Exoskeleton Industry
•Download as PPTX, PDF•
0 likes•34 views
An exoskeleton revolution is set to make the bionic builder a reality. Because construction workers have started packing that kind of kit. In some cases the construction is a bit late for the party - body suits and add-on limbs are already supporting the military, helping to regroup with spinal cord injuries. Link - http://exoskeleton360.com/index.php/category/exoskeleton-revolution/
Report
Share
Report
Share
Recommended
exoskeleton industry in us
Exoskeleton Industry in US - The exoskeleton technology is one of the most important Safety guards for the body, with a rigid and resistant set of components that fill functional roles for user safety and support.
Link - http://exoskeleton360.com/
Butler_0916
This summary provides the key details about an experiment conducted to test the effectiveness of an exoskeleton device.
1) The experiment tested an exoskeleton device, called a personal ergonomic device (PED), on welders and painters at a manufacturing facility to see if it reduced fatigue and increased productivity.
2) The experiment aimed to test the hypothesis that using the exoskeleton device would increase productivity and quality of tasks by reducing operator fatigue and soreness.
3) The results of the experiment and effectiveness of the exoskeleton device were evaluated based on prior studies that examined fatigue in welders' muscles from overhead work and tests for measuring functional performance and fatigue in patients
Technology in sport
Technology in sports aims to achieve ultimate human performance and facilitate breaking records through faster times and recovery from injuries. However, technological advancements make comparing performances to history difficult, as it is questionable whether athletes from the past could have achieved similar results with modern equipment and training techniques. In some sports, records have improved drastically with technology, while in others records have remained similar over time.
Sports technology
The document discusses several new sports technologies that were introduced for the 2008 and 2012 Olympics, including the Speedo LZR Racer swimsuit, Adidas AdiStar rowing shoes, Doppler Lidar for sailing, the Morini CM 162 EI air pistol, Nike's Precool cooling vest, and the Gill Athletics OTE composite javelin. Each technology is described as providing athletes a competitive advantage through improved hydrodynamics, stability, wind detection, trigger smoothness, core body cooling, or javelin design.
Graphite may prevent complications caused by the device
Among the symptoms of flawed hip devices are pain on the hip area, pain on the thigh or groin area, pain while walking, pain when rising from a seated position, pain bearing weight and swelling.
Legal observers say that the DePuy hip replacement lawsuit should be a learning example to other manufacturing companies to ensure safety of their products. For more inputs just visit here at this webiste: www.depuysettlements.com
Technology in Sport 2014
Advances in sports technology over the last few years include Hawkeye systems in tennis and cricket to review line calls, specialized equipment like carbon fiber bikes and hockey sticks, and technology like electronic sensors in mouthguards to detect concussions. While this technology aims to increase speed, competition, and safety, it may disadvantage those without access to the latest innovations or change the traditional nature of sports. New swimsuits generating controversy for potentially aiding performances more than athlete ability alone. Coaches now analyze video to provide tactical insights, while officials rely on technology for support, but it also brings risks of overuse.
Technology in sports
The document discusses various technologies that have improved several sports, including tennis using computer tracking systems, pole vaulting evolving from wooden to fiberglass poles, swimming utilizing drag-reducing swimsuits, hockey with synthetic goalie padding, and football helmets improving from leather to advanced designs. Basketball has seen balls transition from leather to micro-fiber composites. The document concludes that technology will continue advancing sports and that people should learn to use current technology to prepare for future innovations.
Introduction to Ergonomics by OSHA
This document is a presentation on ergonomics for a 10-hour general industry training. It introduces musculoskeletal disorders (MSDs) and their risk factors. It then discusses various ergonomic control methods that can be implemented to reduce work-related MSDs, including engineering controls, proper work practices, personal protective equipment, and job hazard analysis. Specific examples are provided for how to address issues like awkward postures, repetitive motions, forceful exertions, vibration exposures, and heavy lifting. The goal is to help optimize human well-being and performance in the workplace.
Recommended
exoskeleton industry in us
Exoskeleton Industry in US - The exoskeleton technology is one of the most important Safety guards for the body, with a rigid and resistant set of components that fill functional roles for user safety and support.
Link - http://exoskeleton360.com/
Butler_0916
This summary provides the key details about an experiment conducted to test the effectiveness of an exoskeleton device.
1) The experiment tested an exoskeleton device, called a personal ergonomic device (PED), on welders and painters at a manufacturing facility to see if it reduced fatigue and increased productivity.
