Electrical power systems design and analysis mohamed e. el-hawary
•
0 likes•44 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Report
Share
Report
Share
Download to read offline
Recommended
Fall11_4_13GezaJoos_IntegrationAndInterconnectionOfDistributedEnergyResources...
This document discusses issues related to integrating distributed energy resources (DER) into electric power grids. It provides background on DER definitions and classifications. It addresses grid integration and interconnection standards, including requirements for steady state and transient operations, protection, and islanding detection. The document outlines considerations for DER protection and control requirements to safely interconnect DER while maintaining grid reliability. It also presents examples of DER installations and research on advanced relay techniques for islanding detection.
tanveerppt-170427091913.pdf
This document discusses unintentional islanding of power systems with distributed resources like solar PV. It defines intentional and unintentional islands, and issues with unintentional islands like safety hazards, overvoltages, and loss of protection. Methods to detect unintentional islands are described, like reverse power relays and active techniques. Simulation results show one technique detecting an island within 0.5 cycles. Guidelines for assessing islanding risk are provided, and the future of anti-islanding techniques discussed, like the potential need for multiple active methods with reduced grid stiffness.
PPT material.pptx
The document discusses several methods for detecting power islands in grid-connected distributed generation systems. Passive detection schemes have a large non-detection zone while active methods can degrade power quality. Intelligent methods that use artificial intelligence techniques like neural networks, fuzzy logic, genetic algorithms and expert systems show promise for quickly and accurately detecting and classifying islanding conditions. The key advantages of these methods are their ability to learn adaptively and generalize while accurately detecting islanding conditions.
Gneration1.ppt
This document provides an overview of a course on power generation systems. The course covers conventional power sources like thermal and hydroelectric plants as well as non-conventional renewable sources like solar and wind. It discusses different methods of power generation including using steam to turn turbines, using the kinetic energy of moving water or wind, and exploiting nuclear reactions. The document compares various energy sources based on their initial costs, running costs, limitations, and sustainability. Students will learn about electrical power generation and the key players and sources that make up Pakistan's power sector.
PrabhuPresent.ppt
This document discusses the implications of distributed generation islanding on power system dynamics. It begins by defining islanding as the phenomenon where a distributed generator continues to power a location even after that location is electrically isolated from the central distribution network. If unintentional islanding occurs, it can pose safety hazards and damage equipment if the distributed generator's voltage and frequency are not properly regulated. The document also discusses out-of-phase reclosing, which produces high transient currents that can damage equipment. It then examines various active anti-islanding methods and notes their dynamic impacts, such as unnecessary tripping from undervoltage events. While anti-islanding protection prevents problems now, the document warns its effects could degrade power quality and stability as distributed
Adaptation of Chinese Culture .pptx
Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture
Capacitor Cabinet-RAM 2.1-3600-0.3Y.pdf
The document provides installation instructions and specifications for capacitors, including that a minimum 50mm gap is required between capacitors, the air temperature must not exceed 65 degrees Celsius, and the bottom of copper bars should be at least 180mm above capacitor terminals to avoid magnetic interference. It also lists technical parameters for the capacitors such as voltage, frequency, amps, weight, and individual kvar and MFD specifications for 5 capacitors along with an internal wiring diagram and date.
1337683699.3104Lecture 07 - Synchronous machines.ppt
This document discusses the construction and operation of synchronous machines. It describes how synchronous generators have rotors that produce a rotating magnetic field from DC current in field windings. Synchronous motors have stators that produce a rotating magnetic field to turn the rotor. Large generators use brushless exciters to supply DC current to rotor windings without mechanical contact. Equivalent circuits are presented showing how armature reaction affects the relationship between internally generated and terminal voltages. Phasor diagrams illustrate voltage and current relationships for different power factors.
Recommended
Fall11_4_13GezaJoos_IntegrationAndInterconnectionOfDistributedEnergyResources...
