Fdm star4 english
•
0 likes•41 views
This document describes a new drill bit made possible by advanced coating and polishing technologies. The drill bit can drill holes with diameters of 8mm or 10mm through ultra-high-strength steel sheets of 1,500MPa. It has unparalleled cutting power and overwhelming durability due to its original coating. Custom orders and rebuilds are available.
Report
Share
Report
Share
Download to read offline
Recommended
Stainless steel products
In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable, is a steel alloy, with a minimum of 10.5% chromium content by mass and a maximum of 1.2% carbon by mass. Stainless steels are most notable for their corrosion resistance, which increases with increasing chromium content.
Flashings Fasteners & Accessories
The document discusses various flashing, fasteners, and accessories used in roofing. It provides details on different types of flashings, fasteners, screws, clips, sealants, and roof penetration components. Various factors are outlined for determining the proper fastener based on the materials being joined and load/environmental requirements. Material strengths, corrosion resistance, and installation considerations are also addressed.
Stainless steel alloys
Stainless steel alloys are used widely in orthodontics. They contain 12-30% chromium which gives corrosion resistance. There are three main types - ferritic, austenitic and martensitic - depending on crystal structure. Austenitic stainless steel like 18-8 is most common due to good ductility. It can be work hardened or hardened by rapid cooling to form martensite. Heat treatments like annealing can relieve stresses from work hardening. Stainless steel is joined by silver soldering or spot welding in orthodontics.
Stainless steel presentation
This is very useful presentation to understand basic concept of Stainless steel and its metallurgical aspects
Penn Stainless Products: Stainless Steel Applications
1. The document discusses stainless steel applications and corrosion prevention best practices. It provides an overview of corrosion costs and how they can be reduced by using corrosion-resistant materials like stainless steel and following best practices.
2. It describes proper stainless steel handling, fabrication, and maintenance to preserve the chromium oxide layer and prevent contamination, which can lead to corrosion. Proper practices include keeping stainless separate from carbon steel and avoiding grinding near stainless.
3. The document outlines different types of corrosion including uniform, pitting, crevice, and provides examples of how corrosion can be prevented by selecting the right material and surface finish for an application. Maintaining polished surfaces and avoiding chlorides and contaminants are emphasized.
Engineering Material
The document discusses various materials and processes used in engineering and marine engineering. It describes the production of pig iron from iron ore in a blast furnace. It also discusses different steel making processes like the bessemer process and electric arc furnaces. It explains casting processes like sand casting and die casting. It describes forging and cold working. It provides the typical carbon content ranges for different steels and cast iron. It contrasts the properties of ferrous and non-ferrous metals. It gives examples of applications of non-ferrous materials in marine engineering and discusses the purpose of alloying elements like nickel, chromium, and molybdenum in steels used in marine engineering.
Cast iron
The document provides information on cast iron, including its history, manufacture, composition, types, properties, uses, production/processing, and future applications. Some key points:
- Cast iron was invented in China in the 5th century BC and has carbon content above 2%.
- It is manufactured by re-melting pig iron in a cupola furnace to remove impurities and produce molten cast iron for casting.
- The main types include grey, white, mottled, chilled, and spheroidal graphite (ductile) iron.
- It has properties of being relatively low melting, strong in compression but weak in tension, and not magnetic or ductile.
- Common uses include
Material and substrates
The document discusses various substrates and materials used for roofing and cladding including coated carbon steel, galvanized steel, galvalume, aluminum alloys, and steel grades and gauges. It provides details on hot dipped galvanized steel, galvalume, and compares the corrosion resistance of galvanized steel versus galvalume. Aluminum alloys such as 3003, 3004, 3105 and 5052 are outlined along with standard tempers and thicknesses used for roofing products.
Recommended
Stainless steel products
In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable, is a steel alloy, with a minimum of 10.5% chromium content by mass and a maximum of 1.2% carbon by mass. Stainless steels are most notable for their corrosion resistance, which increases with increasing chromium content.