2) The experiment aimed to test the hypothesis that using the exoskeleton device would increase productivity and quality of tasks by reducing operator fatigue and soreness.
3) The results of the experiment and effectiveness of the exoskeleton device were evaluated based on prior studies that examined fatigue in welders' muscles from overhead work and tests for measuring functional performance and fatigue in patients
Technology in sport
Technology in sports aims to achieve ultimate human performance and facilitate breaking records through faster times and recovery from injuries. However, technological advancements make comparing performances to history difficult, as it is questionable whether athletes from the past could have achieved similar results with modern equipment and training techniques. In some sports, records have improved drastically with technology, while in others records have remained similar over time.
Sports technology
The document discusses several new sports technologies that were introduced for the 2008 and 2012 Olympics, including the Speedo LZR Racer swimsuit, Adidas AdiStar rowing shoes, Doppler Lidar for sailing, the Morini CM 162 EI air pistol, Nike's Precool cooling vest, and the Gill Athletics OTE composite javelin. Each technology is described as providing athletes a competitive advantage through improved hydrodynamics, stability, wind detection, trigger smoothness, core body cooling, or javelin design.
Graphite may prevent complications caused by the device
Among the symptoms of flawed hip devices are pain on the hip area, pain on the thigh or groin area, pain while walking, pain when rising from a seated position, pain bearing weight and swelling.
Legal observers say that the DePuy hip replacement lawsuit should be a learning example to other manufacturing companies to ensure safety of their products. For more inputs just visit here at this webiste: www.depuysettlements.com
Technology in Sport 2014
Advances in sports technology over the last few years include Hawkeye systems in tennis and cricket to review line calls, specialized equipment like carbon fiber bikes and hockey sticks, and technology like electronic sensors in mouthguards to detect concussions. While this technology aims to increase speed, competition, and safety, it may disadvantage those without access to the latest innovations or change the traditional nature of sports. New swimsuits generating controversy for potentially aiding performances more than athlete ability alone. Coaches now analyze video to provide tactical insights, while officials rely on technology for support, but it also brings risks of overuse.
Technology in sports
The document discusses various technologies that have improved several sports, including tennis using computer tracking systems, pole vaulting evolving from wooden to fiberglass poles, swimming utilizing drag-reducing swimsuits, hockey with synthetic goalie padding, and football helmets improving from leather to advanced designs. Basketball has seen balls transition from leather to micro-fiber composites. The document concludes that technology will continue advancing sports and that people should learn to use current technology to prepare for future innovations.
Introduction to Ergonomics by OSHA
This document is a presentation on ergonomics for a 10-hour general industry training. It introduces musculoskeletal disorders (MSDs) and their risk factors. It then discusses various ergonomic control methods that can be implemented to reduce work-related MSDs, including engineering controls, proper work practices, personal protective equipment, and job hazard analysis. Specific examples are provided for how to address issues like awkward postures, repetitive motions, forceful exertions, vibration exposures, and heavy lifting. The goal is to help optimize human well-being and performance in the workplace.
POWERCORE XL & THE PATRIOTS
Bob Beeten, director of the U.S. Olympic Sports Medicine & Research Center for 23 years, recommends the POWERCORE XL 1000 strength training equipment after authorizing its use at the Center, saying it is the one device he would recommend out of all the strength training and sports medicine equipment in the world. Former New England Patriots player Rodney Harrison also recommends the POWERCORE XL, saying using it improved his strength, flexibility, power, and reduced his lower back pain, and any player wanting a competitive edge should train on it.
Senior project paper
This document discusses athletic injuries in softball and ways to prevent them. It notes that 60% of sports injuries occur during practice. It describes the three energy systems (speed, speed endurance, and endurance) and how strengthening each can improve agility and decrease injury risk. Common softball injuries like knee injuries and concussions are examined. The importance of proper warmups, nutrition, strength training, and rest in injury prevention is emphasized. Physical therapy methods for treating injuries like acupuncture and electric shocks are also outlined.
OrthoXel Apex Tibial Nailing System Summary
Overview of new orthopaedic trauma intramedullary nailing sytem with unique micromotion locking from OrthoXel an innovative new company in the orthopaedic space. Visit www.orthoxel.net for more information or to contact us.
Trends & technologies in sports
1) The document discusses trends and technologies in sports, with a focus on their use in cricket.
2) It provides background on sports in general and how technology has benefited areas like training, tactics, and impartial decision making.
3) The document then examines various technologies that have been applied in cricket, such as Hawk-Eye, snickometer, and the Decision Review System to aid umpiring.