This document discusses issues related to integrating distributed energy resources (DER) into electric power grids. It provides background on DER definitions and classifications. It addresses grid integration and interconnection standards, including requirements for steady state and transient operations, protection, and islanding detection. The document outlines considerations for DER protection and control requirements to safely interconnect DER while maintaining grid reliability. It also presents examples of DER installations and research on advanced relay techniques for islanding detection.
tanveerppt-170427091913.pdf
This document discusses unintentional islanding of power systems with distributed resources like solar PV. It defines intentional and unintentional islands, and issues with unintentional islands like safety hazards, overvoltages, and loss of protection. Methods to detect unintentional islands are described, like reverse power relays and active techniques. Simulation results show one technique detecting an island within 0.5 cycles. Guidelines for assessing islanding risk are provided, and the future of anti-islanding techniques discussed, like the potential need for multiple active methods with reduced grid stiffness.
PPT material.pptx
The document discusses several methods for detecting power islands in grid-connected distributed generation systems. Passive detection schemes have a large non-detection zone while active methods can degrade power quality. Intelligent methods that use artificial intelligence techniques like neural networks, fuzzy logic, genetic algorithms and expert systems show promise for quickly and accurately detecting and classifying islanding conditions. The key advantages of these methods are their ability to learn adaptively and generalize while accurately detecting islanding conditions.
Gneration1.ppt
This document provides an overview of a course on power generation systems. The course covers conventional power sources like thermal and hydroelectric plants as well as non-conventional renewable sources like solar and wind. It discusses different methods of power generation including using steam to turn turbines, using the kinetic energy of moving water or wind, and exploiting nuclear reactions. The document compares various energy sources based on their initial costs, running costs, limitations, and sustainability. Students will learn about electrical power generation and the key players and sources that make up Pakistan's power sector.
PrabhuPresent.ppt
This document discusses the implications of distributed generation islanding on power system dynamics. It begins by defining islanding as the phenomenon where a distributed generator continues to power a location even after that location is electrically isolated from the central distribution network. If unintentional islanding occurs, it can pose safety hazards and damage equipment if the distributed generator's voltage and frequency are not properly regulated. The document also discusses out-of-phase reclosing, which produces high transient currents that can damage equipment. It then examines various active anti-islanding methods and notes their dynamic impacts, such as unnecessary tripping from undervoltage events. While anti-islanding protection prevents problems now, the document warns its effects could degrade power quality and stability as distributed
Adaptation of Chinese Culture .pptx
Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture
Capacitor Cabinet-RAM 2.1-3600-0.3Y.pdf
The document provides installation instructions and specifications for capacitors, including that a minimum 50mm gap is required between capacitors, the air temperature must not exceed 65 degrees Celsius, and the bottom of copper bars should be at least 180mm above capacitor terminals to avoid magnetic interference. It also lists technical parameters for the capacitors such as voltage, frequency, amps, weight, and individual kvar and MFD specifications for 5 capacitors along with an internal wiring diagram and date.
1337683699.3104Lecture 07 - Synchronous machines.ppt
This document discusses the construction and operation of synchronous machines. It describes how synchronous generators have rotors that produce a rotating magnetic field from DC current in field windings. Synchronous motors have stators that produce a rotating magnetic field to turn the rotor. Large generators use brushless exciters to supply DC current to rotor windings without mechanical contact. Equivalent circuits are presented showing how armature reaction affects the relationship between internally generated and terminal voltages. Phasor diagrams illustrate voltage and current relationships for different power factors.
1337683622.6252Lecture 05 - DC motors.ppt
This document provides an overview of a lecture on DC motors. It begins with preliminary notes stating that DC motors have applications in automobiles, aircraft and portable electronics due to their ability to easily control speed. It then discusses the simplest DC machine, which consists of a single rotating loop of wire. The document explains how a voltage is induced in the rotating loop and how a commutator can be added to convert the alternating voltage to a direct voltage. It further discusses how this simplest machine demonstrates the basic principles of induced voltage, torque, and commutation that apply to real DC machines.
