ELE2303 Assign 1 Page | 1
ELE2303 Embedded Systems Design
Assignment 1 – Gas Monitor Unit Stage 1
Description Marks out of Wtg (%) Due date
Gas Monitor Unit – Stage 1 200 20 28/04/14
Purpose
This assessment is intended to evaluate the student’s capability in selecting and configuring a
microcontroller unit (MCU), designing simple interface hardware and writing subroutines to
operate those interfaces.
Please note – the purpose of studying a ‘design’ course like this, is that you learn how to design
hardware and write programs to solve new problems. This requires you to understand the how
individual parts of the microcontroller function and how to control them with a program. You are
expected to link together pieces of interface circuitry and combine segments of program you
learn about in the course materials, into a structured solution. Do not expect to find a ‘solution’
to this problem on the internet. Expect that you have to create it!
Grading of this assessment
This task will be assessed against the course objectives 1, 2, 3, 4, 6 and 7. This assessment will
be graded (F, C, B, A, HD) using a rubric marking scheme against criteria such as: the
appropriate selection and use of microcomputer hardware; the design of I/O hardware to meet a
specification; implementation of software to meet a specification; quality of documentation
including organisation of ideas and format; spelling, grammar and punctuation. Note - this
course is a communications benchmark course, hence marks will be awarded for the quality of
documentation.
Assignment Requirements
This assessment requires students to meet the requirements the specification below. Select a
suitable microcontroller from the PIC18 family, design simple interface hardware, write
and test some C programs (subroutines) to operate the hardware interface and then document
the hardware and software as a proposed design. Software is to be written in C using the
MPLAB X IDE. You must create an MPLAB X project which may include one or more C
source files. The testing is to be completed using either: the Oshonsoft PIC18 simulator or the
MPLAB X simulator.
There is NO requirement to assemble any hardware, or layout a PCB for this assignment.
The circuit design for the hardware may be drawn using electronics CAD software, OR hand-
drawn and scanned, for inclusion in the documentation. The ‘hardware’ can be successfully
configured and simulated on the Oshonsoft PIC18 simulator or the MPLAB simulator. A few
screen captures of the software under-going testing are to be included in the documentation.
ELE2303 Assign 1 Page | 2
Each student is required to submit:
1. A report in PDF format which includes:
a brief introduction (100 – 150 words) outlining the design requirements based on the
specification.
the hardware design (250 – 300 words) explaining the key elements of the design and
how they meet the specification, plus ...
A prototype based on SCADA system was developed as a result of the final project of the discipline entitled Applied Microcontrollers to Control and Automation Engineering. This course has project based learning (PBL) methodology. he prototype has a drive unit and a computer program. This evice was developed using a PIC18F4550 microcontroller and various electronic components: resistors, capacitors, LEDs, among others. The computer program was developed using programming language C Sharp (C #) in Visual Studio development environment. The interface between the program and the device is performed via USB communication. This prototype is now used in the discipline mentioned in order to teach practical lessons about embedded systems projects, USB communication, data acquisition and supervisory systems. As all stages of the project were presented to the students in a very detailed way and its development was performed on a real application, the students showed a lot of interest about this tool during the last school year.
A prototype based on SCADA system was developed as a result of the final project of the discipline entitled Applied Microcontrollers to Control and Automation Engineering. This course has project based learning (PBL) methodology. he prototype has a drive unit and a computer program. This evice was developed using a PIC18F4550 microcontroller and various electronic components: resistors, capacitors, LEDs, among others. The computer program was developed using programming language C Sharp (C #) in Visual Studio development environment. The interface between the program and the device is performed via USB communication. This prototype is now used in the discipline mentioned in order to teach practical lessons about embedded systems projects, USB communication, data acquisition and supervisory systems. As all stages of the project were presented to the students in a very detailed way and its development was performed on a real application, the students showed a lot of interest about this tool during the last school year.
Summary Create an Object-Oriented program that creates a simulator an.pdfallwinsupport
Summary Create an Object-Oriented program that creates a simulator and that allows the user to
place sensor(s) across Sheridan's building(s) to monitor the different levels of CO2. In addition,
practice program flow control statements to branch and repeat statements as needed. Moreover,
divide the business logic appropriately between classes and create methods as needed.
Application Description Write a program based on the Object Oriented (OO) paradigm that
displays the sensors'/sensor's data/information for each Sheridan's building. This information (or
data) includes the sensor's 2D position, the different CO2 levels in PPM, and the average
reading(s) for one or more readings. The application will ask for the following: 1) the number of
buildings that needs to be monitored in terms of the CO2 levels in PPM, 2) the building name (at
least one building), and 3) the number of sensors deployed for each building. Afterwards, the
program will ask the following for each building: 1) the number of days that are monitored, and
2) the CO2 reading(s) (PPM) for each day. Detailed Requirements: Initialization: For each class,
define all required field variables (or attributes) and methods. Define and implement the required
accessor and mutator methods. Ensure you detect and correct syntax errors early. Commit
changes often to demonstrate that you followed stepwise refinements process.
Part I Business Iogic (each class is saved in a separate fille as a module): assignment, label the
relationships with their name: USES, HAS-A and IS-A. Take a screenshot of the diagram and
paste it on a document called UML Student Name. Application Class (main class): Part III: Error
Handling, Using standard error checking (if-else) to ensure the input is vulid - Define a start(..)
method that runs the Sheridan System. both in terms of range and type of data entered. This
includes the number of buildings, number SheridanSystem Class: of sensors, buildings" names,
the number of days and the number of CO2 readings. Moreover, the building names do not any
numerical values. The application should not crash at any point - Define noOfBuild attribute. due
to data input i processing. If the recovery from error(s) is not possible, then at least inform -
Define the method run(...) that creates a number of buildings. the user about the error(s) and
terminate the application. A sample of outputs are placed at the - Upon the creation of buildings,
create one or more sensors via the createSensors(...) end of this document to clarify those cases.
method. This method is a member of the Building class below. Part IV; Program Development
Process, The project is to be developed iteratively in small Building Class: increments. Code
must be version controlled using GlI using BitBucket. Each milestone must - Define
noOfSensors, listOfSensors, and buildName attributes. have at a minimum one commit at the end
of the milestone. For best evaluation, ensure changes - Define the method createSensors(.
