2. Our Group Members:
Name ID
Md.Delwar Hossain 131-15-2352
Md.Naimur Rahman 131-15-2375
Prodip Sarker 131-15-2416
Md. Al Jobaed 131-15-2540
Fatema Tuz Zohora 131-15-2417
4. Objectives
• The objectives is to make an android controlled Home.
This app consists of touch controlling interface of your
Home appliances. It is simple to start with installing the
app to your phone/tablet and start controlling circuit by
your smart device.
5. Prerequisites & Equipment:
• An Arduino Board or Arduino clone
• A 5v TTL -UART Bluetooth module.
• Relays and its Driving circuits.
• Arduino IDE for the programming.
6. Principle
• This Project includes two distinct parts, hardware control circuit and the
android application. The communication between the Control circuit and the
android application is carried over by the Bluetooth link between the phone’s
Bluetooth and the Bluetooth device in the control circuit. The commands are
sent from the phone to the Robot which in turn checked by the Arduino for
the turning ON or OFF of the particular device.