This document provides instructions for assembling a cable gland. It includes:
1) An overview of the cable gland components and their assembly order.
2) Detailed steps for preparing the cable and gland, including stripping lengths, spreading the armour, and tightening nuts.
3) Notes on accessories that may be required like shrouds or locknuts.
4) Specifications for the cable gland such as temperature range, certification standards, and cable acceptance sizes.
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
The document provides information on various cable accessories for low voltage cables up to 1 kV, medium voltage cables up to 42 kV, and high voltage cables up to 170 kV. It lists the page numbers for sections on different cable accessories, including joints, terminations, connectors, fittings, insulators, insulation, surge arrestors, switching equipment, and power measurement and control devices. It also provides brief descriptions and product literature references for some highlighted cable accessories.
This document provides information on switch disconnectors and enclosures from Thorne & Derrick UK's i-switch product range. It describes moulded plastic enclosures and deep drawn steel enclosures for housing switchgear rated from 16A to 80A. Safety features like padlocking and an interlock to prevent unauthorized opening are highlighted. Technical specifications and application details are provided for isolator interiors, accessories, and auxiliary contacts. Dimensions and installation guidelines are also included.
This document provides information on various cable joints, terminations, glands, cleats, feeder pillars, fuse links, and arc flash products. It lists the contact information for Thorne and Derrick UK, including their phone and fax numbers. It then provides details on various heat shrink tubing products, including their specifications, approvals, chemical resistance, shrink ratios, operating temperatures, and availability.
Hazardous Area Isolators
ATEX Isolators - Zone 22 Category 3D Isolators
Craig & Derricott ATEX certified isolators and switch disconnectors for hazardous area Group II, Zone 22, Cat 3D Non-Conductive Dusts - typical installation areas include grain mills, textiles, cargo handling, powder coating plant, chemicals, woodworking and waste processing.
From July 2006 the onus was placed upon companies to ensure that all electrical equipment within their site organisation is suitable for the environment in which it is being used - this was aimed particularly at hazardous areas where there may be a possibility of a combustible atmosphere being present, even for short periods i.e. less than 10 hours/year.
People normally think of such atmospheres as being gases, mists or vapours - however there are various industries where a conductive or non-conductive dust mixed with air in the right proportion can become explosive.
There are different degrees of protection against explosive dusts and hazardous area Zone 22 is defined as : - "a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is not likely to occur in normal operation but, if it does occur, will persist for a short period only".
ATEX Directive 94/9/EC sets out the route electrical equipment manufacturers must take to get their products certified for use in hazardous areas.
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy. The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts.
This document provides instructions for assembling a cable gland. It includes:
1) An overview of the cable gland components and their assembly order.
2) Detailed steps for preparing the cable and gland, including stripping lengths, spreading the armour, and tightening nuts.
3) Notes on accessories that may be required like shrouds or locknuts.
4) Specifications for the cable gland such as temperature range, certification standards, and cable acceptance sizes.
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
The document provides information on various cable accessories for low voltage cables up to 1 kV, medium voltage cables up to 42 kV, and high voltage cables up to 170 kV. It lists the page numbers for sections on different cable accessories, including joints, terminations, connectors, fittings, insulators, insulation, surge arrestors, switching equipment, and power measurement and control devices. It also provides brief descriptions and product literature references for some highlighted cable accessories.
This document provides information on switch disconnectors and enclosures from Thorne & Derrick UK's i-switch product range. It describes moulded plastic enclosures and deep drawn steel enclosures for housing switchgear rated from 16A to 80A. Safety features like padlocking and an interlock to prevent unauthorized opening are highlighted. Technical specifications and application details are provided for isolator interiors, accessories, and auxiliary contacts. Dimensions and installation guidelines are also included.
This document provides information on various cable joints, terminations, glands, cleats, feeder pillars, fuse links, and arc flash products. It lists the contact information for Thorne and Derrick UK, including their phone and fax numbers. It then provides details on various heat shrink tubing products, including their specifications, approvals, chemical resistance, shrink ratios, operating temperatures, and availability.
Hazardous Area Isolators
ATEX Isolators - Zone 22 Category 3D Isolators
Craig & Derricott ATEX certified isolators and switch disconnectors for hazardous area Group II, Zone 22, Cat 3D Non-Conductive Dusts - typical installation areas include grain mills, textiles, cargo handling, powder coating plant, chemicals, woodworking and waste processing.
From July 2006 the onus was placed upon companies to ensure that all electrical equipment within their site organisation is suitable for the environment in which it is being used - this was aimed particularly at hazardous areas where there may be a possibility of a combustible atmosphere being present, even for short periods i.e. less than 10 hours/year.