Due to extensive use of motion control system in industry, there has been growing research on proportional-integral-derivative (PID) controllers. DC motors are widely used various areas of industrial applications. The aim of this paper is to implement efficient method for controlling speed of DC motor using a PID controller based. Proposed system is implemented using arduino microcontroller and PID controller. Motor speed is controlled through PID based revolutions per minute of the motor. This encoder data will be send through microcontroller to Personal Computer with PID controller implemented in MATLAB. Results shows that PID controllers used provide efficient controlling of DC motor.
IMPLEMENTATION OF USER INTERFACE FOR MICROPROCESSOR TRAINER cscpconf
This paper aims to design and construct the microcontroller - based userinterface system and to
study input, computation and output for microprocessor trainer.The other two activities beyond
computation :input and output or I/O.This paper also aims to do high quality research in the
area of filesystems, as well as develop a good implementation on atleast one computersystem. A
computersystem's I/O performance must be commensurate (equal) with its CPU performance if
the I/O system is not to limit the system's total throughput.When hundreds to thousands of such
highperformance micro-processors are closely connected inscalablearray architecture, the
enormous CPU performance of the multi-computer requires an I/O system with correspondingly
high performance.A wellbalanced computer requires I/O performance commensurate with its
CPU performance. High performance computers, access large numbers of disks in parallel to
achieve the very appreciable I/O performance.
Anorexia1-Definition2-Epidemiology in united states2.docxjack60216
Anorexia
1-Definition
2-Epidemiology in united states
2-Symptoms and signs
3-Diagnosis Criteria
4-Differential diagnosis
5-Treatment
6-Criteria for hospitalization
7-Other diseases related with inadequate calories intake
8-Underweight and growth failure definition
At least 15 slides. APA format.turtinitin report
.
Annotated BibliographyIn preparation of next weeks final as.docxjack60216
Annotated Bibliography
In preparation of next week's final assignment, prepare an annotated bibliography of all resources (required and those you selected) used to date (minimum of 26) at this time.
esources
Required References
Click url to play videos
Beautiful Mind. (2005, October 11). Wal-Mart: The high cost of low price [Video file]. New York, NY: Retail Project L.L.C. Retrieved from
Walmart The High Cost Of Low Price (Links to an external site.)
Fadi-BNZE-HD. (2014, March 14). Full documentary no logo brands, globalization and resistance [Video file]. Retrieved from
No Logo Brands, Globalization and Resistance (Links to an external site.)
*Study guide, http://www.mediaed.org/assets/products/115/studyguide_115.pdf
Ford School. (2011, March 11). @fordschool - Paul Krugman: Reflections on Globalization: Yesteryear and today[Video file]. Retrieved from
[email protected]
- Paul Krugman: Reflections on Globalization: Yesteryear and Today (Links to an external site.)
PBS Newshour. (2014, August 20).
‘Factory Man’ explores human side of how globalization affects U.S. industry
[Video file]. Retrieved from
http://www.pbs.org/newshour/bb/factory-man-explores-human-side-globalization-affects-u-s-industry/ (Links to an external site.)
Walmart. (n.d.). Community giving. http://foundation.walmart.com/
Recommended References
International Monetary Fund. (n.d.).
Key issues: Globalization
. Retrieved from http://www.imf.org/external/np/exr/key/global.htm
World Affairs Council: Nor Cal. (2006, October 6).
Making globalization work Joseph Stiglitz
[Video file]. Retrieved from
http://library.fora.tv/2006/10/10/Making_Globalization_Work (Links to an external site.)
Online Writing Lab (n.d.).
Annotated bibliography samples
. Retrieved from https://owl.english.purdue.edu/owl/resource/614/03/
esources
Required References
Click url to play videos
Beautiful Mind. (2005, October 11). Wal-Mart: The high cost of low price [Video file]. New York, NY: Retail Project L.L.C. Retrieved from
Walmart The High Cost Of Low Price (Links to an external site.)
Fadi-BNZE-HD. (2014, March 14). Full documentary no logo brands, globalization and resistance [Video file]. Retrieved from
No Logo Brands, Globalization and Resistance (Links to an external site.)
*Study guide, http://www.mediaed.org/assets/products/115/studyguide_115.pdf
Ford School. (2011, March 11). @fordschool - Paul Krugman: Reflections on Globalization: Yesteryear and today[Video file]. Retrieved from
[email protected]
- Paul Krugman: Reflections on Globalization: Yesteryear and Today (Links to an external site.)
PBS Newshour. (2014, August 20).
‘Factory Man’ explores human side of how globalization affects U.S. industry
[Video file]. Retrieved from
http://www.pbs.org/newshour/bb/factory-man-explores-human-side-globalization-affects-u-s-industry/ (Links to an external site.)
Walmart. (n.d.). Community giving. http://foundation.walmart.com/
Recommended References
Internation.
More Related Content
Similar to ELE2303 Assign 1 Page 1 ELE2303 Embedded Systems Design.docx
Summary Create an Object-Oriented program that creates a simulator an.pdfallwinsupport
Summary Create an Object-Oriented program that creates a simulator and that allows the user to
place sensor(s) across Sheridan's building(s) to monitor the different levels of CO2. In addition,
practice program flow control statements to branch and repeat statements as needed. Moreover,
divide the business logic appropriately between classes and create methods as needed.
Application Description Write a program based on the Object Oriented (OO) paradigm that
displays the sensors'/sensor's data/information for each Sheridan's building. This information (or
data) includes the sensor's 2D position, the different CO2 levels in PPM, and the average
reading(s) for one or more readings. The application will ask for the following: 1) the number of
buildings that needs to be monitored in terms of the CO2 levels in PPM, 2) the building name (at
least one building), and 3) the number of sensors deployed for each building. Afterwards, the
program will ask the following for each building: 1) the number of days that are monitored, and
2) the CO2 reading(s) (PPM) for each day. Detailed Requirements: Initialization: For each class,
define all required field variables (or attributes) and methods. Define and implement the required
accessor and mutator methods. Ensure you detect and correct syntax errors early. Commit
changes often to demonstrate that you followed stepwise refinements process.
