eLTE Redundant Link Solution ICT Safe City Project
•
0 likes•165 views
1. The document discusses implementing redundant links for LTE base stations to provide backup connectivity. It involves deploying two fiber links from each base station to two different routers to prevent single points of failure. 2. Details are provided on the network design, equipment needed such as AR routers, optical transceivers, cable types and quantities for 10 LTE base station sites. 3. Specifications are listed for each site, including the location, distance to the OLT, and types of equipment recommended.
Report
Share
Report
Share
Download to read offline
Recommended
Huawei s5700-28-p-pwr-li-ac datasheet
Huawei S5700-28P-PWR-LI-AC is Layer 2 Ethernet Stackable Switch, supporting 24 x PoE+ 10/100/1000BASE-T ports and 4 x GE SFP Ports.
Signal Integrity to the forefront
OIF"s Tom Palkert, Molex, looks at solutions for Signal Integrity including 50G PAM with FEC, NRZ with FFE, CTLE, DFE – ENRZ
ENRZ Advanced Modulation for Low Latency Applications
The document discusses the OIF CEI-56G projects which are optimizing signal integrity for different interconnect applications. Five projects are underway for chip-to-chip reaches: LR for backplanes up to 100cm, MR for midplanes up to 50cm, VSR for chip-to-module up to 10cm, XSR for chip-to-nearby optics up to 5cm, and USR for 2.5D/3D die-to-die up to 1cm. Modulation variants like NRZ and ENRZ are being considered to meet power and latency requirements for applications like HPC that cannot tolerate forward error correction. Simulation results show ENRZ can achieve sufficient eye opening for long-reach
Sun Ge9100 Series Olt
The SUN-GE9100 series OLT features high reliability and flexibility. It supports 8 GEPON ports connecting up to 512 ONUs and 8 Gigabit Ethernet uplink ports. The OLT provides layer 2 switching and management functions. It uses hot-swappable fan and power modules in a 2U rack chassis. The OLT cards support 1.25Gbps symmetric PON ports with a maximum reach of 20km. The OLT is well-suited for FTTB/FTTP/FTTH access network solutions.
Cisco Static routing
The document discusses static and dynamic routing. Static routing is suitable for small, stable networks and involves manually configuring routing tables. Dynamic routing uses routing protocols to automatically update routing tables and is better for larger networks with multiple routes that change frequently. The document also mentions configuring IP addresses and static routes on network devices to determine the path that packets will travel between networks.
第8讲 Rip和Igrp
The document discusses RIP and IGRP routing protocols. It provides configuration examples and output of show commands to view routing protocol information and the routing table. It describes how to configure RIP and IGRP on routers, specify networks, and observe routing updates and path selection. Debug commands are also shown to troubleshoot routing protocols.
Siae Company Overview
SIAE Microelettronica is an Italian company with over 60 years of experience in wireless communications. They provide licensed point-to-point radio links that transmit voice, data, and video between two fixed locations using regulated microwave and millimeter wave spectrum. Their product portfolio includes indoor and outdoor radio units that offer high capacity up to 1 Gbps with low latency and power consumption. SIAE serves various vertical markets and can provide turn-key services including site surveys, equipment installation, and training. They aim to be a market leader through innovative solutions and local UK support.
A new featured product cisco ie4010 series switches
The document introduces the new Cisco IE4010 Series Switches, which are industrial Ethernet switches built to withstand harsh environments. The key points are:
- The IE4010 Series offers high-performance switching capacity with Gigabit Ethernet ports, robust resiliency features, and support for industrial protocols.
- Models include the IE-4010-16S12P with 16 ports and 12 PoE ports, and the IE-4010-4S24P with 24 PoE ports.
- The switches run Cisco IOS software for easy management and support features like redundant power supplies and zero-touch replacement.
Recommended
Huawei s5700-28-p-pwr-li-ac datasheet
Huawei S5700-28P-PWR-LI-AC is Layer 2 Ethernet Stackable Switch, supporting 24 x PoE+ 10/100/1000BASE-T ports and 4 x GE SFP Ports.
Signal Integrity to the forefront
OIF"s Tom Palkert, Molex, looks at solutions for Signal Integrity including 50G PAM with FEC, NRZ with FFE, CTLE, DFE – ENRZ
ENRZ Advanced Modulation for Low Latency Applications
The document discusses the OIF CEI-56G projects which are optimizing signal integrity for different interconnect applications. Five projects are underway for chip-to-chip reaches: LR for backplanes up to 100cm, MR for midplanes up to 50cm, VSR for chip-to-module up to 10cm, XSR for chip-to-nearby optics up to 5cm, and USR for 2.5D/3D die-to-die up to 1cm. Modulation variants like NRZ and ENRZ are being considered to meet power and latency requirements for applications like HPC that cannot tolerate forward error correction. Simulation results show ENRZ can achieve sufficient eye opening for long-reach
Sun Ge9100 Series Olt
The SUN-GE9100 series OLT features high reliability and flexibility. It supports 8 GEPON ports connecting up to 512 ONUs and 8 Gigabit Ethernet uplink ports. The OLT provides layer 2 switching and management functions. It uses hot-swappable fan and power modules in a 2U rack chassis. The OLT cards support 1.25Gbps symmetric PON ports with a maximum reach of 20km. The OLT is well-suited for FTTB/FTTP/FTTH access network solutions.
