Carmelito O. De losReyes Jr. provides his resume, detailing his experience as a technician and machinist working on mechanical equipment in various industries. He has skills in machine operation, mechanical assembly and disassembly, technical drawing reading, and preventative maintenance. The resume lists his work history over the past 8 years in Saudi Arabia and the Philippines, maintaining and repairing equipment in petrochemical plants, oil refineries, and other industrial facilities.

1. Carmelito O. De losReyes Jr.
9565793/c14_delosreyes@yahoo.com.ph/+639771639290
Job Description
As Technician I am in charge in in all mechanical works such as dismantle and assembling
mechanical equipment, installation motor driven equipment.Also in charge in preventive maintenance
and repairing the equipment in all sorts ofweather or environment conditions, Fits and assembles parts
into complete assembly. As experience machinistI do some machining involve in revisions as plan in
equipment for better function, fabricating some parts or adjustment, setting right tolerance as vendor
requirements.
As employee I always perform my job according to blueprints/drawings, manual and procedure,
and supervisors advice. Taking personal responsibility to report any faults to the Shop Supervisor,EHS
leader and/or Plant Manager.
Skills and knowledge
> Confident in my alignment thru rim and face and reverse method.Knowledge in using laser alignment.
> experience assembling and disassembling equipment such as pumps (centrifugal, reciprocating and gear
type) equipment following procedures as per manufacturer requirements.
>experience assembling and disassembling equipment such as compressor (centrifugal, reciprocating and
gear type) equipment following procedures as per manufacturer requirements.
>experience assembling and disassembling Steam turbine following procedures as per manufacturer
requirements.
>experience working in conveyors.
>read and understand blueprint/isometric and orthographic drawing
>confident in my measuring skill with the instruments such as vernier caliper, micrometer, dials, bore
gauge and slip gauge.
>knowledge in checking run-outs
>knowledge in assembly and repair valves, such as gate valve and ball valve
>I am an all-around machinist. I can operate different conventional machines such as lathe, milling,
boring, shaper, surface grinder, cylindrical grinder tool and cutter and radial machine. I have also
knowledge in programing and operating e.d.m. wire cut.
> I have knowledge fabricating and repairing machine parts such gears, leads screws, bearing seating and
fittings bolt and nuts and others based on drawings and sample.

2. Work Experience
Mosanada UGL
Doha, Qatar
December 9, 2014 – up to present
Site technician
Joint venture between Aspire Katara Investments, Qatar Olympic Committee and UGL Services.
Mosanada UGL provides integrated facilities management services in Qatar, from inception of build
design through to disposal of the property.
UGL's Services businessprovides end-to-end corporate real estate and facilities management services to
corporations, governments and institutions in Australia, New Zealand, Asia, North America and the
Middle East.
Through five complementary brands – UGLServices (Australia & New Zealand), UGL Services (Middle
East), UGLServices - Premas Operations, UGLServices - Equis and UGLServices - Unicco Operations –
the company delivers clients integrated solutions on a local, regional, national and multi-national basis.
-Reports to Site Supervisor. Responsible for oversee the Operations and Maintenance ofvenues especially
mechanical equipment and plumbing. The facilities include indoor athletic track, indoor football pitch,
sports academy, multipurpose hall and football pitches etc. Responsible for scoping the works for the
Maintenance Contracts, monitoring contractor works related to MEP, Civil and Lifts. Preparing daily
technical rounds report on operation and maintenance. Reviewing and verifying the PPM reports from
contractors. Oversee the rectification woks on the site and ensures they work in proper tools, procedure
and safe act. Reviewproject periodically and escalate the issues to Site Supervisors, wherever required.
Solving problems by technical analysis, group discussions, explore alternatives, and propose quality
solutions. Implement Safety inspections on contractors’site works in line with QEHS requirements.Assist
in CMMS (MAXIMO) operation at site.
(My main company for 2 years in SaudiArabia was Abdul Mohsen Abdurrahman Almousa Gen. Cont. Ltd. It
supplies me in different contractors who requires my skills)
SIPCHEM
Al Jubail K.S.A.
November 27 2013-May 22 2014
AYTB (maintenance)
SIPCHEM is a petro chemical plant producing different chemicals.
MILLWRIGHT MACHINIST
-in workshop team, in charge in overhauling, replacement ofmechanical seal, bearings and setting
equipment as per vendors requirements.Machining parts for replacement, adjustment or revision as per
reliabity or supervisors advice. Checking run outs, measuring newparts and confirming if it’s in the right
tolerance.
SHARQ
Al Jubail, K.S.A.
November 2, 2013-November 26 2013
AYTB (shutdown)
SAHRQ is a petro chemical producing different chemicals and also polymer.
MILWRIGHT
-assigned in assisting overhauling Extruder units with the vendor.
CHEVRON
Al Jubail K.S.A
November 26 2012-October 30 2013
SMH (shutdown and maintenance)