Part I Business Iogic (each class is saved in a separate fille as a module): assignment, label the
relationships with their name: USES, HAS-A and IS-A. Take a screenshot of the diagram and
paste it on a document called UML Student Name. Application Class (main class): Part III: Error
Handling, Using standard error checking (if-else) to ensure the input is vulid - Define a start(..)
method that runs the Sheridan System. both in terms of range and type of data entered. This
includes the number of buildings, number SheridanSystem Class: of sensors, buildings" names,
the number of days and the number of CO2 readings. Moreover, the building names do not any
numerical values. The application should not crash at any point - Define noOfBuild attribute. due
to data input i processing. If the recovery from error(s) is not possible, then at least inform -
Define the method run(...) that creates a number of buildings. the user about the error(s) and
terminate the application. A sample of outputs are placed at the - Upon the creation of buildings,
create one or more sensors via the createSensors(...) end of this document to clarify those cases.
method. This method is a member of the Building class below. Part IV; Program Development
Process, The project is to be developed iteratively in small Building Class: increments. Code
must be version controlled using GlI using BitBucket. Each milestone must - Define
noOfSensors, listOfSensors, and buildName attributes. have at a minimum one commit at the end
of the milestone. For best evaluation, ensure changes - Define the method createSensors(.
Due to extensive use of motion control system in industry, there has been growing research on proportional-integral-derivative (PID) controllers. DC motors are widely used various areas of industrial applications. The aim of this paper is to implement efficient method for controlling speed of DC motor using a PID controller based. Proposed system is implemented using arduino microcontroller and PID controller. Motor speed is controlled through PID based revolutions per minute of the motor. This encoder data will be send through microcontroller to Personal Computer with PID controller implemented in MATLAB. Results shows that PID controllers used provide efficient controlling of DC motor.
IMPLEMENTATION OF USER INTERFACE FOR MICROPROCESSOR TRAINER cscpconf
This paper aims to design and construct the microcontroller - based userinterface system and to
study input, computation and output for microprocessor trainer.The other two activities beyond
computation :input and output or I/O.This paper also aims to do high quality research in the
area of filesystems, as well as develop a good implementation on atleast one computersystem. A
computersystem's I/O performance must be commensurate (equal) with its CPU performance if
the I/O system is not to limit the system's total throughput.When hundreds to thousands of such
highperformance micro-processors are closely connected inscalablearray architecture, the
enormous CPU performance of the multi-computer requires an I/O system with correspondingly
high performance.A wellbalanced computer requires I/O performance commensurate with its
CPU performance. High performance computers, access large numbers of disks in parallel to
achieve the very appreciable I/O performance.
Anorexia1-Definition2-Epidemiology in united states2.docxjack60216
Anorexia
1-Definition
2-Epidemiology in united states
2-Symptoms and signs
3-Diagnosis Criteria
4-Differential diagnosis
5-Treatment
6-Criteria for hospitalization
7-Other diseases related with inadequate calories intake
8-Underweight and growth failure definition
At least 15 slides. APA format.turtinitin report
.
Annotated BibliographyIn preparation of next weeks final as.docxjack60216
Annotated Bibliography
In preparation of next week's final assignment, prepare an annotated bibliography of all resources (required and those you selected) used to date (minimum of 26) at this time.
esources
Required References
Click url to play videos
Beautiful Mind. (2005, October 11). Wal-Mart: The high cost of low price [Video file]. New York, NY: Retail Project L.L.C. Retrieved from
Walmart The High Cost Of Low Price (Links to an external site.)
Fadi-BNZE-HD. (2014, March 14). Full documentary no logo brands, globalization and resistance [Video file]. Retrieved from
No Logo Brands, Globalization and Resistance (Links to an external site.)
*Study guide, http://www.mediaed.org/assets/products/115/studyguide_115.pdf
Ford School. (2011, March 11). @fordschool - Paul Krugman: Reflections on Globalization: Yesteryear and today[Video file]. Retrieved from
[email protected]
- Paul Krugman: Reflections on Globalization: Yesteryear and Today (Links to an external site.)
PBS Newshour. (2014, August 20).
‘Factory Man’ explores human side of how globalization affects U.S. industry
[Video file]. Retrieved from
http://www.pbs.org/newshour/bb/factory-man-explores-human-side-globalization-affects-u-s-industry/ (Links to an external site.)
Walmart. (n.d.). Community giving. http://foundation.walmart.com/
Recommended References
International Monetary Fund. (n.d.).
Key issues: Globalization
. Retrieved from http://www.imf.org/external/np/exr/key/global.htm
World Affairs Council: Nor Cal. (2006, October 6).
Making globalization work Joseph Stiglitz
[Video file]. Retrieved from
http://library.fora.tv/2006/10/10/Making_Globalization_Work (Links to an external site.)
Online Writing Lab (n.d.).
Annotated bibliography samples
. Retrieved from https://owl.english.purdue.edu/owl/resource/614/03/
esources
Required References
Click url to play videos
Beautiful Mind. (2005, October 11). Wal-Mart: The high cost of low price [Video file]. New York, NY: Retail Project L.L.C. Retrieved from
Walmart The High Cost Of Low Price (Links to an external site.)
Fadi-BNZE-HD. (2014, March 14). Full documentary no logo brands, globalization and resistance [Video file]. Retrieved from
No Logo Brands, Globalization and Resistance (Links to an external site.)
*Study guide, http://www.mediaed.org/assets/products/115/studyguide_115.pdf
Ford School. (2011, March 11). @fordschool - Paul Krugman: Reflections on Globalization: Yesteryear and today[Video file]. Retrieved from
[email protected]
- Paul Krugman: Reflections on Globalization: Yesteryear and Today (Links to an external site.)
PBS Newshour. (2014, August 20).
‘Factory Man’ explores human side of how globalization affects U.S. industry
[Video file]. Retrieved from
http://www.pbs.org/newshour/bb/factory-man-explores-human-side-globalization-affects-u-s-industry/ (Links to an external site.)
Walmart. (n.d.). Community giving. http://foundation.walmart.com/
Recommended References
Internation.