Cisco Static routing
The document discusses static and dynamic routing. Static routing is suitable for small, stable networks and involves manually configuring routing tables. Dynamic routing uses routing protocols to automatically update routing tables and is better for larger networks with multiple routes that change frequently. The document also mentions configuring IP addresses and static routes on network devices to determine the path that packets will travel between networks.
第8讲 Rip和Igrp
The document discusses RIP and IGRP routing protocols. It provides configuration examples and output of show commands to view routing protocol information and the routing table. It describes how to configure RIP and IGRP on routers, specify networks, and observe routing updates and path selection. Debug commands are also shown to troubleshoot routing protocols.
Siae Company Overview
SIAE Microelettronica is an Italian company with over 60 years of experience in wireless communications. They provide licensed point-to-point radio links that transmit voice, data, and video between two fixed locations using regulated microwave and millimeter wave spectrum. Their product portfolio includes indoor and outdoor radio units that offer high capacity up to 1 Gbps with low latency and power consumption. SIAE serves various vertical markets and can provide turn-key services including site surveys, equipment installation, and training. They aim to be a market leader through innovative solutions and local UK support.
A new featured product cisco ie4010 series switches
The document introduces the new Cisco IE4010 Series Switches, which are industrial Ethernet switches built to withstand harsh environments. The key points are:
- The IE4010 Series offers high-performance switching capacity with Gigabit Ethernet ports, robust resiliency features, and support for industrial protocols.
- Models include the IE-4010-16S12P with 16 ports and 12 PoE ports, and the IE-4010-4S24P with 24 PoE ports.
- The switches run Cisco IOS software for easy management and support features like redundant power supplies and zero-touch replacement.
Ft Tx Ftth Triple Play Solution Sun Ge9100
The document describes SUN Telecom's SUN-GE9100 series OLT, which features high reliability and flexibility. It can support up to 8 GEPON ports connecting 512 remote ONUs, and provides 8 Gigabit Ethernet uplink interfaces. The SUN-GE9100 OLT is suitable for FTTx applications including FTTB, FTTP, and FTTH. It supports Ethernet, VoIP, and CATV triple-play solutions over fiber.
Sun Ge9100 Series Olt
The SUN-GE9100 series OLT from SUN Telecom features high reliability and flexibility for FTTB/FTTP/FTTH access solutions. It can support 8 GEPON ports connecting up to 512 ONUs and provides 8 Gigabit Ethernet uplink interfaces. The OLT uses hot-swappable rack chassis and modular cards, including a main card with management functions and up to 4 PON cards with 2 PON ports each. It supports common networking protocols and provides monitoring and maintenance through its interfaces.
How to add and delete ont on the olt device
How to Add and Delete ONT on the OLT Device
Leading Huawei networking products distributor-Huanetwork.com
How to configure the logical distance of gpon
This document discusses how to configure the logical distance of GPON devices. It lists compatible modules and OLT/ONT devices, then explains how to use the "port range" command to set the maximum and minimum logical distance for an ONT during ranging. Setting the distances properly avoids impacting other ONT services. The "undo port range" command restores the default ranging compensation distance.
Gpon the technology --rev 1
This document discusses the GPON (Gigabit-capable Passive Optical Network) technology for fiber access networks. Some key points:
- GPON supports high-bandwidth, long-reach (up to 20km), and triple-play services, making it widely adopted by carriers.
- It uses a point-to-multipoint architecture with a single optical fiber shared between an OLT and multiple ONUs using passive splitters.
- Wavelength division multiplexing is used with downstream at 1490nm and upstream at 1310nm. Time division multiple access manages upstream bandwidth sharing between ONUs.
- Typical deployments include fiber to the home (FTTH),
American Fibertek ECR-16-POE Data Sheet
Buy the American Fibertek ECR-16-POE at JMAC Supply.
https://www.jmac.com/product_p/american-fibertek-ecr-16-poe.htm?=slideshare
Huawei ftth c b e2 e solution
The document discusses Huawei's FTTH/C/B E2E solution. It describes Huawei's OLT equipment that can be placed in the central office to reduce costs. Different OLT models are presented along with their specifications and pricing. The solution also includes a variety of ONT devices to meet different scenarios. It highlights benefits like high bandwidth, support for more users, and future compatibility. Maintenance advantages are discussed like fast fault identification and location.
ETHERNET CONVERTER NETWORKING SYSTEM
Gigabit Ethernet Converters with SFP Slots
10/100/1000-T to 1000-SX/LX Converters
100Mbps Fiber NMS Ethernet Converter
Fiber Optic Fast Ethernet Converters
Fiber Optic converter Chassis
Video /Audio /Data Fiber Optic Links
Fiber Optic Link Chassis
HD-SDI Fiber Optic Links
HD-SDI Fiber Optic Links
BNC-PoE Ethernet Converter
Fiber Optic to Serial RS232, Rs422/485 Converter
OSPF Network LSA (Type 2 LSA)
OSPF network LSAs (type 2 LSAs) are generated by the designated router for multi-access networks like NBMA and transit broadcast networks. The designated router ABR router generates a type 2 LSA to represent the Ethernet segment between routers R1, R2, and ABR in area 0. The type 2 LSA advertises the IP address of the designated router as the link state ID and is flooded within the area but does not leave the area.
