ECCF ppt.pdf
•
0 likes•7 views
ECCF is the departmental forum of the Electronics, Computer, and Communication departments at Amrita University. It provides a platform for interaction between students and teachers through various events like workshops, seminars, projects exhibitions, and industrial visits related to electronics, computers, and communication. The forum helps students gain practical hands-on experience and learn about trending technologies through its many technical and non-technical events and publications.
Report
Share
Report
Share
Download to read offline
Recommended
eccf.pptx
ECCF is the departmental forum of the Electronics and Communications department at Amrita University. It provides a platform for students and teachers to interact and for students to learn basics of electronics, computers, and communication through hands-on experiences with technology, seminars, events, workshops, industrial visits and more. Some of ECCF's major events include Electronica, TechMania, Invited Talks, Pradarshan and 2-day workshops.
IEEE
- IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. It has over 420,000 members across more than 160 countries.
- IEEE Helwan Student Branch is one of IEEE's active student branches in Egypt, founded in 2010. It is known for its annual academic program and has received awards like the Darrel Chong student activity award.
- The summary highlights some of IEEE Helwan Student Branch's upcoming programs, including workshops on competitions like IEEEXtreme and robotics, as well as a new focus on self-learning resources.
Kent State University Makerspace (proposal)
The document describes Kent State University's plans to open a Makerspace on campus. A Makerspace is a shared space where students can design, create, and build projects using tools and technologies. Kent State's Makerspace will be located in the university library and will have four areas - a lounge, tech lab, small fabrication space, and art/dry space. It will contain tools like 3D printers, laser cutters, and electronics equipment. Trained staff will offer workshops to help students gain skills. The Makerspace aims to promote collaboration across disciplines, hands-on learning, and innovation. It is part of a three-phase plan to support entrepreneurship through expanded fabrication facilities on and off campus.
AcaWri - 00 - Intro_2021.pdf
This document provides an introduction to a course on academic writing. It outlines the objectives to clearly and concisely communicate work in academic environments. The instructor, Andrea Molinari, is introduced, along with their background and areas of research. Students will be assessed through writing a 3+ page academic paper on a topic of their choice, using literature review methodology. The deadline for the final paper version is 3 days before the exam session.
Insight into ACM_fdp22022022.pptx
The document provides information about the Association for Computing Machinery (ACM), including its goals, special interest groups, chapters, membership benefits, and initiatives in India. ACM is the world's largest computing society that supports the professional growth of its members through opportunities for learning, career development, and networking. It aims to advance computing as a science and practice through its conferences, publications, and educational resources.
IEEE UNED Student Branch & Education Society presentation 2014 02
This document discusses the IEEE (Institute of Electrical and Electronics Engineers) and its Education Society. It provides information about:
- IEEE being the world's largest technical professional organization with over 429,000 members across 150 countries.
- The IEEE Education Society being a global leader in engineering education, with the goal of advancing education, supporting students and members, and developing premier conferences.
- Details about IEEE publications, conferences, standards development, online communities, and the objectives of the Education Society.
Technologies of Makerspaces
A makerspace is a community space where people can gather to work on projects using tools and expertise available. The document discusses what a makerspace is and provides examples of the types of tools, technologies, and projects typically seen in makerspaces. It outlines considerations for starting a makerspace, including determining user needs and available space, tools, and resources. The main technologies discussed include 3D printing, electronics, robotics, and wearable technology. Prototyping, electronics hobbyist projects, and teaching STEM concepts are highlighted as common activities supported by makerspaces.
The best invention ever,4b ppt
This document provides instructions for students to design and present their idea for "the perfect gadget". It encourages students to be creative in developing an original, practical, and user-friendly technological invention. It outlines that students will present their gadget to the class, who will take notes to ask questions afterwards, and that presentations should introduce the product, describe its technical features and benefits over other products, and give pricing and availability details.
Recommended
eccf.pptx
ECCF is the departmental forum of the Electronics and Communications department at Amrita University. It provides a platform for students and teachers to interact and for students to learn basics of electronics, computers, and communication through hands-on experiences with technology, seminars, events, workshops, industrial visits and more. Some of ECCF's major events include Electronica, TechMania, Invited Talks, Pradarshan and 2-day workshops.
IEEE
- IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. It has over 420,000 members across more than 160 countries.
- IEEE Helwan Student Branch is one of IEEE's active student branches in Egypt, founded in 2010. It is known for its annual academic program and has received awards like the Darrel Chong student activity award.