Flashings Fasteners & Accessories
The document discusses various flashing, fasteners, and accessories used in roofing. It provides details on different types of flashings, fasteners, screws, clips, sealants, and roof penetration components. Various factors are outlined for determining the proper fastener based on the materials being joined and load/environmental requirements. Material strengths, corrosion resistance, and installation considerations are also addressed.
Stainless steel alloys
Stainless steel alloys are used widely in orthodontics. They contain 12-30% chromium which gives corrosion resistance. There are three main types - ferritic, austenitic and martensitic - depending on crystal structure. Austenitic stainless steel like 18-8 is most common due to good ductility. It can be work hardened or hardened by rapid cooling to form martensite. Heat treatments like annealing can relieve stresses from work hardening. Stainless steel is joined by silver soldering or spot welding in orthodontics.
Stainless steel presentation
This is very useful presentation to understand basic concept of Stainless steel and its metallurgical aspects
Penn Stainless Products: Stainless Steel Applications
1. The document discusses stainless steel applications and corrosion prevention best practices. It provides an overview of corrosion costs and how they can be reduced by using corrosion-resistant materials like stainless steel and following best practices.
2. It describes proper stainless steel handling, fabrication, and maintenance to preserve the chromium oxide layer and prevent contamination, which can lead to corrosion. Proper practices include keeping stainless separate from carbon steel and avoiding grinding near stainless.
3. The document outlines different types of corrosion including uniform, pitting, crevice, and provides examples of how corrosion can be prevented by selecting the right material and surface finish for an application. Maintaining polished surfaces and avoiding chlorides and contaminants are emphasized.
Engineering Material
The document discusses various materials and processes used in engineering and marine engineering. It describes the production of pig iron from iron ore in a blast furnace. It also discusses different steel making processes like the bessemer process and electric arc furnaces. It explains casting processes like sand casting and die casting. It describes forging and cold working. It provides the typical carbon content ranges for different steels and cast iron. It contrasts the properties of ferrous and non-ferrous metals. It gives examples of applications of non-ferrous materials in marine engineering and discusses the purpose of alloying elements like nickel, chromium, and molybdenum in steels used in marine engineering.
Cast iron
The document provides information on cast iron, including its history, manufacture, composition, types, properties, uses, production/processing, and future applications. Some key points:
- Cast iron was invented in China in the 5th century BC and has carbon content above 2%.
- It is manufactured by re-melting pig iron in a cupola furnace to remove impurities and produce molten cast iron for casting.
- The main types include grey, white, mottled, chilled, and spheroidal graphite (ductile) iron.
- It has properties of being relatively low melting, strong in compression but weak in tension, and not magnetic or ductile.
- Common uses include
Material and substrates
The document discusses various substrates and materials used for roofing and cladding including coated carbon steel, galvanized steel, galvalume, aluminum alloys, and steel grades and gauges. It provides details on hot dipped galvanized steel, galvalume, and compares the corrosion resistance of galvanized steel versus galvalume. Aluminum alloys such as 3003, 3004, 3105 and 5052 are outlined along with standard tempers and thicknesses used for roofing products.
17 4 ph stainless steel
1) 17-4 PH stainless steel is a martensitic stainless steel that is precipitation hardened through heat treatment to improve its yield strength.
2) It contains around 3-5% copper which precipitates out as small particles during aging, strengthening the steel.
3) The precipitation hardening process involves solution heat treatment to dissolve precipitates, quenching to form martensite, and aging to form precipitates that strengthen the martensitic microstructure.
"Stainless Steel"
Stainless steel is an alloy of iron, chromium, and sometimes nickel that is known for its corrosion resistance and strength. It requires a minimum of 10.5-11% chromium content to give it good corrosion resistance through the formation of a passive chromium oxide layer. There are several types of stainless steel including austenitic, ferritic, martensitic, duplex, and precipitation hardening grades, each with different microstructures and properties. Stainless steel finds wide application in industries such as medical, chemical processing, marine, and automotive due to its corrosion resistance.
All About Stainless Steel
One of the amazing things about steel is all of the forms and qualities it can take on. Of these, stainless steel is incredibly popular due to its corrosion resistance combined with its strength and formability. At Pacesetter, stainless steel is one of the major products we process and distribute. As such, it’s a product we know a lot about, and seek to educate our partners on as well.