Mr. Duke Fu's presentation at QITCOM 2011
QITCOM 2011
Presentation:
Achieving Efficiency through iODN
Presenter:
Duke Fu - Director, Access Network Marketing Department, HUAWEI
Quality in fttx deployments
This document discusses techniques for deploying Fiber To The X (FTTX) networks and their impact on quality. It describes micro-trenching, mini-trenching, and micro-duct deployment techniques. Micro-trenching involves cutting a narrow trench just in the asphalt layer for fiber cables. Mini-trenching uses deeper trenches, typically 30-40cm, backfilled with concrete. Micro-ducts are small ducts that can be installed before fiber is blown through. While these techniques allow for rapid deployment, the document notes they may be more susceptible to vibration, thermal issues, and difficulty during repairs compared to fully underground deployment.
Micro trenching services by t.t ehsan sdn bhd
This document summarizes T.T Ehsan Sdn Bhd's microtrenching process for fiber optic installation. Key aspects include:
1) A detailed survey is conducted to identify manhole placements, road crossings, and trench positioning.
2) Ground penetrating radar is used to detect existing buried utilities before trenching to minimize disruption.
3) Microtrenches 100mm wide and 250mm deep are cut using specialized wet or dry cutting machines.
4) Ducts are inserted into the trenches and backfilled using cold asphalt pavement that hardens within an hour, allowing quick restoration and traffic use.
SANTOSH_TELECOM_CV
Santosh Verma has over 3.5 years of experience in telecommunications. He has a B.Tech in Electronics and Communication and is currently working as an E-Node B Engineer and RF Optimization for Indovision Services Private Limited on a project for NEC India Pvt. Ltd. in Delhi. His skills include testing microwave faults, troubleshooting routers, switches and internet issues, and working on RF links and converters. He is seeking new challenges to grow in his career.
Huawei Training for Dialog Reginal Staff-1
The document discusses Huawei's training for Dialog Regional Engineering Staff on optical fiber network projects. It covers Huawei's experience with turnkey optical fiber projects, construction methods for deploying cable infrastructure, fiber and cable types, network planning processes, field surveys, design planning, and construction steps. The training agenda includes topics such as optical fiber cable installation, technical concerns, and project management. Case studies of Huawei projects in various countries are also presented.
Fttx planning and design
The document outlines the process for planning and designing a fiber-to-the-x (FTTx) network, including: 1) digitally documenting the existing network and planning duct routes; 2) registering marketing data to establish rollout priorities; 3) defining customer equipment specifications in design software; 4) planning fiber network clusters, backbones, and distribution lines; 5) obtaining approvals from authorities and owners. The process aims to optimize the network design by utilizing existing infrastructure and finding cost-efficient routes.
Cv huawe alcate zte_nsn cv
Farhan Ghafoor is seeking a challenging position in a prestigious organization where he can contribute his process management and service delivery skills. He has over 6 years of experience managing telecommunications projects in Saudi Arabia. He holds a B.S. in Telecommunication and Networks from COMSATS University of Science and Technology.
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3G
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
Huawei Capacity Upgrade
This document discusses Huawei's fiber-to-the-x (FTTx) solutions and digital subscriber line (DSL) technologies for network migration. It highlights Huawei's innovations that facilitate broadband deployment over copper lines and fiber networks. These include vectoring, G.fast, and all-in-one outdoor cabinets. The document also outlines Huawei's N2510 network testing platform for accurate fault location, demarcation, and proactive network maintenance.
Real Fibre optic FTTH FTTX network design, engineering & planning software fo...
ITS-NetDesign™
Our Fibre optic FTTH / FTTX network design, engineering & planning software for Autocad® is an important member of our suite of software solutions & planning tools.
Simply: design, engineer & plan FTTH / FTTX optical fibre networks.
Advanced modelling of P2P & GPON networks.
Real network design & engineering software for Autocad®.
Faster and more flexible than any GIS.
Software details, engine, installation, usage, customization, examples, LISP programming
Losses in fiber
There are two main types of optical fiber signal loss: scattering and absorption. Scattering losses include Rayleigh scattering caused by molecular irregularities and Mie scattering caused by larger defects. Absorption losses are caused by intrinsic material properties like ultraviolet and infrared absorption in silica glass, as well as extrinsic impurities introduced during manufacturing. Proper fiber design and high material purity can minimize these signal losses to enable effective optical fiber communication.
10 STAGES OF FIBER OPTICS PROJECT IMPLEMENTATION
HOW TO CARRY OUT SUCCESSFUL FIBER OPTIC PROJECT STAGE BY STAGE. THE OUTSIDE PLANT PROJECT OF FIBER OPTICS CABLING TECHNIQUES WHICH INCLUDE PROJECT PLANNING TO PROJECT EXECUTION
Gpon fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology:
- GPON uses wavelength division multiplexing to enable bidirectional communication over a single fiber, with downstream broadcast and upstream TDMA for multiplexing user signals.
- Key standards include ITU-T G.984 for parameters, G.984.2 for physical layer specs, G.984.3 for transmission convergence layer, and G.984.4 for OMCI management.
- The GPON architecture consists of an OLT, ONUs, a passive optical splitter, and supports transmission speeds up to 2.5Gbps downstream and 1.25Gbps upstream.
