CURRICULAM VITAE
Name: RITESH KUMAR PANDEY
Contact Address: 81E/22, Beniganj, Allahabad, 211016 (U.P)
Email: riteshpandey08411@gmail.com
Contact no: +919795197505
CAREER OBJECTIVE
To be a part of an organization, where I can utilize my general & technical skills and to contribute to the
growth of the organization and grow with the organization. I am looking for a challenging Assignment,
which would give a further impetus to my career goals.
PROFFESIONAL QUALIFICATION
 Completed B.Tech (Electrical & Electronic Engineering) from GBTU in year 2012.
ACADEMIC QUALIFICATION
 High school from U. P. board with 48% in the year 2003.
 Intermediate from U.P. board with 58% in the year 2005.
EXPERIENCE
1. Six months of working experience as Automation Trainer in Anax Project &
Development Pvt. Ltd.
Job Responsibility:
 Giving training to PLC & SCADA.
 Working in major jobs & responsibility included on PLC Programming & wiring.
 Troubleshooting/ Commissioning of AC DRIVE (VFDS).
 Knowledge of Power circuit diagram (PCD) of DOL Stator AND STAR DELTA Stator.
 Knowledge of MCB, MCCB, Contactor, Relay & Type OF Sensor.
2. Over Two Years of working experience as Maintenance engineer in Hind elevators
Pvt. Ltd.
Job Responsibilities:-
 Worked in Jhajjar Power Plant Haryana like elevators installation & commission and
maintenance.
 Worked in Rosa Power Supply Shahjahanpur like elevators installation & commission
and maintenance.
 Installation & commissioning of vvvf drives and LT panels.
 Installation & commissioning of traction motors.
 Knowledge of all type of elevators like (hydraulic lift, hospital lift & passenger lift ect.)
3. Currently working in G I Group Staffing Company as Project engineer since March
2015 till now.
Job Responsibilities:-
 Collecting daily modem installation feedback from CDC.
 Updating regular Modem installation report to SDO (sub division).
 Managing field engineer’s work & resolving their field issues.
 Encouraging site engineers to achieve the desired target-modem installation.
 Giving training to DEO (data entry operator) & site engineers.
 Hand experience on site configuration tool & MMT (Material management tool).
 Responsible for DCU establishment at several towns including their hardware & software
set up.
 Ensuring is data transfer to taking place from DCU to CDC.
 Working for Prepaid Meter Installation project in PuVVNL.
SUMMER TRAINING
 Four weeks Training from AREVA T& D NAINI, Allahabad (2nd to 31st July2010).
 Four weeks Training from AREVA T& D NAINI, Allahabad (13thJune to 13th July
2011.)
ACADEMIC PROJECTS
“Performance and Response of separately excited D.C. Motor using MATLAB/
SIMULINK and FUZZY LOGIC”
Duration : 3 months
Team size : 3 Persons
Synopsis : This project is mainly based on MATLAB/SIMULIN and FUZZY
LOGIC.
It improves tracking performance of separately excited D.C. motor and compared with
conventional (PI) control strategy.
COMPUTER SKILL
-Knowledge of Microsoft office-Excel, word note & Power point.
-Internet surfing
-Knowledge of computer hardware
AREA OF INTEREST
• Transformer
• M/Cs
EXTRA CURRICULAR ACTIVITIES
• Worked as Core Committee Member (Technical Expert) of Techno-kriti 2k12at
H.M.F.A.M.I.E.T Alld. (18 to 20 March 2012).
• Worked as Volunteer in National Symposium on Nano-Technology at
H.M.F.A.M.I.E.T. Alld. (19 & 20.Feb.2011).
• Worked as Core Committee Member (Technical Expert) of Techno-kriti 2k12at
H.M.F.A.M.I.E.T Alld. (18 to 20 March 2012).
PERSONAL DETAILS
Date of birth : 05.01.1987
Father’s name : Mr. Sharda Prasad Pandey
Mother’s name : Smt. Urmila Pandey
Permanent address : 81E/22, Beniganj allahabad
Sex : Male
Marital status : married
Languages known : Hindi & English
Hobbies : Football & listening music.
DECLARATION
I hereby declare that the above furnished information is correct to the best of my knowledge
And belief.