The role of technology in sporting performance
The lecture answers the questions of how much effect does engineering technology have on sport, is technology only used to increase performance and what are the "new technologies" being introduced. Courtesy of Prof Claire Davies, School of Metallurgy and Materials, University of Birmingham.
I101 Group Project
This document discusses concussions in football and potential solutions. It presents a scenario where a football player has to decide whether to continue playing with a headache. It then provides research showing the high rate of concussions in football, with over 300 reported in the NFL in 2012-2013. Potential solutions discussed include new mouth guards that can monitor concussions, helmets designed based on brain simulations and pig brain testing, and an app to notify trainers of dangerous hits.
Ergonomics
This document discusses ergonomics in the workplace in Pakistan. It introduces ergonomics and common musculoskeletal disorders. It then analyzes several postures in a motorcycle manufacturing plant using the Strain Index assessment tool. Several postures were found to pose risks and hazards. The document concludes by proposing an ergonomics awareness program to address issues through training, prevention, and medical management.
Ergonomics
Ergonomics is defined as the science related to designing equipment and tasks to maximize productivity and reduce user fatigue and stress. The field has its origins in the 19th century and gained prominence due to high accident rates from poorly designed cockpits during World War I. Ergonomic principles are now commonly applied in workplace design to reduce musculoskeletal injuries like carpal tunnel syndrome. Benefits of ergonomics include increased employee comfort, satisfaction, and productivity as well as lower health care costs and improved morale for employers.
ergonomics, ICM, MMC, CHENNAI
Ergonomics aims to optimize human well-being and system performance through understanding interactions between humans and other elements. Poor ergonomic design can result in discomfort, fatigue, injuries and reduced productivity. Key ergonomic considerations include anthropometry, biomechanics, muscular work, and postures. Checklists and standardization help assess ergonomic issues to improve workplace and job design.
Robert wearable robots
Wearable robots, also known as exoskeletons, are being developed to assist humans by enhancing physical strength and mobility for applications in industries like healthcare, military, and manual labor. Early exoskeleton prototypes date back to the 1960s but the technology is rapidly advancing, with current prototypes helping people with disabilities walk and assisting soldiers in carrying heavy loads for long periods of time without fatigue. If development continues at its current pace, exoskeletons may start assisting medical professionals, laborers, and soldiers within the next 5 to 10 years.
Wearables para la salud y prevención de riesgos laborales
GOGOA Mobility Robots S.L. is a Spanish company that designs, develops, and manufactures exoskeletons for clinical and industrial applications. Exoskeletons are wearable robotic devices that enhance human capabilities by supporting and protecting the body. GOGOA's medical exoskeleton, HANK, aids in gait rehabilitation for patients with injuries or illnesses, while their industrial exoskeletons, BESK and ALDAK, help workers perform heavy lifting and reduce fatigue and injury risks on the job. The global exoskeleton market is projected to grow rapidly over the next decade, especially in medical, military, and industrial sectors.
[Skolkovo Robotics 2015 Day 1] Kaplan A. Робототехника в нейрореабилитации
This document discusses the use of robotics in neurorehabilitation. It notes that millions of people could benefit from robotic assistance or rehabilitation due to conditions like stroke, spinal cord injury, multiple sclerosis and cerebral palsy. The field of robotics in rehabilitation began in the 1960s with powered exoskeleton devices. More recently, assistive robots have been developed for tasks like mobility assistance, motor training and rehabilitation. Both noninvasive and invasive brain-computer interfaces have also been explored to control prosthetics and robots using neural signals. Going forward, cooperative control of robots using signals from both the brain and muscles is seen as an important area of development.
bionic
In New Mexico, researchers led by Mohsen Shahinpoor at the Artificial Muscle Research Institute are developing new materials called Ionic Polymer Metal Composites (IPMCs) that function like human muscle. IPMCs contract and expand in response to electricity, mimicking how real muscles move when electrical impulses are transmitted through the nervous system. Shahinpoor envisions using these artificial muscles to create exoskeletons that could help people with disabilities by translating electrical signals from the brain into motion, potentially replacing wheelchairs.
Design And Analysis of Different Artificial Human Hip Stems Based on Fenestra...