More Related Content
What's hot
Ft Tx Ftth Triple Play Solution Sun Ge9100
The document describes SUN Telecom's SUN-GE9100 series OLT, which features high reliability and flexibility. It can support up to 8 GEPON ports connecting 512 remote ONUs, and provides 8 Gigabit Ethernet uplink interfaces. The SUN-GE9100 OLT is suitable for FTTx applications including FTTB, FTTP, and FTTH. It supports Ethernet, VoIP, and CATV triple-play solutions over fiber.
Sun Ge9100 Series Olt
The SUN-GE9100 series OLT from SUN Telecom features high reliability and flexibility for FTTB/FTTP/FTTH access solutions. It can support 8 GEPON ports connecting up to 512 ONUs and provides 8 Gigabit Ethernet uplink interfaces. The OLT uses hot-swappable rack chassis and modular cards, including a main card with management functions and up to 4 PON cards with 2 PON ports each. It supports common networking protocols and provides monitoring and maintenance through its interfaces.
How to add and delete ont on the olt device
How to Add and Delete ONT on the OLT Device
Leading Huawei networking products distributor-Huanetwork.com
How to configure the logical distance of gpon
This document discusses how to configure the logical distance of GPON devices. It lists compatible modules and OLT/ONT devices, then explains how to use the "port range" command to set the maximum and minimum logical distance for an ONT during ranging. Setting the distances properly avoids impacting other ONT services. The "undo port range" command restores the default ranging compensation distance.
Gpon the technology --rev 1
This document discusses the GPON (Gigabit-capable Passive Optical Network) technology for fiber access networks. Some key points:
- GPON supports high-bandwidth, long-reach (up to 20km), and triple-play services, making it widely adopted by carriers.
- It uses a point-to-multipoint architecture with a single optical fiber shared between an OLT and multiple ONUs using passive splitters.
- Wavelength division multiplexing is used with downstream at 1490nm and upstream at 1310nm. Time division multiple access manages upstream bandwidth sharing between ONUs.
- Typical deployments include fiber to the home (FTTH),
American Fibertek ECR-16-POE Data Sheet
Buy the American Fibertek ECR-16-POE at JMAC Supply.
https://www.jmac.com/product_p/american-fibertek-ecr-16-poe.htm?=slideshare
Huawei ftth c b e2 e solution
The document discusses Huawei's FTTH/C/B E2E solution. It describes Huawei's OLT equipment that can be placed in the central office to reduce costs. Different OLT models are presented along with their specifications and pricing. The solution also includes a variety of ONT devices to meet different scenarios. It highlights benefits like high bandwidth, support for more users, and future compatibility. Maintenance advantages are discussed like fast fault identification and location.
ETHERNET CONVERTER NETWORKING SYSTEM
Gigabit Ethernet Converters with SFP Slots
10/100/1000-T to 1000-SX/LX Converters
100Mbps Fiber NMS Ethernet Converter
Fiber Optic Fast Ethernet Converters
Fiber Optic converter Chassis
Video /Audio /Data Fiber Optic Links
Fiber Optic Link Chassis
HD-SDI Fiber Optic Links
HD-SDI Fiber Optic Links
BNC-PoE Ethernet Converter
Fiber Optic to Serial RS232, Rs422/485 Converter
OSPF Network LSA (Type 2 LSA)
OSPF network LSAs (type 2 LSAs) are generated by the designated router for multi-access networks like NBMA and transit broadcast networks. The designated router ABR router generates a type 2 LSA to represent the Ethernet segment between routers R1, R2, and ABR in area 0. The type 2 LSA advertises the IP address of the designated router as the link state ID and is flooded within the area but does not leave the area.
What's hot (9)
Viewers also liked
Mr. Duke Fu's presentation at QITCOM 2011
QITCOM 2011
Presentation:
Achieving Efficiency through iODN
Presenter:
Duke Fu - Director, Access Network Marketing Department, HUAWEI
Quality in fttx deployments
This document discusses techniques for deploying Fiber To The X (FTTX) networks and their impact on quality. It describes micro-trenching, mini-trenching, and micro-duct deployment techniques. Micro-trenching involves cutting a narrow trench just in the asphalt layer for fiber cables. Mini-trenching uses deeper trenches, typically 30-40cm, backfilled with concrete. Micro-ducts are small ducts that can be installed before fiber is blown through. While these techniques allow for rapid deployment, the document notes they may be more susceptible to vibration, thermal issues, and difficulty during repairs compared to fully underground deployment.
Micro trenching services by t.t ehsan sdn bhd
This document summarizes T.T Ehsan Sdn Bhd's microtrenching process for fiber optic installation. Key aspects include:
1) A detailed survey is conducted to identify manhole placements, road crossings, and trench positioning.
2) Ground penetrating radar is used to detect existing buried utilities before trenching to minimize disruption.
3) Microtrenches 100mm wide and 250mm deep are cut using specialized wet or dry cutting machines.
4) Ducts are inserted into the trenches and backfilled using cold asphalt pavement that hardens within an hour, allowing quick restoration and traffic use.
