ELEKTROKARBON is manufacturer of own carbon and graphite materials, carbon brushes, carbon strips and machined graphite parts. We have more than 60 years tradition and experiences in development and manufacturing
Russia's economy is heavily dependent on energy exports, and a sharp decline in global energy prices has negatively impacted the Russian economy. Lower oil and gas revenues are reducing infrastructure spending by Russian state-owned companies, including Russian Railways. Russian Railways had planned a large expansion and modernization of the rail network, but these plans may now be scaled back or delayed due to lower funding. The economic challenges also raise questions about potential privatization plans for parts of Russian Railways.
Low-angle turnouts application into new and upgraded linesJosef Zbořil
This document discusses low-angle turnouts for railways. It presents at a symposium on new challenges for European railways. The document describes low-angle turnouts, noting their lower wear rate compared to normal turnouts due to lower wheel impacts. It discusses the installation of low-angle turnouts, requiring specialized equipment and careful preparation due to their large size. Monitoring equipment is also described that tracks loading conditions on turnouts. The conclusions emphasize the need for precise installation and effect of vehicle condition on turnout performance.
Ulrich Hofmann is a partner consultant for S&T Slovenia, Deltek UK, and Infor in Germany, USA, Italy and India specializing in project, manufacturing and service consulting for industries including ship building, mechanical engineering, power plants and transportation systems. Some of his clients include ABB, Andritz, BEA Aircraft Systems, BWT, ETI, EFD, ESO, German Airforce, Gildemeister, HARSCO Rail, L&T Ship Building, Rolls Royce, Rousse Ship Building, Skoda Power Plants, Skoda Transportation, Solar Turbines, Snecma, Termogas, Thies Engineering and Ustra Transportation. Recently, he provided
Extended metro in stockholm, stockholm county councilBusiness Finland
The document summarizes plans to extend the Stockholm Metro system through 2025. Key aspects include:
- The extension will add 78,000 new homes and connect growing suburbs.
- Total investment is SEK 25.7 billion to fund rail infrastructure, depots, trains, and six new stations.
- Construction will take place from 2014-2025 on three main lines: Barkarby, Arenastaden, and Nacka/Söderort.
- The Extended Metro Administration was formed in 2014 to oversee planning, design, and construction.
The document discusses passenger rail markets in Hungary in 2005 and 2006. It provides data on the number of passengers per population in 2005, the number of million passenger-kilometers traveled in 2006, and the percentage change in passenger-kilometers from 2001 to 2006.
Lydia Kairl - King William pedestrian crossingsJumpingJaq
This document discusses proposed pedestrian crossing improvements along King William Road. It summarizes existing pedestrian and vehicle traffic conditions, including pedestrian counts of over 300 people in a 10 hour period. Warrant criteria for installing zebra crossings require an average of 20 or more pedestrians per hour and over 200 vehicles per hour. Traffic studies found average vehicle volumes well over 200 vehicles per hour and average pedestrian volumes of 22 and 55 people per hour at two locations, meeting the warrant criteria. The document recommends installing zebra crossings to improve pedestrian safety and access along King William Road.
The growing number of offshore wind farms require more and more maritime hardware. European shipyards have the right set of capabiities to ensure that the logistic chains are fully supplied with efficient vessels, from foundation preparation till the first watt is produced.
The document discusses open data related to public transit systems in various cities. It notes key statistics about train stations, track length, trains, and stops for Swiss Railways. It also provides similar statistics for Grenoble's public transit system, which includes 475 stations, 300 km of bus and tram tracks, and 3,000 vehicles with 77,000 stops daily. The presentation advocates that cities should make their public transit data openly available.
Russia's economy is heavily dependent on energy exports, and a sharp decline in global energy prices has negatively impacted the Russian economy. Lower oil and gas revenues are reducing infrastructure spending by Russian state-owned companies, including Russian Railways. Russian Railways had planned a large expansion and modernization of the rail network, but these plans may now be scaled back or delayed due to lower funding. The economic challenges also raise questions about potential privatization plans for parts of Russian Railways.