This document discusses the design and analysis of different artificial human hip stems based on fenestrations using PEEK material. It analyzes three different types of hip stems - one without fenestration and two with different fenestration designs. The stems were modeled in SOLIDWORKS and analyzed for stress-strain distribution and deformation under various loading conditions using ANSYS Workbench. PEEK and Ti-6Al-4V materials were evaluated to determine the best design and material for withstanding stresses on the hip stem. The document provides background on hip replacement surgery, total hip replacement procedures, and reviews past literature on hip implant designs, materials used, and finite element analysis of hip implants.
Tissue engineering
The goal of tissue engineering is to assemble functional constructs that restore, maintain, or improve damaged tissues or whole organs.....
Process - Tissue engineering often involves the use of cells placed on tissue scaffolds in the formation of new viable tissue for a medical purpose but is not limited to applications involving cells and tissue scaffolds.....
Benefits -A distinctive feature of tissue engineering is to regenerate patient's own tissues and organs that are entirely free of poor biocompatibility and low bio-functionality as well as severe immune rejection. Owing to the outstanding advantages, tissue engineering is often considered as an ultimately ideal medical treatment....
Example - Today there are several examples of tissue engineering in clinical use, e.g. skin, cartilage, bone, heart valves and bladder. There are many more examples, which still are at the research and animal experiment levels, like artificial liver, pancreas and blood vessels.
Bio materials
The document discusses biomaterials, which are materials used in medical devices that interact with biological systems. Biomaterials are intended to replace or augment damaged organs, tissues, or vessels. Common biomaterial applications include joint replacements, dental implants, heart valves, blood vessel grafts, and intraocular lenses. The development of biomaterials involves identifying needs, designing devices, testing materials, fabricating devices, sterilization, packaging, testing devices, and clinical use. Key considerations for biomaterials include biocompatibility, toxicology, and mechanical performance requirements.
Ergonomics the work natural law uk boys (5)
Ergonomics is defined as the science of designing workplaces to fit human physical dimensions and prevent injuries while increasing comfort and productivity. The word was coined in 1857 and comes from Greek words meaning "work" and "natural laws." There are five aspects of ergonomics: safety, comfort, ease of use, productivity, and aesthetics. Examples of ergonomic design include office furniture that maintains natural body positions and dental practices focused on patient safety. Benefits include increased comfort, decreased stress, time savings, improved morale and productivity. Future directions may include more automation, energy management visualization tools, and integration into quality management and health standards. The conclusion emphasizes that work injuries are preventable through ongoing risk assessment.
Prosthetic devices
The slide gives a general idea about the prosthetic devices - types, varieties and their uses in India and abroad.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
More Related Content
What's hot
POWERCORE XL & THE PATRIOTS
Bob Beeten, director of the U.S. Olympic Sports Medicine & Research Center for 23 years, recommends the POWERCORE XL 1000 strength training equipment after authorizing its use at the Center, saying it is the one device he would recommend out of all the strength training and sports medicine equipment in the world. Former New England Patriots player Rodney Harrison also recommends the POWERCORE XL, saying using it improved his strength, flexibility, power, and reduced his lower back pain, and any player wanting a competitive edge should train on it.
Senior project paper
This document discusses athletic injuries in softball and ways to prevent them. It notes that 60% of sports injuries occur during practice. It describes the three energy systems (speed, speed endurance, and endurance) and how strengthening each can improve agility and decrease injury risk. Common softball injuries like knee injuries and concussions are examined. The importance of proper warmups, nutrition, strength training, and rest in injury prevention is emphasized. Physical therapy methods for treating injuries like acupuncture and electric shocks are also outlined.
OrthoXel Apex Tibial Nailing System Summary
Overview of new orthopaedic trauma intramedullary nailing sytem with unique micromotion locking from OrthoXel an innovative new company in the orthopaedic space. Visit www.orthoxel.net for more information or to contact us.
Trends & technologies in sports
1) The document discusses trends and technologies in sports, with a focus on their use in cricket.
2) It provides background on sports in general and how technology has benefited areas like training, tactics, and impartial decision making.
3) The document then examines various technologies that have been applied in cricket, such as Hawk-Eye, snickometer, and the Decision Review System to aid umpiring.
The role of technology in sporting performance
The lecture answers the questions of how much effect does engineering technology have on sport, is technology only used to increase performance and what are the "new technologies" being introduced. Courtesy of Prof Claire Davies, School of Metallurgy and Materials, University of Birmingham.
I101 Group Project
This document discusses concussions in football and potential solutions. It presents a scenario where a football player has to decide whether to continue playing with a headache. It then provides research showing the high rate of concussions in football, with over 300 reported in the NFL in 2012-2013. Potential solutions discussed include new mouth guards that can monitor concussions, helmets designed based on brain simulations and pig brain testing, and an app to notify trainers of dangerous hits.
