This document is a resume for Ahmed Naeim Kamel Mohamed. It lists his contact information, objective of seeking a challenging position, qualifications including 5 years of experience in plumbing and fire protection engineering and expertise in various design software. It details his fields of experience and career history working on projects in Egypt and Saudi Arabia. The resume aims to showcase the candidate's qualifications for engineering roles.
Around Three decades of experience in structural design, supervision, Construction and management in Egypt and Saudi Arabia. PMI membership since Sep 2014, PMP Certified expected by the end of 2015, Master of Engineering in Construction Management by Dec, 2015. Remarkable governmental experience as a Vice General Manager in Directorate of Housing & Utilities, Ministry of Housing, Egypt till Dec. 2006, and Manager of projects for Rasheed Al Owaidah & Sons company Ltd., Riyadh, KSA till Oct 2009, then Resident Engineer/Project Manager in Saudi Diyar Consultants, Riyadh, KSA till Feb 2015, Currently I’m the Head of Supervision Department, at IMAR, Urban Consultants, Riyadh, KSA.
Dear Sir/Madam
I am a civil site engineer with 4 years work experienced
in the construction field & (electrical)as a civil site Engineer at UAE.
I request your good self to give me an opportunity to prove my
capabilities in your organizations. I assure you that I shall give my
best in getting in the job accomplished. My CV is enclosed herewith
for your kind perusal.
Expecting a favorable response from your end.
Thanks and regards.
Best Regards
Madhu Ravi
(+971-509027107)-(+971-558235824)
RAMASAMY (NACE CERTIFIED CP LEVEL II ENGINEER)RAMA SAMY
Electrical Engineer with around 7 years’ experience in Site Management and QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On- shore, Off- shore & Well head .
Around Three decades of experience in structural design, supervision, Construction and management in Egypt and Saudi Arabia. PMI membership since Sep 2014, PMP Certified expected by the end of 2015, Master of Engineering in Construction Management by Dec, 2015. Remarkable governmental experience as a Vice General Manager in Directorate of Housing & Utilities, Ministry of Housing, Egypt till Dec. 2006, and Manager of projects for Rasheed Al Owaidah & Sons company Ltd., Riyadh, KSA till Oct 2009, then Resident Engineer/Project Manager in Saudi Diyar Consultants, Riyadh, KSA till Feb 2015, Currently I’m the Head of Supervision Department, at IMAR, Urban Consultants, Riyadh, KSA.
Dear Sir/Madam
I am a civil site engineer with 4 years work experienced
in the construction field & (electrical)as a civil site Engineer at UAE.
I request your good self to give me an opportunity to prove my
capabilities in your organizations. I assure you that I shall give my
best in getting in the job accomplished. My CV is enclosed herewith
for your kind perusal.
Expecting a favorable response from your end.
Thanks and regards.
Best Regards
Madhu Ravi
(+971-509027107)-(+971-558235824)
RAMASAMY (NACE CERTIFIED CP LEVEL II ENGINEER)RAMA SAMY
Electrical Engineer with around 7 years’ experience in Site Management and QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On- shore, Off- shore & Well head .
BIM Designer having 6 years of professional experience in design, modeling and coordination of commercial,residential, hospital projects seeking for a better opportunity.
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
I am an AUTODESK Certified professional REVIT 2014, Senior CAD Technician (Plumbing & Fire Fighting), having more than 18 years of experience with various Reputed consultancies and contracting companies and MNCs in India, Singapore, Dubai and Kuwait, drafting design drawings, detailed engineering contracting drawings, as-built drawings for Plumbing and Fire Fighting systems, using AutoCad and Revit softwares for.many industrial projects, high-rise residential & office towers, Schools, Colleges, Multi-purpose complexes, Hotels, Airports, Sub-stations, Plant rooms, etc.
Well versed in AutoCAD & Revit 2014 and MS office.