Annual Report to the Nation on the Status of Cancer,Part I .docxjack60216
Annual Report to the Nation on the Status of Cancer,
Part I: National Cancer Statistics
Kathleen A. Cronin, PhD, MPH1; Andrew J. Lake, BS2; Susan Scott, MPH 1; Recinda L. Sherman, MPH, PhD, CTR3;
Anne-Michelle Noone, MS1; Nadia Howlader, MS, PhD1; S. Jane Henley, MSPH4; Robert N. Anderson, PhD5;
Albert U. Firth, BS2; Jiemin Ma, PhD, MHS6; Betsy A. Kohler, MPH, CTR3; and Ahmedin Jemal, DVM, PhD 6
BACKGROUND: The American Cancer Society (ACS), the Centers for Disease Control and Prevention (CDC), the National Cancer
Institute (NCI), and the North American Association of Central Cancer Registries (NAACCR) collaborate to provide annual updates
on cancer occurrence and trends in the United States. METHODS: Incidence data were obtained from the CDC-funded and NCI-
funded population-based cancer registry programs and compiled by NAACCR. Data on cancer deaths were obtained from the
National Center for Health Statistics National Vital Statistics System. Trends in age-standardized incidence and death rates for all can-
cers combined and for the leading cancer types by sex, race, and ethnicity were estimated by joinpoint analysis and expressed as the
annual percent change. Stage distribution and 5-year survival by stage at diagnosis were calculated for breast cancer, colon and rec-
tum (colorectal) cancer, lung and bronchus cancer, and melanoma of the skin. RESULTS: Overall cancer incidence rates from 2008 to
2014 decreased by 2.2% per year among men but were stable among women. Overall cancer death rates from 1999 to 2015
decreased by 1.8% per year among men and by 1.4% per year among women. Among men, incidence rates during the most recent 5-
year period (2010-2014) decreased for 7 of the 17 most common cancer types, and death rates (2011-2015) decreased for 11 of the 18
most common types. Among women, incidence rates declined for 7 of the 18 most common cancers, and death rates declined for 14
of the 20 most common cancers. Death rates decreased for cancer sites, including lung and bronchus (men and women), colorectal
(men and women), female breast, and prostate. Death rates increased for cancers of the liver (men and women); pancreas (men and
women); brain and other nervous system (men and women); oral cavity and pharynx (men only); soft tissue, including heart (men
only); nonmelanoma skin (men only); and uterus. Incidence and death rates were higher among men than among women for all racial
and ethnic groups. For all cancer sites combined, black men and white women had the highest incidence rates compared with other
racial groups, and black men and black women had the highest death rates compared with other racial groups. Non-Hispanic men
and women had higher incidence and mortality rates than those of Hispanic ethnicity. Five-year survival for cases diagnosed from
2007 through 2013 ranged from 100% (stage I) to 26.5% (stage IV) for female breast cancer, from 88.1% (stage I) to 12.6% (stage IV)
for colorectal cancer, from 55.
Annotated BibliographyDue 1212019 @ 12pm Eastern Time (Unite.docxjack60216
Annotated Bibliography
Due 12/1/2019 @ 12pm Eastern Time (United States)
3-5 pages
Must be in APA format
Must use a minimum of 8
scholarly article
Must be submitted through turnitin and submit the report
Instructions are attached
.
Annotated BibliographyFor this assignment, you will create an .docxjack60216
Annotated Bibliography
For this assignment, you will create an annotated bibliography on social determinants.
- Select five articles you wish to annotate. Make certain to select different types of disparities, such as race, gender, SES, age, language, liability status, etc.
For more information about the elements of an
Annotated Bibliography
.
Attached, you will find a document that can provide more in-depth information on how to construct an annotated bibliography, including samples.
FREE OF PLAGIARISM (TURNITIN ASSIGNMENT)
.
Annotated bibliography due in 36 hours. MLA format Must incl.docxjack60216
Annotated bibliography due in 36 hours.
MLA format
Must include 8 sources
Annotations should be between 4 to 7 sentences.
PLEASE PLEASE PLEASE review ALL attachments because they are very important and are beneficial for the next part (research paper).
The book is Things Fall Apart by Chinua Achebe.
I also included an attachment for the research paper so you can know what to focus on for the annotated bib.
.
Analyzing a Short Story- The Necklace by Guy de MaupassantIntro.docxjack60216
Analyzing a Short Story- The Necklace by Guy de Maupassant
Intro
- 5 to 8 line and thesis = what you think is the major theme of the story at end of the intro just a one sentence.
Plot
- What is the plot? (2-3 lines summary)
Understandable or too complex?
Tension/conflict?
Too fast/slow? Appropriate?
Characters
- Indentify major character(s)
Descriptions of major characters; must have at least one physical description and one personality description for each major character
Stereotypes and break in stereotypes of major characters
Setting
- Geographical (city/state/country)
Time period (year/time of year/day/time of day)Specific (house/village, etc)
Cultural (any prevailing social/ political /religious conditions that affect/ influence the story )
Narrator
- Is it internal (one of the characters in the story)Or is it external (someone outside the story)Which do you prefer and why?
Images/Symbols- Images or symbols used (must have at least one human and one non-human) Must explain what each one symbolizes.
Theme/Message-
What is the main message of the story? Explain how you arrived at your answer.
Conclusion (1 Para, exactly 10 lines)
Length: 4 pages
(not counting Works Cited)
Length starts with first word of intro para (NOT top of first page)
Make sure on each full page you have 23 lines total; otherwise, you will have to make up those lines on the last page to meet the minimum length requirement.
must be original writing and no plagiarism and cannot use any other website then the short story that is provided.
sample of essay example provided below.
.
Andy Sylvan was the assistant director of the community developm.docxjack60216
Andy Sylvan was the assistant director of the community development department of the city of Greenwood. Greenwood was an outer suburb of the capital city, and while most of its citizens were affluent, it did have a pocket of residential poverty near a riverbank across from an urban industrial complex. Sylvan was active in writing grant proposals for both federal and state funding of a redevelopment project. One of his state grant applications was successful, and the state government awarded a block grant of $3 million for renovation of the area. The renovation money would permit the community development department to purchase land and build a park near the area’s elementary school, to pave several streets, and to improve the storm drainage system. Money would also be available to bring plumbing systems in several homes up to code standards. Sylvan’s boss, Rose Almindinger, was a political appointee who was well connected to leaders of the local Republican Party.
