Konstantin Staschus and Sophie Dourlens will present the new ETIP SNET Implementation Plan (IP) 2017-2020 which is to be released on 5 October 2017
The Implementation Plan aims at listing the short-term priorities for R&I in ETIP SNET’s scope and as defined by the action 4 of the EU’s Strategic Energy Technology Plan: Increase the resilience, security and smartness of the energy system. It is based upon the ETIP-SNET R&I roadmap 2017-2026 which specifies the long-term R&I activities for the evolution of the European energy system and published in January 2017.
The Implementation Plan is the result of a long and comprehensive stakeholders consultation process which makes it widely recognised by all the European energy transition stakeholders.
ETIP SNET: For an innovative and successful European energy transition Leonardo ENERGY
The ETIP Smart Networks for Energy Transition (SNET) role is to guide Research, Development & Innovation (RD&I) to support Europe’s energy transition, more specifically, its mission is to set-out a vision for RD&I for Smart Networks for Energy Transition and engage stakeholders in this vision.
In this webinar the ETIP SNET role and main priorities will be introduced by its chairman Konstantin Staschus. Eric Peirano will present the new 10 year ETIP SNET Research & Innovation Roadmap 2017-2026. The roadmap provides a system view and addresses a scope larger than smart electricity grids by encompassing interactions with the gas and heat networks and focuses on integration of all flexibility solutions into the power system, including energy storage technologies.
September 2019 edition of the DecarbEurope primer on electric vehicles, reviewing some of the major issues to address in the coming years:
* low-emission zones
* right-to-plug
* 150 kW network
Energy efficiency trends in buildings in the EULeonardo ENERGY
(For an updated version of this deck, addressing pending questions with some more details and references, please visit https://www.slideshare.net/sustenergy/energy-efficiency-trends-in-buildings-in-the-eu-update)
What has been the overall trend in final energy consumption of buildings in the EU since 2010?
What are the main drivers of the energy consumption variation, and in particular energy savings, for residential and service buildings?
These are the key questions answered during this (11th) webinar in the Odyssee-Mure on Energy Efficiency Academy.
Highlights from their research:
➢The energy consumption of buildings has steadily decreased since 2010 despite GDP growth.
➢There are large disparities in building performances across countries.
➢Since 2015, the rate of household energy efficiency improvements has dropped by 50% (compared to 2000-2014).
➢Energy efficiency of large electrical appliances, which has largely improved in the past, does not counterbalance anymore the rapid growth of the consumption of small appliances.
Flexibility needs at system level and how RD&I projects are leveraging these ...Leonardo ENERGY
Recording at https://youtu.be/cd5bRnSM0zI
The presentation provides an introduction to flexibility solutions, which can be used to increase efficiency in power systems. The solutions considered for the webinar are network level solutions. This introduction is followed by the presentation of FlexPlan and CoordiNet as examples of RD&I projects where flexibility solutions are being developed to change the power system landscape.
Electric motors
Editorial - Policy solutions - Facts - Interview - Success stories - Improving market surveillance - Extended product approach - Motor maintenance and refurbishment - Accelerated replacement of less efficient motor stock - Developing powertrains for electric mobility free of critical raw materials - World landscape
The goal of DecarbEurope is to engage decision-makers in policy and industry with solutions that can, in a cost-effective manner, decarbonise Europe at the scale and speed that is needed to achieve our climate goals.
As an ecosystem of twenty sectors — and growing — the initiative connects technologies, policies, and markets. Partners of DecarbEurope commit themselves to common values of deep decarbonisation, cost-effectiveness, circularity, sector-coupling and consumer engagement.
Electric motors play a major role in all economic sectors (industrial, tertiary, residential, agricultural and in transportation), to deliver in a reliable and efficient way mechanical power to a huge variety of processes and services
Quis custodiet ipsos custodes? The EU's energy efficiency policies scrutinise...Leonardo ENERGY
The European Court of Auditors (ECA) promotes accountability and transparency, and acts as the independent guardian of the financial interests of the EU citizens. ECA recently published two reports about EU energy efficiency policies (about appliances and buildings).
This webinar will present ECA’s role in the EU policy process, how it relates to evaluation, and the main conclusions from the two recent reports.
Spring Seminar FUNSEAM
The Clean Energy Package and the Role of Renewables
Sofia Pinto Barbosa
Unit Renewable Energy and CCS Policy, DG ENERGY
European Commission
Madrid, March 23rd. 2017
FUNSEAM AND EDP RENOVÁVEIS
ETIP SNET: For an innovative and successful European energy transition Leonardo ENERGY
The ETIP Smart Networks for Energy Transition (SNET) role is to guide Research, Development & Innovation (RD&I) to support Europe’s energy transition, more specifically, its mission is to set-out a vision for RD&I for Smart Networks for Energy Transition and engage stakeholders in this vision.
In this webinar the ETIP SNET role and main priorities will be introduced by its chairman Konstantin Staschus. Eric Peirano will present the new 10 year ETIP SNET Research & Innovation Roadmap 2017-2026. The roadmap provides a system view and addresses a scope larger than smart electricity grids by encompassing interactions with the gas and heat networks and focuses on integration of all flexibility solutions into the power system, including energy storage technologies.
September 2019 edition of the DecarbEurope primer on electric vehicles, reviewing some of the major issues to address in the coming years:
* low-emission zones
* right-to-plug
* 150 kW network
Energy efficiency trends in buildings in the EULeonardo ENERGY
(For an updated version of this deck, addressing pending questions with some more details and references, please visit https://www.slideshare.net/sustenergy/energy-efficiency-trends-in-buildings-in-the-eu-update)
What has been the overall trend in final energy consumption of buildings in the EU since 2010?
What are the main drivers of the energy consumption variation, and in particular energy savings, for residential and service buildings?
These are the key questions answered during this (11th) webinar in the Odyssee-Mure on Energy Efficiency Academy.
Highlights from their research:
➢The energy consumption of buildings has steadily decreased since 2010 despite GDP growth.
➢There are large disparities in building performances across countries.
➢Since 2015, the rate of household energy efficiency improvements has dropped by 50% (compared to 2000-2014).
➢Energy efficiency of large electrical appliances, which has largely improved in the past, does not counterbalance anymore the rapid growth of the consumption of small appliances.
Flexibility needs at system level and how RD&I projects are leveraging these ...Leonardo ENERGY
Recording at https://youtu.be/cd5bRnSM0zI
The presentation provides an introduction to flexibility solutions, which can be used to increase efficiency in power systems. The solutions considered for the webinar are network level solutions. This introduction is followed by the presentation of FlexPlan and CoordiNet as examples of RD&I projects where flexibility solutions are being developed to change the power system landscape.
Electric motors
Editorial - Policy solutions - Facts - Interview - Success stories - Improving market surveillance - Extended product approach - Motor maintenance and refurbishment - Accelerated replacement of less efficient motor stock - Developing powertrains for electric mobility free of critical raw materials - World landscape
The goal of DecarbEurope is to engage decision-makers in policy and industry with solutions that can, in a cost-effective manner, decarbonise Europe at the scale and speed that is needed to achieve our climate goals.
As an ecosystem of twenty sectors — and growing — the initiative connects technologies, policies, and markets. Partners of DecarbEurope commit themselves to common values of deep decarbonisation, cost-effectiveness, circularity, sector-coupling and consumer engagement.
Electric motors play a major role in all economic sectors (industrial, tertiary, residential, agricultural and in transportation), to deliver in a reliable and efficient way mechanical power to a huge variety of processes and services
Quis custodiet ipsos custodes? The EU's energy efficiency policies scrutinise...Leonardo ENERGY
The European Court of Auditors (ECA) promotes accountability and transparency, and acts as the independent guardian of the financial interests of the EU citizens. ECA recently published two reports about EU energy efficiency policies (about appliances and buildings).
This webinar will present ECA’s role in the EU policy process, how it relates to evaluation, and the main conclusions from the two recent reports.
Spring Seminar FUNSEAM
The Clean Energy Package and the Role of Renewables
Sofia Pinto Barbosa
Unit Renewable Energy and CCS Policy, DG ENERGY
European Commission
Madrid, March 23rd. 2017
FUNSEAM AND EDP RENOVÁVEIS
The need to model coupled energy networks to transition to a decarbonized futureLeonardo ENERGY
Webinar recording at https://youtu.be/2A-aVb6OHTE
The coordination between planners and operators of coupled energy systems will allow the further integration of renewable energy sources in the electricity network by storing energy in fuel form over long periods of time using power-to-gas, the recovery and more efficient use of heat, and the decarbonization of industrial processes and transportation modes that can’t be electrified. Energy networks, such as electricity grids and natural gas pipeline networks, have traditionally been planned and operated independently. In order to enhance the integration and coordination of different energy networks, they must be planned and operated in coupled ways. Different energy networks have historically been and are still modelled by different tools. In this presentation we will discuss the need model coupled energy systems in a single framework and we will introduce encoord’s Scenario Analysis Interface for Energy Systems (SAInt), a software application to model, plan, and operate coupled energy networks.