Specialties: Expertise in design & drafting of Plumbing & Fire Protection systems, preparing equipment layoutS, Piping layoutS, Plant roomS, External Piping layout, Standard details, schematic diagrams, Sections & riser diagrams from Concept stage of the project through Tender stages.
Eng Ahmed Naeim CV ( Mechanical Engineer ) (may 2016 )
1. Ahmed Naeim Kamel Mohamed
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
13, Worker St. – Almaza, Cairo, Egypt
Mobile: +2 0102 6050430 , +2 01116434176
E-mail : eng.ahmed.naeim2010@gmail.com
: eng.ahmed.naeim2011@gmail.com
OBJECTIVE
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Seeking challenging position with a Multinational or International Organization, where I can fully apply
my skills through my education and work experience, having strong motive for learning and working.
SUMMARY OF QUALIFICATIONS
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Plumbing/ Fire Protection engineer with 5 years of experience in various large scale projects and
piping engineer With one year , Team leader or member in the production of tender drawings for large
scale projects, having the following abilities:
Assigning uniform work load distribution among team members.
Revising projects drawings and calculations in order to guarantee satisfactory technical and
presentation quality.
supervising, following-up and participating in the Preparation of Preliminary and Final Design Tender
Drawings, Documents and Calculation Sheets.
Having almost full awareness along with years of experience dealing with international codes and
references as NFPA, UPC, IPC, ASPE, HTM 0201 and Saudi Building Code (SABC).
Expertise in AutoCAD, ELITE fire protection program, Microsoft office (Excel and Word) Revit MEP,
Navisworks and PDMS (Piping software).
FIELDS OF EXPERIENCE
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Within these 6 years of experience, I became fully aware of the following fields for any type of projects:
Water Supply works (internal and external works).
Water Drainage works (internal and external one pipe and two pipe systems).
Fire Protection works (water based sprinklers, clean agent).
Irrigation works (sprinklers, Bubblers, Emitters).
Swimming pools, Jacuzzi and fountains works.
Liquefied Petroleum Gas Systems, Piping and Central LPG Storage Tanks and Networks.
BIM (building information modeling) with (REVIT MEP and Navisworks) programs for MEP working.
HVAC designer with (HAP) program.
Piping design and stress analysis with (PDMS and Caepipe) programs.
Plumbing, Firefighting and HVAC site engineer.
Shop drawing layouts with (Revit, Navisworks with zero Clashes and AutoCAD) Programs.
CAREER HISTORY
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
SaudConsult Service (SC). (Egypt Branch) (Current Job since Dec 2014).
O Position and duties:
I was assigned as Plumbing and Fire Protection engineer for:
Plumbing and fire protection designer of all kind of buildings using
different systems, programs and codes.
Full coordination with architectural, HVAC and electrical disciplines.
Preparing projects drawings and calculations in order to guarantee
satisfactory technical and presentation quality.
Design and shop drawing projects with Revit MEP and AutoCAD.
2. Designed swimming pools, Jacuzzi and fountains.
Coordination with the design team that consisted of engineers and a draft
man to deliver projects.
Prepared technical bills, and design drawings.
Zuhair Fayez Partnership Consultant (ZF). (Egypt Branch)
(Part time Job for 2 months 2015). (BIM engineer)
BIM Designer, Plumbing and fire protection designer of Airports projects in
Saudi Arabia using different systems With Revit and AutoCAD programs.
Genesis Engineering , Consultant. (Egypt Branch)
(Part time Job for 2 months 2016). (BIM engineer)
BIM Designer for Plumbing and fire protection design engineer in King
Khaled University project in Saudi Arabia using different systems With
Revit and AutoCAD programs.
Saudi Diyar Consultant (SDC). (Egypt Branch) (From March 2013 to Dec 2014).
O Position and duties:
I was assigned as Plumbing and Fire Protection Engineer for:
Preparation of Preliminary and Final Design Tender Drawings and
Documents in addition to Providing Fully Computerized Calculation
Sheets.