While she had had administrative experience with a construction firm, she had never been in charge of financial affairs in any sense beyond balancing her personal checkbook. One has to seriously question if she did that very well. What she seemed not to understand was that the moneys that came from state grants were not to be mixed with her private bank accounts. Almindinger was sort of like George Washington Plunkitt
1
in that she believed in honest graft, that is, when she saw her opportunity, she took it. The grant and its block structure sure looked like an opportunity. After all, just what is community development? Almindinger saw a chance to arrange bids for street construction so that her former company could win the business at a higher price than others would charge. A glaring loophole in the grant system seemed to suggest that she could award contracts without going through the city’s purchasing and bidding systems. She also found leeway to attend a conference on park development in Hawaii on the state’s dollar. A friend of hers ran a travel agency and she was more than anxious to help Rose. In fact, she told Almindinger that she could bill her for travel expenses for both her and her husband in a way that it would appear that all airline costs were for one person. The two enjoyed 7 days on Maui, all expenses paid by the city, while Mrs. Rose Almindinger made brief appearances at the 2-day conference. Almindinger also hired four political friends for temporary jobs on grant projects, paying them $40 an hour. No one managed the four, and only Almindinger received reports of their work. Their employment cost the grant $30,000 in just 2 months.
While there was evidence of some improvements being made in the grant project neighborhood, rumors of waste, fraud, and abuse started to circulate. One of Almindinger’s appointees had a penchant to be verbally abusive to certain assistants in the department office, and the assistants had contacted the city personnel director. Sylvan.
Annotated Bibliography Althaus, F. U.S. Maternal Morta.docxjack60216
Annotated Bibliography
Althaus, F. “U.S. Maternal Mortality Has Continued Its Decline, but Risk Remains Higher
among Minority Women.” Family Planning Perspective, vol. 23, no. 3, May 1991, pp.
140–141. EBSCOhost, doi: 10.2307/2135829.
According to the article by F. Althaus, the development in the American health system
has continuously transformed the health sector and the delivery environment among expectant
mothers. When compared to the previous era, expectant White-American mothers are delivering
safely, specifically those who live in states where the quality of health infrastructure and services
are high. Unfortunately, though, the population of people of color’s maternal mortality rate is
increasingly reporting the highest in minority communities due to the low quality of health
infrastructure and services in their living environments. Althaus presents that both maternal and
child mortality rates among Black mothers are three times that of Whites. This author stretches
the discussion to address the long history of birth oppression among Black mothers and the
strategies that have been applied to suppress these oppressions. The author outlines that the
Black, marginalized, population contributes significantly to the American ecosystem. Therefore,
providing quality service, especially for the expectant mothers of color, should be something the
federal government sees as a must do instead of coming up with illegal family planning
approaches with a hidden agendas. It is imperative that equity prevails for all races during
maternity and childbirth.
El Sayed, Abdulrahman M., et al.: Social Environment, Genetics, and Black-White
Disparities in Infant Mortality."Paediatric & Perinatal Epidemiology, Vol.29. no.6.
November.2015.pp.546-551.EBSCOhost.doi:10.1111/ppe.12227
The above article presents information on genetics and one’s surroundings as the factors
that interplay and produce the wellness of the population within a given place. The article
discusses parental race differences and vulnerabilities of infant mortality rates through studying
how genes and a person’s environment could shape these perinatal vulnerabilities. El Sayed
found that the dynamic of child deaths continue to increase among the black community with
said improvement in the health sector impacting only the white population. Instead of genetics
being the main impact on child deaths, it is shown that race-driven prejudice and structural
socio-economic opportunities of social surroundings is a great explanation of why there are
racial differences in infant mortality rates. Despite these factors being proven to be contributing
to the number of deaths among infants, the government does little to address the associated risk
factors. The author recommends that the federal government could mitigate the social factors and
introduce more diverse healthcare providers to promote wellness among Black-American
expectant mothers.
.
Ann, a community nurse, made an afternoon home visit with Susan and .docxjack60216
Ann, a community nurse, made an afternoon home visit with Susan and her father. After the death of her mother, Susan had growing concerns about her father living alone. "I worry about my father all the time. He is becoming more forgetful and he has trouble seeing. Mom used to take care of him. I am not sleeping and I am irritable around him. Yesterday I shouted at him because he wouldn't let me help him with his laundry. I felt terrible! I am at my wits' end! My brothers and sisters do not want to put dad in a nursing home but they are not willing to help out. As usual, they have left me with all the responsibility. I work part time and have two small children to care for.” Susan's father, Sam, sat quietly with tears filling his eyes. He was well nourished and well-groomed but would not make eye contact. Nurse Ann noticed that the house was clean and orderly. A tray in front of the TV had the remains of a ham sandwich and glass of ice tea. Mail was piled up, unopened on a small table near the front door. There was only one car in the driveway and the yard was in need of attention.
.
Andrea Walters Week 2 Main Post The key functional area of n.docxjack60216
Andrea Walters' Week 2 Main Post: The key functional area of nursing informatics relevant to me is education and consultant. Education is relevant as newly hired nurses need education to be competent with the electronic health records (EHR) used in the specialty. I precept nurses new to oncology and educate them on how informatics is used in oncology, how data is placed into the EHRs and how then used by informaticists. Consultant is relevant when there has been an issue, I have been used as a consultant and a liaison between nursing science and computer science. I have given my knowledge to the EHR developers on how they may better serve other oncology practices. Although I have been used as a consultant, oncology is constantly changing. Technology informatics guiding education reform (TIGER) has core competencies for specific areas. One core competency area under direct patient care is enhance information and knowledge management (Hubner et al., 2018). This competency will aid me to become more proficient in oncology and using a database by engaging in researching upcoming and new evidence-based practice. This competency is necessary to help identify problems and become part of the solution instead of waiting on the organization to develop solutions. The plan for developing this competency is to subscribe to an oncology journal, such as The Oncology Nurse to further my education outside of work, and research evidence-based practice through the organization’s research database, CINHAL. I will set aside 30 minutes twice weekly to research and read to develop this competency. Developing this competency will help refine and improve my skills and move from being a good to an expert nurse consultant and educator. Continuing education concentrating on informatics is necessary for all nurses in order to productively participate with content and dialogue that correlates to the informatics realm as nursing informatics is a rapidly changing field (Yen, Kennedy, Phillips & Collin, 2017). References Hubner, U., Shaw, T., Thye, J., Egbert, N., Marin, H., Chang, P., ... Ball, M. (2018). Technology informatics guiding education -TIGER. Methods of Information in Medicine, 57(S 01), e30-342. doi: 10.3414/ME17-01-0155 Yen, P., Kennedy, M., Phillips, A., & Collins, S. (2017). Nursing informatics competency assessment for the nurse leader. The Journal of Nursing Administration, 47(5), 271-277. doi: 10.1097/NNA.0000000000000478
.
