Excavation
•
0 likes•146 views
The document provides information on excavation costs for three different excavation jobs: 1) Excavation to reduce level involving a 10m2 x 1m deep trench costing RM71.28/m3. 2) Excavation of pits for pad foundations and column stumps of size 0.45m x 0.45m x 2.1m deep, costing RM70.36/m3. 3) Excavation of a trench for a ground beam of size 66m x 0.25m x 0.55m deep, costing RM15.08/m3.
Report
Share
Report
Share
Download to read offline
Recommended
Assignment ceiling finishes
The document estimates the costs of installing a plasterboard ceiling and painting a plaster surface.
For the ceiling: The material cost is estimated at RM17.14 per square meter including plasterboard, battens, and 10% wastage. Labour costs RM24.38 per square meter. The total estimated cost is RM47.75 per square meter including 10% profit and 5% overhead.
For painting: The material cost is estimated at RM285.96 per 100 square meters including undercoat, two finishing coats, and 10% wastage. Labour costs RM148 per 100 square meters. The total estimated cost is RM564.83 per 100 square meters or RM5.65 per square meter including 20%
Int. ceiling finishes
The document provides a cost estimate for plasterboard ceiling and painting internal ceilings. It estimates the material and labor costs to install 12.5mm thick fibrous plaster ceiling at RM32.10/m2 including plasterboard, battens, labor for installation, profit, and overhead. It also estimates the material and labor costs to apply undercoat and two finishing coats of paint at RM3.18/m2 including paint, labor for application, tools, profit, and overhead. The total cost per square meter for ceiling finishes is estimated to be RM32.10/m2 for installation and RM3.18/m2 for painting.
Excavation 2014a-Lecture2
This document discusses excavation work levels and methods of measurement according to clauses in SMM2. It outlines the objectives of learning various excavation levels, relating excavation works to SMM2 clauses, and learning measurement methods per clause D.10. Platform and completed levels are shown in diagrams. The importance of a footing schedule table that provides dimensions like length, width, height and excavation depth for different footing types is explained. Steps for starting excavation work by studying drawings and determining dimensions from drawings are described. Examples of describing excavation work according to clauses D.10 and D.12 for oversite excavation to reduce level and excavation pits for footings are provided.
Excavation 2014a-Lecture3
1. The document discusses excavation work for building foundations, including determining the type and depth of excavation needed and which measurement clauses to apply.
2. Excavation work includes measuring the volume of soil removed for footings and pile caps, as well as disposing of surplus soil according to clauses for on-site or off-site removal.
3. Calculating excavation work requires identifying the foundation type from drawings, finding the relevant clause, and measuring the excavation depth, length, and width to determine the excavated material volume.
Quantity surveying drawing FNBE 2014
This document provides an introduction to the role of a Quantity Surveyor (QS). It discusses that a QS calculates materials needed, manages construction costs, and works in private practice, for local authorities or contractors. A QS applies building economics at the planning stage, prepares bills of quantities from plans, analyzes tenders, and provides cost consulting. They are involved at various construction stages from estimating budgets to valuations. The document also discusses tenders, tender drawings, bills of quantities, construction drawings, and common building materials.
Estimating
The document provides cost calculations for various construction materials including concrete, reinforcement bars, steel fabric, and hardcore. It calculates the material cost, labor cost, and profit margin to determine the total cost per unit of each material. The costs are calculated based on parameters such as material price, wastage percentage, labor rates, and time required for installation. The final costs provided are the amounts chargeable per cubic meter or square meter of each construction material.
The productivity of lhd in underground coal mines
This document discusses the productivity of LHD machines in underground coal mines. It provides background on coal mining in India and describes the types of underground mining technologies used. Side Discharge Loaders (SDL) and Load Haul Dump (LHD) machines are discussed as examples of intermediate mining technology. The document then calculates the productivity of LHD machines in different coal seams and faces based on machine parameters, haul distances, and cycle times measured from observational data. Productivity is found to range from 103-452 tonnes per day depending on the specific mining conditions and face layout. Longer haul distances and steeper gradients are shown to reduce productivity.
Seminar 2 - Calculation Question (Excavation)
This document provides data to calculate the cost of excavating and backfilling 4 pits for pad footings and columns. It includes hourly excavation and backfill rates for different types of excavation work in sand, daily labor rates, and adjustments needed for sand excavation, compaction, profit, and overhead to determine the total cost and unit rate per cubic meter. Skilled labor is required for excavation taking longer than 3 hours per cubic meter.
Recommended
Assignment ceiling finishes
The document estimates the costs of installing a plasterboard ceiling and painting a plaster surface.
For the ceiling: The material cost is estimated at RM17.14 per square meter including plasterboard, battens, and 10% wastage. Labour costs RM24.38 per square meter. The total estimated cost is RM47.75 per square meter including 10% profit and 5% overhead.
For painting: The material cost is estimated at RM285.96 per 100 square meters including undercoat, two finishing coats, and 10% wastage. Labour costs RM148 per 100 square meters. The total estimated cost is RM564.83 per 100 square meters or RM5.65 per square meter including 20%
Int. ceiling finishes
The document provides a cost estimate for plasterboard ceiling and painting internal ceilings. It estimates the material and labor costs to install 12.5mm thick fibrous plaster ceiling at RM32.10/m2 including plasterboard, battens, labor for installation, profit, and overhead. It also estimates the material and labor costs to apply undercoat and two finishing coats of paint at RM3.18/m2 including paint, labor for application, tools, profit, and overhead. The total cost per square meter for ceiling finishes is estimated to be RM32.10/m2 for installation and RM3.18/m2 for painting.
