Capacitor Cabinet-RAM 2.1-3600-0.3Y.pdf
•
0 likes•3 views
The document provides installation instructions and specifications for capacitors, including that a minimum 50mm gap is required between capacitors, the air temperature must not exceed 65 degrees Celsius, and the bottom of copper bars should be at least 180mm above capacitor terminals to avoid magnetic interference. It also lists technical parameters for the capacitors such as voltage, frequency, amps, weight, and individual kvar and MFD specifications for 5 capacitors along with an internal wiring diagram and date.
Report
Share
Report
Share
Download to read offline
Recommended
Fall11_4_13GezaJoos_IntegrationAndInterconnectionOfDistributedEnergyResources...
This document discusses issues related to integrating distributed energy resources (DER) into electric power grids. It provides background on DER definitions and classifications. It addresses grid integration and interconnection standards, including requirements for steady state and transient operations, protection, and islanding detection. The document outlines considerations for DER protection and control requirements to safely interconnect DER while maintaining grid reliability. It also presents examples of DER installations and research on advanced relay techniques for islanding detection.
tanveerppt-170427091913.pdf
This document discusses unintentional islanding of power systems with distributed resources like solar PV. It defines intentional and unintentional islands, and issues with unintentional islands like safety hazards, overvoltages, and loss of protection. Methods to detect unintentional islands are described, like reverse power relays and active techniques. Simulation results show one technique detecting an island within 0.5 cycles. Guidelines for assessing islanding risk are provided, and the future of anti-islanding techniques discussed, like the potential need for multiple active methods with reduced grid stiffness.
PPT material.pptx
The document discusses several methods for detecting power islands in grid-connected distributed generation systems. Passive detection schemes have a large non-detection zone while active methods can degrade power quality. Intelligent methods that use artificial intelligence techniques like neural networks, fuzzy logic, genetic algorithms and expert systems show promise for quickly and accurately detecting and classifying islanding conditions. The key advantages of these methods are their ability to learn adaptively and generalize while accurately detecting islanding conditions.
Gneration1.ppt
This document provides an overview of a course on power generation systems. The course covers conventional power sources like thermal and hydroelectric plants as well as non-conventional renewable sources like solar and wind. It discusses different methods of power generation including using steam to turn turbines, using the kinetic energy of moving water or wind, and exploiting nuclear reactions. The document compares various energy sources based on their initial costs, running costs, limitations, and sustainability. Students will learn about electrical power generation and the key players and sources that make up Pakistan's power sector.
PrabhuPresent.ppt
This document discusses the implications of distributed generation islanding on power system dynamics. It begins by defining islanding as the phenomenon where a distributed generator continues to power a location even after that location is electrically isolated from the central distribution network. If unintentional islanding occurs, it can pose safety hazards and damage equipment if the distributed generator's voltage and frequency are not properly regulated. The document also discusses out-of-phase reclosing, which produces high transient currents that can damage equipment. It then examines various active anti-islanding methods and notes their dynamic impacts, such as unnecessary tripping from undervoltage events. While anti-islanding protection prevents problems now, the document warns its effects could degrade power quality and stability as distributed
Adaptation of Chinese Culture .pptx
Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture
1337683699.3104Lecture 07 - Synchronous machines.ppt
This document discusses the construction and operation of synchronous machines. It describes how synchronous generators have rotors that produce a rotating magnetic field from DC current in field windings. Synchronous motors have stators that produce a rotating magnetic field to turn the rotor. Large generators use brushless exciters to supply DC current to rotor windings without mechanical contact. Equivalent circuits are presented showing how armature reaction affects the relationship between internally generated and terminal voltages. Phasor diagrams illustrate voltage and current relationships for different power factors.
1337683622.6252Lecture 05 - DC motors.ppt
This document provides an overview of a lecture on DC motors. It begins with preliminary notes stating that DC motors have applications in automobiles, aircraft and portable electronics due to their ability to easily control speed. It then discusses the simplest DC machine, which consists of a single rotating loop of wire. The document explains how a voltage is induced in the rotating loop and how a commutator can be added to convert the alternating voltage to a direct voltage. It further discusses how this simplest machine demonstrates the basic principles of induced voltage, torque, and commutation that apply to real DC machines.