Energy efficiency trends in buildings in the EU (update)Leonardo ENERGY
(This is an updated version of the slides used during the 11th webinar in the Odyssee-Mure on Energy Efficiency Academy at 08 Dec 2020. This version addresses pending questions with some more details and references.)
What has been the overall trend in final energy consumption of buildings in the EU since 2010?
What are the main drivers of the energy consumption variation, and in particular energy savings, for residential and service buildings?
These are the key questions answered during this (11th) webinar in the Odyssee-Mure on Energy Efficiency Academy.
Highlights from their research:
➢The energy consumption of buildings has steadily decreased since 2010 despite GDP growth.
➢There are large disparities in building performances across countries.
➢Since 2015, the rate of household energy efficiency improvements has dropped by 50% (compared to 2000-2014).
➢Energy efficiency of large electrical appliances, which has largely improved in the past, does not counterbalance anymore the rapid growth of the consumption of small appliances.
Philipp Steinberg - La transición energética en Europa y el cambio climáticoFundación Ramón Areces
Entre el 30 de junio y el 2 de julio de 2014 organizamos en la Fundación Ramón Areces (C/ Vitruvio, 5, en Madrid) un curso de verano en colaboración con la Universidad Complutense de Madrid sobre los retos energéticos de Europa ante el cambio climático. En estas jornadas, diferentes expertos analizaron la transición energética en Europa para cumplir las exigencias de los compromisos internacionales en materia de emisiones de CO2.
2016 IndustRE Workshop - 3 DSM Flexibility Assessment MethodologyLeonardo ENERGY
www.industre.eu
September 2016 Stakeholders Workshop
Simplified methodology to determine the value of industrial flexibility in given electricity market conditions.
New business models for distribution grid stakeholders under high penetration...Leonardo ENERGY
Webinar recording at https://youtu.be/F53mrwelvVI
The webinar mainly targets DSOs, and potential flexibility providers (VPPs, aggregators, flexible consumers), but it is also relevant to all other stakeholders with an interest in the topics of smart distribution grids, local flexibility services and aggregation. These includes, but is not limited to: regulators, academics and researchers on these topics, retailers, or software and data service providers.
Five actions fit for 55: streamlining energy savings calculationsLeonardo ENERGY
During the first year of the H2020 project streamSAVE, multiple activities were organized to support countries in developing savings estimations under Art.3 and Art.7 of the Energy Efficiency Directive (EED).
A fascinating output of the project so far is the “Guidance on Standardized saving methodologies (energy, CO2 and costs)” for a first round of five so-called Priority Actions. This Guidance will assist EU member states in more accurately calculating savings for a set of new energy efficiency actions.
This webinar presents this Guidance and other project findings to the broader community, including industry and markets.
AGENDA
14:00 Introduction to streamSAVE
(Nele Renders, Project Coordinator)
14:10 Views from the EU Commission and the link with Fit-for-55 (Anne-Katherina Weidenbach, DG ENER)
14:20 The streamSAVE guidance and its platform illustrated (Elisabeth Böck, AEA)
14:55 A view from industry: What is the added value of streamSAVE (standardized) methods in frame of the EED (Conor Molloy, AEMS ECOfleet)
14:55 Country experiences: the added value of standardized methods (Elena Allegrini, ENEA, Italy)
The recordings of the webinar can be found on https://youtu.be/eUht10cUK1o
This webinar is dedicated to the findings of the 3rd issue of the PV Grid Parity Monitor for Residential Consumers.
The Photovoltaic Grid Parity Monitor analyses PV competitiveness with retail electricity prices for residential consumers and assesses local regulation for self-consumption of 21 cities in 12 countries (Australia, Brazil, Chile, France, Germany, Italy, Israel, Japan, Mexico, Spain, UK, USA).
It is based on a rigorous and transparent methodology and has used real and updated data provided by local PV installers, local PV associations and other reliable players from the PV industry. A specific and in-depth analysis of retail electricity rates for each of the 21 cities is included.
Given that PV Grid Parity represents a unique opportunity to develop a local and sustainable power generation technology in a cost-effective way, this Monitor aims at giving benchmark elements and good practice models to foster the development of this technology.
http://www.leonardo-energy.org/webinar/3rd-photovoltaic-grid-parity-monitor-residential-consumers-session-1
A new generation of instruments and tools to monitor buildings performanceLeonardo ENERGY
What is the added value of monitoring the flexibility, comfort, and well-being of a building? How can occupants be better informed about the performance of their building? And how to optimize a building's maintenance?
The slides were presented during a webinar and roundtable with a focus on a new generation of instruments and tools to monitor buildings' performance, and their link with the Smart Readiness Indicator (SRI) for buildings as introduced in the EU's Energy Performance of Buildings Directive (EPBD).
Link to the recordings: https://youtu.be/ZCFhmldvRA0
Future Electricity Markets: key pillars with high shares of wind and PVLeonardo ENERGY
More and more countries world-wide are targeting high shares of wind and solar photovoltaics in their electricity mix. To integrate high shares of these variable renewable energy sources, the electricity system needs to become more flexible in order to balance supply and demand at all times. The webinar will discuss key design features of future electricity markets, including incentives for more flexible fossil-fuel based and renewable-based power generation, modifications to the design of electricity markets, incentives for more flexible demand, and storage options.
Energy Sufficiency Indicators and Policies (Lea Gynther, Motiva)Leonardo ENERGY
This policy brief looks at questions ‘how to measure energy sufficiency’, ‘which policies and measures can be used to address energy sufficiency’ and ‘how they are used in Europe today’.
Energy sufficiency refers to a situation where everyone has access to the energy services they need, whilst the impacts of the energy system do not exceed environmental limits. The level of ambition needed to address energy sufficiency is higher than in the case of energy efficiency.
This is the 13th edition of the Odyssee-Mure on Energy Efficiency Academy, and number 519 in the Leonardo ENERGY series. The recording of the live presentation can be found on https://www.youtube.com/watch?v=jEAdYbI0wDI&list=PLUFRNkTrB5O_V155aGXfZ4b3R0fvT7sKz
2016 IndustRE Workshop - 1 business models and policy recommendationsLeonardo ENERGY
www.industre.eu
September 2016 Stakeholders Workshop.
Presentation of business models for industrial demand side management and policy recommendations for the electricity market design.
Power to the people: shifting control over electricity to citizens and consumersLeonardo ENERGY
Efficient electricity prices are only the first step to unleashing the potential for consumers to help drive the energy transition. In this webinar, David Robinson from the Oxford Institute for Energy Studies will present on how consumers can help decarbonize the electricity system and how to engage the demand side through a combination of price and non-price incentives.
Addressing the Energy Efficiency First Principle in a National Energy and Cli...Leonardo ENERGY
When designing energy and climate policies, EU Member States have to apply the Energy Efficiency First Principle: priority should be given to measures reducing energy consumption before other decarbonization interventions are adopted. This webinar summarizes elements of the energy and climate policy of Cyprus illustrating how national authorities have addressed this principle so far, and outline challenges towards its much more rigorous implementation that is required in the coming years.
Energy efficiency, structural change and energy savings in the manufacturing ...Leonardo ENERGY
The first part of the presentations presents the energy efficiency improvements in the manufacturing sector since 2000, and the role of structural change between the different branches and energy savings. It will compare the improvements in Denmark and other countries with EU average. This part is based on ODYSSEE data.
The second part of the presentation presents the development in Denmark in more detail, and it will compare the energy efficiency improvement, corrected for structural change, with the reported savings from the Energy Efficiency Obligation Scheme.
Recordings of the live webinar are on https://youtu.be/VVAdw_CS51A
BACS requirements in the revised EPBD: How to check compliance?Leonardo ENERGY
To support EU Member States in implementing the revised Energy Performance of Buildings Directive (EPBD), eu.bac has created a compliance checklist for Building Automation and Control System requirements related to the mandatory capabilities listed in Art.14 and Art.15.
The checklist provides a necessary reference list and highly detailed tool for building owners and managers, compliance inspectors, building designers, installers and policymakers.
In this slide deck:
1. The revised EPBD and the need for a tool to verify BACS compliance (Simone ALESSANDRI)
2. The EPBD BACS Compliance Verification Package (Bonnie BROOK)
3. Compliant BACS: prerequisite to the digital transformation of EU’s built environment (Andrei LITIU)
INTERPRETER – Local flexibility solutions leveraged by RD&I projects as syste...Leonardo ENERGY
Webinar recording at https://youtu.be/ueVkeVCbCCw
This presentation provides an introduction to flexibility solutions, focused on DSO and demand-side innovative service enabling solutions. This introduction will be followed by the presentation of ATTEST and INTERRFACE as examples of RD&I projects where these flexibility solutions are being developed at the European level.