Ergonomics
This document discusses ergonomics in the workplace in Pakistan. It introduces ergonomics and common musculoskeletal disorders. It then analyzes several postures in a motorcycle manufacturing plant using the Strain Index assessment tool. Several postures were found to pose risks and hazards. The document concludes by proposing an ergonomics awareness program to address issues through training, prevention, and medical management.
Ergonomics
Ergonomics is defined as the science related to designing equipment and tasks to maximize productivity and reduce user fatigue and stress. The field has its origins in the 19th century and gained prominence due to high accident rates from poorly designed cockpits during World War I. Ergonomic principles are now commonly applied in workplace design to reduce musculoskeletal injuries like carpal tunnel syndrome. Benefits of ergonomics include increased employee comfort, satisfaction, and productivity as well as lower health care costs and improved morale for employers.
ergonomics, ICM, MMC, CHENNAI
Ergonomics aims to optimize human well-being and system performance through understanding interactions between humans and other elements. Poor ergonomic design can result in discomfort, fatigue, injuries and reduced productivity. Key ergonomic considerations include anthropometry, biomechanics, muscular work, and postures. Checklists and standardization help assess ergonomic issues to improve workplace and job design.
What's hot (9)
Similar to Exoskeleton Industry
Robert wearable robots
Wearable robots, also known as exoskeletons, are being developed to assist humans by enhancing physical strength and mobility for applications in industries like healthcare, military, and manual labor. Early exoskeleton prototypes date back to the 1960s but the technology is rapidly advancing, with current prototypes helping people with disabilities walk and assisting soldiers in carrying heavy loads for long periods of time without fatigue. If development continues at its current pace, exoskeletons may start assisting medical professionals, laborers, and soldiers within the next 5 to 10 years.
Wearables para la salud y prevención de riesgos laborales
GOGOA Mobility Robots S.L. is a Spanish company that designs, develops, and manufactures exoskeletons for clinical and industrial applications. Exoskeletons are wearable robotic devices that enhance human capabilities by supporting and protecting the body. GOGOA's medical exoskeleton, HANK, aids in gait rehabilitation for patients with injuries or illnesses, while their industrial exoskeletons, BESK and ALDAK, help workers perform heavy lifting and reduce fatigue and injury risks on the job. The global exoskeleton market is projected to grow rapidly over the next decade, especially in medical, military, and industrial sectors.
[Skolkovo Robotics 2015 Day 1] Kaplan A. Робототехника в нейрореабилитации
This document discusses the use of robotics in neurorehabilitation. It notes that millions of people could benefit from robotic assistance or rehabilitation due to conditions like stroke, spinal cord injury, multiple sclerosis and cerebral palsy. The field of robotics in rehabilitation began in the 1960s with powered exoskeleton devices. More recently, assistive robots have been developed for tasks like mobility assistance, motor training and rehabilitation. Both noninvasive and invasive brain-computer interfaces have also been explored to control prosthetics and robots using neural signals. Going forward, cooperative control of robots using signals from both the brain and muscles is seen as an important area of development.
bionic
In New Mexico, researchers led by Mohsen Shahinpoor at the Artificial Muscle Research Institute are developing new materials called Ionic Polymer Metal Composites (IPMCs) that function like human muscle. IPMCs contract and expand in response to electricity, mimicking how real muscles move when electrical impulses are transmitted through the nervous system. Shahinpoor envisions using these artificial muscles to create exoskeletons that could help people with disabilities by translating electrical signals from the brain into motion, potentially replacing wheelchairs.
Design And Analysis of Different Artificial Human Hip Stems Based on Fenestra...
This document discusses the design and analysis of different artificial human hip stems based on fenestrations using PEEK material. It analyzes three different types of hip stems - one without fenestration and two with different fenestration designs. The stems were modeled in SOLIDWORKS and analyzed for stress-strain distribution and deformation under various loading conditions using ANSYS Workbench. PEEK and Ti-6Al-4V materials were evaluated to determine the best design and material for withstanding stresses on the hip stem. The document provides background on hip replacement surgery, total hip replacement procedures, and reviews past literature on hip implant designs, materials used, and finite element analysis of hip implants.
Tissue engineering
The goal of tissue engineering is to assemble functional constructs that restore, maintain, or improve damaged tissues or whole organs.....