SANTOSH_TELECOM_CV
Santosh Verma has over 3.5 years of experience in telecommunications. He has a B.Tech in Electronics and Communication and is currently working as an E-Node B Engineer and RF Optimization for Indovision Services Private Limited on a project for NEC India Pvt. Ltd. in Delhi. His skills include testing microwave faults, troubleshooting routers, switches and internet issues, and working on RF links and converters. He is seeking new challenges to grow in his career.
Huawei Training for Dialog Reginal Staff-1
The document discusses Huawei's training for Dialog Regional Engineering Staff on optical fiber network projects. It covers Huawei's experience with turnkey optical fiber projects, construction methods for deploying cable infrastructure, fiber and cable types, network planning processes, field surveys, design planning, and construction steps. The training agenda includes topics such as optical fiber cable installation, technical concerns, and project management. Case studies of Huawei projects in various countries are also presented.
Fttx planning and design
The document outlines the process for planning and designing a fiber-to-the-x (FTTx) network, including: 1) digitally documenting the existing network and planning duct routes; 2) registering marketing data to establish rollout priorities; 3) defining customer equipment specifications in design software; 4) planning fiber network clusters, backbones, and distribution lines; 5) obtaining approvals from authorities and owners. The process aims to optimize the network design by utilizing existing infrastructure and finding cost-efficient routes.
Cv huawe alcate zte_nsn cv
Farhan Ghafoor is seeking a challenging position in a prestigious organization where he can contribute his process management and service delivery skills. He has over 6 years of experience managing telecommunications projects in Saudi Arabia. He holds a B.S. in Telecommunication and Networks from COMSATS University of Science and Technology.
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3G
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
Huawei Capacity Upgrade
This document discusses Huawei's fiber-to-the-x (FTTx) solutions and digital subscriber line (DSL) technologies for network migration. It highlights Huawei's innovations that facilitate broadband deployment over copper lines and fiber networks. These include vectoring, G.fast, and all-in-one outdoor cabinets. The document also outlines Huawei's N2510 network testing platform for accurate fault location, demarcation, and proactive network maintenance.
Real Fibre optic FTTH FTTX network design, engineering & planning software fo...
ITS-NetDesign™
Our Fibre optic FTTH / FTTX network design, engineering & planning software for Autocad® is an important member of our suite of software solutions & planning tools.
Simply: design, engineer & plan FTTH / FTTX optical fibre networks.
Advanced modelling of P2P & GPON networks.
Real network design & engineering software for Autocad®.
Faster and more flexible than any GIS.
Software details, engine, installation, usage, customization, examples, LISP programming
Losses in fiber
There are two main types of optical fiber signal loss: scattering and absorption. Scattering losses include Rayleigh scattering caused by molecular irregularities and Mie scattering caused by larger defects. Absorption losses are caused by intrinsic material properties like ultraviolet and infrared absorption in silica glass, as well as extrinsic impurities introduced during manufacturing. Proper fiber design and high material purity can minimize these signal losses to enable effective optical fiber communication.
10 STAGES OF FIBER OPTICS PROJECT IMPLEMENTATION
HOW TO CARRY OUT SUCCESSFUL FIBER OPTIC PROJECT STAGE BY STAGE. THE OUTSIDE PLANT PROJECT OF FIBER OPTICS CABLING TECHNIQUES WHICH INCLUDE PROJECT PLANNING TO PROJECT EXECUTION
Gpon fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology:
- GPON uses wavelength division multiplexing to enable bidirectional communication over a single fiber, with downstream broadcast and upstream TDMA for multiplexing user signals.
- Key standards include ITU-T G.984 for parameters, G.984.2 for physical layer specs, G.984.3 for transmission convergence layer, and G.984.4 for OMCI management.
- The GPON architecture consists of an OLT, ONUs, a passive optical splitter, and supports transmission speeds up to 2.5Gbps downstream and 1.25Gbps upstream.
Optical Fiber
Optical fibers transmit light and operate based on the principles of total internal reflection. They consist of a core and cladding material, with the core having a higher refractive index. This allows light to be guided along the fiber due to total internal reflection at the core-cladding boundary. There are two main types of optical fibers - single-mode fibers which only allow one mode of light to propagate, and multi-mode fibers which allow multiple light modes. Dispersion and attenuation are two factors that limit the performance of optical fibers by causing light pulses to broaden as they travel along the fiber.
FTTH Basics
This document discusses fiber to the home (FTTH) networks. It begins by providing background on communications service providers and the evolution of access networks from copper wire to newer fiber optic technologies. Fiber access networks like passive optical networks (PON) are described as offering higher speeds and bandwidth. FTTH networks provide an ultimate network capacity and allow for new experiences like high definition TV, 3D content, and high-speed internet. The conclusion is that FTTH using optical fiber is a future-proof solution. The document is authored by Eng. Anuradha Udunuwara, an engineer with experience in telecommunications network strategy, architecture, and design.
Excavation & Trenching Safety
This PPT contains
OHS Act and Regulation Requirements
Trenching Inspection and Protection
Underground Utilities
Huawei parameter strategy v1.4 1st dec
Parameter related to Traffic Share Solution (Traffic Balancing) , Idle Mode & Call Control, handover, 2G/3G interoperability, power control
Losses in optical fiber
Losses in optical fibers include attenuation from absorption and scattering, as well as dispersion effects. Attenuation is caused by absorption of light energy through heating of impurities in the fiber, resulting in a loss of optical power over length. Dispersion causes pulse broadening and occurs from intermodal and intramodal effects such as material and waveguide dispersion. An optical time domain reflectometer (OTDR) can be used to detect faults, splices, and bends in fibers by emitting light pulses and measuring backscattered light over time to map reflections in the fiber.