- The summary highlights some of IEEE Helwan Student Branch's upcoming programs, including workshops on competitions like IEEEXtreme and robotics, as well as a new focus on self-learning resources.
Kent State University Makerspace (proposal)
The document describes Kent State University's plans to open a Makerspace on campus. A Makerspace is a shared space where students can design, create, and build projects using tools and technologies. Kent State's Makerspace will be located in the university library and will have four areas - a lounge, tech lab, small fabrication space, and art/dry space. It will contain tools like 3D printers, laser cutters, and electronics equipment. Trained staff will offer workshops to help students gain skills. The Makerspace aims to promote collaboration across disciplines, hands-on learning, and innovation. It is part of a three-phase plan to support entrepreneurship through expanded fabrication facilities on and off campus.
AcaWri - 00 - Intro_2021.pdf
This document provides an introduction to a course on academic writing. It outlines the objectives to clearly and concisely communicate work in academic environments. The instructor, Andrea Molinari, is introduced, along with their background and areas of research. Students will be assessed through writing a 3+ page academic paper on a topic of their choice, using literature review methodology. The deadline for the final paper version is 3 days before the exam session.
Insight into ACM_fdp22022022.pptx
The document provides information about the Association for Computing Machinery (ACM), including its goals, special interest groups, chapters, membership benefits, and initiatives in India. ACM is the world's largest computing society that supports the professional growth of its members through opportunities for learning, career development, and networking. It aims to advance computing as a science and practice through its conferences, publications, and educational resources.
IEEE UNED Student Branch & Education Society presentation 2014 02
This document discusses the IEEE (Institute of Electrical and Electronics Engineers) and its Education Society. It provides information about:
- IEEE being the world's largest technical professional organization with over 429,000 members across 150 countries.
- The IEEE Education Society being a global leader in engineering education, with the goal of advancing education, supporting students and members, and developing premier conferences.
- Details about IEEE publications, conferences, standards development, online communities, and the objectives of the Education Society.
Technologies of Makerspaces
A makerspace is a community space where people can gather to work on projects using tools and expertise available. The document discusses what a makerspace is and provides examples of the types of tools, technologies, and projects typically seen in makerspaces. It outlines considerations for starting a makerspace, including determining user needs and available space, tools, and resources. The main technologies discussed include 3D printing, electronics, robotics, and wearable technology. Prototyping, electronics hobbyist projects, and teaching STEM concepts are highlighted as common activities supported by makerspaces.
The best invention ever,4b ppt
This document provides instructions for students to design and present their idea for "the perfect gadget". It encourages students to be creative in developing an original, practical, and user-friendly technological invention. It outlines that students will present their gadget to the class, who will take notes to ask questions afterwards, and that presentations should introduce the product, describe its technical features and benefits over other products, and give pricing and availability details.
UTEK Information Session
The document provides information about UTEK, the University of Toronto Engineering Kompetitions, which is a two-day annual student competition event held in January. It outlines the seven competition categories students can participate in, including design, programming, consulting, and others. Details are provided about schedule, registration process and costs, volunteer opportunities, and maximum team capacities for each competition category.
Exhibition (ExOP)
Four students presented a project proposal for creating a virtual exhibition Android application to their professor. The presentation introduced the concept of online exhibitions as alternatives to physical exhibitions that overcome limitations of space, time and location. It described how a virtual exhibition allows global access to museum collections. The objectives of the proposed app are to provide a platform for virtual trade shows and active participation by visitors. The presentation covered the proposed system architecture, which would include registration/login, event creation functions for organizers, and viewing of current events for users. It concluded by discussing the software and hardware requirements to develop the Android application.
Code workshop
Lancaster-Lebanon IU13 is pleased to announce our first Code.Org Workshop for Teachers on May 24, 2016.
Assessment and recognition in technical massive open on-line courses with and...
Assessment and recognition in technical massive open on-line courses with and without on-line laboratories - Manuel Castro
FETC 2015 Conference Brochure
This document provides information about the 2015 National Conference on Educational Technology (FETC). The conference will take place from January 20-23 in Orlando, Florida, and will feature over 400 sessions, 150 workshops, an exhibit hall with over 500 vendors, and special events. Attendees can learn about emerging technologies, STEM, mobile learning, and other topics through hands-on demonstrations and expert presentations.