Energy efficiency trends in the EU: Have we got off track?Diedert Debusscher
What has been the overall trend in final energy consumption and by sector in the EU since 2000? What are the main drivers of the energy consumption variation since 2000, and what has been the impact of energy savings? What are the trends in energy efficiency at the country level?
These are the key questions that will guide you through this webinar analysing energy efficiency trends in the EU for the period 2000-2019.
This presentation deck was used during the 9th webinar in the Odyssee-Mure on Energy Efficiency Academy on 25 June 2020. Recordings are available on https://www.youtube.com/user/LeonardoENERGY/videos?view=0&sort=dd&flow=grid
The webinar is an approximately 45 min presentation, followed by a live Q&A session with the panellists.
The need to model coupled energy networks to transition to a decarbonized futureLeonardo ENERGY
Webinar recording at https://youtu.be/2A-aVb6OHTE
The coordination between planners and operators of coupled energy systems will allow the further integration of renewable energy sources in the electricity network by storing energy in fuel form over long periods of time using power-to-gas, the recovery and more efficient use of heat, and the decarbonization of industrial processes and transportation modes that can’t be electrified. Energy networks, such as electricity grids and natural gas pipeline networks, have traditionally been planned and operated independently. In order to enhance the integration and coordination of different energy networks, they must be planned and operated in coupled ways. Different energy networks have historically been and are still modelled by different tools. In this presentation we will discuss the need model coupled energy systems in a single framework and we will introduce encoord’s Scenario Analysis Interface for Energy Systems (SAInt), a software application to model, plan, and operate coupled energy networks.
Energy efficiency trends in buildings in the EU (update)Leonardo ENERGY
(This is an updated version of the slides used during the 11th webinar in the Odyssee-Mure on Energy Efficiency Academy at 08 Dec 2020. This version addresses pending questions with some more details and references.)
What has been the overall trend in final energy consumption of buildings in the EU since 2010?
What are the main drivers of the energy consumption variation, and in particular energy savings, for residential and service buildings?
These are the key questions answered during this (11th) webinar in the Odyssee-Mure on Energy Efficiency Academy.
Highlights from their research:
➢The energy consumption of buildings has steadily decreased since 2010 despite GDP growth.
➢There are large disparities in building performances across countries.
➢Since 2015, the rate of household energy efficiency improvements has dropped by 50% (compared to 2000-2014).
➢Energy efficiency of large electrical appliances, which has largely improved in the past, does not counterbalance anymore the rapid growth of the consumption of small appliances.
Philipp Steinberg - La transición energética en Europa y el cambio climáticoFundación Ramón Areces
Entre el 30 de junio y el 2 de julio de 2014 organizamos en la Fundación Ramón Areces (C/ Vitruvio, 5, en Madrid) un curso de verano en colaboración con la Universidad Complutense de Madrid sobre los retos energéticos de Europa ante el cambio climático. En estas jornadas, diferentes expertos analizaron la transición energética en Europa para cumplir las exigencias de los compromisos internacionales en materia de emisiones de CO2.
2016 IndustRE Workshop - 3 DSM Flexibility Assessment MethodologyLeonardo ENERGY
www.industre.eu
September 2016 Stakeholders Workshop
Simplified methodology to determine the value of industrial flexibility in given electricity market conditions.
New business models for distribution grid stakeholders under high penetration...Leonardo ENERGY
Webinar recording at https://youtu.be/F53mrwelvVI
The webinar mainly targets DSOs, and potential flexibility providers (VPPs, aggregators, flexible consumers), but it is also relevant to all other stakeholders with an interest in the topics of smart distribution grids, local flexibility services and aggregation. These includes, but is not limited to: regulators, academics and researchers on these topics, retailers, or software and data service providers.
Five actions fit for 55: streamlining energy savings calculationsLeonardo ENERGY
During the first year of the H2020 project streamSAVE, multiple activities were organized to support countries in developing savings estimations under Art.3 and Art.7 of the Energy Efficiency Directive (EED).
A fascinating output of the project so far is the “Guidance on Standardized saving methodologies (energy, CO2 and costs)” for a first round of five so-called Priority Actions. This Guidance will assist EU member states in more accurately calculating savings for a set of new energy efficiency actions.
This webinar presents this Guidance and other project findings to the broader community, including industry and markets.
AGENDA
14:00 Introduction to streamSAVE
(Nele Renders, Project Coordinator)
14:10 Views from the EU Commission and the link with Fit-for-55 (Anne-Katherina Weidenbach, DG ENER)
14:20 The streamSAVE guidance and its platform illustrated (Elisabeth Böck, AEA)
14:55 A view from industry: What is the added value of streamSAVE (standardized) methods in frame of the EED (Conor Molloy, AEMS ECOfleet)
14:55 Country experiences: the added value of standardized methods (Elena Allegrini, ENEA, Italy)
The recordings of the webinar can be found on https://youtu.be/eUht10cUK1o
This webinar is dedicated to the findings of the 3rd issue of the PV Grid Parity Monitor for Residential Consumers.
The Photovoltaic Grid Parity Monitor analyses PV competitiveness with retail electricity prices for residential consumers and assesses local regulation for self-consumption of 21 cities in 12 countries (Australia, Brazil, Chile, France, Germany, Italy, Israel, Japan, Mexico, Spain, UK, USA).
It is based on a rigorous and transparent methodology and has used real and updated data provided by local PV installers, local PV associations and other reliable players from the PV industry. A specific and in-depth analysis of retail electricity rates for each of the 21 cities is included.
Given that PV Grid Parity represents a unique opportunity to develop a local and sustainable power generation technology in a cost-effective way, this Monitor aims at giving benchmark elements and good practice models to foster the development of this technology.
http://www.leonardo-energy.org/webinar/3rd-photovoltaic-grid-parity-monitor-residential-consumers-session-1
A new generation of instruments and tools to monitor buildings performanceLeonardo ENERGY
What is the added value of monitoring the flexibility, comfort, and well-being of a building? How can occupants be better informed about the performance of their building? And how to optimize a building's maintenance?
The slides were presented during a webinar and roundtable with a focus on a new generation of instruments and tools to monitor buildings' performance, and their link with the Smart Readiness Indicator (SRI) for buildings as introduced in the EU's Energy Performance of Buildings Directive (EPBD).
Link to the recordings: https://youtu.be/ZCFhmldvRA0
Future Electricity Markets: key pillars with high shares of wind and PVLeonardo ENERGY
More and more countries world-wide are targeting high shares of wind and solar photovoltaics in their electricity mix. To integrate high shares of these variable renewable energy sources, the electricity system needs to become more flexible in order to balance supply and demand at all times. The webinar will discuss key design features of future electricity markets, including incentives for more flexible fossil-fuel based and renewable-based power generation, modifications to the design of electricity markets, incentives for more flexible demand, and storage options.
Energy Sufficiency Indicators and Policies (Lea Gynther, Motiva)Leonardo ENERGY
This policy brief looks at questions ‘how to measure energy sufficiency’, ‘which policies and measures can be used to address energy sufficiency’ and ‘how they are used in Europe today’.
Energy sufficiency refers to a situation where everyone has access to the energy services they need, whilst the impacts of the energy system do not exceed environmental limits. The level of ambition needed to address energy sufficiency is higher than in the case of energy efficiency.
This is the 13th edition of the Odyssee-Mure on Energy Efficiency Academy, and number 519 in the Leonardo ENERGY series. The recording of the live presentation can be found on https://www.youtube.com/watch?v=jEAdYbI0wDI&list=PLUFRNkTrB5O_V155aGXfZ4b3R0fvT7sKz
2016 IndustRE Workshop - 1 business models and policy recommendationsLeonardo ENERGY
www.industre.eu
September 2016 Stakeholders Workshop.
Presentation of business models for industrial demand side management and policy recommendations for the electricity market design.
Power to the people: shifting control over electricity to citizens and consumersLeonardo ENERGY
Efficient electricity prices are only the first step to unleashing the potential for consumers to help drive the energy transition. In this webinar, David Robinson from the Oxford Institute for Energy Studies will present on how consumers can help decarbonize the electricity system and how to engage the demand side through a combination of price and non-price incentives.
Addressing the Energy Efficiency First Principle in a National Energy and Cli...Leonardo ENERGY
When designing energy and climate policies, EU Member States have to apply the Energy Efficiency First Principle: priority should be given to measures reducing energy consumption before other decarbonization interventions are adopted. This webinar summarizes elements of the energy and climate policy of Cyprus illustrating how national authorities have addressed this principle so far, and outline challenges towards its much more rigorous implementation that is required in the coming years.