Low-angle turnouts application into new and upgraded linesJosef Zbořil
This document discusses low-angle turnouts for railways. It presents at a symposium on new challenges for European railways. The document describes low-angle turnouts, noting their lower wear rate compared to normal turnouts due to lower wheel impacts. It discusses the installation of low-angle turnouts, requiring specialized equipment and careful preparation due to their large size. Monitoring equipment is also described that tracks loading conditions on turnouts. The conclusions emphasize the need for precise installation and effect of vehicle condition on turnout performance.
Ulrich Hofmann is a partner consultant for S&T Slovenia, Deltek UK, and Infor in Germany, USA, Italy and India specializing in project, manufacturing and service consulting for industries including ship building, mechanical engineering, power plants and transportation systems. Some of his clients include ABB, Andritz, BEA Aircraft Systems, BWT, ETI, EFD, ESO, German Airforce, Gildemeister, HARSCO Rail, L&T Ship Building, Rolls Royce, Rousse Ship Building, Skoda Power Plants, Skoda Transportation, Solar Turbines, Snecma, Termogas, Thies Engineering and Ustra Transportation. Recently, he provided
Extended metro in stockholm, stockholm county councilBusiness Finland
The document summarizes plans to extend the Stockholm Metro system through 2025. Key aspects include:
- The extension will add 78,000 new homes and connect growing suburbs.
- Total investment is SEK 25.7 billion to fund rail infrastructure, depots, trains, and six new stations.
- Construction will take place from 2014-2025 on three main lines: Barkarby, Arenastaden, and Nacka/Söderort.
- The Extended Metro Administration was formed in 2014 to oversee planning, design, and construction.
The document discusses passenger rail markets in Hungary in 2005 and 2006. It provides data on the number of passengers per population in 2005, the number of million passenger-kilometers traveled in 2006, and the percentage change in passenger-kilometers from 2001 to 2006.
Lydia Kairl - King William pedestrian crossingsJumpingJaq
This document discusses proposed pedestrian crossing improvements along King William Road. It summarizes existing pedestrian and vehicle traffic conditions, including pedestrian counts of over 300 people in a 10 hour period. Warrant criteria for installing zebra crossings require an average of 20 or more pedestrians per hour and over 200 vehicles per hour. Traffic studies found average vehicle volumes well over 200 vehicles per hour and average pedestrian volumes of 22 and 55 people per hour at two locations, meeting the warrant criteria. The document recommends installing zebra crossings to improve pedestrian safety and access along King William Road.
The growing number of offshore wind farms require more and more maritime hardware. European shipyards have the right set of capabiities to ensure that the logistic chains are fully supplied with efficient vessels, from foundation preparation till the first watt is produced.
The document discusses open data related to public transit systems in various cities. It notes key statistics about train stations, track length, trains, and stops for Swiss Railways. It also provides similar statistics for Grenoble's public transit system, which includes 475 stations, 300 km of bus and tram tracks, and 3,000 vehicles with 77,000 stops daily. The presentation advocates that cities should make their public transit data openly available.
This document provides an overview of an industrial company that has been in operation since 1969. It has over 100 employees, operates across multiple business lines including automotive, aeronautics, and industrial sectors. The company offers various services across its value chain including engineering, welding, machining, assembly, and metrology. It has the internal resources and capabilities to manage industrial turnkey projects.
The main purpose of this catalogue is to illustrate the specific production of firms manufacturing machine tools for the railway sector.
The railway industry has become a major destination for products made by member firms of AFM, as both mainstream manufacturers and auxiliary businesses alike have committed themselves to Spanish machine tools.
Our company's offer for the railway sector focuses on machining, dimensional control and maintenance of wheelsets and the provision of solutions for rails, bogies, carriages, traction system components, etc.
Out of a wide array of specific applications, we might highlight processes such as the grinding of revolving parts designed for the train's traction system, gantry milling, drilling, casting for the making of wheels and rails, the exterior finish on carriages and wheelset turning, boring and dimensional control.
This document provides an overview of a Czech manufacturing company called 5M that produces composite materials. It was founded in 1992 and has 200 employees working in a 5,000 square meter production facility. The company focuses on research and development, investing 7% of annual turnover, and has partnerships with several universities and research institutions. 5M produces composite profiles, sandwich panels, epoxy resins and adhesives that are used in industries like transportation, aviation, construction and sports equipment.