Process - Tissue engineering often involves the use of cells placed on tissue scaffolds in the formation of new viable tissue for a medical purpose but is not limited to applications involving cells and tissue scaffolds.....
Benefits -A distinctive feature of tissue engineering is to regenerate patient's own tissues and organs that are entirely free of poor biocompatibility and low bio-functionality as well as severe immune rejection. Owing to the outstanding advantages, tissue engineering is often considered as an ultimately ideal medical treatment....
Example - Today there are several examples of tissue engineering in clinical use, e.g. skin, cartilage, bone, heart valves and bladder. There are many more examples, which still are at the research and animal experiment levels, like artificial liver, pancreas and blood vessels.
Bio materials
The document discusses biomaterials, which are materials used in medical devices that interact with biological systems. Biomaterials are intended to replace or augment damaged organs, tissues, or vessels. Common biomaterial applications include joint replacements, dental implants, heart valves, blood vessel grafts, and intraocular lenses. The development of biomaterials involves identifying needs, designing devices, testing materials, fabricating devices, sterilization, packaging, testing devices, and clinical use. Key considerations for biomaterials include biocompatibility, toxicology, and mechanical performance requirements.
Ergonomics the work natural law uk boys (5)
Ergonomics is defined as the science of designing workplaces to fit human physical dimensions and prevent injuries while increasing comfort and productivity. The word was coined in 1857 and comes from Greek words meaning "work" and "natural laws." There are five aspects of ergonomics: safety, comfort, ease of use, productivity, and aesthetics. Examples of ergonomic design include office furniture that maintains natural body positions and dental practices focused on patient safety. Benefits include increased comfort, decreased stress, time savings, improved morale and productivity. Future directions may include more automation, energy management visualization tools, and integration into quality management and health standards. The conclusion emphasizes that work injuries are preventable through ongoing risk assessment.
Prosthetic devices
The slide gives a general idea about the prosthetic devices - types, varieties and their uses in India and abroad.
Similar to Exoskeleton Industry (9)
Wearables para la salud y prevención de riesgos laborales
Wearables para la salud y prevención de riesgos laborales
[Skolkovo Robotics 2015 Day 1] Kaplan A. Робототехника в нейрореабилитации
[Skolkovo Robotics 2015 Day 1] Kaplan A. Робототехника в нейрореабилитации
Design And Analysis of Different Artificial Human Hip Stems Based on Fenestra...
Design And Analysis of Different Artificial Human Hip Stems Based on Fenestra...
Recently uploaded
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Recently uploaded (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Exoskeleton Industry
- 1. Exoskeletons An Overview | Exoskeleton Industry Exoskeleton products are not relatively new to be introduced in the market, it’s been over a hundred years since the first exoskeleton like product was developed in 1890 by a Russian engineer Nicholas Yagn, an apparatus for assisting movements. Exoskeletons were not something totally unheard of though, many animals and insects naturally have exoskeletons for their own biological purposes like turtles, snails, etc. An exoskeleton usually pertains to an external body covering feature facilitating a certain biological process thereby.
- 2. Occupational Exoskeleton | Occupational Exoskeleton For Sale Occupational Exoskeleton is one of the best wearable robotic devices and prevents work-related musculoskeletal disorders in the future workplace. Exoskeleton products have a variety of applications not just limited to medical healthcare or military purposes. Number of widely recognized organisations are agnizing the applications of exoskeleton products in a working environment to improve their workforce productivity by reducing physical work time strain upon an employee’s body and health and thereby improving their morale and capacity to perform quality work.
- 3. Commercial Exoskeletons For Sale | Commercial Exoskeletons Commercial exoskeletons are wearable devices, which can be used to support strength and endurance, and to protect soldiers from stress injury. The exoskeleton product industry is more or less a little more than five years old into its making and there are quite a number of exoskeleton products making their way into the market. There are a number of applications for these products in a variety of industries in the business world like medical and healthcare, military and defense, production and manufacturing, etc.
- 4. Industrial Exoskeletons For Sale | Exoskeleton of Human Body Industrial Exoskeleton is a mechanical device worn by workers, which refers to the structure of the operator's limbs, joints, and musclesThe applications for exoskeleton products for an industrial setup are unprecedentedly huge. As a matter of fact, the industrial exoskeleton market is the second largest exoskeleton product market after the medical healthcare market. There are a number of exoskeleton devices.
- 5. Adrees: 6337, North Polaski Road, Chicago, Illinois, 60646 Phone: +1-3124284402 Email: exoskeleton360@gmail.com