Electronics society
The Electronics Society of NIT Rourkela aims to provide students opportunities to develop knowledge and skills in electronics. It seeks to create a platform for students to interact, develop practical and experimental abilities, and promote job awareness. The society will organize lectures, projects, seminars and technical events to empower students and enable them to apply electronics skills to address real-world problems. It will maintain a website and publish materials to support students' learning and development.
Do it yourself lab brochure
The DIY lab provides tools and expertise to help students develop innovative solutions to problems. It is equipped with advanced fabrication tools like 3D printers and laser cutters. Students can work on projects, learn new technologies, and prototype ideas with support from subject matter experts. Past projects include an electronic quiz board, smart dustbins, and 3D printed jewelry. The lab offers workshops, training for teachers, and annual memberships to empower students to turn their ideas into a reality.
Proddec - CEC
PRODDEC is a technical organization at CEC that was established in 1995 to integrate technical ideas and develop engineering products. Its vision is to provide practical training to students to apply their theoretical knowledge. The organization's main departments include hardware development, software development, multimedia, and public relations. Some of PRODDEC's achievements include developing products for the college, participating in technical competitions and festivals, and providing technical support for college events. Future plans include developing more products for the college, industrial visits, robotics programs, workshops, and restarting their annual magazine.
Model Technology Enhanced Classrooms
With a mandate from our IT Steering Committee and a wee pot of money Okanagan College built Model Technology Enhanced Classrooms at each of our 4 campuses this past year. The intent was to provide instructors with an opportunity to gain familiarity with educational technologies currently in use but not available to everyone at OC. It also came at a time when we are wrestling with the demise of VGA as a universal connection standard, and instructors wanting to use iPads for teaching, and students wanting to be able to display on the projector, and bringing in guest speakers using Skype, and running a backchannel, and … So we built them. And we learned a lot of things along the way. And I’ll tell you about them. http://www.okanagan.bc.ca/Campus_and_Community/employees/itservices/edtech/Model_Tech_Classroom.html Since 2005 Mike Minions has been the Educational Technology Coordinator at Okanagan College.
Top 10 Education Tech Blogs
Benefits of Reading Tech Blogs
* Promote autonomous learning
* Exchange ideas on various trending topics
* Encourage discussions
* Motivate to become readers and writers
* Make you future-ready
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...Environmental Consortium for Leadership Development (EcoLeaD)
【平成25年度 環境人材育成コンソーシアム(EcoLeaD）事業】
日付：平成25年12月14日
イベント：第3回アジア環境人材育成研究交流大会-国際シンポジウム1部
タイトル：社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Design ? Educating Technically- Grounded leaders and innovators for the 21st Century
発表者：チョン・トウ・チョン 氏（シンガポール科技設計大学学長） / Prof. Chong Tow Chong(Provost, University of Singapore Technology and Design)
詳細：http://www.eco-lead.jp/active/seminar/2013-2/Learning and exploring with new technology at Dundee and Angus College
The Learning Lab at Dundee and Angus College is a space to promote the use of innovative technology through hands on learning, with the support of learning technologies staff.
In this demo you will see examples of how staff and learners have the opportunity to explore, experiment, create and learn using emerging technology in a safe, exciting space full of technology, which includes virtual and augmented reality, 3D capture/printing and drones.
The facility creates a 21st century learning experience which stimulates and enhances the student experience as well as providing opportunities to develop new skills
ENGINEERING PROJECTS EXHIBITION 2018 PROSPECTUS
The Engineering Projects Exhibition (EPEX) is a platform to
showcase and demonstrate the best of the various innovative
engineering projects, undertaken by the undergraduate
students in Nigeria. To broaden the horizons, EPEX2018 shall
tolerate interested engineering students in all Nigerian
Universities.
IEEE Student and Professional Membership Benefits
The document discusses the benefits of IEEE membership. It describes IEEE as the world's largest technical professional organization with over 850,000 members across 160 countries. It outlines various membership grades and benefits for students, including scholarships, competitions, networking opportunities, and career development resources. It also discusses benefits for industry professionals, such as resources to stay up-to-date with emerging technologies through publications, online courses, and networking opportunities within the global IEEE community.
Open source hardware for academic projects
This document discusses open source hardware for academic projects. It begins by defining open source hardware as hardware whose designs are publicly available so anyone can study, modify, distribute and sell the design. Open source hardware uses readily available components and standard processes to maximize individual ability to make and use hardware. Examples of open source hardware are given at different levels from silicon chips to finished products. Factors for comparing different open hardware platforms are outlined. The document emphasizes that getting design details and proportions right before adding finer details is important. It highlights that the student should be at the center of their academic project and use information wisely while embracing constraints.