Excavation 2014a-Lecture2
This document discusses excavation work levels and methods of measurement according to clauses in SMM2. It outlines the objectives of learning various excavation levels, relating excavation works to SMM2 clauses, and learning measurement methods per clause D.10. Platform and completed levels are shown in diagrams. The importance of a footing schedule table that provides dimensions like length, width, height and excavation depth for different footing types is explained. Steps for starting excavation work by studying drawings and determining dimensions from drawings are described. Examples of describing excavation work according to clauses D.10 and D.12 for oversite excavation to reduce level and excavation pits for footings are provided.
Excavation 2014a-Lecture3
1. The document discusses excavation work for building foundations, including determining the type and depth of excavation needed and which measurement clauses to apply.
2. Excavation work includes measuring the volume of soil removed for footings and pile caps, as well as disposing of surplus soil according to clauses for on-site or off-site removal.
3. Calculating excavation work requires identifying the foundation type from drawings, finding the relevant clause, and measuring the excavation depth, length, and width to determine the excavated material volume.
Quantity surveying drawing FNBE 2014
This document provides an introduction to the role of a Quantity Surveyor (QS). It discusses that a QS calculates materials needed, manages construction costs, and works in private practice, for local authorities or contractors. A QS applies building economics at the planning stage, prepares bills of quantities from plans, analyzes tenders, and provides cost consulting. They are involved at various construction stages from estimating budgets to valuations. The document also discusses tenders, tender drawings, bills of quantities, construction drawings, and common building materials.
Estimating
The document provides cost calculations for various construction materials including concrete, reinforcement bars, steel fabric, and hardcore. It calculates the material cost, labor cost, and profit margin to determine the total cost per unit of each material. The costs are calculated based on parameters such as material price, wastage percentage, labor rates, and time required for installation. The final costs provided are the amounts chargeable per cubic meter or square meter of each construction material.
The productivity of lhd in underground coal mines
This document discusses the productivity of LHD machines in underground coal mines. It provides background on coal mining in India and describes the types of underground mining technologies used. Side Discharge Loaders (SDL) and Load Haul Dump (LHD) machines are discussed as examples of intermediate mining technology. The document then calculates the productivity of LHD machines in different coal seams and faces based on machine parameters, haul distances, and cycle times measured from observational data. Productivity is found to range from 103-452 tonnes per day depending on the specific mining conditions and face layout. Longer haul distances and steeper gradients are shown to reduce productivity.
Seminar 2 - Calculation Question (Excavation)
This document provides data to calculate the cost of excavating and backfilling 4 pits for pad footings and columns. It includes hourly excavation and backfill rates for different types of excavation work in sand, daily labor rates, and adjustments needed for sand excavation, compaction, profit, and overhead to determine the total cost and unit rate per cubic meter. Skilled labor is required for excavation taking longer than 3 hours per cubic meter.
Wblff (1)
The document provides cost estimates for various excavation and reinforcement works. It includes calculations for the material and labor costs to excavate soil of different depths for purposes like reducing ground level, constructing pad footings and trenches. Similarly, it estimates the material and labor costs for reinforcing works using mild steel and high tensile bars of various diameters. The rates are calculated based on quantities, time estimates, hourly labor costs and include overhead and profit margins.
Joint Operation Mining Plan (28 Ha) - PT Jagad Rayatama.pptx
This document provides a mining plan for a 28 hectare joint operation over the first month. It includes production targets and equipment requirements for overburden removal, ore getting and hauling, and barging of ore. The total monthly cost is estimated at Rp 3,094,759,233.50 (USD 220,000) including costs for equipment, fuel, labor, and support. The profit is estimated based on shipping 6 barges of nickel ore at a price of USD 17 per tonne of nickel content.
Appendix 11 analysis of rates - balsio shp phase ii - 28032014
The document provides a cost analysis for concrete work (M-10) for the surface works of the Balsio Hydro Electric Project. It includes calculations for the costs of materials, batching and mixing, transportation, placement and shuttering. The total prime cost per cubic meter of M-10 concrete is estimated to be Rs. 3422.161998 which includes costs for cement, sand, aggregates, batching, mixing, transportation by transit mixer, placement using a concrete pump, vibrating, cleaning and curing. Shuttering costs are estimated at Rs. 250 per cubic meter.
Productivity analysis of Burried/underground cable laying Activity
A brief on the productivity analysis done for the engaged contractors in a sector for electrical cable laying activity - which measures the work productivity and cost analysis as well.
By doing this we arrest the critical activity easily by engaging right contractor based on their work performance/productivity and able to finish the activity within given time frame.
Rate Analysis Site Meeting
The document presents a rate analysis for slip form shuttering used in construction. It details the various cost components that make up the total cost per square meter of shuttering, including:
1) The cost of yokes, trusses and form panels totaling Rs. 1,500,000.
2) The cost of jack rods totaling Rs. 413,000.
3) The cost of jacks, power packs and hydraulic equipment totaling Rs. 1,396,000 after depreciation.
