This document contains a career summary for Basavalingappa. It outlines his objective to pursue a challenging career in software and lists his technical skills which include experience in manual and automation testing, knowledge of SDLC and test management tools like QC and TD. His educational qualifications include a diploma in ECE and SSC. Current employment details are provided for HCL COMNET LTD where he has worked since 2013 as an Associate Engineer, undertaking responsibilities like network planning, maintenance, and troubleshooting. Academic projects undertaken include developing a shadow alarm system to prevent theft.
A dynamic, result oriented and ambitious student pursuing B.Tech in Mechanical Engineering final year from University Institute of Engineering and Technology (UIET), Chatrapati Shahu Ji Maharaj University (CSJM), Kanpur, UP, India.
Currently working in Saudi Arabia.
4.5 Years Work Experience in Infrastructure [Roads & Utilities(Pipelines and Water Reservoirs), Bridges and High rise Building Structure].
A dynamic, result oriented and ambitious student pursuing B.Tech in Mechanical Engineering final year from University Institute of Engineering and Technology (UIET), Chatrapati Shahu Ji Maharaj University (CSJM), Kanpur, UP, India.
Currently working in Saudi Arabia.
4.5 Years Work Experience in Infrastructure [Roads & Utilities(Pipelines and Water Reservoirs), Bridges and High rise Building Structure].
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
Obstacle Avoiding Robot
Robotics is a branch of science that deals with Mechanical, Electrical and Software fields. Robots are the machines that are used in our day-to-day to life to reduce men power and work accurately without any distortions. Robots can be classified into two different sections basing upon their skills as Automated and Manual. Obstacle detector is a Automated robot which itself recognizes the obstacle in its path and moves in free direction. Robot detects the obstacle by using two IR Sensors placed in front.
The IR sensors are placed on left and right side of the robot through which continuous Infrared radiation is emitted for detection of obstacles in the path. These IR Sensors are connected to a controlling element AT89c51 µc. When a obstacle is placed in the path of robot IR beam is reflected to the sensor from the obstacle. On detecting obstacle in the path sensor sends 0 volts to µc. This 0 voltage is detected by Microcontroller which avoids the obstacle by taking left or right turn. Similarly if the sensor sends +5v to Microcontroller, the Microcontroller assumes it as clear path and makes the robot to move in straight.
Two motors namely right motor and left motor are connected to Motor driver IC (L293D). L293D is interface with Microcontroller. Microcontroller sends logic 0 & logic 1 as per the programming to driver IC which makes motors to rotate in clockwise and anticlockwise direction. Wheels attached to the motors rotate accordingly with the motor shaft causing in the moment of the robot by wheels. In front portion of the robot a free wheel is attached to move the robot easily in any direction as per the requirement.
A 12Volts DC battery is attached to the circuit. As the microcontroller and sensors requires only 5v, set of resistors and capacitors are used to supply 5v DC to them. Power Management System is not maintained in the circuit as the battery can be removed after the usage of robot. So it does not cause any loss in the power of battery.
This type of robots has multiple applications in various fields. They can be used to know the strength of the opposite army in defense system. They can be used as floor and wall cleaners. They are used in automated GPS vehicles to calculate the moment of the vehicle overhead. These robots are easy to construct and cheaper in cost with long durability.
Talented and experienced young professional, with job experience as ELV Project Engineer as well as Quality Control Officer, possessing experience in large MNC in UAE with proven ability to develop and maintain technology-based solutions, fluent in English, having advanced computer skills, with in-depth technical and installation knowledge of electronic devices, willing to relocate and work in a global team of professionals .
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
Obstacle Avoiding Robot
Robotics is a branch of science that deals with Mechanical, Electrical and Software fields. Robots are the machines that are used in our day-to-day to life to reduce men power and work accurately without any distortions. Robots can be classified into two different sections basing upon their skills as Automated and Manual. Obstacle detector is a Automated robot which itself recognizes the obstacle in its path and moves in free direction. Robot detects the obstacle by using two IR Sensors placed in front.
The IR sensors are placed on left and right side of the robot through which continuous Infrared radiation is emitted for detection of obstacles in the path. These IR Sensors are connected to a controlling element AT89c51 µc. When a obstacle is placed in the path of robot IR beam is reflected to the sensor from the obstacle. On detecting obstacle in the path sensor sends 0 volts to µc. This 0 voltage is detected by Microcontroller which avoids the obstacle by taking left or right turn. Similarly if the sensor sends +5v to Microcontroller, the Microcontroller assumes it as clear path and makes the robot to move in straight.
Two motors namely right motor and left motor are connected to Motor driver IC (L293D). L293D is interface with Microcontroller. Microcontroller sends logic 0 & logic 1 as per the programming to driver IC which makes motors to rotate in clockwise and anticlockwise direction. Wheels attached to the motors rotate accordingly with the motor shaft causing in the moment of the robot by wheels. In front portion of the robot a free wheel is attached to move the robot easily in any direction as per the requirement.