Energy efficiency, structural change and energy savings in the manufacturing ...Leonardo ENERGY
The first part of the presentations presents the energy efficiency improvements in the manufacturing sector since 2000, and the role of structural change between the different branches and energy savings. It will compare the improvements in Denmark and other countries with EU average. This part is based on ODYSSEE data.
The second part of the presentation presents the development in Denmark in more detail, and it will compare the energy efficiency improvement, corrected for structural change, with the reported savings from the Energy Efficiency Obligation Scheme.
Recordings of the live webinar are on https://youtu.be/VVAdw_CS51A
BACS requirements in the revised EPBD: How to check compliance?Leonardo ENERGY
To support EU Member States in implementing the revised Energy Performance of Buildings Directive (EPBD), eu.bac has created a compliance checklist for Building Automation and Control System requirements related to the mandatory capabilities listed in Art.14 and Art.15.
The checklist provides a necessary reference list and highly detailed tool for building owners and managers, compliance inspectors, building designers, installers and policymakers.
In this slide deck:
1. The revised EPBD and the need for a tool to verify BACS compliance (Simone ALESSANDRI)
2. The EPBD BACS Compliance Verification Package (Bonnie BROOK)
3. Compliant BACS: prerequisite to the digital transformation of EU’s built environment (Andrei LITIU)
INTERPRETER – Local flexibility solutions leveraged by RD&I projects as syste...Leonardo ENERGY
Webinar recording at https://youtu.be/ueVkeVCbCCw
This presentation provides an introduction to flexibility solutions, focused on DSO and demand-side innovative service enabling solutions. This introduction will be followed by the presentation of ATTEST and INTERRFACE as examples of RD&I projects where these flexibility solutions are being developed at the European level.
Energy efficiency trends in the EU: Have we got off track?Diedert Debusscher
What has been the overall trend in final energy consumption and by sector in the EU since 2000? What are the main drivers of the energy consumption variation since 2000, and what has been the impact of energy savings? What are the trends in energy efficiency at the country level?
These are the key questions that will guide you through this webinar analysing energy efficiency trends in the EU for the period 2000-2019.
This presentation deck was used during the 9th webinar in the Odyssee-Mure on Energy Efficiency Academy on 25 June 2020. Recordings are available on https://www.youtube.com/user/LeonardoENERGY/videos?view=0&sort=dd&flow=grid
The webinar is an approximately 45 min presentation, followed by a live Q&A session with the panellists.
The European Strategic Energy Technology Plan (SET-Plan)Leonardo ENERGY
The European Strategic Energy Technology Plan (SET-Plan) aims to accelerate the development and deployment of low-carbon technologies. It seeks to improve new technologies and bring down costs by coordinating research and helping to finance projects. The SET-Plan promotes research and innovation efforts across Europe by supporting technologies with the greatest impact on the EU's transformation to a low-carbon energy system. It promotes cooperation amongst EU countries, companies, research institutions, and the EU itself.
Workshop : business cases for Energy Communities - 30/03/21Cluster TWEED
Last training session of 6 online training sessions for energy communities.
This 6 pack series is organised by TWEED and Flux50, energy clusters in Belgium.
Europe 2014-2020: smart grid (réseaux intelligents)UNITEC
présentations de la Délégation générale Société de l’Information à la délégation d’Aquitains conduite par AEC, 30 janvier 2012:
les réseaux intelligents (smart grid)
Introduction to the Energy Efficiency DirectiveLeonardo ENERGY
The Energy Efficiency Directive (EED) was adopted in 2012 and is one of the EU’s four key Directives addressing energy efficiency in stationary (i.e. non transport) end-uses (the others being the Energy Performance in Buildings Directive, The Ecodesign Directive and the Energy Labelling Directive). Given that the other Directives cover the energy performance of buildings and equipment the EED is designed to address energy savings opportunities that are not readily addressed by the other Directives. It has its origin in the preceding Energy Services Directive, which was repealed when the EED was adopted. The Energy Efficiency Directive establishes a set of binding measures intended to help the EU reach its 20% energy efficiency target by 2020. Under the Directive, all EU countries are required to use energy more efficiently at all stages of the energy chain from its production to its final consumption. EU countries were required to transpose the Directive's provisions into their national laws by 5 June 2014.
Regulatory Innovation Zones for Smart Energy NetworksLeonardo ENERGY
European RD&I Demonstration activities related to smart grids are key to test and validate the functionalities of new products and services in controlled but real environment. However, being the grid sector regulated the development and validation of innovative solutions is often slowed down.
Energy Transition needs innovation acceleration. Many of the changes needed are related to evolving relationship between the different energy stakeholders. Two main drivers foster innovation in the energy sector: demonstration and regulation. Demonstration enables to test new products and services in real environment, to fine-tune them and to measure their real impact; regulation defines the framework and the technical and economic relations between the different agents operating in the energy sector.
In this context, Regulatory Innovation Zones for Smart Energy Networks (or “Innovation Sandboxes”) are an opportunity to close that gap, speeding-up market uptake, while enabling European Regulatory Bodies to test various temporary schemes and mechanisms without modifying the regulatory framework.
Kostas STAMATIS
Directorate-General for Energy
European Commission
WORKSHOP: “DEFINING SMART GRIDS: CONDITIONS FOR SUCCESSFUL IMPLEMENTATION”
Session 1: Technical and regulatory aspects and recommendations for effective smart grids deployment under the provisions of the winter package
Barcelona, 9th February 2017
Organised by TR@NSENER Consortium.
TR@NSENER - European cooperation Network on Energy Transition in Electricity
Overview of the FlexPlan project. Focus on EU regulatory analysis and TSO-DSO...Leonardo ENERGY
Webinar recording at https://youtu.be/4s2GGlu-ylc
The FlexPlan project (https://flexplan-project.eu/) aims at establishing a new grid planning methodology making use of storage and flexible loads as an alternative to the build-up of new grid elements. After introducing the project, the webinar will focus on pan-European grid planning regulation and present practices of TSOs and DSOs.
Second Stakeholder Event for the Revision of Directive (REDII) 2018/2001
Session 2 Renewable energy in Heating and Cooling, Buildings and District Heating
Professor Brian Vad Mathiesen, Aalborg University
March 22, 2021, Brussels - Online
These are the supporting materials used by the different speakers of the H2020 WHY project opening session. This evento was held on September 10, 2020.
Auctions for energy efficiency and the experience of renewablesLeonardo ENERGY
Auctions are an emerging market-based policy instrument to promote energy efficiency that has started to gain traction in the EU and worldwide. This presentation provides an overview and comparison of several energy efficiency auctions and derives conclusions on the effects of design elements based on auction theory and on experiences of renewable energy auctions. We include examples from energy efficiency auctions in Brazil, Canada, Germany, Portugal, Switzerland, Taiwan, UK, and US.
A recording of this presentation can be viewed at:
https://youtu.be/aC0h4cXI9Ug
Energy efficiency first – retrofitting the building stock finalLeonardo ENERGY
Retrofitting the building stock is a challenging undertaking in many respects - including costs. Can it nevertheless qualify as a measure under the Energy Efficiency First principle? Which methods can be applied for the assessment and what are the results in terms of the cost-effectiveness of retrofitting the entire residential building stock? How do the results differ for minimization of energy use, CO2 emissions and costs? And which policy conclusions can be drawn?
This presentation was used during the 18th webinar in the Odyssee-Mure on Energy Efficiency Academy on February 3, 2022.
A link to the recording: https://youtu.be/4pw_9hpA_64
How auction design affects the financing of renewable energy projects Leonardo ENERGY
Recording available at https://youtu.be/lPT1o735kOk
Renewable energy auctions might affect the financing of renewable energy (RE) projects. This webinar presents the results of the AURES II project exploring this topic. It discusses how auction designs ranging from bid bonds to penalties and remuneration schemes impact financing and discusses creating a low-risk auction support framework.
This presentation discusses the contribution of Energy Efficiency Funds to the financing of energy efficiency in Europe. The analysis is based on the MURE database on energy efficiency policies. As an example, the German Energy Efficiency Fund is described in more detail.
This is the 17th webinar in the Odyssee-Mure on Energy Efficiency Academy.
Recordings are available on: https://youtu.be/KIewOQCgQWQ
(see updated version of this presentation:
https://www.slideshare.net/sustenergy/energy-efficiency-funds-in-europe-updated)
The Energy Efficiency First Principle is a key pillar of the European Green Deal. A prerequisite for its widespread application is to secure financing for energy efficiency investments.