School libraries in the bad old days
This document discusses the impact of technology on school libraries. It notes that the greatest impact came from personal computers, which automated tasks like circulation and cataloging and allowed access to digital resources on the internet. The document advocates that school librarians should embrace new technologies, be comfortable troubleshooting problems, and get sufficient training to stay on the leading edge of technology adoption in order to meet students' needs and expectations.
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...eLearning Consortium 電子學習聯盟
By Ms. Winnie Wong, Head of Marketing, HK Cyberport Management Company Limited & Ms. Leona Wong, Executive Director, HK Wireless Technology Industry Association (WTIA) PolyU Design I Make Initiative (2015-08-13)
This is for promoting the I MAKE initiative from PolyU Design (School of Design, the Hong Kong Polytechnic University) to local teachers. This initiative is aiming at promoting the importance of making and the maker culture to students, parents and teachers in local primary and secondary schools. This is relevant to teaches from the following subjects/disciplines: visual arts, design and technology, information technology, science and mathematics.
Project Guidelines-LMU TOPUP.pptx
- The document provides guidelines for students on completing their final project for the Top-Up Program at LMU, including details on the project module, selecting a topic, developing a proposal, deliverables, and the role of the project supervisor.
- It explains that a project proposal should be 4 pages and include an introduction, background, problem statement, objectives, proposed solution, requirements, deliverables, work plan, and references. Regular meetings with the assigned academic supervisor are required.
- The final project deliverables are a proposal, interim report, dissertation, and viva presentation. Students are advised to select a complex topic that demonstrates their skills and start planning early with support from academic staff.
Project competitions for students
The document discusses several major project competitions for students, including the Motorola Scholar Programme, IBM's Great Mind Challenge, and Microsoft's Imagine Cup. It provides details on the eligibility and prizes for each competition, as well as the resources available to students to develop their projects, such as free software, online tutorials, mentoring support, and more. The competitions aim to help students gain real-world experience by working on practical projects, while also developing skills like problem solving, teamwork, and communications that will benefit their careers.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
More Related Content
Similar to ECCF ppt.pdf
UTEK Information Session
The document provides information about UTEK, the University of Toronto Engineering Kompetitions, which is a two-day annual student competition event held in January. It outlines the seven competition categories students can participate in, including design, programming, consulting, and others. Details are provided about schedule, registration process and costs, volunteer opportunities, and maximum team capacities for each competition category.
Exhibition (ExOP)
Four students presented a project proposal for creating a virtual exhibition Android application to their professor. The presentation introduced the concept of online exhibitions as alternatives to physical exhibitions that overcome limitations of space, time and location. It described how a virtual exhibition allows global access to museum collections. The objectives of the proposed app are to provide a platform for virtual trade shows and active participation by visitors. The presentation covered the proposed system architecture, which would include registration/login, event creation functions for organizers, and viewing of current events for users. It concluded by discussing the software and hardware requirements to develop the Android application.
Code workshop
Lancaster-Lebanon IU13 is pleased to announce our first Code.Org Workshop for Teachers on May 24, 2016.
Assessment and recognition in technical massive open on-line courses with and...
Assessment and recognition in technical massive open on-line courses with and without on-line laboratories - Manuel Castro
FETC 2015 Conference Brochure
This document provides information about the 2015 National Conference on Educational Technology (FETC). The conference will take place from January 20-23 in Orlando, Florida, and will feature over 400 sessions, 150 workshops, an exhibit hall with over 500 vendors, and special events. Attendees can learn about emerging technologies, STEM, mobile learning, and other topics through hands-on demonstrations and expert presentations.
Electronics society
The Electronics Society of NIT Rourkela aims to provide students opportunities to develop knowledge and skills in electronics. It seeks to create a platform for students to interact, develop practical and experimental abilities, and promote job awareness. The society will organize lectures, projects, seminars and technical events to empower students and enable them to apply electronics skills to address real-world problems. It will maintain a website and publish materials to support students' learning and development.
Do it yourself lab brochure
The DIY lab provides tools and expertise to help students develop innovative solutions to problems. It is equipped with advanced fabrication tools like 3D printers and laser cutters. Students can work on projects, learn new technologies, and prototype ideas with support from subject matter experts. Past projects include an electronic quiz board, smart dustbins, and 3D printed jewelry. The lab offers workshops, training for teachers, and annual memberships to empower students to turn their ideas into a reality.
