Here are my thoughts on the importance of safety and knowledge about electrical installation and maintenance: Safety should always be the top priority when working with electrical systems and equipment. Electricity can be dangerous if not handled properly. Electricians need to have thorough knowledge of electrical codes and safety procedures to avoid accidents that could cause injury. They must also use personal protective equipment like insulating gloves and boots to protect themselves from electrical shocks. It is also crucial for electricians to have strong technical knowledge about how electrical systems work. They need to understand circuitry, wiring methods, and how to install and repair different electrical components. Having the right skills and understanding of electrical principles helps electricians do their jobs efficiently while avoiding mistakes that could create fire or

1. MARICEL ABALOS
VALERAS
BTVTED-FSM, 3rd
Year
Electrical Tools and
Maintenance (Tools &
Equipment)
CEGUERA TECHNOLOGICAL COLLEGES
Highway 1, Francia Iriga City

4. WARM-UP ACTIVITY:
Direction: You are going to find 5 words in
the following word search. The clues for the
word search are on the right side. Write
your answer on your answer sheet/paper.

5. E P E C 0 R D C
P M D G O B E Z
H P L I E R S B
O S S L W Y F G
U A J I C M V H
G B D K X S W C
H F F S M Q T T
O U T L E T N I
W S M X D M P W
R E P Y Q S Z S

6. CORRECT ANSWER:
• Pliers
• Outlet
• Cord
• Switch
• Fuse

7. LEARNING OBJECTIVES
At the end of the lesson, the students must be able
to:
• Define Electrical Installation and maintenance
• Identify the uses of tools and equipment in
electrical installation and maintenance , and
• Appreciate the importance of safety and
knowledge about Electrical Installation and
Maintenance

8. What is Electrical Installation and Maintenance?
It is the process of installing
and maintaining electrical
systems and equipment. It may
include tasks such as installing
wiring, repairing or replacing
damaged equipment, and
inspecting electrical systems for
safety.

9. Electricians need specialist tools to do their
job effectively and safely, so their toolbox should
include a range of heavy-duty, insulated hand
tools and high-tech tools they can use wherever
their work takes them.
Here are some of the tools used in electrical
installation and maintenance:

10. 1. Pliers- often referred to as cutting pliers or
lineman’s pliers — are a staple on any electrician’s
tool belt. They are mainly used for cutting wire, or
gripping, twisting, bending, or straightening wires.

11. 2. Electrical fuse- is a safety device that operates to
provide protection against the overflow of current
in an electrical circuit. An important component of
an electrical fuse is a metal wire or strip that melts
when excess current flows through it.

12. 3. Switch- is an electrical component that can
disconnect or connect the conducting path in an
electrical circuit, interrupting the electric current
or diverting it from one conductor to another.

13. 4. Electrical outlet- receptacle providing a place in
a wiring system where current can be taken to run
electrical devices. synonyms: electric outlet,
electric receptacle, outlet, wall plug, wall socket.
types: point, power point.

14. 5. Electrical Cord- it temporarily connects an
appliance to the mains electricity supply via a wall
socket or extension cord.

15. 6. Screwdrivers- these are tool made of steel
hardened and tempered at the tip used to loosen
or tighten screws with slotted heads.

16. 7. Hammers-used for driving or pounding and
pulling out of nails.

17. 8. Electrical tape- is an economical general
purpose insulating tape that has excellent
resistance to moisture, abrasion and corrosion. It is
used to insulate electrical wires, insulate other
material that conduct electricity and make minor
repairs to damaged wires.

18. 9. Wire stripper is a small hand-held tool that is
used to remove the insulation from electric wires.
These portable hand-held tools are extremely
popular among electricians and even DIYers for
removing the insulation in order to replace or repair
the wire.

19. 10. Voltage testers - measure AC/DC voltage and
continuity. They are a critical piece of equipment
for testing connections and shorts in cables. Most
voltage and continuity testers have an LED
indicator and also sound an audible tone.

21. What is electrical
installation and
maintenance?
It is the process of installing and maintaining
electrical systems and equipment.

22. What is the use of
pliers?
It is used for cutting wire, or gripping, twisting,
bending, or straightening wires.

23. It is a tool made of steel
hardened and tempered
at the tip used to loosen
or tighten screws with
slotted heads.?
Screwdriver

24. What are the tools and
equipment used in
electrical installation and
maintenance?
Pliers, Screwdriver, Voltage tester, Wire
Stripper, Hammer, Electrical Cord, Fuse, Switch,
Outlet, electrical tape

27. Direction: Write at least 5 example of tools and
equipment use in electrical installation and
maintenance, and write their specific uses.
1.
2.
3.
4.
5.

29. Direction: Arrange the letters to find the correct
word. Write your answer on your paper.
1. DOCR
2. TCHISW
3. REWI RRTSIPPE
4. EUFS
5. TRIELECCAL PTAE
6. MMAREH
7. EIRSPL
8. WERSCVEIDRR
9. ATGEVLO RESTET
10. LETTOU

31. Direction: Read the statement carefully and
identify what is being described or defined.
Choose your answer from the words inside the
box.
Screwdriver Voltage Tester
Pliers Outlet
Fuse Switch
Cord Electrical Tape
Wire Stripper Electrical installation and
Maintenance

32. 1. ___________ is an economical general
purpose insulating tape that has excellent
resistance to moisture, abrasion and
corrosion.
2. ___________ It is the process of installing
and maintaining electrical systems and
equipment.
3. ___________measure AC/DC voltage and
continuity. They are a critical piece of
equipment for testing connections and shorts
in cables.

33. 4. _________is a small hand-held tool that is used
to remove the insulation from electric wires.
5. _________ it temporarily connects an appliance
to the mains electricity supply via a wall socket or
extension cord.
6. __________ often referred to as cutting pliers
or lineman’s pliers — are a staple on any
electrician’s tool belt.
7. _________ receptacle providing a place in a
wiring system where current can be taken to run
electrical devices.

34. 8.___________ these are tool made of steel
hardened and tempered at the tip used to loosen or
tighten screws with slotted heads.
9.__________ is a safety device that operates to
provide protection against the overflow of current
in an electrical circuit.
10.__________ is an electrical component that can
disconnect or connect the conducting path in an
electrical circuit, interrupting the electric current or
diverting it from one conductor to another.

35. List down your thought about the importance
of safety and knowledge about electrical
Installation and Maintenance. Atleast one to
two paragraph.