Roberto Tejada Unay is seeking a position as a tire technician in Qatar. He has experience performing tasks like tire repairs, replacements, rotations, and balancing. His responsibilities include safely lifting vehicles, removing and mounting tires, identifying and repairing punctures, and using computer wheel balancing equipment. He is focused on providing good customer service and can perform roadside assistance when needed.
Dear Sir,
I'm Subramanian Narayanasamy from saudi arabia working in NES Global Ltd Client SADARA PETROCHEMICAL COMPANY and I have 14 years experiences in oil & gas company Maintenances field.
MY CONTRACT END OF THIS MONTH JANUARY-31-2018 PLEASE ANY VACANCES IN OUR CONCERN
PLEASE CONSIDER MY CV .
Dear Sir,
I'm Subramanian Narayanasamy from saudi arabia working in NES Global Ltd Client SADARA PETROCHEMICAL COMPANY and I have 14 years experiences in oil & gas company Maintenances field.
MY CONTRACT END OF THIS MONTH JANUARY-31-2018 PLEASE ANY VACANCES IN OUR CONCERN
PLEASE CONSIDER MY CV .
Works on the principle of slider-crank mechanism with flywheel, motor and a pulley attached to it.
1. The machine can solve the problem of time consumption.
2. Waste of resources in face of labor cost is reduced.
3. The machine can be used in the industry where it is manufactured, at the packaging sector.
4. And it is used as hardware in large quantity like in fabrication of machine
5. It provide alternative for industries aiming toward reducing human effort
6. It generates sustainable and practical automation solutions for the future industrial development.
Pneumatic Sheet Metal Shearing Machine - Project reportTejas Inamdar
Hi,
here is a report on Pneumatic Sheet Metal Shearing Machine,
done by us,
if any one wants further detail about it, please contact me on my email -
inamdar.tejas421@gmail.com
1. CURRICULUM VITAE
ROBERTO TEJADA UNAY
E-mail :unayroberto972@yahoo.com
Mobile no.+97433475614
Home Present Address: Zone 56 - Alkhulaifat / Al Mamoura / Abu Street
340 - Salwa Road Doha Qatar
Company: Almuftah Group Company
Tire and Lubricant Oil ( Tire Division )
Company Joined: April 2015 - Oct.2015 up to Present
CAREER OBJECTIVE: to lend a hand in your company's mission and vission through
sharing my knowledge and skills.
OBJECTIVE: Position as tire tiechnician that will allow me to utilize both my
extensive technicial and customer service experience
STATEMENT OF PRIMARY DUTIES
perform customer service include flat tires repair,replacement,tire rotation,tire
2. fitting or mounting and dismounting used of machine change and also tire
rotatin,and tire evaluation,service may be performed both on the road as service
calls and the shop for repairs or maintenance.duties also include the preparation of
new vehicles for service and the decommision of old vehicles and preparation
auction.
KEY RESPONSIBILITIES
responsibilities lift a vehicles safely ,removed and refitwheels ,removed and refit
tires from the rims identify and repair punctures install new tires and the rim carry
out wheel balance fully aware of how tire fitting and used computer wheel
balancing equipment should be operated safely carry out the wheel alignment skills
customer focus adaptability effevtive communication.
inspect repair and maintain all tires and tubes on city units
performed road and field service as required.
Requisition all necessary matertials and equipment needed to perform tire and
specialty equipment.
JOB SUMMARY
Position is responsible for performing skillsed and specialize like under chassis
mechanic.or and the mechanical servicing,tire servicing,oil change, we able to repair
or replacement any mechanical works.
preventive maintenance and maintenance responds to emergency roads calls from
the customers suplies and repair outside.
DUTIES FOR AUTOMOTIVE SPECIALTY TECHNICIAN
• wheel alignment is to proper tire adjustment and also repair
axles,frames,torsion bars, and steering mechanisms of automobiles,using
special computer wheel alignment machine
• computer wheel balancing machine,and my operate also the HYDRULIC PRESS
MACHINE for solid tire fitting.
• align vehicles using a high Quality Equipment Engineering hunter computer
machine.
• repair or replace suspension problem,including tie rod,ball joint,rock end
3. bar,shock absorber if leakage or worn out gas type or flued type.
• examine vehicles compile estimates of repair cost,and secured customers
approval to perform repairs.install and diagnoses problem of the under
chassis trouble shoot repair and replace.salseman or supervisor followed the
instruction approval for the job order of the vehicles.
MECHANIC / TIRE FITTER / ALIGNMENT
DISCRIPTION :
• mechanical defects repiar
• change oil
• change brake(front),brake shoe ( rear )
• mounting & dismounting low profile tires used hunter tyre changer
• battery fitting or replace
• alternator belt,a/c belt,drive belt ingine all able fix or change
MINIMUM QUALIFICATION KNOWLEDGE SKILLS AND ABILITIES REQUIRED must
posses a high school diploma trade,or vocational courses in automotive mechanics
and considerable experince in the repair maintenance and replacement of standards
small and large vehicle tires or equipment combination of education and experience
that would provide the noted knowledge skills.
must posses a comprehensive knowledge and understanding of the
techniques,practice,tools and equipment in the repair maintenance of various types
of tires and related component.must posses and excellent knowledge of industry
standards related to installer maintenance.
must posses knowledge of and the ability to perfect practice safety procedures
when an automoyive repair on the work shop.
JOB SPECIFICATION
to perform this job sucessfully,an individual must be able to perform each assential
duty satisfactorilly,the requirements listed below are representative of the
knowledge,skills,and or ability required resonable accommodations may be made to
enable individuals with disabilities,who are otherwise Qualification essential
4. function.
EDUCATIONAL BACKGROUND
VOCATIONAL : automotive mechanic
SUPERVISOR BY: vehicle maintenance installer and repair
POSITION: tire technician
DEPARTMENT: mechanical and public works
PREVIOUS COMPANY
OTO PUWESTO INC.
address congressional ave.Project 6 Quezon city Philippines
since :2000 - 2010
POSITION: tyreman technician,wheel alignment,under chassis mechanic ,denter
painting helper