Recommended
Fall11_4_13GezaJoos_IntegrationAndInterconnectionOfDistributedEnergyResources...
This document discusses issues related to integrating distributed energy resources (DER) into electric power grids. It provides background on DER definitions and classifications. It addresses grid integration and interconnection standards, including requirements for steady state and transient operations, protection, and islanding detection. The document outlines considerations for DER protection and control requirements to safely interconnect DER while maintaining grid reliability. It also presents examples of DER installations and research on advanced relay techniques for islanding detection.
tanveerppt-170427091913.pdf
This document discusses unintentional islanding of power systems with distributed resources like solar PV. It defines intentional and unintentional islands, and issues with unintentional islands like safety hazards, overvoltages, and loss of protection. Methods to detect unintentional islands are described, like reverse power relays and active techniques. Simulation results show one technique detecting an island within 0.5 cycles. Guidelines for assessing islanding risk are provided, and the future of anti-islanding techniques discussed, like the potential need for multiple active methods with reduced grid stiffness.
PPT material.pptx
The document discusses several methods for detecting power islands in grid-connected distributed generation systems. Passive detection schemes have a large non-detection zone while active methods can degrade power quality. Intelligent methods that use artificial intelligence techniques like neural networks, fuzzy logic, genetic algorithms and expert systems show promise for quickly and accurately detecting and classifying islanding conditions. The key advantages of these methods are their ability to learn adaptively and generalize while accurately detecting islanding conditions.
Gneration1.ppt
This document provides an overview of a course on power generation systems. The course covers conventional power sources like thermal and hydroelectric plants as well as non-conventional renewable sources like solar and wind. It discusses different methods of power generation including using steam to turn turbines, using the kinetic energy of moving water or wind, and exploiting nuclear reactions. The document compares various energy sources based on their initial costs, running costs, limitations, and sustainability. Students will learn about electrical power generation and the key players and sources that make up Pakistan's power sector.
PrabhuPresent.ppt
This document discusses the implications of distributed generation islanding on power system dynamics. It begins by defining islanding as the phenomenon where a distributed generator continues to power a location even after that location is electrically isolated from the central distribution network. If unintentional islanding occurs, it can pose safety hazards and damage equipment if the distributed generator's voltage and frequency are not properly regulated. The document also discusses out-of-phase reclosing, which produces high transient currents that can damage equipment. It then examines various active anti-islanding methods and notes their dynamic impacts, such as unnecessary tripping from undervoltage events. While anti-islanding protection prevents problems now, the document warns its effects could degrade power quality and stability as distributed
Adaptation of Chinese Culture .pptx
Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture Adaptation of Chinese Culture
1337683699.3104Lecture 07 - Synchronous machines.ppt
This document discusses the construction and operation of synchronous machines. It describes how synchronous generators have rotors that produce a rotating magnetic field from DC current in field windings. Synchronous motors have stators that produce a rotating magnetic field to turn the rotor. Large generators use brushless exciters to supply DC current to rotor windings without mechanical contact. Equivalent circuits are presented showing how armature reaction affects the relationship between internally generated and terminal voltages. Phasor diagrams illustrate voltage and current relationships for different power factors.
1337683622.6252Lecture 05 - DC motors.ppt
This document provides an overview of a lecture on DC motors. It begins with preliminary notes stating that DC motors have applications in automobiles, aircraft and portable electronics due to their ability to easily control speed. It then discusses the simplest DC machine, which consists of a single rotating loop of wire. The document explains how a voltage is induced in the rotating loop and how a commutator can be added to convert the alternating voltage to a direct voltage. It further discusses how this simplest machine demonstrates the basic principles of induced voltage, torque, and commutation that apply to real DC machines.
2730.ppt
Synchronous motors and generators operate by synchronizing the rotation of the rotor's magnetic field with the rotating magnetic field produced by the stator windings. Synchronous motors are used for constant-speed applications like propulsion for large ships. They work by locking the rotor's magnetic field to the rotating stator field. Synchronous generators can be produced by transitioning a synchronous motor driven by a turbine from motor to generator operation as the power angle shifts from negative to positive.