and emergency CPR all changed ways of thinking about risk of death.docxjack60216
and emergency CPR all changed ways of thinking about risk of death, so too did the idea of organs moving among family members, friends, or even strangers open up social and familial obligations to being expressed via emerging medical-technical means.” (p. 166)
Using this quote as a point of entry, write about 2-3 pages (double-spaced) about how the practice of medicine in the US has “opened up” new ways of living in a world imbued with social, cultural and political meanings and values. You can use any examples and materials you want (either covered in class or not). Make sure you quote your sources.
Choose a picture that best illustrates for you the social and/or cultural and/or political significance of the Covid-19 public health crisis. It can be a picture taken by you or found somewhere else (mention the sources either way). Write a mini-essay of about 200 words, explaining why that particular image captures, in your opinion, something important about the pandemic. Give a title to your mini-essay. Be as creative as you would like. Upload the picture and the text in one document.
BOTH prompts are mandatory. Upload them on BlueLine by November 24 at 5 pm.
.
analyze, and discuss emerging ICT tools and technologies present.docxjack60216
analyze, and discuss emerging ICT tools and technologies presenting the potential to enhance policy making. Visualization tool are discussed in
Visualization tools help users better understand data and provide a more meaningful view in context, especially by presenting data in a graphical form.
Produce a definition of data visualization. Explain how it caters to the perceptual abilities of humans.
Describe three challenges data visualization researchers face when trying to use visualization tools to reinforce the policy-making process. Suggest solutions to conquer these three challenges.
Initial Post:
Create a new thread. As indicated above, (1) Produce a definition of data visualization. Explain how it caters to the perceptual abilities of humans. (2) Describe three challenges data visualization researchers face when trying to use visualization tools to reinforce the policy-making process. Suggest solutions to conquer these three challenges.
In order to receive full credit for the initial discussion post, you must include at least two citations (APA) from academic resources
.
Analyzing a Research ArticleNote Please complete this dis.docxjack60216
Analyzing a Research Article
Note
: Please complete this discussion before completing the assignment in this unit.
For this discussion, select one of the peer-reviewed
In your initial post:
Cite the article and provide your own analysis of it. Use the general outline for analyzing a research article from the Analyze Results page (link given in the resources).
State why this specific article is important to your course project.
Post according to the Faculty Expectations Response Guidelines. Be sure to include at least one APA-formatted citation (in-text plus full reference). The citation should be from materials you have read during this unit. It may be from course textbooks, assigned readings, or an outside source.
Overprescribing antiobics
References
Brink, A. J., Messina, A. P., Feldman, C., Richards, G. A., Becker, P. J., Goff, D. A., ... & Alliance, N. A. S. S. (2016). Antimicrobial stewardship across 47 South African hospitals: an implementation study.
The Lancet Infectious Diseases
,
16
(9), 1017-1025.
Dobson, E. L., Klepser, M. E., Pogue, J. M., Labreche, M. J., Adams, A. J., Gauthier, T. P., ... & Task, S. C. P. A. S. (2017). Outpatient antibiotic stewardship: Interventions and opportunities.
Journal of the American Pharmacists Association
,
57
(4), 464-473.
.
Analyze the Civil Rights Movement of the 1950s and 1960s. What p.docxjack60216
Analyze the Civil Rights Movement of the 1950s and 1960s. What progress did the movement make in the U.S. Supreme Court? How did southern segregationists react to the Court’s decisions? Who was Emmett Till, and what happened to him? Explain the Montgomery Bus Boycott and its impact. What style of protest did Martin Luther King, Jr. (MLK) and civil rights activists practice? How did college students become engaged in the movement? Who were the Freedom Riders? How did Civil Rights activists advocate for voting rights and address social and economic inequities in the United States? What is the legacy of the Civil Rights Movement?
.
Analytical Research Project InstructionsINFA 630 – Intrusion.docxjack60216
Analytical Research Project Instructions
INFA 630 – Intrusion Detection and Intrusion Prevention
Summary
This is a paper describing the results of an analytical research project, worth 25% of your total grade. Your paper should be 10-12 pages, double-spaced, exclusive of cover, title page, table of contents, endnotes and bibliography. Your paper must use APA formatting with the exception that tables and figures can be inserted at the appropriate location rather than added at the end. Following UMUC policy, all students must upload their papers to Turnitin.com (following instructions provided by your instructor), produce and review an originality report, and submit the final version of the paper to your Assignment Folder prior to the submission deadline.
Paper Topic Selection
Prior to writing your paper, you must submit a short, ungraded, topic proposal. You should submit your intended research paper topic by the end of Session 3. The purpose of this preliminary milestone is to provide your instructor the opportunity to confirm the appropriateness of your proposed topic, sufficiently early in the course to allow for topic revision if necessary. It will be helpful if you include, with your proposed paper topic, the sort of research you intend to do and any specific sources you may have already found or plan to use in researching your topic. Your instructor will provide feedback on the suitability of the proposed topic by the start of Session 5. Students who do not provide a proposed topic will be preparing their research papers "at risk;"
i.e.
, they will run the risk of delivering a paper reflecting research that is not suitable for this course.
Analytical Research Project
The purpose of the Research Project is to develop an in-depth understanding of the intrusion detection and/or prevention technology and the way in which such technology is used to protect specific computing environments against specific threats. To arrive at this understanding, your project may choose to follow either one of two analytical approaches:
1. Analysis of a tool or technique including functional applicability and limitations
2. Analysis of environmental security requirements and technologies to meet those requirements
Tool-centric Research
: Projects of the first type will focus on a specific tool, technique, or method used in intrusion detection or intrusion prevention. Choosing a topic for this type of project will mean selecting the tool you want to research and analyze and developing a research question or thesis statement that your research is intended to answer. The analysis for a tool-centric research project should emphasize the use and application of the tool, technique, or method rather than a simple explanation of its features. If you choose a product or tool with a broad set of capabilities, you may choose to provide an analysis of one or more aspects of the tool. The paper distills fundamental issues, focuses on one available solution, a.