Proddec - CEC
PRODDEC is a technical organization at CEC that was established in 1995 to integrate technical ideas and develop engineering products. Its vision is to provide practical training to students to apply their theoretical knowledge. The organization's main departments include hardware development, software development, multimedia, and public relations. Some of PRODDEC's achievements include developing products for the college, participating in technical competitions and festivals, and providing technical support for college events. Future plans include developing more products for the college, industrial visits, robotics programs, workshops, and restarting their annual magazine.
Model Technology Enhanced Classrooms
With a mandate from our IT Steering Committee and a wee pot of money Okanagan College built Model Technology Enhanced Classrooms at each of our 4 campuses this past year. The intent was to provide instructors with an opportunity to gain familiarity with educational technologies currently in use but not available to everyone at OC. It also came at a time when we are wrestling with the demise of VGA as a universal connection standard, and instructors wanting to use iPads for teaching, and students wanting to be able to display on the projector, and bringing in guest speakers using Skype, and running a backchannel, and … So we built them. And we learned a lot of things along the way. And I’ll tell you about them. http://www.okanagan.bc.ca/Campus_and_Community/employees/itservices/edtech/Model_Tech_Classroom.html Since 2005 Mike Minions has been the Educational Technology Coordinator at Okanagan College.
Top 10 Education Tech Blogs
Benefits of Reading Tech Blogs
* Promote autonomous learning
* Exchange ideas on various trending topics
* Encourage discussions
* Motivate to become readers and writers
* Make you future-ready
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...Environmental Consortium for Leadership Development (EcoLeaD)
【平成25年度 環境人材育成コンソーシアム(EcoLeaD）事業】
日付：平成25年12月14日
イベント：第3回アジア環境人材育成研究交流大会-国際シンポジウム1部
タイトル：社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Design ? Educating Technically- Grounded leaders and innovators for the 21st Century
発表者：チョン・トウ・チョン 氏（シンガポール科技設計大学学長） / Prof. Chong Tow Chong(Provost, University of Singapore Technology and Design)
詳細：http://www.eco-lead.jp/active/seminar/2013-2/Learning and exploring with new technology at Dundee and Angus College
The Learning Lab at Dundee and Angus College is a space to promote the use of innovative technology through hands on learning, with the support of learning technologies staff.
In this demo you will see examples of how staff and learners have the opportunity to explore, experiment, create and learn using emerging technology in a safe, exciting space full of technology, which includes virtual and augmented reality, 3D capture/printing and drones.
The facility creates a 21st century learning experience which stimulates and enhances the student experience as well as providing opportunities to develop new skills
ENGINEERING PROJECTS EXHIBITION 2018 PROSPECTUS
The Engineering Projects Exhibition (EPEX) is a platform to
showcase and demonstrate the best of the various innovative
engineering projects, undertaken by the undergraduate
students in Nigeria. To broaden the horizons, EPEX2018 shall
tolerate interested engineering students in all Nigerian
Universities.
IEEE Student and Professional Membership Benefits
The document discusses the benefits of IEEE membership. It describes IEEE as the world's largest technical professional organization with over 850,000 members across 160 countries. It outlines various membership grades and benefits for students, including scholarships, competitions, networking opportunities, and career development resources. It also discusses benefits for industry professionals, such as resources to stay up-to-date with emerging technologies through publications, online courses, and networking opportunities within the global IEEE community.
Open source hardware for academic projects
This document discusses open source hardware for academic projects. It begins by defining open source hardware as hardware whose designs are publicly available so anyone can study, modify, distribute and sell the design. Open source hardware uses readily available components and standard processes to maximize individual ability to make and use hardware. Examples of open source hardware are given at different levels from silicon chips to finished products. Factors for comparing different open hardware platforms are outlined. The document emphasizes that getting design details and proportions right before adding finer details is important. It highlights that the student should be at the center of their academic project and use information wisely while embracing constraints.
School libraries in the bad old days
This document discusses the impact of technology on school libraries. It notes that the greatest impact came from personal computers, which automated tasks like circulation and cataloging and allowed access to digital resources on the internet. The document advocates that school librarians should embrace new technologies, be comfortable troubleshooting problems, and get sufficient training to stay on the leading edge of technology adoption in order to meet students' needs and expectations.