Date:
Place: (Ritesh Kumar Pandey)

ritesh cv

  • 1.
    CURRICULAM VITAE Name: RITESHKUMAR PANDEY Contact Address: 81E/22, Beniganj, Allahabad, 211016 (U.P) Email: riteshpandey08411@gmail.com Contact no: +919795197505 CAREER OBJECTIVE To be a part of an organization, where I can utilize my general & technical skills and to contribute to the growth of the organization and grow with the organization. I am looking for a challenging Assignment, which would give a further impetus to my career goals. PROFFESIONAL QUALIFICATION  Completed B.Tech (Electrical & Electronic Engineering) from GBTU in year 2012. ACADEMIC QUALIFICATION  High school from U. P. board with 48% in the year 2003.  Intermediate from U.P. board with 58% in the year 2005. EXPERIENCE 1. Six months of working experience as Automation Trainer in Anax Project & Development Pvt. Ltd. Job Responsibility:  Giving training to PLC & SCADA.  Working in major jobs & responsibility included on PLC Programming & wiring.  Troubleshooting/ Commissioning of AC DRIVE (VFDS).  Knowledge of Power circuit diagram (PCD) of DOL Stator AND STAR DELTA Stator.  Knowledge of MCB, MCCB, Contactor, Relay & Type OF Sensor.
  • 2.
    2. Over TwoYears of working experience as Maintenance engineer in Hind elevators Pvt. Ltd. Job Responsibilities:-  Worked in Jhajjar Power Plant Haryana like elevators installation & commission and maintenance.  Worked in Rosa Power Supply Shahjahanpur like elevators installation & commission and maintenance.  Installation & commissioning of vvvf drives and LT panels.  Installation & commissioning of traction motors.  Knowledge of all type of elevators like (hydraulic lift, hospital lift & passenger lift ect.) 3. Currently working in G I Group Staffing Company as Project engineer since March 2015 till now. Job Responsibilities:-  Collecting daily modem installation feedback from CDC.  Updating regular Modem installation report to SDO (sub division).  Managing field engineer’s work & resolving their field issues.  Encouraging site engineers to achieve the desired target-modem installation.  Giving training to DEO (data entry operator) & site engineers.  Hand experience on site configuration tool & MMT (Material management tool).  Responsible for DCU establishment at several towns including their hardware & software set up.  Ensuring is data transfer to taking place from DCU to CDC.  Working for Prepaid Meter Installation project in PuVVNL. SUMMER TRAINING  Four weeks Training from AREVA T& D NAINI, Allahabad (2nd to 31st July2010).  Four weeks Training from AREVA T& D NAINI, Allahabad (13thJune to 13th July 2011.)
  • 3.
    ACADEMIC PROJECTS “Performance andResponse of separately excited D.C. Motor using MATLAB/ SIMULINK and FUZZY LOGIC” Duration : 3 months Team size : 3 Persons Synopsis : This project is mainly based on MATLAB/SIMULIN and FUZZY LOGIC. It improves tracking performance of separately excited D.C. motor and compared with conventional (PI) control strategy. COMPUTER SKILL -Knowledge of Microsoft office-Excel, word note & Power point. -Internet surfing -Knowledge of computer hardware AREA OF INTEREST • Transformer • M/Cs EXTRA CURRICULAR ACTIVITIES • Worked as Core Committee Member (Technical Expert) of Techno-kriti 2k12at H.M.F.A.M.I.E.T Alld. (18 to 20 March 2012). • Worked as Volunteer in National Symposium on Nano-Technology at H.M.F.A.M.I.E.T. Alld. (19 & 20.Feb.2011). • Worked as Core Committee Member (Technical Expert) of Techno-kriti 2k12at H.M.F.A.M.I.E.T Alld. (18 to 20 March 2012).
  • 4.
    PERSONAL DETAILS Date ofbirth : 05.01.1987 Father’s name : Mr. Sharda Prasad Pandey Mother’s name : Smt. Urmila Pandey Permanent address : 81E/22, Beniganj allahabad Sex : Male Marital status : married Languages known : Hindi & English Hobbies : Football & listening music. DECLARATION I hereby declare that the above furnished information is correct to the best of my knowledge And belief. Date: Place: (Ritesh Kumar Pandey)