People normally think of such atmospheres as being gases, mists or vapours - however there are various industries where a conductive or non-conductive dust mixed with air in the right proportion can become explosive.
There are different degrees of protection against explosive dusts and hazardous area Zone 22 is defined as : - "a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is not likely to occur in normal operation but, if it does occur, will persist for a short period only".
ATEX Directive 94/9/EC sets out the route electrical equipment manufacturers must take to get their products certified for use in hazardous areas.
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy. The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts.
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
This technical data sheet provides information on i-switch ATEX Certified Zone 1 Switch Disconnectors for use in hazardous environments. It lists the electrical ratings and certifications for disconnectors ranging from 16A to 250A. Dimensions and standard configurations are provided for each enclosure type, along with example catalogue numbers. Additional configurations can be custom ordered.
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
This document provides information on a four pole insulated heavy duty cut-out rated from 200A to 400A. It has a new incoming termination arrangement suitable for both stranded and solid copper or aluminum conductors from 95-300mm2. Each phase is contained within a separate enclosure for operator protection and easy cabling. It is made from flame retardant and electrically tracking resistant polyester material. Narrow carriers with 82mm fixing centers provide phase connection and isolation, and various neutral/earth arrangements are available. Cable entry is via a PVC grommet for installations where space is limited or a three-cable entry sealing chamber for a more traditional installation. Incoming termination uses a mechanical connector that accepts a 95-300mm
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
25kV Cable Joints & Cable Terminations
3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines. T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.
High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines. 25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock heat shrink and cold shrink cable joints and terminations for all these rail cable applications.
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
This document provides product information for the TD 145 dry pre-assembled cable termination for outdoor use. It can be used for fixed connections and in installations with high creepage currents. The termination meets IEC 60840 standards and contains a prefabricated termination, top bolt, and other components. It has a minimum creepage distance of 4650mm, fulfilling Pollution Class IV requirements. The pre-assembled termination reduces installation time and can be installed horizontally or vertically without on-site filling.
This document summarizes the Triton T3CDS cable gland from CMP Products, which uses a patented Compensating Displacement Seal system (CDS) to provide an effective seal for cable inner sheaths. The CDS system protects the cable from excess force during tightening and can accommodate various cable diameters. The cable gland provides explosion proofing certification and has a simple three-step installation process. It offers options for different materials, temperature ratings, and an integrated thread seal.
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.
Instrumentation Cables - Nuhas Oman Cataloguenuhasoman
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's expertise in cable glands spanning over 100 years. The document outlines the types of industrial and hazardous area cable glands available, including materials like brass, aluminum, and LSOH. Selection charts provide guidance on choosing the correct gland based on factors like cable type, diameter, location, and environment.
The document provides information on Integrated Ducting Systems (IDS), a patented system of polyethylene chambers, pole boxes, ducting, frames and covers for installing and accessing buried cables and ducted services. IDS chambers are lightweight, easy to install, and guarantee system integrity. The IDSMKII system further increases options by allowing a chamber to support a C250 load without a concrete surround. The document describes various IDS chamber systems and components and their specifications and uses.
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
This document provides information on cable joints, terminations, glands, cleats, feeder pillars, fuse links, and other electrical equipment from Thorne and Derrick UK. It also includes advertisements and product information for BAND-IT brand band clamps, ties, mounting hardware, and identification systems. BAND-IT offers a variety of clamping solutions for numerous industrial, construction, agricultural, and marine applications.
The document discusses 3M's cold shrink joint and termination products for medium voltage cables. It provides details on their key features such as requiring no heat, flames, or special tools during installation. The products use a silicone material and unique delivery system for reliable underground connections. A wide range of kits are available for voltages up to 36kV and cable sizes from 25mm2 to 1000mm2.
The document discusses 3M's QS1000 cold shrink joint system for medium voltage cables. It provides details on the product, including that it is a one-piece silicone joint body that is expanded and installed without tools or heat. It has three layers - a semi-conductive electrode, insulation layer, and outer semi-conductive layer. All joints are factory tested for electrical performance. A range of joint kits are listed that vary based on cable size and type.
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
This technical data sheet provides information on i-switch ATEX Certified Zone 1 Switch Disconnectors for use in hazardous environments. It lists the electrical ratings and certifications for disconnectors ranging from 16A to 250A. Dimensions and standard configurations are provided for each enclosure type, along with example catalogue numbers. Additional configurations can be custom ordered.
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
This document provides information on a four pole insulated heavy duty cut-out rated from 200A to 400A. It has a new incoming termination arrangement suitable for both stranded and solid copper or aluminum conductors from 95-300mm2. Each phase is contained within a separate enclosure for operator protection and easy cabling. It is made from flame retardant and electrically tracking resistant polyester material. Narrow carriers with 82mm fixing centers provide phase connection and isolation, and various neutral/earth arrangements are available. Cable entry is via a PVC grommet for installations where space is limited or a three-cable entry sealing chamber for a more traditional installation. Incoming termination uses a mechanical connector that accepts a 95-300mm
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
25kV Cable Joints & Cable Terminations
3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines. T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.