We are the dominant manufacturer of mowing tractors in the Czech Republic and an important supplier of this equipment especially to the EU countries. We have been involved in the mowing business without interruption since 1895.
http://www.secogroup.cz/en/
UDEGA was created from the merger of eight Galician aeronautical companies with over 25 years of experience in the industry. The merger unified work methods and optimized resources to improve efficiency. UDEGA has over 300 staff across engineering, programming, fabrication, and quality control. It provides design, manufacturing, and testing services to clients in aeronautics, automotive, and other industries.
This document provides an overview of forging processes and technology. It discusses the history of forging dating back 6000 years and how steam and water power replaced manual forging in the 18th-19th centuries. It also outlines key modern forging processes like drop forging, describes common forging materials like various grades of steel, and explains factors that influence the accuracy of forged parts.
This technical resume summarizes the qualifications and experience of Adrian Farfaglia in mechanical engineering design, drafting, project management, and construction. It details his 46 years of experience working as a contractor for various manufacturing companies, with responsibilities including design, drafting, project management, and on-site commissioning. His areas of expertise include bulk material handling systems, automation equipment, heavy machinery, tooling, and residential construction. The resume lists his education and training in mechanical design, engineering, and construction. It provides employment history from 1989 to the present, describing his roles and responsibilities on various projects for companies in various industries.
Metal is a Spanish manufacturer of powder metallurgy components founded in 1946. It produces sintered components for automotive engines and transmissions, friction materials for brakes and clutches, and bearings. The company has facilities across Europe and in the US, with products sold in France, Germany, Spain, and other countries. After recent acquisitions, Metal now has two main business units focused on shock absorbers and engine components.
The document provides information about Baumruk & Baumruk s.r.o., a Czech engineering company that specializes in metal manufacturing and railway part production. It details the company's history starting in 1990, facilities, certifications, services including metal fabrication, machining and surface finishing technologies, typical products, and machinery used. The company produces parts for construction equipment and railway vehicles and exports to many European countries.
The document summarizes the products and services offered by A. Stucki Co., an OEM supplier for the railroad industry based in Mexico. It provides steel processing and fabrication services including coil straightening, stamping using presses up to 800 tons, assembly via welding and riveting, heat treatment, and plasma cutting. It also manufactures urethane components, anti-skid floors and platforms, and provides various products for braking systems, suspensions systems, and draft systems for the railroad industry. Key services include stamping, assembly, fabrication, heat treatment, molding of urethane components, and manufacturing of items like brake beams, roll guards, truck bottom rods, and draft gears.
The document summarizes the products and services of Proleter d.o.o., a Serbian metal industry company with decades of experience in mechanical engineering. It produces forgings for industries like electricity, automotive, oil/gas, and railways. It also produces equipment for power transmission lines and railways. Additional products include spare parts, chains, screws, and silumin castings. Services include thermal treatment and surface protection like galvanizing and phosphating. The company aims to modernize, automate processes, and implement a dual education system.
Adrian Farfaglia has over 30 years of experience in mechanical engineering design, drafting, and project management. He has worked on projects in various industries for companies like Ford, Toyota, and Visy. The resume outlines his education, skills, work history managing projects for equipment manufacturers, and references.
The document describes the foundry processes at Porwal Auto Components Ltd. It discusses their facilities for casting, molding, melting, and testing. The company manufactures automotive and earthmoving parts using sand casting and cold box molding processes. Equipment includes induction furnaces, molding machines, sand plants, and testing facilities for chemical analysis, hardness testing, and non-destructive testing of castings.
Prism surface coatings pvt ltd is one of the largest Turnkey suppliers of Painting and Powder Coatings plants, lines and has installed over 500 coating lines/plants worldwide. We have also worked for various customers over 25 years across Europe, USA, Asia, Africa and The Middle East for a wide range of industries. We supply to a wide range of Industries such as Automotive Components, Aerospace, Elevators, Aluminum Extrusion & Architectural Components, Valves, Steel / Wood Furniture, Electric Control Panels, Transformer, HHP Engines, Construction Machinery, Wind Mills, Railways, Rail coach / Wagons, Scooter / Motor cycle components, tractors,water boilers,cookwares. Agricultural Machinery, Trucks, Bus Body ,Drums, Cellular Phones...etc
Prism recently has taken over OMT technologies which is a 50 year old German company to form prism group of companies.