Fiber Optics Presentation
Fiber optic sensors have four potential functions in structural health monitoring: monitoring external manufacturing process parameters, serving as embedded sensors for non-destructive evaluation, functioning as a data-link network to support other SHM systems, and complementing performance monitoring and control systems. Fiber optic sensors have advantages over conventional electronic sensors in that they are made of silica-based materials, enable multiplexing, and have a lower cost. They can provide distributed sensing along structures like buildings to monitor temperature. Fiber Bragg grating sensors embedded in concrete have been used to measure strain on the Confederation Bridge in Canada.
application of fibre optics in communication
Fibre optic communication has revolutionised telecommunications by enabling much longer distance links with lower loss and higher data rates. Fibre optic systems use total internal reflection to transmit light through the fibre and are used widely in telecom backbones, broadband networks, and data transmission. Single mode fibre has a small core and transmits single signals for long distances, while multi-mode fibre has a larger core and transmits multiple signals for shorter links like local networks. Fibre optics enable high-speed internet, cable TV, and reliable data transmission.
Viewers also liked (20)
Real Fibre optic FTTH FTTX network design, engineering & planning software fo...
Real Fibre optic FTTH FTTX network design, engineering & planning software fo...
Similar to eLTE Redundant Link Solution ICT Safe City Project
Gpon Network
The document discusses network development challenges and options for access networks, including deploying fiber and GPON networks. It recommends:
1. Reviewing requirements for Q3, Q4 2006 and 2007 and coordinating with marketing.
2. Developing GPON networks while using existing equipment temporarily if services are urgently needed.
3. Considering wireless solutions if no fixed infrastructure is available.
Gpon Network
The document discusses network development challenges and options for access networks. It considers using ADSL, fiber, and wireless technologies to provide voice, internet, and TV services to customers. GPON fiber is presented as the preferred long term solution, but various temporary options are proposed to meet capacity needs in the near term until the GPON network is deployed across all areas.
400G/800G High Speed Networking product guide
We are offering a comprehensive high speed networking solution which is including 3.2T Co-packaged Optic (CPO), 100G, 200G, 400G & 800G transceivers, DACs, AOCs, ACCs & Loopback modules. We are fulfil your research (R&D) stage product development, DVT/EVT pre-product testing, mass production and also for final application use.
Welcome to contact us for more product info.
Athens Standard & Technical
The document discusses trends in data networking technologies including faster switching and transmission speeds. It notes that 10GbE is established while 40GbE and 100GbE devices will emerge in 2010. Data center servers will adopt 40GbE by 2011 and 100GbE by 2018. To support these higher speeds, cabling infrastructure will need to accommodate standards like OM3/OM4 optical fiber and potential 40GbE copper cabling operating at around 2GHz. Proper cabling now can help support 40GbE and faster speeds in the future.
05. DF - Latest Trends in Optical Data Center Interconnects
This document discusses the latest trends in optical data center interconnects. It notes that data center connections are moving from 10G/40G to 25G/100G, and within and between data centers. New hyperscale data center architectures are flattening traditional tiered topologies. Interconnect technologies are seeing a significant increase in 100G and 25G port densities using smaller form factors like QSFP28 and SFP28. Standards organizations are working on 50G, 200G, 400G, and next-generation 100G Ethernet to support these increases in bandwidth.
huawei-s-sfp-fe-lh40-sm1310-brochure-datasheet.pdf
The document summarizes an optical transceiver module. It is an eSFP module that operates at 1310nm over single-mode fiber up to 40km. It provides fast ethernet connectivity at 100Mbit/s over a single-mode LC connector. The document provides specifications, supported switch models, comparison to a similar multimode module, and contact information for the supplier.
huawei-ls-s3328tp-si-ac-brochure-datasheet.pdf
The document provides information about the LS-S3328TP-SI-AC network switch from Huawei, including its specifications and features. It has 24 FastEthernet ports, 2 combo Gigabit Ethernet ports, and 2 additional SFP ports. Key features include 12.8 Gbps switching capacity, 9.6 Mpps forwarding performance, and support for VLANs, QoS, IPv6, security, and management functions. It is intended for use by carriers and enterprises to provide Ethernet connectivity and services. Technical details like processor speed, memory, and dimensions are provided for comparison with similar Huawei switch models.
huawei-s-sfp-ge-lh40-sm1550-brochure-datasheet.pdf
This document provides specifications for an optical transceiver module. It is an eSFP form factor single-mode fiber module that operates at 1 Gbps over a distance of 40 km at a wavelength of 1550 nm. It is compatible with various Huawei switch models. The module's specifications including connector type, optical power levels, and temperature range are described and compared to a similar 1310 nm model. Contact information is provided to inquire further about purchasing the S-SFP-GE-LH40-SM1550 optical transceiver module.
45555555555-4G-Training .pptx
The document discusses Ericsson radio network equipment used in Mumbai, India including:
1. An Ericsson baseband unit (BBU 6630) and radio unit (RBS AIR 6468) that support 5G, LTE, and legacy radio technologies.