Analyze the performance of the leadership of an organization (Netfli.docxjack60216
Analyze the performance of the leadership of an organization (Netflix). The focus of this paper (4-6 pages) will be on the actions taken by the corporate leadership in the face of the global financial crisis since 2007. For the purpose of assurance of learning, one score will be given, based on the articulation of the situation, interaction style, goal-setting process, and leadership behaviour. Figure out exactly what was the reaction to the difficult business environment. Just pick a few things (or even only one and go in detail).
.
Analyze the subjective portion of the note. List additiona.docxjack60216
Analyze the subjective portion of the note. List additional information that should be included in the documentation.
Analyze the objective portion of the note. List additional information that should be included in the documentation.
Is the assessment supported by the subjective and objective information? Why or why not?
What diagnostic tests would be appropriate for this case, and how would the results be used to make a diagnosis?
Would you reject/accept the current diagnosis? Why or why not? Identify three possible conditions that may be considered as a differential diagnosis for this patient. Explain your reasoning using at least three different references from current evidence-based literature.
ABDOMINAL ASSESSMENT NOTE
Subjective:
• CC: “My stomach hurts, I have diarrhea and nothing seems to help.”
• HPI: JR, 47 yo WM, complains of having generalized abdominal pain that started 3 days ago. He has not taken any medications because he did not know what to take. He states the pain is a 5/10 today but has been as much as 9/10 when it first started. He has been able to eat, with some nausea afterwards.
• PMH: HTN, Diabetes, hx of GI bleed 4 years ago
• Medications: Lisinopril 10mg, Amlodipine 5 mg, Metformin 1000mg, Lantus 10 units qhs
• Allergies: NKDA
• FH: No hx of colon cancer, Father hx DMT2, HTN, Mother hx HTN, Hyperlipidemia, GERD
• Social: Denies tobacco use; occasional etoh, married, 3 children (1 girl, 2 boys)
Objective:
• VS: Temp 99.8; BP 160/86; RR 16; P 92; HT 5’10”; WT 248lbs
• Heart: RRR, no murmurs
• Lungs: CTA, chest wall symmetrical
• Skin: Intact without lesions, no urticaria
• Abd: soft, hyperactive bowel sounds, pos pain in the LLQ
• Diagnostics: None
Assessment:
• Left lower quadrant pain
• Gastroenteritis
.
Analyze the measures your state and local community have in pl.docxjack60216
Analyze the measures your state and local community have in place to prepare hospitals for two (2) different types of threats to public health. Question whether the design of these measures allows for the sufficient protection of the population in the face of an imminent threat. Justify your response.
Examine two to three (2-3) changes to the preparedness policies of your chosen state and federal government agencies. Determine the significant social, political, or environmental factors that have influenced these changes. Provide support for your rationale.
.
Analyze two (2) advantages and two (2) disadvantages of creati.docxjack60216
Analyze two (2) advantages and two (2) disadvantages of creating portable learning assets for an LMS.
Research alternatives to Shareable Content Object Reference Model (SCORM). Determine at least one (1) alternative to SCORM and recommend a way for an organization of your choice to package its assets to make them portable. Explain your rationale.
.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
ELE2303 Assign 1 Page 1 ELE2303 Embedded Systems Design.docx
1. ELE2303 Assign 1 Page | 1
ELE2303 Embedded Systems Design
Assignment 1 – Gas Monitor Unit Stage 1
Description Marks out of Wtg (%) Due date
Gas Monitor Unit – Stage 1 200 20 28/04/14
Purpose
This assessment is intended to evaluate the student’s capability
in selecting and configuring a
microcontroller unit (MCU), designing simple interface
hardware and writing subroutines to
operate those interfaces.
Please note – the purpose of studying a ‘design’ course like
this, is that you learn how to design
hardware and write programs to solve new problems. This
requires you to understand the how
individual parts of the microcontroller function and how to
control them with a program. You are
expected to link together pieces of interface circuitry and
combine segments of program you
2. learn about in the course materials, into a structured solution.
Do not expect to find a ‘solution’
to this problem on the internet. Expect that you have to create
it!
Grading of this assessment
This task will be assessed against the course objectives 1, 2, 3,
4, 6 and 7. This assessment will
be graded (F, C, B, A, HD) using a rubric marking scheme
against criteria such as: the
appropriate selection and use of microcomputer hardware; the
design of I/O hardware to meet a
specification; implementation of software to meet a
specification; quality of documentation
including organisation of ideas and format; spelling, grammar
and punctuation. Note - this
course is a communications benchmark course, hence marks will
be awarded for the quality of
documentation.
Assignment Requirements
This assessment requires students to meet the requirements the
specification below. Select a
suitable microcontroller from the PIC18 family, design simple
interface hardware, write
3. and test some C programs (subroutines) to operate the hardware
interface and then document
the hardware and software as a proposed design. Software is to
be written in C using the
MPLAB X IDE. You must create an MPLAB X project which
may include one or more C
source files. The testing is to be completed using either: the
Oshonsoft PIC18 simulator or the
MPLAB X simulator.
There is NO requirement to assemble any hardware, or layout a
PCB for this assignment.
The circuit design for the hardware may be drawn using
electronics CAD software, OR hand-
drawn and scanned, for inclusion in the documentation. The
‘hardware’ can be successfully
configured and simulated on the Oshonsoft PIC18 simulator or
the MPLAB simulator. A few
screen captures of the software under-going testing are to be
included in the documentation.
ELE2303 Assign 1 Page | 2
Each student is required to submit:
1. A report in PDF format which includes:
4. a brief introduction (100 – 150 words) outlining the design
requirements based on the
specification.
– 300 words) explaining the key
elements of the design and
how they meet the specification, plus include a single page
circuit diagram of the
proposed hardware. You must specify all part numbers and the
values of any discrete
components used (ie. resistors, capacitors, crystals). Show any
calculations you make to
check the scaling and resolution of analog input values.