4) Additional costs for timber, consumables, labor, and dismantling totaling Rs. 2,856,000.
The total cost of the shuttering was Rs. 4,443
Transport & digging capacity calculation
This document discusses the calculation of transport and digging capacity for open cast mines. It provides formulas and examples for determining the continuous and actual capacities of trucks and shovels based on factors like bucket size, fill factor, cycle times, and equipment availability. For a mine requiring annual production of 12.7 million tons, the calculations show that 8 trucks with 85-ton capacity and 2 shovels with 7.65-cubic meter buckets would be needed.
Ambuja Cements Ltd. Internship Project Presentation
Subharaj Chakraborty completed a summer internship project assessing mining operations at Ambuja Cements Ltd.'s Kashlog limestone mine. Key findings included the crusher operating below capacity and inconsistent dumper cycle times due to idling. Suggestions focused on minimizing idle time through optimizing dumper-excavator ratios and enforcing safety procedures like proper personal protective equipment usage and speed limits. The internship provided insights into improving mining efficiency and safety practices.
Pm group-compileddd
This document provides information about a proposed project to develop a three-story car park with a convenience store at Taylor's University Lakeside Campus. The project aims to address parking issues on campus and provide students with cheaper shopping options. If approved, the client will build the car park and 99 Speedmart franchise on land rented from the university for RM15,000 per month over 20 years. The development is expected to benefit students socially and financially, while complying with Malaysian education policies.
Activity id
The document outlines a construction project schedule with 16 activities including obtaining city and building permits, site work like excavation and piling, and structure work like foundations and concrete. The activities have assigned durations and indicate dependencies between tasks. For example, building permits takes 21 days and depends on obtaining city permits first. The schedule is to be completed after the project start date of May 19, 2017 while adhering to assumptions like working Saturdays and allowing concrete work on Sundays.
Pm project-control-compiled
Project control involves managing cost, time, and quality. This project prioritizes time and cost control given the building's nature. Various methods will be used to control time, including focusing on fast materials and analyzing worker productivity. Cost control will involve detailed planning, budgeting, and controlling by a specialized team. Quality control uses a six sigma approach to define standards and requirements, measure performance, analyze issues, improve processes, and continuously control quality through the DMAIC cycle. The goal is satisfying needs while meeting standards.
Final 2
This document is a student dissertation that examines the competencies of quantity surveying students in Malaysia's construction industry. Specifically, it investigates the expectations of employers regarding the competencies of new graduates and compares this to the educational framework provided by universities. The dissertation was submitted in fulfillment of a Bachelor's degree in Quantity Surveying at Taylor's University in Malaysia. It includes a literature review on competencies, employer expectations, and the Malaysian education system. The student conducted surveys of graduates and interviews with employers and lecturers to understand competency gaps. The research aims to establish solutions to conflicts between employer needs and the competencies developed through university education.
Law relating-to-payment
The document discusses laws relating to payment in construction contracts, including the nature and operation of interim and final payment certificates, the certification process, the certifier's role and responsibilities, and challenges that can be made to certificates. Interim certificates provide temporary finality and entitle contractors to immediate payment, while final certificates are intended to be the conclusive statement of any outstanding amounts due. Contractors have remedies such as arbitration if certificates are wrongfully withheld or issued.
Cl report final
This document provides an analysis and professional advice for Smart Builder Construction regarding issues that arose on a construction project. It analyzes the issues based on the FIDIC Red Book 1999 and the PAM Contract 2006. Key issues included delayed site handover, non-payment of certificates, design changes incurring extra costs, and disputes over testing and defects. Advice is provided on the contractor's responsibilities, payment conditions, contractual programming, and dispute resolution methods. The contractor is advised to claim interest on late payments under the FIDIC Red Book and consider statutory adjudication for faster resolution of non-payment issues.
Vm assignment - presentation slide (1)
1. The document reports on a value management case study conducted for Straits International School in Rawang, Selangor, Malaysia.
2. The study identified several issues with the school's design including noise pollution from sports activities, an unsuitable space for badminton, and duplicate functions for a playground and playroom.
3. Alternative solutions were proposed using techniques like fast diagrams, value trees, and creativity methods. An action plan was developed to address the issues and improve the design's value.
Vm compiled-edited (print)
Remove the playground area on the ground floor and increase the size of the playroom. Acoustic wall panels will be added to classrooms on the second floor to reduce noise pollution. The four badminton courts on the third floor will be changed to two tennis courts under a new roof structure to protect the playing surface from weather and allow play that is not impacted by wind. The changes were recommended to increase value by removing unnecessary spaces, improving the learning environment, and replacing a space with a more suitable outdoor activity.
De assignment-finalized-28112017
The document proposes developing a plot of land measuring 435,600 square feet into commercial and residential units. It outlines plans for 18 double-storey shop/office lots of 2,080 square feet each, accounting for 15% of the development area. It also details plans for 83 double-storey terrace houses of 1,650 square feet each, taking up 55% of the area, and distributed across 7 blocks. Finally, it proposes developing 64 low-cost houses of 1,200 square feet each, using 30% of the area spread over 5 blocks.