Our turnkey plants includes equipment like Shot Blasting Systems,Robotic blasting systems ,Dip and Spray Chemical Pre-treatment plants, Powder Coating Booths and recovery Systems, Dry and Wet type Paint booths/ Spray Booths, Paint Sludge separation and removal Systems, Conveyors, Paint shop -Automation, Ovens,shower tester booths,Teflon coating lines ,enamel coating lines and Effluent Treatment Plants.
The document discusses SolidWorks and its use across various industries including automotive, aerospace, consumer products, education, electronics, engineering services, furniture, heavy equipment, agriculture, industrial components, machinery, medical devices, mold/tool/die, naval, power/civil engineering, and scientific equipment. It lists major SolidWorks customers and largest global accounts for different industries like automotive, aerospace, consumer products, cycles, trailers, yachts, and nautical.
The document provides an overview of ILF Group, an international engineering and consulting firm. It discusses ILF's history, founding in 1967 in Austria. It outlines ILF's areas of business including oil and gas facilities, pipelines, storage tanks, refineries, power plants, water and wastewater treatment. It provides examples of projects completed in these areas around the world. The document also discusses ILF's services, staff, offices globally, and financial information.
This document provides information about Simetri Group, a Turkish manufacturing group with three factories located in different parts of Turkey. Simetri Group consists of Simetri Tanks in Düzce, Simetri Raf in Istanbul, and SHT in Istanbul. Simetri Tanks, located in Düzce on a 35,000 square meter site, produces over 800 types of metal parts and containers, mainly for the automotive industry, including fuel and oil tanks as well as body parts and fixtures. The document outlines Simetri Tanks' production capacities, export markets, turnover, quality policies and certifications, machinery, and long-term investment targets.
Catalog Metal Show 2016 - expozitie industrialaMetal Show
METAL SHOW – expozitie internationala pentru prelucrarea metalelor, scule de precizie, sudura si robotica – se desfasoara in perioada 1- 4 iunie 2016, la Romexpo.
In cadrul targului expozantii vor prezenta: masini-unelte si tehnologii pentru prelucrari prin așchiere, utilaje pentru prelucrarea tablelor, scule de precizie, software industrial, instrumente si masini de masura si control, sudura, robotica, tratamentul suprafetelor, materii prime si semifabricate, prelucrari mecanice, servicii si consultanta.
Spectaculosul eveniment Metal Show 2016 aduce, de la 1 iunie, 4 zile de: expozitie, conferinte, discount-uri, demonstratii live, tehnologii inovative in industria vizata, intalniri cu firme renumite din tara si din strainatate, consultanta si lideri din domeniul tehnologiilor de prelucrare a metalelor, sudurii si roboticii, oferte de job-uri din partea firmelor.
http://www.metalshow.ro/
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
This document provides an overview of an industrial company that has been in operation since 1969. It has over 100 employees, operates across multiple business lines including automotive, aeronautics, and industrial sectors. The company offers various services across its value chain including engineering, welding, machining, assembly, and metrology. It has the internal resources and capabilities to manage industrial turnkey projects.
The main purpose of this catalogue is to illustrate the specific production of firms manufacturing machine tools for the railway sector.
The railway industry has become a major destination for products made by member firms of AFM, as both mainstream manufacturers and auxiliary businesses alike have committed themselves to Spanish machine tools.
Our company's offer for the railway sector focuses on machining, dimensional control and maintenance of wheelsets and the provision of solutions for rails, bogies, carriages, traction system components, etc.
Out of a wide array of specific applications, we might highlight processes such as the grinding of revolving parts designed for the train's traction system, gantry milling, drilling, casting for the making of wheels and rails, the exterior finish on carriages and wheelset turning, boring and dimensional control.
This document provides an overview of a Czech manufacturing company called 5M that produces composite materials. It was founded in 1992 and has 200 employees working in a 5,000 square meter production facility. The company focuses on research and development, investing 7% of annual turnover, and has partnerships with several universities and research institutions. 5M produces composite profiles, sandwich panels, epoxy resins and adhesives that are used in industries like transportation, aviation, construction and sports equipment.