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
This document provides an introduction to power electronics. It defines power electronics as technology used to change the characteristics of electrical power to suit applications. The document outlines the history and types of power semiconductor devices like diodes, thyristors, MOSFETs and IGBTs. It also describes different types of power converters including rectifiers, inverters, and DC-DC converters. Thermal management of power devices is also discussed.
Electrical Engineering Objective Type Questions.pdf
This document contains a list of objective type questions for the Electrical Engineering department at Government College of Engineering in Bargur, prepared by assistant professor V. Arivumani. It includes 875 total questions organized under various topics related to electrical engineering, such as DC generators, DC motors, transformers, induction motors, synchronous motors, transmission and distribution, and cables. The questions cover concepts like generator construction, winding types, armature reaction, commutation, and parallel operation of generators. Sample questions and answers are provided for the topic of DC generators.
Job Hunting Techniques for UAE.pptx
This document provides job hunting techniques for those seeking employment in the United Arab Emirates (UAE). It outlines steps such as defining one's career interests, obtaining necessary documents like a passport and degree attestation, creating a strong resume and cover letter, applying for jobs online from home country or during a visit to UAE, and preparing for interviews. Useful online resources and job sites are also listed to facilitate the job searching process in UAE.
lachhab2013.pdf
This document presents a fractional order PID controller (FOPID)-Toolbox to design robust fractional PID controllers. The toolbox uses nonsmooth optimization techniques to optimize the parameters of fractional PIαDβ and (PID)n controllers to achieve a desired crossover frequency and phase margin. The goal is to develop a systematic method to optimize the parameters of these fractional order controllers based on expressing the control problem and requirements in terms of a desired open-loop response and using a loop shaping configuration. An algorithm is proposed that initializes the fractional orders, computes the gradient with respect to the orders, and iteratively updates the orders using steepest descent until convergence.
sikder2018.pdf
This document describes research into using a fractional order PID (FOPID) controller to control voltage fluctuations in an islanded microgrid with a single power source. The proposed FOPID controller has more tuning parameters than a standard PID controller, allowing it to better regulate the microgrid's output voltage under different load conditions and uncertainties. The controller is designed using an optimization technique to maximize system performance. Simulation results show the FOPID controller is effective at reducing voltage fluctuations and provides a fast, robust response for the microgrid system.
ppt nrel.pptx
This document discusses unintentional islands in power systems with distributed resources and methods to prevent them. It defines types of islands and issues they can cause. It outlines standard testing and requirements for distributed resources to detect and cease energizing an unintentional island within 2 seconds. Various passive, active and communication-based anti-islanding protection methods are described to meet this requirement.
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
This document proposes a new modulation strategy called SVM-plus-phase-shift (SVM-PS) modulation for a single-stage three-phase resonant AC-DC matrix converter with an LCL resonant tank. The strategy aims to achieve unity power factor and flexible control of active and reactive power transfer. It derives the relationship between switch states and line-frequency phase currents based on the fundamental component of the tank current. This allows simple control of current amplitude and phase via modulation of the AC and DC side switches based on voltage and current references. Simulation results show the proposed strategy reduces current distortion and ripple compared to conventional SVM.
Multiphase Converters.pdf
This document discusses multiphase power converters. It begins by defining multiphase converters as those with more than three phases, which are an extension of three-phase converters with additional legs. Multiphase converters are used in applications involving AC to DC, DC to AC, AC to AC, and DC to DC conversion. They provide advantages like enhanced torque density, lower torque pulsation, higher frequency ripple, lower per-leg current rating, greater fault tolerance, and lower harmonic losses. The document goes on to describe types of multiphase converters and their applications in areas like adjustable speed drives, renewable energy systems, and electric vehicles.
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
This document summarizes space vector transformations of three-phase systems. It discusses symmetrical components analysis in the frequency and time domains, which allows decomposition of an unbalanced three-phase system into positive, negative, and zero sequence components. It also describes Clarke's transformation to a stationary αβ0 reference frame, which defines three independent real components from the complex positive and negative sequence components.
