U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and run application
code.
U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and run application
code.
Have a quick overview of most of the embedded linux components and their details. How ti build Embedded Linux Hardware & Software, and developing Embedded Products
Linux Kernel Booting Process (1) - For NLKBshimosawa
Describes the bootstrapping part in Linux and some related technologies.
This is the part one of the slides, and the succeeding slides will contain the errata for this slide.
The conversion of the ARM Linux kernel over to the Device Tree as the mechanism to describe the hardware has been a significant change for ARM kernel developers. Nowadays, all developers porting the Linux kernel on new ARM platforms, either new SOCs or new boards, have to work with the Device Tree. Based on practical examples, this talk intends to provide a ""getting started guide"" for newcomers in the Device Tree world: what is the Device Tree? How is it written and compiled? How do the bootloader and kernel interact? How are Device Tree bindings written and documented? What are the best practices for writing Device Trees and their bindings?
Video available at https://www.youtube.com/watch?v=m_NyYEBxfn8.
This presentation is about U-Boot: the most popular open source, primary boot loader used in embedded devices, as well as it's mechanisms and features.
The respective talk was held by Sam Protsenko (Software Engineer, Consultant, GlobalLogic) at GlobalLogic Mykolaiv Embedded TechTalk #1 on May 25, 2018.
U-Boot project has evolved in the time span of over 17 years and so as its complexity and its uses. This has made it a daunting task in getting started with its development and uses. This talk will address all these issues start with overview, features, efforts created by community and future plans.
The U-Boot project has evolved in the time span of over 17 years and so as its complexity and its uses. This has made it a daunting task in getting started with its development and uses. This talk will address all these issues and share development efforts created by the U-Boot community.
In this talk Jagan Teki(Maintainer for Allwinner SoC, SPI, SPI FLASH Subsystems) will introduce U-Boot from scratch with a brief overview of U-Boot history, U-Boot Proper, SPL, TPL, Build process and Startup sequence. He will talk about other preliminaries such as Image booting, Falcon Mode, Secure Boot and U-Boot features like device tree, device overlays, driver model and DFU, etc.
Once giving enough introduction, he will also talk about steps to port U-Boot to new hardware with a demo, along with U-Boot testing process. Finally, he will address and review ongoing development work, issues and future development regarding U-Boot.
Bootloader utilizes to program microcontrollers by providing a medium of communication between them. Hence small bootloader uses to make controller programmable very often as like Arduino series board. Microcontrollers like 8051, PIC without bootloader requires the external programmer to burn the program inside the memory of the microcontroller. In addition to it requires preciously control output states of various pin mode which should be in sequence according to the datasheet of the manufacturer. Here this PPT has portrayed as an example of idle configurations that requires to run the bootloader and what happens if the bootloader is installed inside the memory of the controller.
Linux Kernel Platform Development: Challenges and InsightsGlobalLogic Ukraine
This presentation is about the main tasks which Linux kernel platform engineers take care of. The talk includes real-life cases which help understand the role of respective specialists and might be helpful to those who consider such change in their careers.
The talk was delivered by Sam Protsenko (Software Engineer, Consultant, GlobalLogic) at GlobalLogic Embedded Career Day #2 on February 10, 2018.
More about GlobalLogic Embedded Career Day #2: https://www.globallogic.com/ua/events/globallogic-kyiv-embedded-career-day-2-materials
Have a quick overview of most of the embedded linux components and their details. How ti build Embedded Linux Hardware & Software, and developing Embedded Products
Linux Kernel Booting Process (1) - For NLKBshimosawa
Describes the bootstrapping part in Linux and some related technologies.
This is the part one of the slides, and the succeeding slides will contain the errata for this slide.
The conversion of the ARM Linux kernel over to the Device Tree as the mechanism to describe the hardware has been a significant change for ARM kernel developers. Nowadays, all developers porting the Linux kernel on new ARM platforms, either new SOCs or new boards, have to work with the Device Tree. Based on practical examples, this talk intends to provide a ""getting started guide"" for newcomers in the Device Tree world: what is the Device Tree? How is it written and compiled? How do the bootloader and kernel interact? How are Device Tree bindings written and documented? What are the best practices for writing Device Trees and their bindings?