De assignment-finalized-28112017 6
The document analyzes the viability of a project based on its net present value (NPV). NPV is the difference between the present value of cash inflows and outflows of a project. The document shows the quarterly cash flows in a table for 12 years, calculating the net cash flow and discounted cash flow for each period using a 12% discount rate. It determines that the NPV of the project in 2013 is RM 8,429,105.25 and the NPV in 2010 is RM 11,842,285.98, indicating the project is profitable.
De assignment-finalized-28112017 5
This document provides a quarterly cash flow analysis for a development project from 2010 to 2017. It shows cash inflows from property sales projections and cash outflows for items like construction costs, land costs, financing costs, fees, and administrative expenses. For each quarter, it calculates the net cash flow, cumulative cash flow, and cumulative cash inflow and outflow. The total projected sales are RM60,961,770 and total cash outflow is RM44,656,657.56, resulting in a positive cumulative cash flow of RM16,305,112.44 by the end of 2017.
De assignment-finalized-28112017 4
This document provides a projected cash outflow schedule for a construction project from 2013 to 2016. It outlines the construction costs by item and month, showing the monthly and quarterly cash outflows. The total construction cost is $19,265,375 and will be paid in two moieties, with the second half paid in 2016. Retention amounts are deducted from the monthly outflows.
De assignment-finalized-28112017 3
The document outlines the projected cash flow for a property development project from 2013-2016. It is divided into three sections: cash inflow, cash outflow, and quarterly cashflow. The cash inflow section projects the monthly and quarterly sales percentages and amounts for different property types over several quarters. It also outlines the payment schedule for purchasers upon taking possession, with installments due at 8 months, 24 months, and upon receiving title documents. The total projected quarterly and annual cash inflows are provided.
De assignment-finalized-28112017 2
This section provides a financial appraisal of a proposed property development using the residue method of valuation. It details the gross development value, land and construction costs, administrative costs including fees and financing, and contingencies to calculate the total gross development cost. The gross development profit is then determined by taking the difference between the gross development value and cost, which in this case is RM16,305,112.44 or 29.94% of the gross development value.
Research proposal draft v3
This document is a research proposal submitted by a student named Liew Yong Sheng exploring the competencies of quantity surveying students in Malaysia's construction industry. The proposal includes an introduction providing background on quantity surveyors and defining their competencies. It identifies the problem that universities may not be adequately preparing students for the skills employers require. The research questions whether students' competencies match employer expectations. The objectives are to identify employer expectations, understand how universities develop competencies, and establish solutions to differences. The research design involves questionnaires, interviews and literature review. The findings could help reduce graduate unemployment by better aligning education with industry needs.
More Related Content
Similar to Excavation
Wblff (1)
The document provides cost estimates for various excavation and reinforcement works. It includes calculations for the material and labor costs to excavate soil of different depths for purposes like reducing ground level, constructing pad footings and trenches. Similarly, it estimates the material and labor costs for reinforcing works using mild steel and high tensile bars of various diameters. The rates are calculated based on quantities, time estimates, hourly labor costs and include overhead and profit margins.
Joint Operation Mining Plan (28 Ha) - PT Jagad Rayatama.pptx
This document provides a mining plan for a 28 hectare joint operation over the first month. It includes production targets and equipment requirements for overburden removal, ore getting and hauling, and barging of ore. The total monthly cost is estimated at Rp 3,094,759,233.50 (USD 220,000) including costs for equipment, fuel, labor, and support. The profit is estimated based on shipping 6 barges of nickel ore at a price of USD 17 per tonne of nickel content.
Appendix 11 analysis of rates - balsio shp phase ii - 28032014
The document provides a cost analysis for concrete work (M-10) for the surface works of the Balsio Hydro Electric Project. It includes calculations for the costs of materials, batching and mixing, transportation, placement and shuttering. The total prime cost per cubic meter of M-10 concrete is estimated to be Rs. 3422.161998 which includes costs for cement, sand, aggregates, batching, mixing, transportation by transit mixer, placement using a concrete pump, vibrating, cleaning and curing. Shuttering costs are estimated at Rs. 250 per cubic meter.
Productivity analysis of Burried/underground cable laying Activity
A brief on the productivity analysis done for the engaged contractors in a sector for electrical cable laying activity - which measures the work productivity and cost analysis as well.
By doing this we arrest the critical activity easily by engaging right contractor based on their work performance/productivity and able to finish the activity within given time frame.
Rate Analysis Site Meeting
The document presents a rate analysis for slip form shuttering used in construction. It details the various cost components that make up the total cost per square meter of shuttering, including:
1) The cost of yokes, trusses and form panels totaling Rs. 1,500,000.
2) The cost of jack rods totaling Rs. 413,000.
3) The cost of jacks, power packs and hydraulic equipment totaling Rs. 1,396,000 after depreciation.
4) Additional costs for timber, consumables, labor, and dismantling totaling Rs. 2,856,000.
The total cost of the shuttering was Rs. 4,443
Transport & digging capacity calculation
This document discusses the calculation of transport and digging capacity for open cast mines. It provides formulas and examples for determining the continuous and actual capacities of trucks and shovels based on factors like bucket size, fill factor, cycle times, and equipment availability. For a mine requiring annual production of 12.7 million tons, the calculations show that 8 trucks with 85-ton capacity and 2 shovels with 7.65-cubic meter buckets would be needed.