High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines. 25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock heat shrink and cold shrink cable joints and terminations for all these rail cable applications.
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
This document provides product information for the TD 145 dry pre-assembled cable termination for outdoor use. It can be used for fixed connections and in installations with high creepage currents. The termination meets IEC 60840 standards and contains a prefabricated termination, top bolt, and other components. It has a minimum creepage distance of 4650mm, fulfilling Pollution Class IV requirements. The pre-assembled termination reduces installation time and can be installed horizontally or vertically without on-site filling.
This document summarizes the Triton T3CDS cable gland from CMP Products, which uses a patented Compensating Displacement Seal system (CDS) to provide an effective seal for cable inner sheaths. The CDS system protects the cable from excess force during tightening and can accommodate various cable diameters. The cable gland provides explosion proofing certification and has a simple three-step installation process. It offers options for different materials, temperature ratings, and an integrated thread seal.
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.
Instrumentation Cables - Nuhas Oman Cataloguenuhasoman
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's expertise in cable glands spanning over 100 years. The document outlines the types of industrial and hazardous area cable glands available, including materials like brass, aluminum, and LSOH. Selection charts provide guidance on choosing the correct gland based on factors like cable type, diameter, location, and environment.
The document provides information on Integrated Ducting Systems (IDS), a patented system of polyethylene chambers, pole boxes, ducting, frames and covers for installing and accessing buried cables and ducted services. IDS chambers are lightweight, easy to install, and guarantee system integrity. The IDSMKII system further increases options by allowing a chamber to support a C250 load without a concrete surround. The document describes various IDS chamber systems and components and their specifications and uses.
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
This document provides information on cable joints, terminations, glands, cleats, feeder pillars, fuse links, and other electrical equipment from Thorne and Derrick UK. It also includes advertisements and product information for BAND-IT brand band clamps, ties, mounting hardware, and identification systems. BAND-IT offers a variety of clamping solutions for numerous industrial, construction, agricultural, and marine applications.
The document discusses 3M's cold shrink joint and termination products for medium voltage cables. It provides details on their key features such as requiring no heat, flames, or special tools during installation. The products use a silicone material and unique delivery system for reliable underground connections. A wide range of kits are available for voltages up to 36kV and cable sizes from 25mm2 to 1000mm2.
The document discusses 3M's QS1000 cold shrink joint system for medium voltage cables. It provides details on the product, including that it is a one-piece silicone joint body that is expanded and installed without tools or heat. It has three layers - a semi-conductive electrode, insulation layer, and outer semi-conductive layer. All joints are factory tested for electrical performance. A range of joint kits are listed that vary based on cable size and type.
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.
This document provides information on various 3M cold shrink joint kits for medium voltage cables. It describes the features of the 3M QS1000, QS2000, and QSIII joint systems, which use cold shrink silicone bodies that require no heat for installation. Tables list available joint kits for different cable types and voltage ranges, along with applicable cable sizes and dimensions. The document is intended to help users select the appropriate joint kit for their medium voltage cabling application and installation conditions.
The document provides information on 3M's QTEN high voltage cold shrink termination kit. The kit is designed for terminating polymeric and lead sheathed power cables up to 72.5kV. It contains a cold shrink body with insulation and outer sheds, as well as stress control and lug sealing tubes. Installation is quick and easy using cold shrink technology without special tools or heat. The termination meets IEC standards for high voltage cable accessories.
This document provides information on 3M Cold Shrink Tubes and End Caps, which are pre-stretched rubber sleeves that are installed over cable connections and ends without heat or tools. They provide moisture sealing and mechanical protection. The document lists the product types, features, applications, sizing information and specifications.
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. Each kit contains the necessary components to terminate one cable, including terminations, boots, sleeves, springs, tape, and instructions.
3M provides high voltage cable accessories for applications from 115kV to 145kV, including dry and wet terminations, joints, and accessories for gas insulated switchgear. 3M has nearly 40 years of experience developing cable accessory solutions using a proven core technology platform. 3M offers technical support and training to help customers select the right solution for their needs and install products correctly.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
This document provides information on 3M's Cold Shrink QT-III indoor and outdoor cable terminations and kits. It discusses the benefits of 3M's cold shrink technology including faster, simpler installation with built-in stress control and sealing compounds. It also notes 3M offers flexibility to include specific hardware and provides take-offs and terminating solutions to keep projects on time and budget. The bulk of the document consists of tables listing various single core and three core indoor and outdoor termination kits specifying cable insulation sizes, voltage ratings, and conductor size ranges.