So, what is stainless steel?
Stainless steel
This presentation will help to understand basics of Stainless steel, its different types, metallurgical aspects and various application
Stainless steel material
Stainless steel is an alloy of iron with at least 10.5% chromium which forms a passive oxide layer that prevents corrosion. It also contains elements like carbon, nickel, and copper. There are three main families: ferritic (contains chromium and carbon), martensitic (similar to ferritic but can be hardened), and austenitic (contains 8% nickel and 18% chromium, highly weldable and formable). Stainless steel has high strength, hardness, ductility, corrosion resistance, and hot strength. Its applications include cookware, cutlery, pipes, automotive and ship components, and use in chemical plants due to its corrosion resistance.
Grey Cast Iron Grades Composition and Properties
This document provides information on grey cast iron materials from Qingdao Casting Quality Industrial Co., Ltd., including:
1. Descriptions of the composition, properties, and grades of grey cast iron.
2. Tables listing mechanical properties like tensile strength for different grades and casting thicknesses.
3. Suggested chemical compositions for different grades.
4. Information on heat treatment and how it affects hardness and microstructure.
Stainless Steel & Duplex Steel
Duplex stainless steel is a type of stainless steel that is composed of grains of two types of stainless steel material, austenitic and ferritic. The word "duplex" refers to the two-phase micro structure of ferritic and austenitic steel grains.
Cost Saving Benefits of FRP
With the price of steel constantly fluctuating, Fibergrate's fiberglass reinforced plastic (FRP) now has a very comparative price versus glvanized steel.
Difference between various coated steel products
The document discusses different types of metal coated steel products, including galvanized steel, galvalume, galvannealed, and galfan. It explains that the coatings protect the steel surface from corrosion and oxidation. Each product has different applications depending on its environment. The document provides details on the composition, coating designations, applications, and corrosion resistance of the four main coated steel products. It also discusses trademarks, grade designations, and additional information about standards and pre-painted varieties.
Media for Furniture Designing
This document provides information on various materials that can be used for furniture, including metal, fiberglass/resin, upcycled materials, and mixed media. It discusses different types of metals like ferrous metals, non-ferrous metals, and various steel alloys. It also outlines the properties and uses of fiberglass/resin composites. Upcycled materials turn waste into new products, while mixed media uses multiple materials in one piece like combining metal, wood, and fabric. Overall, the document offers an overview of material options for furniture design and construction.
Cutting tool material
The document discusses various cutting tool materials, their properties, manufacturing processes, and applications. It describes the key properties of wear resistance, hot hardness, and toughness that determine a material's performance as a cutting tool. Common materials discussed include carbon tool steel, high-speed steel, cast cobalt alloys, cemented carbides, ceramic, and diamond. Guidelines are provided for selecting the appropriate material based on the application.
Hardness testing
Indentation hardness is used to measure the hardness of metals by forcing an indenter into the material under a specified load. There are two main types of indentation hardness tests: Brinell and Rockwell. The Brinell test uses a spherical indenter forced into the material, and the indentation diameter is measured. The Rockwell test uses various diamond-tipped and steel ball indenters and applies different loads. Indentation hardness values correlate to the material's tensile strength and hardness increases with work hardening effects from processes like drilling, punching, and machining. Pre-heating and minimizing work hardening is important when welding austenitic stainless steels to prevent cracking and embrittlement.
STAINLESS STEEL AND THEIR TYEPS
Stainless steel was discovered in 1913 by Harry Brearley, who noticed that a 13% chromium steel sample had not corroded after several months of experimentation. However, the full history is more complex. Stainless steel is defined as containing at least 10.5% chromium, which forms a passive oxide layer on the surface to prevent corrosion. Common types include ferritic, austenitic, martensitic, and duplex stainless steels, which differ in their crystalline structures and alloying elements. Austenitic stainless steels like 304 and 316 are the most widely used grades.
Steel Siding 101
Ply Gem Steel Siding is a rugged, durable steel siding product that is available in a variety of eye-popping colours. It is engineered to protect and beautify your home for decades to come.
