This document is a curriculum vitae for Japharkhan, a mechanical equipment specialist with over 20 years of experience in oil, gas, power generation, and industrial production. It outlines his work history, qualifications, skills, and training. Currently, he works as a field service engineer for a turbine manufacturer in the Middle East. His experience includes installation, commissioning, maintenance, and troubleshooting of various rotating equipment like steam and gas turbines, pumps, and compressors. He is proficient in alignment, vibration analysis, and safety procedures.

1. CURRICULUM VITAE jkhan42@hotmail.com
JAPHARKHAN.
Field service Engineer
A Mechanical Equipment Specialist with More than 20 years’ experience
within the Oil and Gas, Power Generation and Industrial Production
professions. I’m motivated, reliable, trustworthy, hardworking and able
to work on both own initiative and as part of a team.
Highly talented and hands-on experience of wide range of rotating
equipment, commissioning and particularly enjoys diagnostic and
analytical skills.
 Currently Employed with Turbo machineries original equipment
manufacturer Field service department as a Field service Engineer in
Middle East region. From 2012 to till date.
Core Strengths.
 Installation &commissioning of rotating machines.
 Thorough knowledge of steam turbines &exposure in
Parts/components and Erection, Trouble Shooting.
 Modification in mechanical device for effective working.
 Prepared technical records and documents.
 Follow-up the SPIR for the Equipment’s.
 Supervise field work effectively in an assigned responsibility.
 Installed machinery on site and operated successfully in first chance.
 Installing, operating and troubleshooting of rotating devices.
 Reviewing ongoing maintenance work, routine monitoring of rotating
equipment overhauling activities.
 Familiar with engineering standards specification, process and planning
techniques.
 I had understanding of best industry practices regarding maintenance
activities and work processes.

2.  Doing Preventive Shutdown and Scheduled Maintenance.
 Strong technical knowledge of mechanical seals & Dry gas
seals.
 Strong technical knowledge of API mechanical seal plans.
 Good knowledge read and understands Hydraulic drawings, schematics
and diagrams.
Skills.
 Excellent communication and interpersonal skills, leadership and
working through others, conceptual and analytical thinking.
 Managing change and good problem solving skills,
 I have ability to work under pressure and give maximum output.
 Knowledge of computer interpersonal, communication and
presentation skills.
 Excellent IT & presentation skills.
QUALIFICATION:
 Diploma in Mechanical Engineering from Technical Board Karnataka
Bangalore, India.
Experience details:
 April-08 to April2012 in Mechanical Maintenance Department:
SABIC petrochemical company Al- Jubail KSA.(4years)
 October 1997 to March 2008: Worked in Mechanical Maintenance&
Turbine overhauling department in SWCC Power Plant Jubail, KSA, one
of the biggest Power plants in the Kingdom.(11years)
 January 1988 to August 1997: Worked in Bharat Earth Movers Limited,
India (ISO 9002 certified by BVQI).worked in a Maintenance
Department, (9years)

3. In power plant:
 I attended Preventive and Breakdown Maintenance of various
Mechanical Equipment’s i.e., 127&60 MW Steam Turbine, Multi-stage
Centrifugal Pumps, Steam Turbine (Driving unit) for Pumps, F.D.Fans.
Hands-on overhauling experience of the following steam & gas
turbines, compressors.
6X60 MW- FRANCO TOSI, ITALY.
5X127MW- FRANCO TOSI, ITALY.
5X127MW- MITSUBISHI, JAPAN.
5x30 MW
FRANCO TOSI, ITALY (prime mover for boiler feed water
pump KSB).
2 X 30 MW Gas turbine FIAT ITALY
 Dresser rand Turbines (Multi stage & single stage)
 Elliott steam Turbines (Multi stage & single stage)
 Centrifugal gas compressor MITSUBISHI, JAPAN.
 Dresser Rand centrifugal compressors.
 Terry steam turbine.
 Turbo dyne steam turbine.
 Worthington steam turbine.

4. Green field project SABIC Petrochemical company Al-Jubail
Company profile:
 Biggest giant Petrochemical Company in Saudi Arabia’s having
9Plants and more than 14 end products.
Responsibility:While commissioning period of project actively and
involved in Erection & Pre-commissioning, Commissioning (CSU)
activity. (Project completed from 2008 to 2010)
 EPC contractor FLUOR ARABIA LTD.
 Readiness Program(PRP), Risk Assessment, SMP Development and
Safety Training Activities.
 Perform Q-Round to observe positive & negative findings.
 Preparing the Punch list &check list of the Rotating equipment.
 Reviewing the Data sheet &Drawings.
 Checking the pre and final alignment of the Rotating equipment’s.
 Write reports and send to PMT or vendor for the ratification of the
problem.
 Pipe stress checking with EPC contractors of rotating equipment.
 Actively involved on Commissioning of fallowing Rotating equipment of
Elliott &Ebara Manufacturer& Ingersoll Rand compressors, Dresser -
Rand steam Turbines, API Machines.
 Multistage centrifugal compressor Ingersoll Rand.
 Sea water circulation vertical pumps.(EBARA)
 Cooling water circulation pump. Turbines driven. (EBARA+ELLIOTT)
 Steam Turbines’ single &multistage, Driver for Boiler feed water
pumps & Boiler FD Fans cooling water circulation pump’s API std YR
TURBINEs (ELLIOTT) Multistage Boiler feed water pumps
(HP&VHP) TORISHIMA.and KSB
 Attended EBARA vertical sea water circulation pump assembly in
workshop for 15 days.

5. Trainings.
 Steam Turbine Training in UK OEM Dresser-Rand Peterborough In
October2012.
 Reciprocating compressor Training In UK OEM Dresser- Rand
Peterborough In November2012
 Training from Ingersoll Rand Centrifugal compressor. Mr. Charles
from Italy. Conducted in Saudi Arabia by SABIC petrochemical
company.
 SteamTurbine operation and Maintenance training on OCT 2009 In
Saudi Arabia DRESSER- RAND Trainer MR. DAVE. ROBBINS fromUK
 Training fromVendor Elliot-For Multi stage YR Turbines. Mr. ROBERT
SPIGARELLI from US. Conducted in Saudi Arabia by SABIC
petrochemical company.
 Training from Torishima Pump manufacturer- Feed water pumps
HP&VHP Motor & Turbine Driven pumps.
 Expert in laser alignment (PROTALIGN®PRO&ROTALIGN) certified by
PRUF TECH NIK German.
 Successfully completed Training of Hydraulic control system of steam
Turbine from professionally experienced Instructors, from SWCC
power plant training center Saudi Arabia.
 From SKF Reliability Maintenance Institute attend 40 hours vibration
analysis category2. On dated June 2013.
 Work Permit System, Lockout & Tag Out: Follow the Safety Health
Environment Management (SHEM) standard in receive of work
permits, major overhaul activities and cancellation of permits.

6.  Attend safety Training &safety seminars (Health safety Handling of
chemicals).
 Confined Space Rescue Confined Space.
 Entry Industrial Fire Fighting.
 Hazardous Materials Response.
Personnel summary,
Name JAPHAR KHAN.
Date of Birth 10, August 1964
Nationality Indian: city (Bangalore)
Driving License GCC Driving License
Languages Known English & Urdu, Kannada, Tamil and Arabic (fluent).
Mobile number -00 966 556111419.