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
The document provides product information for 3M Cold Shrink QS-III Inline Splice Kits for splicing jacketed concentric neutral and concentric neutral power cables rated for 35kV. The kits are for splicing copper or aluminum cables ranging from 1/0 AWG to 1000 kcmil. They use a cold shrink design and silicone rubber construction. Testing shows the splices meet or exceed IEEE standards for 35kV voltage class ratings.
1. The ITK kit provides 3 indoor cable terminations for use with polymeric insulated cable in controlled indoor environments subject to light condensation.
2. The termination kit contains a cable lug, water sealing mastic, silicone tube, stress control mastic, and conductive EPDM ring.
3. The kits are available for voltages from 6.1-24kV and cable diameters from 14-50mm, and meet CENELEC HD 629.1 standards.
This document describes the 3MTM Cold Shrink Joint, SC145-II/SS145-II, which is used for making shielded power cable joints rated up to 145 kV. It provides key information on the product, including its features, applications, specifications, test results, installation process, storage requirements, and contact information. The joint uses cold shrink technology requiring no special tools or heat for installation. It is designed for in-line and crossbond/shield break jointing of various cable shield types with copper or aluminum conductors.
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminations. When the removable core is taken out, the tube shrinks to provide a waterproof seal without heat or special tools. 3M's LC series kits are suitable for sealing cables rated from 0.6/1kV to 1.9/3.3kV and accommodate a wide range of cable sizes through different kit options identified by code (e.g. LC1, LC2).
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminals, with a removable core inside. Removing the core allows the tube to shrink and provide a waterproof seal. The cold shrink kits can be used on various cable types rated from 0.6/1kV to 1.9/3.3kV, require no special tools or heat, and accommodate a wide range of cable sizes.
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminals, with a removable core inside. When the core is removed, the tube shrinks to provide a waterproof seal without heat or special tools. The document describes 3M's cold shrink splice kits for cables up to 3.3kV, including acceptable cable sizes and part numbers. It also lists additional cold shrink joint products for railway applications and higher voltage cables up to 6.6kV.
Similar to QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV Cables (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their MainframePrecisely
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
What is an RPA CoE? Session 1 – CoE VisionDianaGray10
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
1. 3
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
Cold Shrink
QT-III Indoor and Outdoor Terminations
3M™ Cold Shrink Silicone Rubber QT-III terminations
are designed for faster installation and higher reliability.
3M Cold Shrink QT-III terminations offer easy installation and
reliable performance when terminating indoor and outdoor
medium voltage cable. The built-in Hi-K stress controlling
compound along with the built in sealing compound means
simpler installation on all types of cables. These factory applied
compounds make field installation easier and reduce installation
errors. Plus its high-K stress design delivers excellent BIL
performance and lower surface stress resulting in a more
compact termination. Through superior engineering, 3M Cold
Shrink QT-III terminations deliver maximum performance.
Cold Shrink QT-III Indoor Termination
1
QT-III Inverted applications
Terminations that are inverted inside of equipment (switchgear,
transformers, etc.) can be made using the QT-III indoor tubular
design. However, for outdoor applications skirted terminations
are recommended. The standard skirts of most terminations are
oriented to shed water when installed in the upright direction.
The skirts could collect moisture and contamination when
inverted. This could lead to tracking problems. 3M has designed
the 7600-S-INV series inverted kits to eliminate this problem.
These inverted kits are recommended for all outdoor inverted
applications.
Cold Shrink technology; over 30 years of
field-proven reliability
Over thirty years ago, 3M pioneered Cold Shrink
technology. Since then, field use and laboratory analysis have
repeatedly proven its merits and reliability. Through constant
innovation, we have refined Cold Shrink products making them
better than ever. They’re easier to apply and built to withstand
even the most punishing environmental conditions. Enhanced
performance at a lower installed cost continue to make 3M the
preferred choice for Cold Shrink solutions.
Cold Shrink QT-III Outdoor Termination
Cold Shrink Benefits
Lower Installed Cost
• Minimal training required
• All materials included in the kit
• Easy cable preparation
• Compact to fit into smaller equipment
2
QT-III Termination Features
Improved long term reliability
• Hydrophobic silicone body
• Superior track and erosion resistance
• Optimum high-K stress control
• Built-in sealing and stress controlling compounds
• Outstanding UV stability
• Designed to meet IEEE 48, CENELEC 0278 and IEC 502
standards
• Easier installation
• Installation requires no silicone tape or grease
• Shorter installed length
High Reliability
• No heat, flames or special tools needed
• Simple, straight forward installation
• Built-in stress relief
• 30 years of proven field experience