2. The BBU facilitates a scalable system with indoor baseband units and external radios.
3. The RBS is an advanced antenna system capable of beamforming and massive MIMO to enhance coverage, capacity, and performance.
4. Additional modules like the capacity plug-in unit, radio modules, and fiber distribution unit that integrate with the system are also described.
huawei-ls-s2309tp-si-ac-brochure-datasheet.pdf
The LS-S2309TP-SI-AC is a basic layer 2 access switch with 8 FastEthernet ports, 1 Gigabit Ethernet port, and an AC power supply. It provides functions such as VLAN, QoS, IPv6, port mirroring, and basic security. Compared to the similar LS-S2309TP-EI-AC model, it has fewer advanced features and only supports AC power. The LS-S2309TP-SI-AC is suitable for small networks that require basic switching and connectivity.
huawei-s6730-s24x6q-brochure-datasheet.pdf
The Huawei CloudEngine S6730-S24X6Q switch provides 10GbE and 40GbE connectivity. It has 24 10GbE SFP+ ports and 6 40GbE QSFP+ ports. The switch is designed for high-speed access to servers or as a core/aggregation switch on campus networks. It supports various security, QoS, and management features to help build scalable, manageable, reliable, and secure campus and data center networks. The S6730-S24X6Q comes in different part numbers that have minor differences in software versions and heat dissipation methods.
huawei-s6730-s24x6q-brochure-datasheet.pdf
The Huawei CloudEngine S6730-S24X6Q switch provides 10GbE and 40GbE connectivity. It has 24 10GbE SFP+ ports and 6 40GbE QSFP+ ports. The switch is designed for high-speed access to servers or as a core/aggregation switch on campus networks. It supports various security, QoS, and management features to help build scalable, reliable networks. The S6730-S24X6Q comes in different part numbers that have minor differences in software versions and heat dissipation methods.
Dell networking optics and cables connectivity guide
This document provides a connectivity guide for Dell Networking optics and cables. It discusses key factors to consider when selecting optics and cables for different use cases like server to switch, storage to switch, and switch to switch connectivity. It also includes a quick reference guide listing Dell optics and cable models with specifications like standard, receptacle, power, wavelength, distance, fiber mode, and a frequently asked questions section.
ACI MultiPod 구성
The document describes the configuration of a multi-pod ACI topology with IPN connectivity. It includes steps to configure the APIC clusters, fabric pods, EVPN connectivity between pods, IPN VLANs and subnets, OSPF routing in the IPN, and interface policies for IPN traffic. The goal is to establish IP network connectivity between remote pods using ACI spine switches as IPN routers.
huawei-s5700-52p-li-ac-brochure-datasheet.pdf
(1) The Huawei S5700-52P-LI-AC switch has 48 10/100/1000 Ethernet ports, 4 Gigabit Ethernet SFP ports, and AC power supply.
(2) It provides 78Mpps of forwarding performance and supports up to 4,000 VLANs and 16,000 MAC addresses.
(3) The document provides specifications, transceiver options, and contact information for purchasing the switch from HI-NETWORK.COM.
huawei-s5700-28x-li-ac-brochure-datasheet.pdf
The document provides specifications for the Huawei S5700-28X-LI-AC network switch. It has 24 10/100/1000 Ethernet ports, 4 10G SFP+ ports, and supports up to 16K MAC addresses and 4K VLANs. The switch has a forwarding performance of 96Mpps and switching capacity of 256Gbps. It can be rack, wall, or desk mounted and has dimensions of 44.2cm x 22cm x 4.36cm. The switch requires an AC power supply and has a 1-year warranty.
huawei-s5700-10p-li-ac-brochure-datasheet.pdf
The document provides specifications for the Huawei S5700-10P-LI-AC network switch. It has 8 10/100/1000 Ethernet ports, 2 Gigabit SFP ports, supports up to 16K MAC addresses and 4K VLANs. It has a switching capacity of 256Gbps and can be rack, desk or wall mounted. Power is provided via an AC power supply and it has a fanless cooling system.
259711021-LTE-Training.pptx
The document provides an overview of LTE and LTE optimization. It discusses the LTE architecture including the Evolved Packet System components like eNodeB, MME, S-GW, P-GW, HSS, and PCRF. It describes the LTE air interface including bandwidths, frequency bands, and UE capabilities. It also covers call flows, handovers, and optimization topics like network optimization processes, RF optimization objects, and troubleshooting metrics.
huawei-s5710-52c-pwr-ei-brochure-datasheet.pdf
The S5710-52C-PWR-EI is a next-generation energy-saving gigabit enterprise switch developed by Huawei with 48 GE ports and 2 extension slots. It provides high bandwidth and density for access and aggregation. It is used for enterprise park access, data center convergence, and gigabit access. It has redundant and hot-swappable power supplies and supports PoE. It is easy to install and maintain to reduce network management workload. It uses advanced reliability, security, and energy efficiency technologies.
huawei-ls-s2318tp-si-ac-brochure-datasheet.pdf
The LS-S2318TP-SI-AC is a 16-port Ethernet switch that provides basic layer 2 networking features. It has 16 10/100Mbps ports and 2 Gigabit ports, supports up to 8K MAC addresses, 4096 VLANs, QoS, IPv6, IGMP snooping, port mirroring, security features, and can be managed through CLI, web, and SNMP. It has dimensions of 442mm x 220mm x 43.6mm, weighs 2.4kg, and has a power consumption of under 14.5W when operating between 0-50 degrees Celsius.