2730.ppt
Synchronous motors and generators operate by synchronizing the rotation of the rotor's magnetic field with the rotating magnetic field produced by the stator windings. Synchronous motors are used for constant-speed applications like propulsion for large ships. They work by locking the rotor's magnetic field to the rotating stator field. Synchronous generators can be produced by transitioning a synchronous motor driven by a turbine from motor to generator operation as the power angle shifts from negative to positive.
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
This document provides an introduction to power electronics. It defines power electronics as technology used to change the characteristics of electrical power to suit applications. The document outlines the history and types of power semiconductor devices like diodes, thyristors, MOSFETs and IGBTs. It also describes different types of power converters including rectifiers, inverters, and DC-DC converters. Thermal management of power devices is also discussed.
Electrical Engineering Objective Type Questions.pdf
This document contains a list of objective type questions for the Electrical Engineering department at Government College of Engineering in Bargur, prepared by assistant professor V. Arivumani. It includes 875 total questions organized under various topics related to electrical engineering, such as DC generators, DC motors, transformers, induction motors, synchronous motors, transmission and distribution, and cables. The questions cover concepts like generator construction, winding types, armature reaction, commutation, and parallel operation of generators. Sample questions and answers are provided for the topic of DC generators.
Job Hunting Techniques for UAE.pptx
This document provides job hunting techniques for those seeking employment in the United Arab Emirates (UAE). It outlines steps such as defining one's career interests, obtaining necessary documents like a passport and degree attestation, creating a strong resume and cover letter, applying for jobs online from home country or during a visit to UAE, and preparing for interviews. Useful online resources and job sites are also listed to facilitate the job searching process in UAE.
lachhab2013.pdf
This document presents a fractional order PID controller (FOPID)-Toolbox to design robust fractional PID controllers. The toolbox uses nonsmooth optimization techniques to optimize the parameters of fractional PIαDβ and (PID)n controllers to achieve a desired crossover frequency and phase margin. The goal is to develop a systematic method to optimize the parameters of these fractional order controllers based on expressing the control problem and requirements in terms of a desired open-loop response and using a loop shaping configuration. An algorithm is proposed that initializes the fractional orders, computes the gradient with respect to the orders, and iteratively updates the orders using steepest descent until convergence.
sikder2018.pdf
This document describes research into using a fractional order PID (FOPID) controller to control voltage fluctuations in an islanded microgrid with a single power source. The proposed FOPID controller has more tuning parameters than a standard PID controller, allowing it to better regulate the microgrid's output voltage under different load conditions and uncertainties. The controller is designed using an optimization technique to maximize system performance. Simulation results show the FOPID controller is effective at reducing voltage fluctuations and provides a fast, robust response for the microgrid system.
ppt nrel.pptx
This document discusses unintentional islands in power systems with distributed resources and methods to prevent them. It defines types of islands and issues they can cause. It outlines standard testing and requirements for distributed resources to detect and cease energizing an unintentional island within 2 seconds. Various passive, active and communication-based anti-islanding protection methods are described to meet this requirement.
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
This document proposes a new modulation strategy called SVM-plus-phase-shift (SVM-PS) modulation for a single-stage three-phase resonant AC-DC matrix converter with an LCL resonant tank. The strategy aims to achieve unity power factor and flexible control of active and reactive power transfer. It derives the relationship between switch states and line-frequency phase currents based on the fundamental component of the tank current. This allows simple control of current amplitude and phase via modulation of the AC and DC side switches based on voltage and current references. Simulation results show the proposed strategy reduces current distortion and ripple compared to conventional SVM.
Multiphase Converters.pdf
This document discusses multiphase power converters. It begins by defining multiphase converters as those with more than three phases, which are an extension of three-phase converters with additional legs. Multiphase converters are used in applications involving AC to DC, DC to AC, AC to AC, and DC to DC conversion. They provide advantages like enhanced torque density, lower torque pulsation, higher frequency ripple, lower per-leg current rating, greater fault tolerance, and lower harmonic losses. The document goes on to describe types of multiphase converters and their applications in areas like adjustable speed drives, renewable energy systems, and electric vehicles.