We are the dominant manufacturer of mowing tractors in the Czech Republic and an important supplier of this equipment especially to the EU countries. We have been involved in the mowing business without interruption since 1895.
http://www.secogroup.cz/en/
UDEGA was created from the merger of eight Galician aeronautical companies with over 25 years of experience in the industry. The merger unified work methods and optimized resources to improve efficiency. UDEGA has over 300 staff across engineering, programming, fabrication, and quality control. It provides design, manufacturing, and testing services to clients in aeronautics, automotive, and other industries.
This document provides an overview of forging processes and technology. It discusses the history of forging dating back 6000 years and how steam and water power replaced manual forging in the 18th-19th centuries. It also outlines key modern forging processes like drop forging, describes common forging materials like various grades of steel, and explains factors that influence the accuracy of forged parts.
This technical resume summarizes the qualifications and experience of Adrian Farfaglia in mechanical engineering design, drafting, project management, and construction. It details his 46 years of experience working as a contractor for various manufacturing companies, with responsibilities including design, drafting, project management, and on-site commissioning. His areas of expertise include bulk material handling systems, automation equipment, heavy machinery, tooling, and residential construction. The resume lists his education and training in mechanical design, engineering, and construction. It provides employment history from 1989 to the present, describing his roles and responsibilities on various projects for companies in various industries.
Metal is a Spanish manufacturer of powder metallurgy components founded in 1946. It produces sintered components for automotive engines and transmissions, friction materials for brakes and clutches, and bearings. The company has facilities across Europe and in the US, with products sold in France, Germany, Spain, and other countries. After recent acquisitions, Metal now has two main business units focused on shock absorbers and engine components.
The document provides information about Baumruk & Baumruk s.r.o., a Czech engineering company that specializes in metal manufacturing and railway part production. It details the company's history starting in 1990, facilities, certifications, services including metal fabrication, machining and surface finishing technologies, typical products, and machinery used. The company produces parts for construction equipment and railway vehicles and exports to many European countries.
The document summarizes the products and services offered by A. Stucki Co., an OEM supplier for the railroad industry based in Mexico. It provides steel processing and fabrication services including coil straightening, stamping using presses up to 800 tons, assembly via welding and riveting, heat treatment, and plasma cutting. It also manufactures urethane components, anti-skid floors and platforms, and provides various products for braking systems, suspensions systems, and draft systems for the railroad industry. Key services include stamping, assembly, fabrication, heat treatment, molding of urethane components, and manufacturing of items like brake beams, roll guards, truck bottom rods, and draft gears.
The document summarizes the products and services of Proleter d.o.o., a Serbian metal industry company with decades of experience in mechanical engineering. It produces forgings for industries like electricity, automotive, oil/gas, and railways. It also produces equipment for power transmission lines and railways. Additional products include spare parts, chains, screws, and silumin castings. Services include thermal treatment and surface protection like galvanizing and phosphating. The company aims to modernize, automate processes, and implement a dual education system.
Adrian Farfaglia has over 30 years of experience in mechanical engineering design, drafting, and project management. He has worked on projects in various industries for companies like Ford, Toyota, and Visy. The resume outlines his education, skills, work history managing projects for equipment manufacturers, and references.
The document describes the foundry processes at Porwal Auto Components Ltd. It discusses their facilities for casting, molding, melting, and testing. The company manufactures automotive and earthmoving parts using sand casting and cold box molding processes. Equipment includes induction furnaces, molding machines, sand plants, and testing facilities for chemical analysis, hardness testing, and non-destructive testing of castings.
Prism surface coatings pvt ltd is one of the largest Turnkey suppliers of Painting and Powder Coatings plants, lines and has installed over 500 coating lines/plants worldwide. We have also worked for various customers over 25 years across Europe, USA, Asia, Africa and The Middle East for a wide range of industries. We supply to a wide range of Industries such as Automotive Components, Aerospace, Elevators, Aluminum Extrusion & Architectural Components, Valves, Steel / Wood Furniture, Electric Control Panels, Transformer, HHP Engines, Construction Machinery, Wind Mills, Railways, Rail coach / Wagons, Scooter / Motor cycle components, tractors,water boilers,cookwares. Agricultural Machinery, Trucks, Bus Body ,Drums, Cellular Phones...etc
Prism recently has taken over OMT technologies which is a 50 year old German company to form prism group of companies.