09_chapter4SPACEVECTORPULSEWIDTHMODULATION.pdf
This document discusses space vector pulse width modulation (SVPWM) techniques for multilevel inverters. It begins by introducing SVPWM and explaining that it provides advantages over sinusoidal PWM, including better fundamental output voltage and improved harmonic performance. It then defines two-dimensional and three-dimensional space vectors and discusses how SVPWM can be implemented in both 2D and 3D. The document focuses on SVPWM for three-leg voltage source inverters, describing the voltage space vectors and how SVPWM can be used to synthesize the required output voltage vector through PWM of the switching state vectors.
Atp book
This document provides an introduction to using the ATP/EMTP software for simulating electrical systems transients. It discusses how to create data files for simulations using either ATPDraw, a graphical preprocessor, or by directly editing text files. It also describes running simulations and viewing results. The document is intended to introduce beginners to the ATP/EMTP software by following existing manuals on its usage and capabilities. It emphasizes that expertise requires experience working with the software and suggests consulting manuals and experts for in-depth knowledge of complex simulations.
Electrical power systems design and analysis mohamed e. el-hawary
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
More Related Content
More from gulie
2730.ppt
Synchronous motors and generators operate by synchronizing the rotation of the rotor's magnetic field with the rotating magnetic field produced by the stator windings. Synchronous motors are used for constant-speed applications like propulsion for large ships. They work by locking the rotor's magnetic field to the rotating stator field. Synchronous generators can be produced by transitioning a synchronous motor driven by a turbine from motor to generator operation as the power angle shifts from negative to positive.
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
This document provides an introduction to power electronics. It defines power electronics as technology used to change the characteristics of electrical power to suit applications. The document outlines the history and types of power semiconductor devices like diodes, thyristors, MOSFETs and IGBTs. It also describes different types of power converters including rectifiers, inverters, and DC-DC converters. Thermal management of power devices is also discussed.
Electrical Engineering Objective Type Questions.pdf
This document contains a list of objective type questions for the Electrical Engineering department at Government College of Engineering in Bargur, prepared by assistant professor V. Arivumani. It includes 875 total questions organized under various topics related to electrical engineering, such as DC generators, DC motors, transformers, induction motors, synchronous motors, transmission and distribution, and cables. The questions cover concepts like generator construction, winding types, armature reaction, commutation, and parallel operation of generators. Sample questions and answers are provided for the topic of DC generators.
Job Hunting Techniques for UAE.pptx
This document provides job hunting techniques for those seeking employment in the United Arab Emirates (UAE). It outlines steps such as defining one's career interests, obtaining necessary documents like a passport and degree attestation, creating a strong resume and cover letter, applying for jobs online from home country or during a visit to UAE, and preparing for interviews. Useful online resources and job sites are also listed to facilitate the job searching process in UAE.
lachhab2013.pdf
This document presents a fractional order PID controller (FOPID)-Toolbox to design robust fractional PID controllers. The toolbox uses nonsmooth optimization techniques to optimize the parameters of fractional PIαDβ and (PID)n controllers to achieve a desired crossover frequency and phase margin. The goal is to develop a systematic method to optimize the parameters of these fractional order controllers based on expressing the control problem and requirements in terms of a desired open-loop response and using a loop shaping configuration. An algorithm is proposed that initializes the fractional orders, computes the gradient with respect to the orders, and iteratively updates the orders using steepest descent until convergence.
sikder2018.pdf
This document describes research into using a fractional order PID (FOPID) controller to control voltage fluctuations in an islanded microgrid with a single power source. The proposed FOPID controller has more tuning parameters than a standard PID controller, allowing it to better regulate the microgrid's output voltage under different load conditions and uncertainties. The controller is designed using an optimization technique to maximize system performance. Simulation results show the FOPID controller is effective at reducing voltage fluctuations and provides a fast, robust response for the microgrid system.
ppt nrel.pptx
This document discusses unintentional islands in power systems with distributed resources and methods to prevent them. It defines types of islands and issues they can cause. It outlines standard testing and requirements for distributed resources to detect and cease energizing an unintentional island within 2 seconds. Various passive, active and communication-based anti-islanding protection methods are described to meet this requirement.