Ambuja Cements Ltd. Internship Project Presentation
Subharaj Chakraborty completed a summer internship project assessing mining operations at Ambuja Cements Ltd.'s Kashlog limestone mine. Key findings included the crusher operating below capacity and inconsistent dumper cycle times due to idling. Suggestions focused on minimizing idle time through optimizing dumper-excavator ratios and enforcing safety procedures like proper personal protective equipment usage and speed limits. The internship provided insights into improving mining efficiency and safety practices.
Similar to Excavation (7)
Joint Operation Mining Plan (28 Ha) - PT Jagad Rayatama.pptx
Joint Operation Mining Plan (28 Ha) - PT Jagad Rayatama.pptx
Appendix 11 analysis of rates - balsio shp phase ii - 28032014
Appendix 11 analysis of rates - balsio shp phase ii - 28032014
Productivity analysis of Burried/underground cable laying Activity
Productivity analysis of Burried/underground cable laying Activity
Ambuja Cements Ltd. Internship Project Presentation
Ambuja Cements Ltd. Internship Project Presentation
More from Arthur Wilson
Pm group-compileddd
This document provides information about a proposed project to develop a three-story car park with a convenience store at Taylor's University Lakeside Campus. The project aims to address parking issues on campus and provide students with cheaper shopping options. If approved, the client will build the car park and 99 Speedmart franchise on land rented from the university for RM15,000 per month over 20 years. The development is expected to benefit students socially and financially, while complying with Malaysian education policies.
Activity id
The document outlines a construction project schedule with 16 activities including obtaining city and building permits, site work like excavation and piling, and structure work like foundations and concrete. The activities have assigned durations and indicate dependencies between tasks. For example, building permits takes 21 days and depends on obtaining city permits first. The schedule is to be completed after the project start date of May 19, 2017 while adhering to assumptions like working Saturdays and allowing concrete work on Sundays.
Pm project-control-compiled
Project control involves managing cost, time, and quality. This project prioritizes time and cost control given the building's nature. Various methods will be used to control time, including focusing on fast materials and analyzing worker productivity. Cost control will involve detailed planning, budgeting, and controlling by a specialized team. Quality control uses a six sigma approach to define standards and requirements, measure performance, analyze issues, improve processes, and continuously control quality through the DMAIC cycle. The goal is satisfying needs while meeting standards.
Final 2
This document is a student dissertation that examines the competencies of quantity surveying students in Malaysia's construction industry. Specifically, it investigates the expectations of employers regarding the competencies of new graduates and compares this to the educational framework provided by universities. The dissertation was submitted in fulfillment of a Bachelor's degree in Quantity Surveying at Taylor's University in Malaysia. It includes a literature review on competencies, employer expectations, and the Malaysian education system. The student conducted surveys of graduates and interviews with employers and lecturers to understand competency gaps. The research aims to establish solutions to conflicts between employer needs and the competencies developed through university education.
Law relating-to-payment
The document discusses laws relating to payment in construction contracts, including the nature and operation of interim and final payment certificates, the certification process, the certifier's role and responsibilities, and challenges that can be made to certificates. Interim certificates provide temporary finality and entitle contractors to immediate payment, while final certificates are intended to be the conclusive statement of any outstanding amounts due. Contractors have remedies such as arbitration if certificates are wrongfully withheld or issued.
Cl report final
This document provides an analysis and professional advice for Smart Builder Construction regarding issues that arose on a construction project. It analyzes the issues based on the FIDIC Red Book 1999 and the PAM Contract 2006. Key issues included delayed site handover, non-payment of certificates, design changes incurring extra costs, and disputes over testing and defects. Advice is provided on the contractor's responsibilities, payment conditions, contractual programming, and dispute resolution methods. The contractor is advised to claim interest on late payments under the FIDIC Red Book and consider statutory adjudication for faster resolution of non-payment issues.
Vm assignment - presentation slide (1)
1. The document reports on a value management case study conducted for Straits International School in Rawang, Selangor, Malaysia.
2. The study identified several issues with the school's design including noise pollution from sports activities, an unsuitable space for badminton, and duplicate functions for a playground and playroom.
3. Alternative solutions were proposed using techniques like fast diagrams, value trees, and creativity methods. An action plan was developed to address the issues and improve the design's value.
Vm compiled-edited (print)
Remove the playground area on the ground floor and increase the size of the playroom. Acoustic wall panels will be added to classrooms on the second floor to reduce noise pollution. The four badminton courts on the third floor will be changed to two tennis courts under a new roof structure to protect the playing surface from weather and allow play that is not impacted by wind. The changes were recommended to increase value by removing unnecessary spaces, improving the learning environment, and replacing a space with a more suitable outdoor activity.
De assignment-finalized-28112017
The document proposes developing a plot of land measuring 435,600 square feet into commercial and residential units. It outlines plans for 18 double-storey shop/office lots of 2,080 square feet each, accounting for 15% of the development area. It also details plans for 83 double-storey terrace houses of 1,650 square feet each, taking up 55% of the area, and distributed across 7 blocks. Finally, it proposes developing 64 low-cost houses of 1,200 square feet each, using 30% of the area spread over 5 blocks.
De assignment-finalized-28112017 6
The document analyzes the viability of a project based on its net present value (NPV). NPV is the difference between the present value of cash inflows and outflows of a project. The document shows the quarterly cash flows in a table for 12 years, calculating the net cash flow and discounted cash flow for each period using a 12% discount rate. It determines that the NPV of the project in 2013 is RM 8,429,105.25 and the NPV in 2010 is RM 11,842,285.98, indicating the project is profitable.