Our turnkey plants includes equipment like Shot Blasting Systems,Robotic blasting systems ,Dip and Spray Chemical Pre-treatment plants, Powder Coating Booths and recovery Systems, Dry and Wet type Paint booths/ Spray Booths, Paint Sludge separation and removal Systems, Conveyors, Paint shop -Automation, Ovens,shower tester booths,Teflon coating lines ,enamel coating lines and Effluent Treatment Plants.
The document discusses SolidWorks and its use across various industries including automotive, aerospace, consumer products, education, electronics, engineering services, furniture, heavy equipment, agriculture, industrial components, machinery, medical devices, mold/tool/die, naval, power/civil engineering, and scientific equipment. It lists major SolidWorks customers and largest global accounts for different industries like automotive, aerospace, consumer products, cycles, trailers, yachts, and nautical.
The document provides an overview of ILF Group, an international engineering and consulting firm. It discusses ILF's history, founding in 1967 in Austria. It outlines ILF's areas of business including oil and gas facilities, pipelines, storage tanks, refineries, power plants, water and wastewater treatment. It provides examples of projects completed in these areas around the world. The document also discusses ILF's services, staff, offices globally, and financial information.
This document provides information about Simetri Group, a Turkish manufacturing group with three factories located in different parts of Turkey. Simetri Group consists of Simetri Tanks in Düzce, Simetri Raf in Istanbul, and SHT in Istanbul. Simetri Tanks, located in Düzce on a 35,000 square meter site, produces over 800 types of metal parts and containers, mainly for the automotive industry, including fuel and oil tanks as well as body parts and fixtures. The document outlines Simetri Tanks' production capacities, export markets, turnover, quality policies and certifications, machinery, and long-term investment targets.
Catalog Metal Show 2016 - expozitie industrialaMetal Show
METAL SHOW – expozitie internationala pentru prelucrarea metalelor, scule de precizie, sudura si robotica – se desfasoara in perioada 1- 4 iunie 2016, la Romexpo.
In cadrul targului expozantii vor prezenta: masini-unelte si tehnologii pentru prelucrari prin așchiere, utilaje pentru prelucrarea tablelor, scule de precizie, software industrial, instrumente si masini de masura si control, sudura, robotica, tratamentul suprafetelor, materii prime si semifabricate, prelucrari mecanice, servicii si consultanta.
Spectaculosul eveniment Metal Show 2016 aduce, de la 1 iunie, 4 zile de: expozitie, conferinte, discount-uri, demonstratii live, tehnologii inovative in industria vizata, intalniri cu firme renumite din tara si din strainatate, consultanta si lideri din domeniul tehnologiilor de prelucrare a metalelor, sudurii si roboticii, oferte de job-uri din partea firmelor.
http://www.metalshow.ro/
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Webinar: Designing a schema for a Data WarehouseFederico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
National Security Agency - NSA mobile device best practices
ELEKTROKARBON
1. carbon products
for transport and industry
RAILW
AYS TRANSPORT
URBA
N
TRANSPORT
POW
E
R
INDUSTRY
ENGI
N
EERING METALLURGY
ENGI
N
EERING INDUSTRY
CHEM
ICAL INDUSTRY
TRADITION
QUALITY
INNOVATIONS
2. Certificates
CARBON DIVISIONTRACTORS DIVISION
BEARINGS DIVISION
The bearings applications for:
• RAILWAYS (boggies, traction motors, gear boxers, auxiliary motors ...)
• AUTOMOTIVE (water pumps, driving units, gear boxes, accessories ...)
• AEROSPACE (engines, rotors, reducers, AC units, starters, generators ...)
•TEXTILE (in non - spindle spinning machines, spinning chamber ...)
• INDUSTRY (engineering, agriculture machines, mining and paper industry ...)
Structure of HTC Holding a.s.
Shareholders structure
of ELEKTROKARBON
Products structure
of ELEKTROKARBON
Semi-products
Carbongraphite brushes
Technical carbon
Electrographite brushes
Metalgraphite brushes
Carbon contact strips
HTC Holding a.s.
Othershareholders
73,5%
26,5%
3 6%
17%
24%25%
26%
The company profile
The beginning of the production of carbon materials is
datedbacktotheyear1950whentheenterprisewasfounded.