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...eLearning Consortium 電子學習聯盟
By Ms. Winnie Wong, Head of Marketing, HK Cyberport Management Company Limited & Ms. Leona Wong, Executive Director, HK Wireless Technology Industry Association (WTIA) PolyU Design I Make Initiative (2015-08-13)
This is for promoting the I MAKE initiative from PolyU Design (School of Design, the Hong Kong Polytechnic University) to local teachers. This initiative is aiming at promoting the importance of making and the maker culture to students, parents and teachers in local primary and secondary schools. This is relevant to teaches from the following subjects/disciplines: visual arts, design and technology, information technology, science and mathematics.
Project Guidelines-LMU TOPUP.pptx
- The document provides guidelines for students on completing their final project for the Top-Up Program at LMU, including details on the project module, selecting a topic, developing a proposal, deliverables, and the role of the project supervisor.
- It explains that a project proposal should be 4 pages and include an introduction, background, problem statement, objectives, proposed solution, requirements, deliverables, work plan, and references. Regular meetings with the assigned academic supervisor are required.
- The final project deliverables are a proposal, interim report, dissertation, and viva presentation. Students are advised to select a complex topic that demonstrates their skills and start planning early with support from academic staff.
Project competitions for students
The document discusses several major project competitions for students, including the Motorola Scholar Programme, IBM's Great Mind Challenge, and Microsoft's Imagine Cup. It provides details on the eligibility and prizes for each competition, as well as the resources available to students to develop their projects, such as free software, online tutorials, mentoring support, and more. The competitions aim to help students gain real-world experience by working on practical projects, while also developing skills like problem solving, teamwork, and communications that will benefit their careers.
Similar to ECCF ppt.pdf (20)
Assessment and recognition in technical massive open on-line courses with and...
Assessment and recognition in technical massive open on-line courses with and...
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...
【平成25年度】社会設計で築くより良い世界- 工学的素養を有する21世紀型リーダーとイノベーターの育成 / A Better World by Desig...
Learning and exploring with new technology at Dundee and Angus College
Learning and exploring with new technology at Dundee and Angus College
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...
Education 2.9 Cyberport – “A leading ICT hub in Asia-Pacific Region” & WTIA –...
Recently uploaded
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaAdvanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
ECCF ppt.pdf
- 2. What is ECCF? • ECCF is the departmental forum of ECE and EAC • It’s a platform of interaction between students and teachers. • ECCF helps in learning the basics of electronics.
- 3. Why ECCF? •Practical,hands-on-experience with electronics, computer and communication. •Platform to unleash and display your true potential. •Acquiring knowledge about the trending technology and gadgets. •Learning what we desire to learn and what industries needs. •Fun filled Tech interactions, events, seminars, etc.
- 4. Beyond the Blackboard • Acknowledges the students about the teachers in the department and their specialization. • Gives an idea to the students on whom to contact during their projects. -Know Your teachers
- 5. Invited Talk (Phase 1&2) • Gives exposure to the outside world and the experiences in the fields of electronics, communications and computer science. • We call Esteemed guests to share their insights in their field of experience.
- 6. TechMania • Highlights various gadgets • Explains the working of components.
- 7. Electronica • Flagship event of ECCF which lasts for 24 hours. • Simulation of a circuit using some tools. • Design and rig up a circuit practically.
- 8. Videotronics • Social media interaction • Discuss upcoming technologies and ongoing researches. • Videos made by the forum which spark curiosity.
- 9. Electro-Artico • Weekly in-house publications from ECCF • Brings you articles about articles on the discoveries and innovations around the world in the fields of electronics , communications and computer science.
- 10. Industrial Visit • Join us in exploring top companies and industries • Learn from the best • Opportunities to interact with industry Experts
- 11. Aviral • Covers the latest tech devops • A group of dedicated people coming together to learn and share knowledge.
- 12. Arohan • Students from various schools come together to our campus • Participation in the events conducted by all the technical and non-technical forums of amrita. • This event attracts students to engage and learn engineering through fun ways.
- 13. Pravidhi • Technical event conducted in our college where all the technical forums conduct various events. • Prabidhi will conduct events that make learning a fun experience.
- 16. 2-Day Workshop • A 48-hour event where students and teachers come together to rig up circuits. • The best circuit wins a prize. • Discuss and create anything.
- 17. Pradarshan • Annual project exhibition • Projects can be of any embedded design in hardware or a MATLAB based project.
- 18. Gadget Geeks • Exploring the intricacies of a hybrid vehicle and the progress achieved in research. • Keeps you updated with latest technologies.
- 19. Ideathon
- 20. Social media techweek • Event which uplifts the Social Media platform of ECCF.
- 21. Video…