Video available at https://www.youtube.com/watch?v=m_NyYEBxfn8.
This presentation is about U-Boot: the most popular open source, primary boot loader used in embedded devices, as well as it's mechanisms and features.
The respective talk was held by Sam Protsenko (Software Engineer, Consultant, GlobalLogic) at GlobalLogic Mykolaiv Embedded TechTalk #1 on May 25, 2018.
U-Boot project has evolved in the time span of over 17 years and so as its complexity and its uses. This has made it a daunting task in getting started with its development and uses. This talk will address all these issues start with overview, features, efforts created by community and future plans.
The U-Boot project has evolved in the time span of over 17 years and so as its complexity and its uses. This has made it a daunting task in getting started with its development and uses. This talk will address all these issues and share development efforts created by the U-Boot community.
In this talk Jagan Teki(Maintainer for Allwinner SoC, SPI, SPI FLASH Subsystems) will introduce U-Boot from scratch with a brief overview of U-Boot history, U-Boot Proper, SPL, TPL, Build process and Startup sequence. He will talk about other preliminaries such as Image booting, Falcon Mode, Secure Boot and U-Boot features like device tree, device overlays, driver model and DFU, etc.
Once giving enough introduction, he will also talk about steps to port U-Boot to new hardware with a demo, along with U-Boot testing process. Finally, he will address and review ongoing development work, issues and future development regarding U-Boot.
Bootloader utilizes to program microcontrollers by providing a medium of communication between them. Hence small bootloader uses to make controller programmable very often as like Arduino series board. Microcontrollers like 8051, PIC without bootloader requires the external programmer to burn the program inside the memory of the microcontroller. In addition to it requires preciously control output states of various pin mode which should be in sequence according to the datasheet of the manufacturer. Here this PPT has portrayed as an example of idle configurations that requires to run the bootloader and what happens if the bootloader is installed inside the memory of the controller.
Linux Kernel Platform Development: Challenges and InsightsGlobalLogic Ukraine
This presentation is about the main tasks which Linux kernel platform engineers take care of. The talk includes real-life cases which help understand the role of respective specialists and might be helpful to those who consider such change in their careers.
The talk was delivered by Sam Protsenko (Software Engineer, Consultant, GlobalLogic) at GlobalLogic Embedded Career Day #2 on February 10, 2018.
More about GlobalLogic Embedded Career Day #2: https://www.globallogic.com/ua/events/globallogic-kyiv-embedded-career-day-2-materials
Linux firmware for iRMC controller on Fujitsu Primergy serversVladimir Shakhov
Integrated Remote Management Controller aka iRMC (http://manuals.ts.fujitsu.com/file/11470/irmc-s4-ug-en.pdf) is a special-purpose ARM board, included in every Fujitsu Primergy server and actually running on GNU/Linux. Digging into the process of creation of iRMC firmware, significantly based on FOSS components, including Linux kernel, busybox, glibc, net-snmp and many others. Lecture covering technical details how its working, how to use OpenSource components together with propiertary code.
Veda Solutions Providing Training for Embedded Linux Platform Developer. Here are the Introductions and course details. http://techveda.org/embedded-linux-platform-developer/
Some basic knowledges required for beginners in writing linux kernel module - with a description of linux source tree, so that the idea of where and how develops. The working of insmod and rmmod commands are described also.
Kernel Recipes 2013 - ARM support in the Linux kernelAnne Nicolas
Over the past two years, the support of the platforms based on ARM processor in the Linux kernel has evolved considerably. Between the use of the Device Tree, moving drivers in many features like clock management or multiplexing of pines, the platform mechanism, the changes have been numerous.
Through the experience of the speaker about the addition to the core support for ARM Marvell Armada 370/XP processors, this intervention will provide an overview of these changes in order to better understand the new organization of the code for ARM architecture in the kernel.
This talk is intended to be useful both for developers who want to add support for a new ARM processor in the kernel, but also to those wishing to understand the ARM code for porting Linux to a new card, or just the curious one.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.