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
This document summarizes space vector transformations of three-phase systems. It discusses symmetrical components analysis in the frequency and time domains, which allows decomposition of an unbalanced three-phase system into positive, negative, and zero sequence components. It also describes Clarke's transformation to a stationary αβ0 reference frame, which defines three independent real components from the complex positive and negative sequence components.
09_chapter4SPACEVECTORPULSEWIDTHMODULATION.pdf
This document discusses space vector pulse width modulation (SVPWM) techniques for multilevel inverters. It begins by introducing SVPWM and explaining that it provides advantages over sinusoidal PWM, including better fundamental output voltage and improved harmonic performance. It then defines two-dimensional and three-dimensional space vectors and discusses how SVPWM can be implemented in both 2D and 3D. The document focuses on SVPWM for three-leg voltage source inverters, describing the voltage space vectors and how SVPWM can be used to synthesize the required output voltage vector through PWM of the switching state vectors.
Atp book
This document provides an introduction to using the ATP/EMTP software for simulating electrical systems transients. It discusses how to create data files for simulations using either ATPDraw, a graphical preprocessor, or by directly editing text files. It also describes running simulations and viewing results. The document is intended to introduce beginners to the ATP/EMTP software by following existing manuals on its usage and capabilities. It emphasizes that expertise requires experience working with the software and suggests consulting manuals and experts for in-depth knowledge of complex simulations.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
More Related Content
More from gulie
1337683622.6252Lecture 05 - DC motors.ppt
This document provides an overview of a lecture on DC motors. It begins with preliminary notes stating that DC motors have applications in automobiles, aircraft and portable electronics due to their ability to easily control speed. It then discusses the simplest DC machine, which consists of a single rotating loop of wire. The document explains how a voltage is induced in the rotating loop and how a commutator can be added to convert the alternating voltage to a direct voltage. It further discusses how this simplest machine demonstrates the basic principles of induced voltage, torque, and commutation that apply to real DC machines.
2730.ppt
Synchronous motors and generators operate by synchronizing the rotation of the rotor's magnetic field with the rotating magnetic field produced by the stator windings. Synchronous motors are used for constant-speed applications like propulsion for large ships. They work by locking the rotor's magnetic field to the rotating stator field. Synchronous generators can be produced by transitioning a synchronous motor driven by a turbine from motor to generator operation as the power angle shifts from negative to positive.
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
This document provides an introduction to power electronics. It defines power electronics as technology used to change the characteristics of electrical power to suit applications. The document outlines the history and types of power semiconductor devices like diodes, thyristors, MOSFETs and IGBTs. It also describes different types of power converters including rectifiers, inverters, and DC-DC converters. Thermal management of power devices is also discussed.
Electrical Engineering Objective Type Questions.pdf
This document contains a list of objective type questions for the Electrical Engineering department at Government College of Engineering in Bargur, prepared by assistant professor V. Arivumani. It includes 875 total questions organized under various topics related to electrical engineering, such as DC generators, DC motors, transformers, induction motors, synchronous motors, transmission and distribution, and cables. The questions cover concepts like generator construction, winding types, armature reaction, commutation, and parallel operation of generators. Sample questions and answers are provided for the topic of DC generators.