This presentation discusses the contribution of Energy Efficiency Funds to the financing of energy efficiency in Europe. The analysis is based on the MURE database on energy efficiency policies. As an example, the German Energy Efficiency Fund is described in more detail.
This is the 17th webinar in the Odyssee-Mure on Energy Efficiency Academy.
Recordings are available on: https://youtu.be/KIewOQCgQWQ
This webinar analyses energy efficiency trends in the EU for the period 2014-2019 and the impact of COVID-19 in 2020 (based on estimates from Enerdata).
The speakers present the overall trend in total energy supply and in final energy consumption, as well as details by sector, alongside macro-economic data. They will explain the main drivers of the variation in energy consumption since 2014 and determine the impact of energy savings.
Speakers:
Laura Sudries, Senior Energy Efficiency Analyst, Enerdata
Bruno Lapillonne, Scientific Director, Enerdata
The recordings of the presentation (webinar) can be viewed at:
https://youtu.be/8RuK5MroTxk
Energy and mobility poverty: Will the Social Climate Fund be enough to delive...Leonardo ENERGY
Prior to the current soaring energy prices across Europe, the European Commission proposed, as part of the FitFor55 climate and energy package, the EU Social Climate Fund to mitigate the expected social impact of extending the EU ETS to transport and heating.
The report presented in this webinar provides an update of the European Energy Poverty Index, published for the first time in 2019, which shows the combined effect of energy and mobility poverty across Member States. Beyond the regular update of the index, the report provides analysis of the existing EU policy framework related to energy and transport poverty. France is used as a case study given the “yellow vest” movement, which was triggered by the proposed carbon tax on fuels.
Watch the recordings of the webinar:
https://youtu.be/i1Jdd3H05t0
Does the EU Emission Trading Scheme ETS Promote Energy Efficiency?Leonardo ENERGY
This policy brief analyzes the main interacting mechanisms between the Energy Efficiency Directive (EED) and the EU Emission Trading Scheme (ETS). It presents a detailed top-down approach, based on the ODYSSEE energy indicators, to identify energy savings from the EU ETS.
The main task consists in isolating those factors that contribute to the change in energy consumption of industrial branches covered by the EU ETS, and the energy transformation sector (mainly the electricity sector).
Speaker:
Wolfgang Eichhammer (Head of the Competence Center Energy Policy and Energy Markets @Fraunhofer Institute for Systems and Innovation Research ISI)
The recordings of this webinar can be watched via:
https://youtu.be/TS6PxIvtaKY
The Super-efficient Equipment and Appliance Deployment (SEAD) Initiative Prod...Leonardo ENERGY
The Super-efficient Equipment and Appliance Deployment (SEAD) Initiative Product Efficiency Call to Action, by Melanie Slade - IEA and Nicholas Jeffrey - UK BEIS
Towards a systems approach in Ecodesign and Energy Labelling: How to make the...Leonardo ENERGY
View recordings of the workshop at https://youtu.be/06U1MXlLaNs
It is widely recognised that there are substantial additional energy savings to be made from taking a system approach – considering how products are combined and operate together. However, political ambition has not resulted in regulation. During this workshop, policy makers and key stakeholders will discuss implementation barriers and explore possible remedies.
The European Copper Institute commissioned research to look into the experience with developing system related ecodesign and energy labelling regulations to date (Brocklehurst, 2021). In their review, the authors analysed the common characteristics and challenges related to ecodesign and energy labelling of eight product groups that, at least to some extent, go beyond a ‘simple’ product.
During this workshop, the authors will present the findings of their study. Policy makers will be invited to present their views on taking the systems approach in ongoing product regulation initiatives. During a debate, we will invite stakeholders to share their experiences and views on systems approach in product regulation. We will evaluate implementation barriers and explore possible remedies.
PRESENTATIONS
* Welcome and introduction (Diedert Debusscher, ECI)
* A review of systems approaches in Ecodesign and Energy Labelling (Fiona Brocklehurst, Ballarat Consulting)
* Transforming product efficiency policy into system efficiency policy (Hans-Paul Siderius, Netherlands Enterprise Agency)
* Views from the EU Commission (Ronald Piers De Raveschoot, ENER.B3)
* Case study: Pump systems (Michael Könen, Europump)
Motivation, benefits, and challenges for new photovoltaic material & module d...Leonardo ENERGY
The main objective of the IEA-PVPS Task 13 Report on “Designing New Materials for Photovoltaics: Opportunities for Lowering Cost and Increasing Performance through Advanced Material Innovations” is to provide a global survey of technical efforts aimed at lowering cost and increasing performance and reliability of PV modules by employing new designs, materials and concepts. Furthermore, the report aims to (1) increase the exchange of information about promising materials and design concepts, (2) provide the means for increasing the value of PV modules, (3) provide recommendations on characterization methods for new technologies and (4) give input regarding new requirements for standardization. This paper focuses on describing the motivation, benefits, and challenges for new photovoltaic material and module developments.
Lessons learnt from the EEA catalogue of environment and climate policy evalu...Leonardo ENERGY
The EEA catalogue of environment and climate policy evaluations is a database of about 600 evaluations. This webinar will present the objectives and contents of this catalogue, how it has been developed and what lessons can be learnt from this compilation.
ModulED. Next generation powertrains for electric vehiclesLeonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
ModulED aims at developing a new generation of modular electric engine based on buried-permanent magnet motor with reduced rare earth use, and electric drivetrain for various configurations of Full and Hybrid Electric Vehicles (including cost, environmental impact, efficiency, and mass manufacturing ready).
Drivemode Next Generation Electric Drivetrains for Fully Electric Vehicles Leonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
Integrated Modular Distributed Drivetrain for Electric & Hybrid Vehicles
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4
Ensuring European Energy Transition: key research and innovation actions needed for the next 5 years
1. Ensuring European Energy Transition:
key research and innovation actions needed for
the next 5 years
Energy Innovation Academy for Leonardo ENERGY
9 October 2017
Konstantin Staschus, Ph.D., Chair, ETIP SNET
ENTSO-E Chief Innovation Officer; Director, Ecofys – a Navigant company
Sophie Dourlens-Quaranta, Ph.D., Coordination of INTENSYS4EU Support Action
Director, Sustainable Electricity, Technofi
2. Outline
EU policy framework – a brief reminder
The ETIP-SNET: a platform addressing the energy system as a whole
The ETIP-SNET 2017-2020 R&I Implementation Plan
Structure of the Implementation Plan
Topics included in the Implementation Plan
Conclusions & next steps
3. The European energy policies – brief reminder
Main drivers of energy policies of the European Union (EU)
1. reduce GHG emissions,
2. security of supply and,
3. economic growth.
28 countries with different energy systems + Energy Community countries
Legal framework: the energy packages (EP)
• directives addressing the unbundling of the energy sector (gas and electricity) [1st EP, 90s],
• directives addressing the promotion of renewables and cross-border electricity exchanges + update
of the rules for the energy markets [2nd EP early 2000s],
• specific directives updating the common rules for the internal market in electricity and gas [3rd EP,
2009],
• Recast of the existing directives and regulations for putting energy efficiency first, achieving global
leadership in renewable energies and providing a fair deal for consumers [Clean Energy for all
Europeans package, 2016].
4. The European energy policies
The energy system has changed deeply and will keep changing:
• Many market players at wholesale and increasingly retail level: customers, prosumers, DER, generators,
traders, retailers, service providers, aggregators
• TSOs, DSOs, NRAs, ENTSO-E, ENTSOG, ACER, NEMOs/PXs
• Continued strong price drops in PV, wind, batteries
• Increasing sector coupling focus for decarbonisation of entire energy system (Paris COP 21)
• Digitalisation, platforms, the Energy Cloud, potential for peer-to-peer trading
An integrated European energy market,
• to best handle temporary, regional power surpluses and deficits due to fluctuating RES,
• provide consumers choice of suppliers and contracts for secure, sustainable and affordable energy,
which creates intensive R&I needs for the power system
• On markets and governance
• On digitalisation
• On flexibility and system integration with improved sector interfaces
• On the components of a flexible integrated system, i.e. transmission, distribution, storage, flex generation.
5. 2015: Energy Union – Priorities
• Energy security, solidarity and trust
• A fully integrated European energy market
• Energy Efficiency (EE) first
• Transition to a low-carbon society
• Research, Innovation and Competitiveness
European R&I energy policies
2008: The SET Plan -20 %
GHG
Emissions*
20%
Renewable
Energy
20 %
Energy
Efficiency**
Binding
• Individual technologies → Energy system
• Policy challenges
− Consumer at the centre
− Energy efficiency (demand)
− System optimisation
− Technologies (supply)
2014: Towards an Integrated Roadmap
-40 %
GHG
Emissions*
27%
Renewable
Energy
27 %
Energy
Efficiency**
Not binding
* Compared to 1990 ** compared to BAU
6. The New 2016 SET Plan key actions
1.Performant renewable technologies integrated in
the system
2.Reduce costs of renewable technologies
3.New technologies & services for consumers
4.Resilience & security of energy system
5.New materials & technologies for buildings
6.Energy efficiency for industry
7.Competitive in global battery sector (e-mobility)
8.Renewable fuels
9.Set up R&I activities applying CCS and CCU
10.Maintain safety level & improve efficiency
in nuclear energy
7. Outline
EU policy framework
The ETIP-SNET: a platform addressing the energy system as a whole
The ETIP-SNET 2017-2020 R&I Implementation Plan
Structure of the Implementation Plan
Topics included in the Implementation Plan
Conclusions & next steps
8. From a fragmented EU advisory
to an integrated framework
Main objective is to address the innovation challenges in
energy system and market evolution necessary for achieving
climate protection and renewables integration with
affordability and security of supply ... beyond smart electricity
grids: the whole energy system is to be addressed
A new focus on
innovation
implementation and
on sector coupling« EUROPEAN
TECHNOLOGY AND
INNOVATION
PLATFORM
SMART NETWORKS
FOR ENERGY
TRANSITION »
9. Set-out a vision for RD&I for Smart Networks for Energy Transition and engage
stakeholders in this vision
Prepare and update the Strategic Research and Innovation Roadmap
Report on the implementation of RD&I activities at European, national/regional
and industrial levels
Provide input to the SET Plan action 4 which addresses the technical challenges
raised by the transformation of the energy system
Identify innovation barriers, notably related to regulation and financing
Develop enhanced knowledge-sharing mechanisms that help bring RD&I results
to deployment
Prepare consolidated stakeholder views on Research and Innovation to European
Energy Policy initiatives
ETIP SNET’s mission
12. WG1: Reliable, economic and efficient smart grid system
WG1 addresses business and technology trends contributing to the overall energy system optimization at affordable
investment and operation costs.
WG2: Storage technologies and sector interfaces
WG2 addresses the technological and market developments related to energy storage solutions to ensure the required level
of flexibility for the transmission and distribution of electricity.
WG3: Flexible Generation
WG3 considers the latest business and technology trends to address the needs for flexibility in the framework of an
integrated energy system.
WG4: Digitisation of the electricity system and Customer participation
WG4 addresses the use and impact of the Information and Communication Technologies as a pervasive tool along the entire
value chain of the power generation, transportation and use.
WG5: Innovation implementation in the business environment
Work Group 5 adopts a helicopter view on R&I projects and promotes their uptake by the industry so as to ensure Europe’s
energy transition.
ETIP SNET’s Working Groups
13. Outline
EU policy framework
The ETIP-SNET: a platform addressing the energy system as a whole
The ETIP-SNET 2017-2020 R&I Implementation Plan
Structure of the Implementation Plan
Topics included in the Implementation Plan
Conclusions & next steps
14. Planning the R&I activities:
10-year roadmaps
EEGI roadmap
2013-2022:
Focus on electricity grids
and RES integration
ETIP SNET roadmap
2017-2026:
Integration of storage + other flexibilities
Integration with other energy networks
ETIP SNET roadmap
2020-2029:
To come by end 2019!
Roadmap
2020-2029
15. Setting the short-term priorities:
Implementation Plans (IPs)
EEGI roadmap
2013-2022
EEGI IP
2014-2016
Grid+Storage IP
2016-2018
Grid+Storage IP
2017-2019
ETIP SNET roadmap
2017-2026
ETIP SNET IP
2017-2020
Implementation Plan
2020-2022
Roadmap
2020-2029
ETIP SNET roadmap
2020-2029
ETIP SNET IP
2021-2023
16. Structure of the ETIP SNET Roadmap 2017-2026
Transmission
Flexible generation
Storage
& sector interfaces
Structure of the ETIP SNET Roadmap 2017-2026: overview
Distribution
Digitalisation
17. D1 D2 D3 D4 D5 D8 D9 D12 D13
Active
demand
response
Energy
efficiency from
integration with
smart homes
and buildings
System
integration of
small DER
System
integration of
medium DER
Integration of
storage in
network
management
Monitoring and
control of LV
network
Automation
and control of
MV network
New planning
approaches
and tools
Asset
management
D6 D7 D14 D10 D11
Infrastructure
to host
EV/PHEV –
Electrification
of transport
Integration
with other
energy
networks
Integration of
flexible
decentralised
thermal power
generation
Smart
metering data
processing and
other big data
applications
Cyber security
(system
approach)
C4 -Planning and asset
management
DISTRIBUTION SYSTEMS
C1 -Integration of smart
customers and buildings
C2 - Integration of decentralised
generation, demand, storage and
networks
C3 - Network operations
Structure of the ETIP SNET Roadmap 2017-2026: more details
Structure the ETIP SNET Roadmap 2017-2026
Transmission system
Distribution system
T1 T2 T5 T6 T7 T10 T11 T12 T15 T16 T18 T19
Optimal grid
planning
Smart asset
management
Grid
observability
Grid
controllability
Expert
systems and
tools
Storage
integration
Demand
response
RES forecast
Market-grid
integration
Business
models
Big data
management
Standardization
and data
exchange
T3 T4 T8 T9 T13 T14 T22 T17 T20
New materials
and
technologies
Environmental
challenges
and
stakeholders
Reliability and
resilience
Enhanced
ancillary
services
Flexible grid
use
Interaction
with non-
electrical
energy
networks
Flexible
thermal power
generation
Flexible
market design
Internet of
Things
C2 –Security and system stability
TRANSMISSION SYSTEMS
C1 – Modernization of the
network
C3 –Power system flexibility from
generation, storage, demand and network
C4 – Economic efficiency
of power system
C5 – Digitalization of power
system
18. Structure of the ETIP SNET roadmap 2017-2026: more details
D1 D2 D3 D4 D5 D8 D9 D12 D13
Active
demand
response
Energy
efficiency from
integration with
smart homes
and buildings
System
integration of
small DER
System
integration of
medium DER
Integration of
storage in
network
management
Monitoring and
control of LV
network
Automation
and control of
MV network
New planning
approaches
and tools
Asset
management
D6 D7 D14 D10 D11
Infrastructure
to host
EV/PHEV –
Electrification
of transport
Integration
with other
energy
networks
Integration of
flexible
decentralised
thermal power
generation
Smart
metering data
processing and
other big data
applications
Cyber security
(system
approach)
C4 -Planning and asset
management
DISTRIBUTION SYSTEMS
C1 -Integration of smart
customers and buildings
C2 - Integration of decentralised
generation, demand, storage and
networks
C3 - Network operations
T1 T2 T5 T6 T7 T10 T11 T12 T15 T16 T18 T19
Optimal grid
planning
Smart asset
management
Grid
observability
Grid
controllability
Expert
systems and
tools
Storage
integration
Demand
response
RES forecast
Market-grid
integration
Business
models
Big data
management
Standardization
and data
exchange
T3 T4 T8 T9 T13 T14 T22 T17 T20
New materials
and
technologies
Environmental
challenges
and
stakeholders
Reliability and
resilience
Enhanced
ancillary
services
Flexible grid
use
Interaction
with non-
electrical
energy
networks
Flexible
thermal power
generation
Flexible
market design
Internet of
Things
TRANSMISSION SYSTEMS
C1 – Modernization of the
network
C2 –Security and system stability
C3 –Power system flexibility from
generation, storage, demand and network
C4 – Economic efficiency
of power system
C5 – Digitalization of power
system
Transmission system
Distribution system
Functional objectives with at least some aspects related to storage
Structure the ETIP SNET roadmap 2017-2026
19. Structure of the ETIP SNET roadmap 2017-2026: more details
Transmission system
Distribution system
Functional objectives with at least some aspects related to storage
Functional objectives related to sector interfaces
T1 T2 T5 T6 T7 T10 T11 T12 T15 T16 T18 T19
Optimal grid
planning
Smart asset
management
Grid
observability
Grid
controllability
Expert
systems and
tools
Storage
integration
Demand
response
RES forecast
Market-grid
integration
Business
models
Big data
management
Standardization
and data
exchange
T3 T4 T8 T9 T13 T14 T22 T17 T20
New materials
and
technologies
Environmental
challenges
and
stakeholders
Reliability and
resilience
Enhanced
ancillary
services
Flexible grid
use
Interaction
with non-
electrical
energy
networks
Flexible
thermal power
generation
Flexible
market design
Internet of
Things
TRANSMISSION SYSTEMS
C1 – Modernization of the
network
C2 –Security and system stability
C3 –Power system flexibility from
generation, storage, demand and network
C4 – Economic efficiency
of power system
C5 – Digitalization of power
system
D1 D2 D3 D4 D5 D8 D9 D12 D13
Active
demand
response
Energy
efficiency from
integration with
smart homes
and buildings
System
integration of
small DER
System
integration of
medium DER
Integration of
storage in
network
management
Monitoring and
control of LV
network
Automation
and control of
MV network
New planning
approaches
and tools
Asset
management
D6 D7 D14 D10 D11
Infrastructure
to host
EV/PHEV –
Electrification
of transport
Integration
with other
energy
networks
Integration of
flexible
decentralised
thermal power
generation
Smart
metering data
processing and
other big data
applications
Cyber security
(system
approach)
C4 -Planning and asset
management
DISTRIBUTION SYSTEMS
C1 -Integration of smart
customers and buildings
C2 - Integration of decentralised
generation, demand, storage and
networks
C3 - Network operations
Structure the ETIP SNET roadmap 2017-2026
20. Structure of the ETIP SNET roadmap 2017-2026: more details
Transmission system
Distribution system
Functional objectives with at least some aspects related to storage
Functional objectives related to sector interfaces
Functional objectives related to digitalisation
T1 T2 T5 T6 T7 T10 T11 T12 T15 T16 T18 T19
Optimal grid
planning
Smart asset
management
Grid
observability
Grid
controllability
Expert
systems and
tools
Storage
integration
Demand
response
RES forecast
Market-grid
integration
Business
models
Big data
management
Standardization
and data
exchange
T3 T4 T8 T9 T13 T14 T22 T17 T20
New materials
and
technologies
Environmental
challenges
and
stakeholders
Reliability and
resilience
Enhanced
ancillary
services
Flexible grid
use
Interaction
with non-
electrical
energy
networks
Flexible
thermal power
generation
Flexible
market design
Internet of
Things
TRANSMISSION SYSTEMS
C1 – Modernization of the
network
C2 –Security and system stability
C3 –Power system flexibility from
generation, storage, demand and network
C4 – Economic efficiency
of power system
C5 – Digitalization of power
system
D1 D2 D3 D4 D5 D8 D9 D12 D13
Active
demand
response
Energy
efficiency from
integration with
smart homes
and buildings
System
integration of
small DER
System
integration of
medium DER
Integration of
storage in
network
management
Monitoring and
control of LV
network
Automation
and control of
MV network
New planning
approaches
and tools
Asset
management
D6 D7 D14 D10 D11
Infrastructure
to host
EV/PHEV –
Electrification
of transport
Integration
with other
energy
networks
Integration of
flexible
decentralised
thermal power
generation
Smart
metering data
processing and
other big data
applications
Cyber security
(system
approach)
C4 -Planning and asset
management
DISTRIBUTION SYSTEMS
C1 -Integration of smart
customers and buildings
C2 - Integration of decentralised
generation, demand, storage and
networks
C3 - Network operations
Structure the ETIP SNET roadmap 2017-2026
21. Structure of the ETIP SNET Roadmap 2017-2026: Details
Transmission system
Distribution system
Functional objectives with at least some aspects related to storage
Functional objectives related to sector interfaces
Functional objectives related to digitalisation
Functional objectives related to flexible thermal generation
T1 T2 T5 T6 T7 T10 T11 T12 T15 T16 T18 T19
Optimal grid
planning
Smart asset
management
Grid
observability
Grid
controllability
Expert
systems and
tools
Storage
integration
Demand
response
RES forecast
Market-grid
integration
Business
models
Big data
management
Standardization
and data
exchange
T3 T4 T8 T9 T13 T14 T22 T17 T20
New materials
and
technologies
Environmental
challenges
and
stakeholders
Reliability and
resilience
Enhanced
ancillary
services
Flexible grid
use
Interaction
with non-
electrical
energy
networks
Flexible
thermal power
generation
Flexible
market design
Internet of
Things
TRANSMISSION SYSTEMS
C1 – Modernization of the
network
C2 –Security and system stability
C3 –Power system flexibility from
generation, storage, demand and network
C4 – Economic efficiency
of power system
C5 – Digitalization of power
system
D1 D2 D3 D4 D5 D8 D9 D12 D13
Active
demand
response
Energy
efficiency from
integration with
smart homes
and buildings
System
integration of
small DER
System
integration of
medium DER
Integration of
storage in
network
management
Monitoring and
control of LV
network
Automation
and control of
MV network
New planning
approaches
and tools
Asset
management
D6 D7 D14 D10 D11
Infrastructure
to host
EV/PHEV –
Electrification
of transport
Integration
with other
energy
networks
Integration of
flexible
decentralised
thermal power
generation
Smart
metering data
processing and
other big data
applications
Cyber security
(system
approach)
C4 -Planning and asset
management
DISTRIBUTION SYSTEMS
C1 -Integration of smart
customers and buildings
C2 - Integration of decentralised
generation, demand, storage and
networks
C3 - Network operations
Structure of the ETIP SNET Roadmap 2017-2026
22. Structuring the short-term priorities according to
the broaden scope of the ETIP SNET
Structure of the WGs
inputs to the IP
WG1
WG2
WG3
WG4
Transmission
Distribution
Storage & sector
interfaces
Flexible
generation
Digitalisation
Transmission
Flexible
generation
Storage
& sector
interfaces
Structure the ETIP
SNET roadmap
Distribution
Digitalisation
Final structure of the IP
Improved components of the
energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with improved
interfaces between energy
system components
56 topics 39 topics
23. Structuring the short-term priorities according to
the broaden scope of the ETIP SNET
Final structure of the IP
Improved components of the
energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with improved
interfaces between energy
system components
24. Structuring the short-term priorities according to
the broaden scope of the ETIP SNET
Final structure of the IP
Improved components of the
energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with improved
interfaces between energy
system components
25. Structuring the short-term priorities according to
the broaden scope of the ETIP SNET
Final structure of the IP
Improved components of the
energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with improved
interfaces between energy
system components
26. Structuring the short-term priorities according to
the broaden scope of the ETIP SNET
Final structure of the IP
Improved components of the
energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with improved
interfaces between energy
system components
27. Outline
EU policy framework
The ETIP-SNET: a platform addressing the energy system as a whole
The ETIP-SNET 2017-2020 R&I Implementation Plan
Structure of the Implementation Plan
Topics included in the Implementation Plan
Conclusions & next steps
28. The ETIP SNET Implementation Plan
2017-2020
Improved components of
the energy system
High-RES and empowered end-
user energy system:
governance and market design
Digitalisation of the energy
system
Integrated grid with
improved interfaces
between energy system
components
3 topics GOVERNANCE & MARKET
DESIGN OF THE ENERGY SYSTEM
6 topics DIGITALISATION
2 topics ELEC-HEAT
1 topic ELEC-GAS
3 topics TRANSMISSION-STORAGE
2 topics DISTRIBUTION-STORAGE
3 topics GENERATION-STORAGE
7 topics TRANSMISSION
2 topics DISTRIBUTION
2 topics STORAGE
7 topics GENERATION
+ 1 joint T-D
29. High-RES and empowered end-user energy system:
governance and market design
Organization of the operations of the energy system, associated interactions between the different
stakeholders and market rules (integration of renewables and empowering prosumers)
o Topic 1: a more efficient IEM accounting for grid flexibility, market integration of RES and
associated services, and explicit modelling of uncertainties to increase cross-border exchange
o Topic 2: flexibility market concept that allows the trading of ‘heterogeneous’ flexibility products
(coupling electricity, heat and gas markets, both at the wholesale and retail level)
o Topic 3: solutions to re-organize the respective roles and interactions of all stakeholders of the
energy system, and define the technical interfaces
30. Focus on topic 2: heterogeneous flexibility
products
Specific challenge
o New flexibility (energy storage, cross-border interconnectors, EVs, DR, interfaces between energy networks , etc.)
products to be introduced in the balancing market.
o New design allowing the trading of the different flexibility products, especially different energy markets (electricity,
gas and, where existing, heat) when there is a conversion in the energy carriers (e.g. P2G).
o Facilitate and increase the liquidity of the flexibility market and increase the demand for flexibility, all
heterogeneous flexibility users and products to be combined under a new flexibility market concept.
Target TRL: 3-5
Estimated budget: 10 M€
Expected outcomes
o Expected project outputs are flexibility market concept ready for integration and implementation within the current
energy markets across the EU.