– 300 words) briefly
explaining each of the
subroutines and how they meet the specification, plus include a
copy of the C source
code showing all the subroutines.
tware (250 – 300
words) explaining what is
working and isn’t working, plus include a few screen captures
of the Oshonsoft or
MPLAB X simulator showing the software under-going testing.
The document should be formatted as a report and must
include:
5. -headings
captions
eader of the
document
document
2. A copy of the program source file(s) as:
(directory) you created for the
assignment
Notes on plagiarism or collusion
This is an individual assessment. Students must write and
submit their own hardware design,
program and documentation. Students may discuss concepts and
methods of implementation
with others, but it is forbidden to share circuits and source code
or copy another student’s
work. Discuss how to do it, but come up with your own work.
6. For this sort of assessment two or more students submitting the
same circuit or program may be
considered as plagiarism or collusion. There are several ways
that each part of a program may be
implemented, so two ‘independently’ written programs are
highly unlikely to be identical.
“Working together on the assignment” should not result in
exactly the same design or program.
Also re-using assignment work from past years is also not
allowable and easy to identify.
Plagiarism is very easy to identify!
Students are also warned that paying someone else to do your
assignment is considered a serious
breach of regulations. This too is very easy to identify!
ELE2303 Assign 1 Page | 3
The System Specification
Outline of the task
You have been requested by your Senior Engineer to design a
7. Gas Monitor Unit (GMU) and
prepare a report detailing your proposed solution. The client
requires a microcontroller based
unit to measure the gas concentration from multiple gas sensors,
compare each gas concentration
against an alarm level and trigger the alarm if any gas
concentration exceeds the alarm level set
by the user. The alarm level is to be entered into the unit via a
set of buttons and a display will be
used to provide output to the user.
Stage 1 of the project (this assignment) requires you to (a)
design the hardware for a PIC18
microcontroller and the input/output circuitry required to
interface the sensors, buttons, display
and any other specified devices to meet the hardware
requirements and (b) write a set of simple
input/output subroutines (in C) only to operate each interface
according to the input/output
requirements.
[ Stage 2 (assignment 2) will require you to write a main
program to operate the fully functional
gas monitoring and alarm system. Some additional hardware
8. may also be required. ]
Hardware Requirements
Microprocessor support circuitry
components necessary to
operate a PIC18 processor at a clock speed of 20MHz.
equired
as the PIC18 includes this.
using a 5Volt power supply.
(Note that the 5V power supply itself is not part of this design
problem.)
Microcontroller Interfacing
e to be connected to the GMU. Each gas
sensor has a single 4 to 20mA
current output which indicates a gas concentration from 0 to
1000 ppm (parts per million).
[ ie. A continuously variable (analog) output from 4mA = 0ppm
to 20mA = 1000ppm ]
A current output of less than 4mA is an indication of a fault on
that sensor.
9. Figure 1. Sensor and resistor termination.
As shown in Figure 1 - the current from each sensor is
terminated into a 250ohm resistor to
convert it into an analog voltage between 1 and 5 Volts. This
analog voltage needs to be
converted to digital value inside the processor to represent a gas
concentration between 0
and 1000 (ppm), with a minimum resolution of 5ppm.
gas
sensor
4 to 20mA
0 to 5 V
+
0
ELE2303 Assign 1 Page | 4
circuitry are to be provided as inputs
from the user to control the software operation and to set the
alarm level. They are to be
10. labelled as: Exit, Up, Down, and Enter
LED indicators of different colours are to be used to
indicate the operational state of the
GMU program as: Run, Enter alarm value or Fault detected.
-segment display is required to display either the
gas concentration of a selected
sensor input or the alarm level during the alarm level setting
process. The display is not to
be multiplexed.
indicate a ‘no alarm’ condition and
switched to inactive (off) when an alarm condition (including
sensor fault) is detected. This
relay will thus provide a fail-safe alarm indication if the GMU
loses power.
-to/out-of the controller must be logically
grouped and connect to the GMU
circuit board via suitably sized connector each with a 0 Volt
(GND) reference signal.
(Note that the type or model of connector is not significant to
the assignment; just show a
connector as a rectangle with a single row of numbered pins.)
11. Input/Output Requirements (8 parts)
The following subroutines must be written:
(Note you are NOT allowed to use any library functions
provided with MPLAB X or XC8.
Write directly to the special function registers controlling the
ports and the ADC.)
Part 1. Write a C subroutine called initports to initialise the
I/O ports you have chosen in your
hardware design for the button inputs, alarm and LED outputs
and the seven segment display.
Part 2. Write a C subroutine called initadc to initialise the
ADC ready to read any sensor input
(as in part 3).
Part 3. Write a C function called sensor which accepts a
parameter ‘s’, starts a conversion on
the analog channel specified by ‘s’, scales that converted value
to the range 0 to 1000ppm and
returns the scaled sensor value as an integer. This function is to
return -1 if a sensor error is
detected.
12. Part 4. Write a C function called buttons to read the status of
all buttons and return an
integer whose value is 0 if no button is pressed, 1 for the Exit
button, 2 for the Up button, 3
for the Down button and 4 for the Enter button. Assume only
one button is active at any
instant.
Part 5. Write a C subroutine called leds that accepts a
parameter ‘n’, where the value ‘n’
(between 0 and 7) is used to control the 3 LED indicators Run,
Enter and Fault. A value of n=4
will turn on the Run LED, n=2 will turn on the Enter LED, n=1
will turn on the Fault LED, n=0
will turn all LEDs off. Assume only one LED is on at any
instant.
Part 6. Write a C subroutine called alarm that accepts a
parameter ‘a’, to control the alarm
relay, where a=1 turns the relay off (triggering the alarm) and
a=0 turns the relay on (no alarm).
13. ELE2303 Assign 1 Page | 5
Part 7. Write a C subroutine called display that accepts a
parameter ‘c’, to display the gas
concentration ‘c’ onto the 4 digit seven segment display. The
display is not multiplexed.
Part 8. Write a main C program calls all the subroutines in
some logical sequence so that their
functions can be tested on a simulator. The main program
should include multiple loops to test
each possible sensor input, each button press, each LED output,
the control of the relay output
and show a range of values on the seven segment display.
End of specification
If you have any questions on the assignment post them to the
assignment discussion forum so a
common answer is available to all students at the same time.