De assignment-finalized-28112017 5
This document provides a quarterly cash flow analysis for a development project from 2010 to 2017. It shows cash inflows from property sales projections and cash outflows for items like construction costs, land costs, financing costs, fees, and administrative expenses. For each quarter, it calculates the net cash flow, cumulative cash flow, and cumulative cash inflow and outflow. The total projected sales are RM60,961,770 and total cash outflow is RM44,656,657.56, resulting in a positive cumulative cash flow of RM16,305,112.44 by the end of 2017.
De assignment-finalized-28112017 4
This document provides a projected cash outflow schedule for a construction project from 2013 to 2016. It outlines the construction costs by item and month, showing the monthly and quarterly cash outflows. The total construction cost is $19,265,375 and will be paid in two moieties, with the second half paid in 2016. Retention amounts are deducted from the monthly outflows.
De assignment-finalized-28112017 3
The document outlines the projected cash flow for a property development project from 2013-2016. It is divided into three sections: cash inflow, cash outflow, and quarterly cashflow. The cash inflow section projects the monthly and quarterly sales percentages and amounts for different property types over several quarters. It also outlines the payment schedule for purchasers upon taking possession, with installments due at 8 months, 24 months, and upon receiving title documents. The total projected quarterly and annual cash inflows are provided.
De assignment-finalized-28112017 2
This section provides a financial appraisal of a proposed property development using the residue method of valuation. It details the gross development value, land and construction costs, administrative costs including fees and financing, and contingencies to calculate the total gross development cost. The gross development profit is then determined by taking the difference between the gross development value and cost, which in this case is RM16,305,112.44 or 29.94% of the gross development value.
Research proposal draft v3
This document is a research proposal submitted by a student named Liew Yong Sheng exploring the competencies of quantity surveying students in Malaysia's construction industry. The proposal includes an introduction providing background on quantity surveyors and defining their competencies. It identifies the problem that universities may not be adequately preparing students for the skills employers require. The research questions whether students' competencies match employer expectations. The objectives are to identify employer expectations, understand how universities develop competencies, and establish solutions to differences. The research design involves questionnaires, interviews and literature review. The findings could help reduce graduate unemployment by better aligning education with industry needs.
Chapter 2 draft v1
This document is a literature review by student Liew Yong Sheng exploring the competencies of quantity surveying students in the Malaysian construction industry. It discusses various models and frameworks for defining key competencies from organizations like RICS, AIQS, and BQSM. Soft skills are also examined as an important complement to technical skills. The review finds some differences in how competencies are categorized between models but also agreements on core skills like construction technology, cost estimation, and management abilities. Employers are expected to demand both technical and soft skills as the construction industry grows in Malaysia. The literature review aims to identify competency gaps between employer demands and current education frameworks.
Fm assignment-final-updated v2.0
This document provides background information on LBS Bina Group Berhad, a Malaysian property development company. It discusses the company's history, operations, financial performance, industry conditions, and SWOT analysis. Some key points:
- LBS Bina Group has been operating since 1983 and focuses on property development, construction, management services, and other businesses. It is publicly listed on Bursa Malaysia.
- In the 2017 financial year, the company generated a total revenue of RM680 million from its various business segments, with property development contributing the majority at RM577 million.
- The property industry in Malaysia has been slowing in recent years due to economic factors. Transaction volumes and values declined in 2016 and the
De & be final workshop submission
The document provides details on the proposed development of a mixed-use building on a plot of land in Singapore. It includes a project introduction describing the client's requirements for a Grade A green building. It then provides details on the site location and subdivision, and proposed uses for each plot. The building will feature office space, retail, a childcare center, and green building elements like a green wall, rainwater harvesting, and solar panels. It also includes a construction cost breakdown estimating the project will cost $771.4 million, and lists key assumptions made in the cost estimation.
Community service
1. The document describes the author's involvement in a community service event at RumahCharis, a former elderly home that now serves as an orphanage.
2. As part of the event, the author helped with music, designed name cards and coloring pages for the children based on four color-coded teams, and created a photoboard to display pictures.
3. The author found joy in inspiring the children's interest in art, drawing characters and scenes for them and giving drawing tips. The goal was to spark the children's creativity and dreams through art.
Elemental cost analysis
The document is an elemental cost analysis report prepared by 12 group members for the Gamuda Walk Kota Kemuning community mall project. The mall includes shops for groceries, food and beverages, gifts, entertainment, and office suites. The report includes the project timeline from the initial tender submission in March 2013 to completion in November 2014 and various cost analysis forms.
More from Arthur Wilson (20)
Recently uploaded
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Navigating today's data landscape isn't just about managing workflows; it's about strategically propelling your business forward. Apache Airflow has stood out as the benchmark in this arena, driving data orchestration forward since its early days. As we dive into the complexities of our current data-rich environment, where the sheer volume of information and its timely, accurate processing are crucial for AI and ML applications, the role of Airflow has never been more critical.
In my journey as the Senior Engineering Director and a pivotal member of Apache Airflow's Project Management Committee (PMC), I've witnessed Airflow transform data handling, making agility and insight the norm in an ever-evolving digital space. At Astronomer, our collaboration with leading AI & ML teams worldwide has not only tested but also proven Airflow's mettle in delivering data reliably and efficiently—data that now powers not just insights but core business functions.