Support engineering design team to execute various engineering design
projects.
Work coordination with other disciplines.
Design of Equipment Planning (heaters, pumps, tanks ....) and utility
systems for kitchens, laundries, fountains and swimming pools.
Kemet Corporation. (From Jan 2013 – to March 2014)
O Position and duties:
I was assigned as BIM, MEP Engineer for:
BIM for MEP engineer, create a model for (plumbing, firefighting, HVAC
and electrical), coordinator, solve clashes between disciplines and
prepared bills (B.O.Q).
Determined Supports locations, dimensions and, bills (B.O.Q) and create
an RFI.
EVRMAC Company. (From Dec 2011 – to Jan 2013)
O Position and duties:
I was assigned as Piping Design Engineer for:
Design and modification of some piping systems in power plants "simple
cycles or Combined" Buildings per standard code (ASME B31.1_2007) by
PDMS, to release isometric issue for Approval Contains bill of materials
(BOM) and if design ok then release issue for Construction.
Stress analysis of pipeline if temperature of flow during operating more
than204ºC by Caepipe, taking Accounts movement of wind and seismic.
ORASCOM Company for construction and industrial. (From July 2009 – to Oct 2009).
O Position and duties:
I was assigned as Plumbing, Firefighting and HVAC Site
Assistance Engineer for:
Follow up and assist in the implementation of HVAC, firefighting and
plumbing systems in site.
Create follow up reports to the manager.
3. PROJECTS PERFORMED
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
king Khaled Medical University in Saudi Arabia (Tehama, bisha) (BIM Project).
Several airports in Saudi Arabia (BIM Projects).
Capital Gardens compound With PALM Hills in new Cairo , Egypt
King Faisal Air Academy (KFAC) with (269, 6 km2) Saudi Arabia (Majma'ah).
Dammam University, Saudi Arabia (Dammam).
Redesign of one million square meters of Ministry of Interior (KAP-03) buildings (more than 43
different and high security projects), Saudi Arabia (all kingdom).
University of Science & Arts, Saudi Arabia (al Baha).
Holy Mosque, Shamiya Extension project, Saudi Arabia (Makah) (BIM Project).
Holy Mosque, Makah Hospital, Saudi Arabia (Makah) (BIM Project).
Holy Mosque, Service building, Saudi Arabia (Makah) (BIM Project).
Feed Water Modification System in Abu Sultan Power Plant, (Egypt).
Various residential compounds, office buildings and private villas.
TEACHING HISTORY
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
I am teaching REVIT MEP, NAVIS WORKS programs:
EGYCET and EGC centers, Hassan Alam Sons Company and some private
courses.
I am teaching PDMS program:
Engineering house center and some private courses.
EDUCATION
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
UNIVERSITY: Cairo University (2005-2010)
Bachelor degree in mechanical Engineering (power Department).
Graduated project - mechanical power applications.
Project grade: Excellent.
Overall grade: very good with honor.
COMPUTER SKILLS
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
DESIGN AND DRAFTING:
AutoCAD (Excellent skills).
Elite fire Protection (Excellent skills).
Revit (Excellent skills).
PDMS (Excellent skills).
Solid works (fair).
MICROSOFT OFFICE):
Word, power point, Excel and Outlook (Excellent skills).
WINDOWS:
all types of Windows systems.
LANGUAGES
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Arabic: Native language English: Fluent (speaking, reading and writing)
4. TRANING & COURSES
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
At EGYCET for 8 Weeks.
1. Water Supply, Drainage System & Swimming Pools.
2. Fire Fighting Systems.
INTERNSHIPS
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
1. Petro Gas Company (July 2009-July 2009, Cairo, Egypt).
2. Arab contractors company (Osman Ahmed Osman) (Aug2009 -Aug2009).
3. EZZ Iron (Sep 2009 – Sep 2009).
REFERENCES
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
References Valid upon request
AVAILABILITY
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Available after within one month from signing new contract as per my current job contract conditions.