Stainless steel piping
This document is covering some aspects about stainless steel piping. The reason that stainless steel is important is .... you can read the booklet.
Manufacturing & Applications of Stainless Steels
All stainless steels contain chromium, with the chromium content exceeding 11% and being present as a solute rather than bonded with other elements. Stainless steel originated about 100 years ago with martensitic types, and advances in steelmaking technology now allow for high-chromium, low-carbon steels to be produced. The main stainless steel types are martensitic, ferritic, and austenitic stainless steels, which differ in their chemical compositions and properties.
Ceramic foam filter
Qingdao Boffin-Toda Advanced Ceramics Co., Ltd is a Chinese company that specializes in manufacturing and selling ceramic foam filters for foundries. They allocate profits to research and development to improve production technologies and develop new product lines. Their main products include silicon carbide, alumina, and zirconia ceramic foam filters in various sizes and shapes that can filter molten iron, non-ferrous metals, and steel alloys at high temperatures. They also produce mullite-based honeycomb ceramic filters and ceramic pouring cups for foundries.
Esteller - Distribuidor de CRKT en España y Portugal - Catálogo 2017 (EN)
Esteller te trae las mejores marcas para que disfrutes de un estilo de vida activo.
Descubre el último catálogo de Columbia River Knife and Tool, cuchillos y navajas para caza.
Dewatering Filter
JET Filter System LLC provides various sizes and materials for weep hole filter valves, primarily used for concrete and steel seawalls, sheet piling, retaining walls, and bridge abutments. Product offerings include 316 stainless steel and ABS filters in diameters from 2 1/2 to 6 inches and lengths from 4 to 8 inches, available in stainless steel, powder coated steel, or colors like slate, gray, brown and clay. They also offer geocomposite wick drainage systems and geotextile filtration and erosion control products.
Stainless steel 316 l flanges
Along with Stainless Steel 316L Flanges we are manufacturer and exporter of other grades such as A182 GR.304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 316LTi, 317L, 321, 321H, 347, 347H, 904L, 410, 420, 430, 409M, XM19, 17-4PH, 15-5PH.
Visit Us :- http://alloy-steel-pipefitting.com/product-stainless-steel-316l-flanges-11.htm
B-PRO（ビープロ）カタログ
B-PROとはカーケミカルメーカーが「性能」「使いやすさ」「コストパフォーマンス」に重点を置いて開発したプロユースのためのカーケアブランドです。 カーディーラーや整備工場など自動車のプロのフィールドで信頼と実績を重ね、その使いやすさから、プロはもちろん、一般のお客様にも身近なプロユース製品としてご利用いただいております。幅広く、隅々まで届くプロの品質と性能を、ぜひ体験してみてください。
B-PRO（ビープロ）について詳しくはこちら
https://finepiece.delivery/list.php?c_id=429
More Related Content
What's hot
17 4 ph stainless steel
1) 17-4 PH stainless steel is a martensitic stainless steel that is precipitation hardened through heat treatment to improve its yield strength.
2) It contains around 3-5% copper which precipitates out as small particles during aging, strengthening the steel.
3) The precipitation hardening process involves solution heat treatment to dissolve precipitates, quenching to form martensite, and aging to form precipitates that strengthen the martensitic microstructure.
"Stainless Steel"
Stainless steel is an alloy of iron, chromium, and sometimes nickel that is known for its corrosion resistance and strength. It requires a minimum of 10.5-11% chromium content to give it good corrosion resistance through the formation of a passive chromium oxide layer. There are several types of stainless steel including austenitic, ferritic, martensitic, duplex, and precipitation hardening grades, each with different microstructures and properties. Stainless steel finds wide application in industries such as medical, chemical processing, marine, and automotive due to its corrosion resistance.
All About Stainless Steel
One of the amazing things about steel is all of the forms and qualities it can take on. Of these, stainless steel is incredibly popular due to its corrosion resistance combined with its strength and formability. At Pacesetter, stainless steel is one of the major products we process and distribute. As such, it’s a product we know a lot about, and seek to educate our partners on as well.
So, what is stainless steel?