This session is a deep dive into the essence of Airflow's success. We'll trace its evolution from a budding project to the backbone of data orchestration it is today, constantly adapting to meet the next wave of data challenges, including those brought on by Generative AI. It's this forward-thinking adaptability that keeps Airflow at the forefront of innovation, ready for whatever comes next.
The ever-growing demands of AI and ML applications have ushered in an era where sophisticated data management isn't a luxury—it's a necessity. Airflow's innate flexibility and scalability are what makes it indispensable in managing the intricate workflows of today, especially those involving Large Language Models (LLMs).
This talk isn't just a rundown of Airflow's features; it's about harnessing these capabilities to turn your data workflows into a strategic asset. Together, we'll explore how Airflow remains at the cutting edge of data orchestration, ensuring your organization is not just keeping pace but setting the pace in a data-driven future.
Session in https://budapestdata.hu/2024/04/kaxil-naik-astronomer-io/ | https://dataml24.sessionize.com/session/667627
Experts live - Improving user adoption with AI
Bekijk de slides van onze sessie Enhancing Modern Workplace Efficiency op Experts Live 2024.
Population Growth in Bataan: The effects of population growth around rural pl...
A population analysis specific to Bataan.
Build applications with generative AI on Google Cloud
We will explore Vertex AI - Model Garden powered experiences, we are going to learn more about the integration of these generative AI APIs. We are going to see in action what the Gemini family of generative models are for developers to build and deploy AI-driven applications. Vertex AI includes a suite of foundation models, these are referred to as the PaLM and Gemini family of generative ai models, and they come in different versions. We are going to cover how to use via API to: - execute prompts in text and chat - cover multimodal use cases with image prompts. - finetune and distill to improve knowledge domains - run function calls with foundation models to optimize them for specific tasks. At the end of the session, developers will understand how to innovate with generative AI and develop apps using the generative ai industry trends.
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
This webinar will explore cutting-edge, less familiar but powerful experimentation methodologies which address well-known limitations of standard A/B Testing. Designed for data and product leaders, this session aims to inspire the embrace of innovative approaches and provide insights into the frontiers of experimentation!
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UO毕业证)渥太华大学毕业证如何办理
UO毕业证录取书【微信95270640】购买（渥太华大学毕业证成绩单硕士学历）Q微信95270640代办UO学历认证留信网伪造渥太华大学学位证书精仿渥太华大学本科/硕士文凭证书补办渥太华大学 diplomaoffer,Transcript购买渥太华大学毕业证成绩单购买UO假毕业证学位证书购买伪造渥太华大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：渥太华大学渥太华大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲说起这事时父亲很吃惊抚摸着山娃的头说还好醒得及时要不家早被人掏空了到时连电视也没得看啰不过父亲还是夸山娃能临危不乱随机应变有胆有谋山娃笑笑说那都是书上学的看童话和小说时多
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
Embark on a captivating financial journey with 'Financial Odyssey,' our hackathon project. Delve deep into the past performance of two companies as we employ an array of financial statement analysis techniques. From ratio analysis to trend analysis, uncover insights crucial for informed decision-making in the dynamic world of finance."
一比一原版(Unimelb毕业证书)墨尔本大学毕业证如何办理
原版制作【微信:41543339】【(Unimelb毕业证书)墨尔本大学毕业证】【微信:41543339】《成绩单、外壳、雅思、offer、留信学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同进口机器一比一制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版兰加拉学院毕业证(Langara毕业证书)学历如何办理
原版办【微信号:BYZS866】【兰加拉学院毕业证(Langara毕业证书)】【微信号:BYZS866】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(harvard毕业证书）哈佛大学毕业证如何办理
一模一样【微信：A575476】【(harvard毕业证书）哈佛大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UO毕业证)渥太华大学毕业证如何办理
原件一模一样【微信：95270640】【渥太华大学毕业证UO学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理渥太华大学毕业证毕业证offerUO学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理渥太华大学毕业证UO学位证毕业证offer【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理渥太华大学毕业证毕业证offerUO学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理渥太华大学毕业证毕业证offerUO学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Open Source Contributions to Postgres: The Basics POSETTE 2024
Postgres is the most advanced open-source database in the world and it's supported by a community, not a single company. So how does this work? How does code actually get into Postgres? I recently had a patch submitted and committed and I want to share what I learned in that process. I’ll give you an overview of Postgres versions and how the underlying project codebase functions. I’ll also show you the process for submitting a patch and getting that tested and committed.
一比一原版(UMN文凭证书)明尼苏达大学毕业证如何办理
毕业原版【微信:176555708】【(UMN毕业证书)明尼苏达大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
End-to-end pipeline agility - Berlin Buzzwords 2024
We describe how we achieve high change agility in data engineering by eliminating the fear of breaking downstream data pipelines through end-to-end pipeline testing, and by using schema metaprogramming to safely eliminate boilerplate involved in changes that affect whole pipelines.
A quick poll on agility in changing pipelines from end to end indicated a huge span in capabilities. For the question "How long time does it take for all downstream pipelines to be adapted to an upstream change," the median response was 6 months, but some respondents could do it in less than a day. When quantitative data engineering differences between the best and worst are measured, the span is often 100x-1000x, sometimes even more.