3. CHEVRON is a petro chemical producing different chemicals and also polymer.
MILLWRIGHT MACHINIST
-Hired as shut downer in JCP/NCP Plant for shutdown as all around machinist. Fabricating Plunge, blinds
machine parts and as per required of the plant needs. After shutdown absorb in SPICO Plant as millwright to
work in commissioning. Overhauling, repairing and maintenance of pumps, compressor and other rotating
equipment. Checking run outs, measuring newparts and confirming if it’s in the right tolerance.
KEMYA
Al Jubail, K.S.A.
October 10 2012- Nov 24 2012
Al Amara (shutdown)
KEMYA is a petro chemical producing different chemicals and also polymer.
MACHINIST TECHNICIAN
-Assist in shutdown works like fabricating or repairing of different parts as per drawing and supervisors
advice. Checking run outs, measuring newparts and confirming if it’s in the right tolerance.
ARAMCO
Rahima Ras Tanura, K.S.A.
September 2 2012-october 6 2012
Hadi Al Hammam (pipe laying)
ARAMCO is oil mining and refining company.
MACHINIST TECHNICIAN
-hired as machinist and assigned in hydro testing of different valve to be installed in pipe laying with the
ARAMCO inspector.
Arabian Industrial fibers Co. (Ibn Rushd)
Yanbu, K.S.A.
June 24 2012-august 31 2012
ERAM Engrng. (maintenance)
IBN RUSHD is a petro chemical producing different chemicals and also polymer.
MACHINIST TECHNICIAN
-work in central machine shop which in charge in supporting millwrights in fabricating or repairing in rotating
equipment as per drawing or supervisor advice. Checking run outs, measuring newparts and confirming if it’s
in the right tolerance.
Arms Corporation of the Philippines
Fortune Ave., Brngy. Fortune, Marikina City
November 20, 2008 – Feb 21, 2012
Arms Corporation of the Philippines is a large ISO company which fabricates guns and ammunition.
MACHINIST TECHNICIAN
-work in Tooling Department as all around machinist. Repair and fabricate tool and die, molds and different
machine parts and assemble and fit it. I am also trained in programing and operating E.D.M. wirecut
machine. Fabricating different part such as bolt and nuts, gear and other work piece as per drawing and
costumer advice.
GM Industrial Services Phil., inc.
L.bica Comp., Lawang Bato, Valenzuela City
June 14 2008 – October 18,2008
GM Industrial Services Phil., inc. is company producing polymer product such as bottles, caps and pails.
MACHINIST TECHNICIAN
-work as general technician, machining repairing of molds. Overhauling of rotating equipment such as pump,
motor and extruders.

4. Plastmack, inc.
Punturin Compd., Brngy. Punturin, Valenzuela City
august 2007- June 13, 2008
Plastmack, inc. is company producing polymer product such as bottles, caps and pails.
MACHINIST TECHNICIAN
-work as general technician, machining repairing of molds. Overhauling of rotating equipment such as pump,
motor and extruders.
Rian commercial
brngy. Tumana, Concepcion Uno, Marikina City
May 2007- August 2007
Rian commercial is a company producing rubbers, wood product and walling brackets for industries.
MACHINIST TECHNICIAN
-work in Tooling Department as all around machinist. Repair and fabricate tool and die, molds and different
machine parts and assemble and fit it. Giving proper tolerance and assembly as per drawing.
Ras Tooling
Molave, Marikina city
August 2006- March 2007
Ras Tooling is a company producing small metal product such as hinges, door knobs and door locks.
MACHINIST
-work as part timer as lathe and milling machine operator.
EducationalAttainments
College: Marikina Polytechnic College
Sta. Elena, Marikina City
3- year Diploma of Technology major in Mechanical
s.y. 2004-2007
Polytechnic University of the Philippines
Sta. Mesa, Manila
Bachelor of Science major in Mechanical Engineering
s.y. 2003-2004
Secondary: Parang High School
Tandang Sora st., Parang, Marikina City
s.y. 1999-2003
Primary: St. Mary Elementary School
Nangka, Marikina City
s.y. 1996-1999
Kapitan Moy Elementary School
Sta. Elena, Marikina City
s.y. 1993-1996

5. PersonalData
Age: 29
Gender: Male
Birthday: September 17, 1985
Birthplace: Sto.Nino, Marikina City
Civil status: married
CharacterReferences
Donnie Santos Mr. Antonio Medina
Millwright Specialist Tool and Die Dept. Supervisor
Chevron Phillips (SPICO) ArmsCorp. Of the philippine / 9416243
Engr. Ceasar Casuga Jr.
Production Head
GM Industrial Services Phil., inc./443-58-04 / 05