Similar to eLTE Redundant Link Solution ICT Safe City Project (20)
05. DF - Latest Trends in Optical Data Center Interconnects
05. DF - Latest Trends in Optical Data Center Interconnects
huawei-s-sfp-fe-lh40-sm1310-brochure-datasheet.pdf
huawei-s-sfp-fe-lh40-sm1310-brochure-datasheet.pdf
huawei-s-sfp-ge-lh40-sm1550-brochure-datasheet.pdf
huawei-s-sfp-ge-lh40-sm1550-brochure-datasheet.pdf
Dell networking optics and cables connectivity guide
Dell networking optics and cables connectivity guide
eLTE Redundant Link Solution ICT Safe City Project
- 1. eLTE Redundant Link Solution
- 2. 1 eLTE Redundant Link Solution GPON OLT Splitter ONU IVS Site ONU VMS Site …… LTE BS Network Router Traffic Camera CPE LTE BS Solution: 1.Add a AR Router at each LTE Base site. 2. Add new link to connect second NE40 router. Route 1 Route 2
- 3. 2 ODN Design Principles- Civil Work Drop Duct NE40 NE40 ODF ODF Core Ring Access RingHH HH LTE BS Route 2 Route 1 Route 2 Route 2 Route 1 Route 1 Route 2 HH LTE BS Route 1 Route 1 Route 1 Route 2 Route 2 Route 2 Route 2 Access Ring H H OLT -1 OLT -2
- 4. 3 LTE01 Redundant Link Deploy two fibers to connect to two different NE40
- 7. 6 LTE04 Redundant Link Deploy two fibers to connect to two different NE40
- 14. 13 Redundant Link for Each Base List SN Site ID OLT Site address Type AR ROUTER A direction TO B direction TO 1 LTE01 OLT1 Sector G5 - NADRA HQ Roof Top AR550 NADRA HQ NE40 OLT1 NE40 2 LTE02 OLT2 Sector F8 - Warid Site Existing Monopole AR550 OLT2 NE40 OLT1 NE40 3 LTE03 OLT3 Sector F11 - Warid3008 (Millenium Heights) Roof Top AR550 OLT3 NE40 OLT2 NE40 4 LTE04 OLT4 ECC Building Roof Top AR550 OLT4 NE40 OLT6 NE40 5 LTE05 OLT5 KRL Cricket Ground - UFONE 8141 Existing AR550 OLT5 NE40 OLT4 NE40 6 LTE06 OLT6 Sector G7 - ZTBL Warid Tower AR550 OLT6 NE40 OLT1 NE40 7 LTE07 OLT4 Motorway Chowk - Warid 2972 Existing Tower AR550 OLT4 NE40 OLT6 NE40 8 LTE08 OLT4 Sector I9 - Mobilink 1153 Existing Tower AR550 OLT4 NE40 OLT6 NE40 9 LTE09 OLT1 Islamabad Club - Mobilink 1090 Existing Monopole AR550 OLT1 NE40 OLT5 NE40 10 LTE10 OLT4 Golra Mor - UFONE 2023 Existing Tower AR550 OLT4 NE40 OLT3 NE40
- 15. 14 Network Device for each eLTE Base station No. Description Total Quantity NADRA_Du al 10km Warid Site_10km_ 40km Warid3008 _10km_40k m ECC_Dual 10km KRL Cricket Ground_10k m_40km Sector G7_10km_4 0km Motorway Chowk_Dua l 40km Sector I9_10km_40 km Islamabad Club_10km_ 40km Golra Mor_Dual 40km 1 AR550 Industrial Switching Router 1.1 AR550 Mainframe and Module AR550-8FE-D-H,4GE COMBO WAN,8 FE LAN,1 USB2.0,1 DO,1 SAUX,2 9.6-60V POWER 10 1 1 1 1 1 1 1 1 1 1 1.2 Optical Transceiver 1.2.1 GE-eSFP Optical Transceiver Optical Transceiver,eSFP,850nm,1.25Gb/s,-10dBm,- 2.5dBm,-17dBm,LC(-40~85),multi-mode,0.55km 10 1 1 1 1 1 1 1 1 1 1 Optical Transceiver,eSFP,1310nm,1.25Gb/s,-9.5~- 3dBm,-20dBm,LC(-40~85),single-mode,10km 20 4 2 2 4 2 2 2 2 Optical transceiver,eSFP,1310nm,1.25Gb/s,- 4.5dBm,3dBm,-22.5dBm,LC(-40~85),single-mode,40km 20 0 2 2 0 2 2 4 2 2 4 1.3 Installation Materials 1.3.1 AR,Trunk Cable & Converter RJ45-to-DB9,Adapter Console Cable,3m 10 1 1 1 1 1 1 1 1 1 1
- 16. 15 OSP Evaluation Site OSP eLTE07 3KM Other 5KM
- 17. Copyright©2012 Huawei Technologies Co., Ltd. All Rights Reserved. The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice. HUAWEI ENTERPRISE ICT SOLUTIONS A BETTER WAY