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
This document proposes a new modulation strategy called SVM-plus-phase-shift (SVM-PS) modulation for a single-stage three-phase resonant AC-DC matrix converter with an LCL resonant tank. The strategy aims to achieve unity power factor and flexible control of active and reactive power transfer. It derives the relationship between switch states and line-frequency phase currents based on the fundamental component of the tank current. This allows simple control of current amplitude and phase via modulation of the AC and DC side switches based on voltage and current references. Simulation results show the proposed strategy reduces current distortion and ripple compared to conventional SVM.
Multiphase Converters.pdf
This document discusses multiphase power converters. It begins by defining multiphase converters as those with more than three phases, which are an extension of three-phase converters with additional legs. Multiphase converters are used in applications involving AC to DC, DC to AC, AC to AC, and DC to DC conversion. They provide advantages like enhanced torque density, lower torque pulsation, higher frequency ripple, lower per-leg current rating, greater fault tolerance, and lower harmonic losses. The document goes on to describe types of multiphase converters and their applications in areas like adjustable speed drives, renewable energy systems, and electric vehicles.
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
This document summarizes space vector transformations of three-phase systems. It discusses symmetrical components analysis in the frequency and time domains, which allows decomposition of an unbalanced three-phase system into positive, negative, and zero sequence components. It also describes Clarke's transformation to a stationary αβ0 reference frame, which defines three independent real components from the complex positive and negative sequence components.
09_chapter4SPACEVECTORPULSEWIDTHMODULATION.pdf
This document discusses space vector pulse width modulation (SVPWM) techniques for multilevel inverters. It begins by introducing SVPWM and explaining that it provides advantages over sinusoidal PWM, including better fundamental output voltage and improved harmonic performance. It then defines two-dimensional and three-dimensional space vectors and discusses how SVPWM can be implemented in both 2D and 3D. The document focuses on SVPWM for three-leg voltage source inverters, describing the voltage space vectors and how SVPWM can be used to synthesize the required output voltage vector through PWM of the switching state vectors.
Atp book
This document provides an introduction to using the ATP/EMTP software for simulating electrical systems transients. It discusses how to create data files for simulations using either ATPDraw, a graphical preprocessor, or by directly editing text files. It also describes running simulations and viewing results. The document is intended to introduce beginners to the ATP/EMTP software by following existing manuals on its usage and capabilities. It emphasizes that expertise requires experience working with the software and suggests consulting manuals and experts for in-depth knowledge of complex simulations.
Electrical power systems design and analysis mohamed e. el-hawary
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
More from gulie (13)
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
Basic Power Electronics Concepts_Ozipineci_ORNL.pdf
Electrical Engineering Objective Type Questions.pdf
Electrical Engineering Objective Type Questions.pdf
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
SVM-plus-Phase-Shift Modulation Strategy for Single-Stage.pdf
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
Grid Converters for Photovoltaic and Wind Power Systems - 2010 - Teodorescu -...
Electrical power systems design and analysis mohamed e. el-hawary
Electrical power systems design and analysis mohamed e. el-hawary
Recently uploaded
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Capacitor Cabinet-RAM 2.1-3600-0.3Y.pdf
- 1. 2100 300 433 1714 3600 Special Note: 1. When installing and using, the minimum gap between capacitors should not be less than 50mm; 2. The air temperature around the capacitor is not more than 3. The adverse effect of external current magnetic field on the capacitor should be avoided. It is recommended that the minimum distance between the bottom edge of the main copper bar and the top of the capacitor terminal is not less than 180mm. 720 1 2 3 4 M16 73 0 5 50 230 4 3 2 0 0 0 65 65 65 1 2 3 4 5 5 0 1 0 175 65 86.6 86.6 86.6 86.6 86.6 720 720 720 720 (1).Internal wiring diagram: (2).technical parameter: kvar TAP MFD(uf) VOLTS(V) FREQ(Hz) AMPS(A) Total Weight 2021.5.21 Hangzhou TianHe Power capacitor limited company Outline drawing of capacitor Date