Stainless steel
This presentation will help to understand basics of Stainless steel, its different types, metallurgical aspects and various application
Stainless steel material
Stainless steel is an alloy of iron with at least 10.5% chromium which forms a passive oxide layer that prevents corrosion. It also contains elements like carbon, nickel, and copper. There are three main families: ferritic (contains chromium and carbon), martensitic (similar to ferritic but can be hardened), and austenitic (contains 8% nickel and 18% chromium, highly weldable and formable). Stainless steel has high strength, hardness, ductility, corrosion resistance, and hot strength. Its applications include cookware, cutlery, pipes, automotive and ship components, and use in chemical plants due to its corrosion resistance.
Grey Cast Iron Grades Composition and Properties
This document provides information on grey cast iron materials from Qingdao Casting Quality Industrial Co., Ltd., including:
1. Descriptions of the composition, properties, and grades of grey cast iron.
2. Tables listing mechanical properties like tensile strength for different grades and casting thicknesses.
3. Suggested chemical compositions for different grades.
4. Information on heat treatment and how it affects hardness and microstructure.
Stainless Steel & Duplex Steel
Duplex stainless steel is a type of stainless steel that is composed of grains of two types of stainless steel material, austenitic and ferritic. The word "duplex" refers to the two-phase micro structure of ferritic and austenitic steel grains.
Cost Saving Benefits of FRP
With the price of steel constantly fluctuating, Fibergrate's fiberglass reinforced plastic (FRP) now has a very comparative price versus glvanized steel.
Difference between various coated steel products
The document discusses different types of metal coated steel products, including galvanized steel, galvalume, galvannealed, and galfan. It explains that the coatings protect the steel surface from corrosion and oxidation. Each product has different applications depending on its environment. The document provides details on the composition, coating designations, applications, and corrosion resistance of the four main coated steel products. It also discusses trademarks, grade designations, and additional information about standards and pre-painted varieties.
Media for Furniture Designing
This document provides information on various materials that can be used for furniture, including metal, fiberglass/resin, upcycled materials, and mixed media. It discusses different types of metals like ferrous metals, non-ferrous metals, and various steel alloys. It also outlines the properties and uses of fiberglass/resin composites. Upcycled materials turn waste into new products, while mixed media uses multiple materials in one piece like combining metal, wood, and fabric. Overall, the document offers an overview of material options for furniture design and construction.
Cutting tool material
The document discusses various cutting tool materials, their properties, manufacturing processes, and applications. It describes the key properties of wear resistance, hot hardness, and toughness that determine a material's performance as a cutting tool. Common materials discussed include carbon tool steel, high-speed steel, cast cobalt alloys, cemented carbides, ceramic, and diamond. Guidelines are provided for selecting the appropriate material based on the application.
Hardness testing
Indentation hardness is used to measure the hardness of metals by forcing an indenter into the material under a specified load. There are two main types of indentation hardness tests: Brinell and Rockwell. The Brinell test uses a spherical indenter forced into the material, and the indentation diameter is measured. The Rockwell test uses various diamond-tipped and steel ball indenters and applies different loads. Indentation hardness values correlate to the material's tensile strength and hardness increases with work hardening effects from processes like drilling, punching, and machining. Pre-heating and minimizing work hardening is important when welding austenitic stainless steels to prevent cracking and embrittlement.
STAINLESS STEEL AND THEIR TYEPS
Stainless steel was discovered in 1913 by Harry Brearley, who noticed that a 13% chromium steel sample had not corroded after several months of experimentation. However, the full history is more complex. Stainless steel is defined as containing at least 10.5% chromium, which forms a passive oxide layer on the surface to prevent corrosion. Common types include ferritic, austenitic, martensitic, and duplex stainless steels, which differ in their crystalline structures and alloying elements. Austenitic stainless steels like 304 and 316 are the most widely used grades.
Steel Siding 101
Ply Gem Steel Siding is a rugged, durable steel siding product that is available in a variety of eye-popping colours. It is engineered to protect and beautify your home for decades to come.
Stainless steel piping
This document is covering some aspects about stainless steel piping. The reason that stainless steel is important is .... you can read the booklet.
Manufacturing & Applications of Stainless Steels
All stainless steels contain chromium, with the chromium content exceeding 11% and being present as a solute rather than bonded with other elements. Stainless steel originated about 100 years ago with martensitic types, and advances in steelmaking technology now allow for high-chromium, low-carbon steels to be produced. The main stainless steel types are martensitic, ferritic, and austenitic stainless steels, which differ in their chemical compositions and properties.
Ceramic foam filter
Qingdao Boffin-Toda Advanced Ceramics Co., Ltd is a Chinese company that specializes in manufacturing and selling ceramic foam filters for foundries. They allocate profits to research and development to improve production technologies and develop new product lines. Their main products include silicon carbide, alumina, and zirconia ceramic foam filters in various sizes and shapes that can filter molten iron, non-ferrous metals, and steel alloys at high temperatures. They also produce mullite-based honeycomb ceramic filters and ceramic pouring cups for foundries.
Esteller - Distribuidor de CRKT en España y Portugal - Catálogo 2017 (EN)
Esteller te trae las mejores marcas para que disfrutes de un estilo de vida activo.
Descubre el último catálogo de Columbia River Knife and Tool, cuchillos y navajas para caza.
Dewatering Filter
JET Filter System LLC provides various sizes and materials for weep hole filter valves, primarily used for concrete and steel seawalls, sheet piling, retaining walls, and bridge abutments. Product offerings include 316 stainless steel and ABS filters in diameters from 2 1/2 to 6 inches and lengths from 4 to 8 inches, available in stainless steel, powder coated steel, or colors like slate, gray, brown and clay. They also offer geocomposite wick drainage systems and geotextile filtration and erosion control products.
Stainless steel 316 l flanges
Along with Stainless Steel 316L Flanges we are manufacturer and exporter of other grades such as A182 GR.304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 316LTi, 317L, 321, 321H, 347, 347H, 904L, 410, 420, 430, 409M, XM19, 17-4PH, 15-5PH.
Visit Us :- http://alloy-steel-pipefitting.com/product-stainless-steel-316l-flanges-11.htm
What's hot (20)
Esteller - Distribuidor de CRKT en España y Portugal - Catálogo 2017 (EN)
Esteller - Distribuidor de CRKT en España y Portugal - Catálogo 2017 (EN)
More from FINE PIECE
B-PRO（ビープロ）カタログ
B-PROとはカーケミカルメーカーが「性能」「使いやすさ」「コストパフォーマンス」に重点を置いて開発したプロユースのためのカーケアブランドです。 カーディーラーや整備工場など自動車のプロのフィールドで信頼と実績を重ね、その使いやすさから、プロはもちろん、一般のお客様にも身近なプロユース製品としてご利用いただいております。幅広く、隅々まで届くプロの品質と性能を、ぜひ体験してみてください。
B-PRO（ビープロ）について詳しくはこちら
https://finepiece.delivery/list.php?c_id=429
バンザイ 水性塗料対応型塗装ブース アイリス・スーパープレミアム BB-SPI-G25（ガス式）/BB-SPI-O25（灯油式） BANZAI
信頼の国産部品を使用したプッシュプル型塗装・乾燥ブースです。
メーカー：バンザイ（BANZAI）
カテゴリ：塗装・乾燥ブース
水性塗料対応型塗装ブース
信頼の国産部品を使用したプッシュプル型塗装・乾燥ブースです。国内最大級の開口幅を誇る四つ折りドアを採用し圧迫感なく車両の搬入出が可能です。そのうち1枚に作業員ドアを内蔵し開口幅を確保しました。また、給・排気モーターのインバーター制御や熱循環方式、業界初のカラー液晶タッチパネルと切替スイッチ操作のダブル制御の採用で万が一の場合でも運転操作が可能です。水性塗料対応はじめ多数のオプションをご用意しております。
商品詳細
製品名：アイリス・スーパープレミアム
型式：BB-SPI-G25（ガス式）/BB-SPI-O25（灯油式）
特徴：信頼の国産部品を使用したプッシュプル型塗装・乾燥ブースです。
仕様：本体外寸：7,300L×4,520W×3,500H mm（給気・排気ファン含まず）
https://finepiece.delivery/product.php?id=1276
事業再構築に取り組む皆さまへ 事業再構築補助金のご案内
事業再構築に取り組む皆さまへ 事業再構築補助金のご案内
https://www.subsidyassociation.com/post/j2023
東洋精器工業 ホイールバランサー TRIM BP-68/68W TOYO SEIKI
東洋精器工業 ホイールバランサー TRIM BP-68/68W TOYO SEIKI
https://finepiece.delivery/product.php?id=1225
安全自動車 WING CZ22 タイヤチェンジャー（22インチ対応/プレミアムモデル）
安全自動車 WING CZ22 タイヤチェンジャー（22インチ対応/プレミアムモデル）
メーカー：ANZEN（安全自動車）
カテゴリー：タイヤチェンジャー
品名：安全自動車 WING CZ22
22インチ対応のプレミアムモデルタイヤチェンジャー 乗用車向け
・先進のレバーレスQXシステム（オプション）は、低偏平、大口径など難易度の高いビード起こし作業がワンタッチで行えます
・リム径20/22インチに対応。選べる２レンジ
More from FINE PIECE (20)
バンザイ 水性塗料対応型塗装ブース アイリス・スーパープレミアム BB-SPI-G25（ガス式）/BB-SPI-O25（灯油式） BANZAI
バンザイ 水性塗料対応型塗装ブース アイリス・スーパープレミアム BB-SPI-G25（ガス式）/BB-SPI-O25（灯油式） BANZAI
Recently uploaded
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定制【微信:bwp0011】《(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
学校原件一模一样【微信：741003700 】《(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
咨询办理【(UniSA毕业证书)南澳大学毕业证】【176555708微信号】未毕业成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Dahua Security Camera System Guide esetia
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
一比一原版(UMich毕业证)密歇根大学|安娜堡分校毕业证如何办理
UMich毕业证成绩单【微信95270640】（密歇根大学|安娜堡分校毕业证成绩单本科学历）Q微信95270640(补办UMich学位文凭证书)密歇根大学|安娜堡分校留信网学历认证怎么办理密歇根大学|安娜堡分校毕业证成绩单精仿本科学位证书硕士文凭证书认证Seneca College diplomaoffer,Transcript办理硕士学位证书造假密歇根大学|安娜堡分校假文凭学位证书制作UMich本科毕业证书硕士学位证书精仿密歇根大学|安娜堡分校学历认证成绩单修改制作，办理真实认证、留信认证、使馆公证、购买成绩单，购买假文凭，购买假学位证，制造假国外大学文凭、毕业公证、毕业证明书、录取通知书、Offer、在读证明、雅思托福成绩单、假文凭、假毕业证、请假条、国际驾照、网上存档可查！
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：密歇根大学|安娜堡分校密歇根大学|安娜堡分校毕业证假文凭全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。他们熟识起来还成了无话不谈的好朋友可惜快乐的时光总是太短太匆忙有一次当他们在楼下捉迷藏时一根长竹竿居然穿越安全网从高空砸下不偏不倚重重地砸在小伙伴阿新稚嫩的肩上父亲再也不让山娃上工地玩了有一天因为过于思念小伙伴山娃还偷偷地跑到工地上去找去唤无奈小伙伴们全不知去向当山娃折好只纸鹤让父亲转交阿新时父亲哽咽了摆摆手说阿新早回老家疗伤去了当山娃追问缘何不留在城里疗伤时父亲沉默了好久才幽幽地说城里开支大没不
Recently uploaded (18)
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Fdm star4 english
- 1. Produced by Drill Bit 8mm / 10mm Hole Diameter by the new shape and polishing technology. made possible by our original coating technology. Polish with the Star4 Drillfor Ultra High-Strength Steel Sheets of 1,500MPa Unparalleled Cutting Power Overwhelming Durability Various types can be made to order. Rebuilding is possible.
- 2. Binder phase Cobalt and additives Ultra-high- phase tungsten carbide The latest spot cutter with the world's most advanced polishing and coating technology. Made in Italy for the quality of the Star Four For Ultra High-Strength Steel Sheets of 1,500MPa