31. Digitalisation of the energy system
Smart networks, thanks to a full digitalization of the power system (energy system) allow the enhanced monitoring,
automation and control of the existing networks while ensuring that all involved stakeholders can interact
o Topic 4: overview of the development of a suitable ICT infrastructure, data availability and common
standards for data exchange which will help to connect efficiently network operators and market players
o Topic 5: design and the demonstration of specific ICT solutions for market players
o Topic 6: design and demonstration of specific ICT solution, with the associated business models, allowing
the end-users’ participation in energy markets
o Topic 7 : specify and demonstrate for the future energy system the digital technologies ensuring system
reliability
32. Digitalisation of the energy system
The full digitalisation of the energy system will bring new opportunities (e.g. Internet of Things -IoT) and
challenges (e.g. cybersecurity) which are addressed in two topics:
o Topic 8: how to make use of IoT and data mining techniques (big data) to develop smart asset
management strategies;
o Topic 9: assess in depth cybersecurity issues and propose solutions so as to maintain the system
robust against possible cyber threats.
33. Focus on topic 8: Big Data, IOT and IIOT
Specific challenge
o Identification of possibilities, digital issues and market opportunities related to big data and IOT and the
energy system
Target TRL: 5-9
Estimated budget: 20 M€
Expected outcomes:
o Understanding and development of technologies, related to Big data, IOT , IIOT and interfaces, enabling full
functioning smart grid system
34. Integrated grid with improved interfaces
between energy system components
Synergies between electricity and heat systems
Synergies between electricity and gas
Synergies between electricity transmission
networks, generation and storage
Synergies between electricity distribution
networks and their interfaces
Coupling between flexible generation and
storage
35. Synergies between electricity and heat systems. Focus on
topic 11: Increase energy efficiency by utilising excess heat
from other processes via heat networks and thermal storage
Specific challenge
o More excess heat is being wasted around Europe from power plants, industry, and waste incineration than
required to heat all buildings in Europe. Only a small amount of this excess heat is currently being utilised
(~10%). The aim of topic 11 is to create projects that accelerate the use of excess heat and by doing so, replace
the use of fossil fuels such as oil and natural gas.
Target TRL: 4-6
Estimated budget: 10 M€
Expected outcomes
o Energy and carbon dioxide savings by replacing fossil fuels with excess and renewable heat
o Improved security of supply due to a reduction of fossil fuel imports
o Faster deployment of proven thermal storage technologies by identifying, designing, and promoting new
projects around Europe
36. Synergies between electricity and gas
Focus on topic 12: coupling of electricity and
gas sectors
Specific challenge
o The existing gas network could become obsolete (decreasing demand from households). Instead of dismantling in
some cases, the challenge is to find a new role of the existing network as part of a Power-to-gas solution (methane,
hydrogen, etc.) which offers an additional coupling between energy sectors and which has significant benefits in
terms of increased renewable integration, flexibility options, optimized operation, long-term large-scale storage
possibilities
Target TRL: 4-8
Estimated budget: 30 M€
Expected outcomes
o Estimation of market size, opportunities
o Economic and technical feasibility
o Business models
o Demonstration of this type of storage. Network operators can use the results to promote generation with storage,
so the investments in the electricity grid can be reduced
37. Improved components of
the energy system
Joint transmission and distribution issues
Transmission networks
Distribution networks
38. Focus on topic 21: Smart asset management using innovative
hardware and software
Specific challenge
o Assets are exposed to new operating conditions and patterns. Maintenance becomes key to ensure the proper
performance of the assets and improve each of the four link in the value chain: 1) lifetime prediction modelling, 2)
definition of new and reliable monitoring systems, 3) specifying and developing new workable frameworks and 4)
demonstrating implementation, scaling up and replication at effective cost.
Target TRL: 6-8
Estimated budget: 14 M€
Expected outcomes
o New approaches for extending lifetime of existing power components based on improved monitoring,
measurements and models to determine their health and remaining lifetime in the future
o Novel approaches for managing critical assets based on probabilistic risk assessment and optimization of
maintenance planning
39. Focus on topic 26: Cross-border use of ancillary and flexibility
services
Specific challenge
o The cross-border use of ancillary and flexibility
services plays a key role in the most cost effective
way since they increase system’s stability ensuring
at the same time a smoother transition to the large
penetration of RES.
Target TRL: 5-8
Estimated budget: 10 M€
Expected outcomes
o New market-design proposal, prototypes, and simulation tools.
o Demonstration of effective solutions for cross-border exchange of ancillary services.
40. Focus on topic 29: Innovative approach for grid operation
Specific challenge
o Smart meter roll-out will result in the collection of large amounts of data that can enhance grid operation on one
side and will necessitate large adaptation of information systems on the other side. In addition to this, electronics
industry offers innovative solutions that can improve grid operation optimising network flexibility and facilitating
the integration of renewable generation on distribution networks.
Target TRL: 5-8
Estimated budget: 40 M€
Expected outcomes
o Demonstration of benefits (operational, planning) thanks to improved data analytics (AI, machine learning…) and
data collection and processing
o Tools to adequately process big data and related architecture
o Execution of pilot projects with field test environments including the implementation of platforms in real life trials
o Increased distribution system flexibility, stability and security achieved also through improved system design
41. Improved components of
the energy system
Storage units
Thermal generation
Variable RES
Hydro plants
Cross-cutting topic
42. Focus on topic 31: Advanced energy storage technologies for
energy and power applications
Specific challenge
o Energy storage technologies for energy and power applications, such as balancing, seem to be still far to meet
technical and economic targets. The principal challenges to focus on are: identify use cases of storage in the various
services it may provide to the grid, cost competitive energy storage technology, validated reliability and safety,
equitable regulatory environment.
Target TRL: 4-8
Estimated budget: 30 M€
Expected outcomes
o Demonstrations in an operational environment
o Energy storage solutions to be broadly deployed for decarbonising the European economy and ensuring the
energy transition
43. Focus on topic 33: Developing the next generation of flexible
thermal power generation
Specific challenge
o Component improvements
o Improved operational flexibility
o Overall performance improvements (efficiency and emissions) at part load
o Enhanced thermal power plant robustness (reduce maintenance and repair costs)
o Enable multi fuel operation
o Novel monitoring and control
o Digitization
Target TRL: 3-7
Estimated budget: 65 M€
Expected outcomes
o Technology developments and/or pilot or plant demonstration of thermal power plant flexibility improvement
achieved by candidate hardware adaptations and control system up-grades. Projects could also provide
recommendations on best practices for new plans in the future.
44. Focus on topic 35: Improved flexibility and service capabilities of
RES to provide the necessary ancillary services
Specific challenge
o Improvement of renewable generators for better adaptation for provision of ancillary services
o New control strategies with support services like storage and manageable RES
o Instability mitigation of RES, new strategies to define stability criteria in future scenarios
o Investigate different energy mix configurations to ensure electrical system stability
o Communication protocols with storage systems with PEC
Target TRL: 3-6
Estimated budget: 25-30 M€
Expected outcomes
o RES generators supporting the path towards a 100% RES electrical system with ancillary services provided by
RES while ensuring the stability and reliability of the grid.
45. Outline
EU policy framework
The ETIP-SNET: a platform addressing the energy system as a whole
The ETIP-SNET 2017-2020 R&I Implementation Plan
Structure of the Implementation Plan
Topics included in the Implementation Plan
Conclusions & next steps
46. Market Digitalisation Interfaces Grids Storage Generation
Comments not requiring a
special focus or agreeing
the topic in question
Comments requiring a
special focus
The ETIP SNET Implementation Plan 2017-2020 was submitted to public consultation:
• Great interest generated: 70 answers received!
• The document received general support from the stakeholders
• 500+ comments were addressed methodically by the INTENSYS4EU team
Conclusions
47. Next steps in the ETIP SNET process
hierarchy
EC work
programme
ETIP SNET IPs
3-year R&I needs
(2021-2023)
ETIP SNET 10-year R&I needs
Roadmap 2020-2029
ETIP-SNET energy system vision +
scenarios (2030 -2050)
ETIP SNET experts (WGs)
• Member States
• ETIP SNET experts (WGs)
• Public consultations
• Regional workshops
• Monitoring of projects
EC consultation process
March
2018
End
2019
End
2020
48. Want to have your say in ETIP SNET
activities?
WG membership evolves over the years
Regional workshops are organised to collect future
R&I needs identified by national and regional projects
• First two workshops successfully held in Aachen (18-19
September) and Lisbon (28-29 September)!
• Registration open soon for the last two regional
workshops of the year: Cyprus 23-24 November and Riga
7-8 December Keep updated at https://www.etip-
snet.eu/regional-workshops/
Next regional workshops in 2018: dates and locations
to be defined
Public consultations will be organised
• ETIP SNET Roadmap 2020-2029
• ETIP SNET Implementation Plan (2021-2023)
49. Thank you for your
attention
More information:
etip-snet.eu
info@etip-snet.eu
@etipsnet
linkedin.com/groups/8208338