure consistent with application
INTERNAL VOLUME
• Total with Liquid Block: 2.4 cc
• Upstream of membrane: 1.1cc
• Downstream of membrane: 1.1cc
• Maximum Liquid Block valve auto-reset pressure:
36 psig
MAXIMUM TEMPERATURE
• 185 ºF (85 °C) for Type 6/BTU membrane
• 302 ºF (150 ºC) for Hi-Flow Backed membrane
WETTED MATERIALS
• Machined parts: 316 stainless steel / NACE compliant
• All other metal parts: stainless steel / NACE compliant
• Sealing material: Fluoroelastomer standard
• Membrane: Inert
DIMENSIONS
• Inlet, Outlet, & Bypass: 1/8” female NPT
PARTBUILDER
MODEL NUMBERING & ADDITIONAL PART NUMBERS
•
•
•
•
•
Sealing material
0 = fluoroelastomer
1 = perfluoroelastomer (others available upon request)
Membrane type
6 = Type 6/BTU
7 = Hi-Flow Backed
Liquid Block™
Blank = No Liquid Block™ LB = Liquid Block™
Universal Assembly option
Blank = No Universal Assembly
Bypass Rotameter* (only if option U is selected)
U = Universal Assembly
0 = Without Rotameter
1 = 10-100 cc/min*
2 = 100-1000 cc/min*
*Dwyer Rotameter with Integral Valve
•
•
Mounting bracket
Part # 120-509-SS (sold separately)
O-ring replacement
Part # 120-500 (sold separately)
How to build the model number:
How to build the replacement membrane kit:
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HT
T: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com
W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996
ISO 9001