A 12Volts DC battery is attached to the circuit. As the microcontroller and sensors requires only 5v, set of resistors and capacitors are used to supply 5v DC to them. Power Management System is not maintained in the circuit as the battery can be removed after the usage of robot. So it does not cause any loss in the power of battery.
This type of robots has multiple applications in various fields. They can be used to know the strength of the opposite army in defense system. They can be used as floor and wall cleaners. They are used in automated GPS vehicles to calculate the moment of the vehicle overhead. These robots are easy to construct and cheaper in cost with long durability.
Talented and experienced young professional, with job experience as ELV Project Engineer as well as Quality Control Officer, possessing experience in large MNC in UAE with proven ability to develop and maintain technology-based solutions, fluent in English, having advanced computer skills, with in-depth technical and installation knowledge of electronic devices, willing to relocate and work in a global team of professionals .
Tijdens de 10 Meet Up van de Lezers van Stavast sprak Martien Schreurs, verbonden aan de Universiteit voor Humanistiek in Utrecht, over 'De Toverberg' van Thomas Mann. De aanleiding voor dit leesavontuur is de installatie WOLK van theatermaker Lucas De Man voor het theaterfestival Den Bosch.
Slide ini mengandungi tindakan tindakan yang perlu dilakukan kepada penjawat awam jika tidak hadir dalam menjalankan tugas selama 7 hari berturut turut.
1. Basavalingappa.
Mobile Number :+919591495358 Mail ID:basavalinga006@gmail.com
Career Objective
To pursue a challenging career that would allow me to apply my interpersonal and technical skills
to attain the software echelon.
Functional Summary
Strong knowledge in both Manual Testing and in Automation Testing
Sound knowledge in SDLC and STLC
Good knowledge in End to End Process of Test Management Tools Like QC and TD
Good understand of Review Process
Good understand the Test Plan Document
Flexible to work in different shifts
Adequate knowledge in preparing Test Cases and Test Scripts.
Good communication, collaboration & team building skills.
Flexible enough to adapt new environments
Educational Summary
GRADUATION
July 2013 Diploma (ECE)
NETTUR TECHNICAL TRAINING FOUNDATION (NTTF)
• Percentage: 71%
SCHOOL EDUCATION
April 2010 S.S.L.C – Karnataka State Board.
• S.S.R.H.S S.S.MUTH TUMKUR
• Percentage: 68%
Technical skills
Programming Languages : Basics of C, C++
Operating Systems : Windows NT, XP, 2000.Unix
Assembly :Microprocessor (8085) & Micro controller (8051).
Technical skills in networking:
Router Configuration, switch configuration,
Installing the networking devices such as modem, router, and switch.
ISDN technology.
Trouble shooting in networking.
Leased line technology, VSAT technology.
Trouble shooting in networking.
2. Employment details:
Current Employer:
Company Name : HCL COMNET LTD.
Duration : Since 9th
October -2013
Designation : Associate Engineer.
Responsibility Undertaken:
Plan, Prepare and Implement the network as per user requirements.
Monitor and Maintain network stability in HUB.
Computers Hardware and software troubleshooting inside HUB.
Provide technical and remote end support for clients all over India.
Track complaints and assign calls to field engineers.
Deploying hardware to clients if needed.
Manage assert list of AMC for clients.
Co-ordinate with various venders to get immediate solutions.
Projects undertaken in HCL:
ERNET ( EDUCATION AND RESERCH NETWORK)
As a hub Engineer my responsibilities in this project.
Providing the internet service throughout INDIA. through the satellite
communication(INSAT3C).customer end there is one VSAT antenna this will be
connoted to the skyedge modem in customer site,. Through that they used to
receive the signal For educational departments and schools & collages’ used to
monitor the customer site networks through remotely. if any problems occurs
from customer end is used to suggest them, or else if any problems within HUB I
used to rectify, and I used to support engineers who goes to to the customers
side whenever there is problem which customer not aware about that.
ERNET : (Education and research network):in this project I am working since march-
2013.as a associative customer support executive engineer.
3. Academic Project
Project Title : Shadow Alarm
Duration : 3 Months
Description: This Mini Project was carried out in 4th
semester in the
academic year 2011-12.The main objective of this project is to
foreclose the thief activities.. For valuable resources Mainly used this
in banks and shop keepers.
Hobbies
• Playing cricket.
• Listening song, Reading news paper, Browsing information.
Personal Details:
Present;
Govindashetty pally,7th
cross Electronic city,phase 2nd
Hosur road,Bangalore-560100.
Permanent:
At: karabhosaga,
Tq: Afzlpur
Di: Gulbarga
Po: koganoor-585213
.
I here by declare that all statement made in this application are True, Complete and Correct to
the best of my Knowledge and belief.
Signature Date 23-09-2015