Elektrokarbon a.s. was established on 1st May 1992. The
company main business activity is the manufacturing and sale
offinalandsemi-finishedproductsmadefromcarbonmaterials.
The company principal shareholder is HTC Holding a.s.,
Bratislava.
Elektrokarbon a.s. has its own research & developments
facilities including material and testing laboratories of carbon
products.Thecompanyhasestablishedand usesQualitysystem
ISO9001:2000.
The company goal is to develop the production of carbon
materials, to research new grades on customer requirement ba-
sis,tooffermorecomprehensiveattendancetoourcustomersas
wellasintegratedproductsmodules.
The company history
1950 beginningofthecarbonproduction
–productsandmaterials
1962 productionofgranulatePVC
1963 productionofsinteringmetal
1967 ELEKTROKARBON,stateenterpriseTopoľčany
1970 productionofdriedbatterycell
1976 launchedtheproductionofcooperwires
1990 absorptionofproductionofcooperwires
1992 transformationonjointstockventure
1996 jointventureUKARBONinUkraine
1997 acquirementthecerticateofquality
accordingtoISO9001
1998 beginningofrestructuralisationprocess
inthecompany
1999-2002 economicstability,growthofinvestment
andmodernisationintechnology
2003-2012 researchanddevelopmentofprogressive
materials
3. References
MANUFACTURESRS (OEM):
MAGNETON (CZ), TESLA Blatna (CZ),
UNUS (IT), CIMA1915 (IT), AM ITALI (IT),
SCHABMULLER (DE), GEFEG (DE), ENGEL
(DE), ISKRA (SI), DHOLLANDIA (BG), OAO
BATE (BY), LINCOLN (US), ANA IMEP (RO)
RAILWAYS & URBAN TRANSPORT:
ZSSK (SK), ZS CARGO (SK), CD (CZ),
PKP CARGO (PL), UKRZELEZNICA (UA),
ZELEZNICE SRBIJE (XS), SNCFR (RO), CITY
TRANSPORT COMPANIES PRAHA (CZ),
BRNO (CZ), BRATISLAVA (SK), MILANO
(IT), BUDAPEST (HU), KYJEV (UA), TALLIN
(ET), RIGA (LV)
INDUSTRIAL APPLICATIONS:
U.S.STEELKOŠICE(SK),ARCELORMITTAL
STEEL (CZ), HONEYWELL AEROSPACE (CZ),
SCHMETZ (DE), LABEL (FR), AO UST -
KAMENOGORSKIJTM KOMBINAT (KZ)
Production programme
CARBON STRIPS FOR:
• electrical driving vehicles in railways trans-
port (locomotives)
• electrical driving vehicles in urban transport
(tramways, trolley buses)
• industrial applications
CARBON PRODUCTS FORTECHNICAL APPLICATION
• sliding bearings and sealing rings
• blades for rotating compressors and pump
• melting crucibles
• foundry moulds for glass industry
• carbon materials for spectral analyses
CARBON BRUSHES FOR INDUSTRIAL
AND TRACTION MOTORS
• stationary commutator motors
• stationary slip rings motors
• traction commutator motors
CARBON BRUSHES
FOR AUTOMOTIVE INDUSTRY
• starters
• alternators
• DC generators
• auxiliary motors
CARBON BRUSHES
FOR HAND TOOLS
AND HOME APPLIANCES
• stationary commutator motors
• stationary slip rings motors
• traction commutator motors
CARBON SEMI-PRODUCTS
• carbongraphites
• metalgraphites
• electrographites
C
A
R
B
O
N
P
R
O
D
U
C
T
S
4. The measurement of carbon strips tepefaction
The autoclave for copper impregnation of carbon strips
Measurement of carbon strips electric transfer resistance
ELEKTROKARBON a.s.
Tovarnícka 412 • 955 22 Topoľčany • Slovak Republic
e-mail: ekt@elektrokarbon.sk • www.elektrokarbon.sk
Bratislava
Košice
Topoľčany
Bytča
Export territories
Sales representatives
Key:
Bratislava – Bytča: 200 km
Bratislava – Topoľčany: 100 km
Carbon graphites baking in Cremer electric furnace