A long time ago, we suffered at Spotify from fear of changing pipelines due to not knowing what the impact might be downstream. We made plans for a technical solution to test pipelines end-to-end to mitigate that fear, but the effort failed for cultural reasons. We eventually solved this challenge, but in a different context. In this presentation we will describe how we test full pipelines effectively by manipulating workflow orchestration, which enables us to make changes in pipelines without fear of breaking downstream.
Making schema changes that affect many jobs also involves a lot of toil and boilerplate. Using schema-on-read mitigates some of it, but has drawbacks since it makes it more difficult to detect errors early. We will describe how we have rejected this tradeoff by applying schema metaprogramming, eliminating boilerplate but keeping the protection of static typing, thereby further improving agility to quickly modify data pipelines without fear.
Recently uploaded (20)
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Population Growth in Bataan: The effects of population growth around rural pl...
Population Growth in Bataan: The effects of population growth around rural pl...
Build applications with generative AI on Google Cloud
Build applications with generative AI on Google Cloud
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
Monthly Management report for the Month of May 2024
Monthly Management report for the Month of May 2024
Challenges of Nation Building-1.pptx with more important
Challenges of Nation Building-1.pptx with more important
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Open Source Contributions to Postgres: The Basics POSETTE 2024
Open Source Contributions to Postgres: The Basics POSETTE 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
Excavation
- 1. Excavation Data Excavation to Reduce Level Trench: 10m2x1m deep Excavation Output: 1.75-2.00 hour/m3 Required 1 General Construction Worker at RM52.50 per day Allow 15% profit including overhead 5m3 lorry hire rate RM400 per day Return trip 30 minutes Loading trip require 60 minutes Unloading trip require 60 minutes Allow 15% idle factor Allow 2 unskilled labourers for loading and unloading at RM52.50 per day per person Excavation to Pit for Pad Foundation and Column Stump Pit size: 0.45x0.45x2.1m deep and 9 nos Column stump: 0.25x0.25x0.16m deep Allow 13% compaction for ordinary soil Excavation output: 3.00-4.50 hour/m3 Required 2 General Construction Worker at RM52.50 per day Additional 25% of time required to excavate and backfill Allow 15% profit including overhead Excavation to Trench for Ground Beam Trench size: 66x0.25x0.55 Excavation Output: 2.00-2.75 hour/m3 Required 2 General Construction Worker at RM52.50 per day Allow 15% profit including overhead
- 2. Calculation:- Excavation to Reduce Level Quantity Excavation < 1.50m deep 10m2 x 1m 10m3 Time Required Excavation < 1.50m deep 10m3 x 1.75 hour/m3 17.50 hour Labour Cost Hour rate for General Construction Worker RM52.50/8 hour RM6.56/hour Hour required x hour rate RM6.56/hour x 17.50 hour RM114.80 Removal of Surplus Trench size 10m3 No of trips 10m3 / 5m3/trip 2 trip Time Required 2 trip x (1+1+0.5)hour x 1.15 hour 5.75 hour Per day 5.75 hour/ 8 hour/day 0.72 ≈1 day Allow 2 unskilled labourers for loading and unloading at RM52.50 per day per person RM52.50/day x 1 day x 2 labourers RM105 Truck cost Rm400/day x 1 day RM400 Total Cost Excavate and Removal of surplus RM114.80+RM105+RM400 RM619.80 Unit rate RM619.80/10 RM61.98 Allow 15% profit including overhead RM61.98x0.15 RM9.30 71.28/m3
- 3. Excavation to Pit for Pad Foundation and Column Stump Quantity Pit Size (0.45mx0.45mx2.10m) x 9nos 3.83m3 Excavation <1.50m deep 0.45mx0.45mx1.50mx9nos 2.73m3 Excavation >1.50m - 3.00m deep 0.45mx0.45mx(2.10m-1.50m)x9nos 1.09m3 Backfill [(0.45x0.45x1.6)-(0.25x0.25x1.6)]x9 2.02m3 Allow 13% compaction 2.02x13% 0.26m3 2.28m3 Time Required Excavation <1.50m deep 2.73m3 x 3.00hour/m3 8.19 hour Excavation >1.50m - 3.00m deep 1.09m3x3.50hour/m3 3.82 hour Backfill 2.28m3x1hour/m3 2.28hour Total hour 14.29hour Additional 25% time to backfill and excavate 14.29hourx1.25 17.86hour Cost Hourly rate of a General Construction Worker RM52.50/8hours RM6.56/hour Hour required x 2 General Construction Worker 17.86 hour x RM6.56/hourx2 RM234.32 Allow 15% profit including overhead RM234.32x1.15 RM269.47 Unit Rate RM269.47/3.83m3 RM70.36/m3
- 4. Excavate to Trench for Ground Beam Quantity Excavate <1.50m deep 66mx0.25mx0.55m 9.08m3 Time Required Excavate <1.50m deep 9.08m3 x 2.00 hour/m3 18.15 hour Cost Hour rate of General Construction Worker RM52.50/8 hour RM6.56/hour Hour rate x Time required 18.15 hour x RM6.56/hour RM119.06 Allow 15% profit including overhead RM119.06x1.15 RM136.92 Unit Rate RM136.92/9.08m3 RM15.08/m3