Job Hunting Techniques for UAE.pptx
This document provides job hunting techniques for those seeking employment in the United Arab Emirates (UAE). It outlines steps such as defining one's career interests, obtaining necessary documents like a passport and degree attestation, creating a strong resume and cover letter, applying for jobs online from home country or during a visit to UAE, and preparing for interviews. Useful online resources and job sites are also listed to facilitate the job searching process in UAE.
lachhab2013.pdf
This document presents a fractional order PID controller (FOPID)-Toolbox to design robust fractional PID controllers. The toolbox uses nonsmooth optimization techniques to optimize the parameters of fractional PIαDβ and (PID)n controllers to achieve a desired crossover frequency and phase margin. The goal is to develop a systematic method to optimize the parameters of these fractional order controllers based on expressing the control problem and requirements in terms of a desired open-loop response and using a loop shaping configuration. An algorithm is proposed that initializes the fractional orders, computes the gradient with respect to the orders, and iteratively updates the orders using steepest descent until convergence.
sikder2018.pdf
This document describes research into using a fractional order PID (FOPID) controller to control voltage fluctuations in an islanded microgrid with a single power source. The proposed FOPID controller has more tuning parameters than a standard PID controller, allowing it to better regulate the microgrid's output voltage under different load conditions and uncertainties. The controller is designed using an optimization technique to maximize system performance. Simulation results show the FOPID controller is effective at reducing voltage fluctuations and provides a fast, robust response for the microgrid system.
ppt nrel.pptx
This document discusses unintentional islands in power systems with distributed resources and methods to prevent them. It defines types of islands and issues they can cause. It outlines standard testing and requirements for distributed resources to detect and cease energizing an unintentional island within 2 seconds. Various passive, active and communication-based anti-islanding protection methods are described to meet this requirement.
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
This document proposes a new modulation strategy called SVM-plus-phase-shift (SVM-PS) modulation for a single-stage three-phase resonant AC-DC matrix converter with an LCL resonant tank. The strategy aims to achieve unity power factor and flexible control of active and reactive power transfer. It derives the relationship between switch states and line-frequency phase currents based on the fundamental component of the tank current. This allows simple control of current amplitude and phase via modulation of the AC and DC side switches based on voltage and current references. Simulation results show the proposed strategy reduces current distortion and ripple compared to conventional SVM.
Multiphase Converters.pdf
This document discusses multiphase power converters. It begins by defining multiphase converters as those with more than three phases, which are an extension of three-phase converters with additional legs. Multiphase converters are used in applications involving AC to DC, DC to AC, AC to AC, and DC to DC conversion. They provide advantages like enhanced torque density, lower torque pulsation, higher frequency ripple, lower per-leg current rating, greater fault tolerance, and lower harmonic losses. The document goes on to describe types of multiphase converters and their applications in areas like adjustable speed drives, renewable energy systems, and electric vehicles.
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
This document summarizes space vector transformations of three-phase systems. It discusses symmetrical components analysis in the frequency and time domains, which allows decomposition of an unbalanced three-phase system into positive, negative, and zero sequence components. It also describes Clarke's transformation to a stationary αβ0 reference frame, which defines three independent real components from the complex positive and negative sequence components.
09_chapter4SPACEVECTORPULSEWIDTHMODULATION.pdf
This document discusses space vector pulse width modulation (SVPWM) techniques for multilevel inverters. It begins by introducing SVPWM and explaining that it provides advantages over sinusoidal PWM, including better fundamental output voltage and improved harmonic performance. It then defines two-dimensional and three-dimensional space vectors and discusses how SVPWM can be implemented in both 2D and 3D. The document focuses on SVPWM for three-leg voltage source inverters, describing the voltage space vectors and how SVPWM can be used to synthesize the required output voltage vector through PWM of the switching state vectors.
Atp book
This document provides an introduction to using the ATP/EMTP software for simulating electrical systems transients. It discusses how to create data files for simulations using either ATPDraw, a graphical preprocessor, or by directly editing text files. It also describes running simulations and viewing results. The document is intended to introduce beginners to the ATP/EMTP software by following existing manuals on its usage and capabilities. It emphasizes that expertise requires experience working with the software and suggests consulting manuals and experts for in-depth knowledge of complex simulations.
More from gulie (13)
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
Electrical Engineering Objective Type Questions.pdf
Electrical Engineering Objective Type Questions.pdf
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
Recently uploaded
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf