The document describes two types of regulated DC power supplies produced by an ISO 9001:2000 certified company. The single output power supply and dual output power supply models have variable outputs ranging from 0-30V and 0-3A or 0-5A, with features like high stability, adjustable voltage and current levels, and multi-digit displays. They are designed for applications requiring stable DC power and have specifications for voltage and current regulation, ripple, temperature factors, and dimensions.
This document provides specifications for the S-35 series 35W single output switching power supply. It has 1-year warranty and protections for short circuits and overloads. It comes in 4 models with output voltages of 5V, 12V, 15V, or 24V. Key specifications include output power of 35W, voltage and current tolerance ranges, input voltage range of 85-264VAC or 240-370VDC, and operating temperature range of -10 to 60 degrees C.
The document provides an introduction and overview of the Power Electronics 2 module. It discusses typical AC/DC/AC power conversion systems using line-side and motor-side converters. The module aims to provide knowledge of power electronics technologies including three-phase rectification, resonant converters, inverters, and high power converter structures. It outlines the lecture topics, recommendations, and reviews three-phase voltage supplies.
This document provides information about the MUSES01, a dual J-FET input, high quality audio operational amplifier. It is optimized for high-end audio applications and features excellent sound quality. Key specifications include an input offset voltage of 0.8mV typical and 5mV maximum, input bias current of 200pA typical and 800pA maximum, and voltage gain of 105dB typical. The amplifier has a bipolar technology, DIP8 package outline, and pin configuration shown. Application notes provide guidance on power dissipation and thermal design.
The user's manual provides instructions for safely operating two 3-phase power clamp meter models, detailing measurement functions including voltage, current, power, harmonics and frequency. Safety information is included regarding installation categories, double insulation rating, and proper use of test leads and clamp jaws. The manual also explains the various measurement functions and operation of the meters.
The document discusses various types of AC-AC converters used to convert alternating current (AC) power from one voltage or frequency to another. It describes direct AC-AC converters using thyristors in integral cycle control or phase control configurations. It also discusses indirect AC-AC converters using a DC link or AC link, as well as cycloconverters, three-phase converters, choppers, and matrix converters. Pulse width modulation techniques are used to control the output of single-phase matrix converters.
This document provides specifications for the S-35 series 35W single output switching power supply. It has 1-year warranty and protections for short circuits and overloads. It comes in 4 models with output voltages of 5V, 12V, 15V, or 24V. Key specifications include output power of 35W, voltage and current tolerance ranges, input voltage range of 85-264VAC or 240-370VDC, and operating temperature range of -10 to 60 degrees C.
The document provides an introduction and overview of the Power Electronics 2 module. It discusses typical AC/DC/AC power conversion systems using line-side and motor-side converters. The module aims to provide knowledge of power electronics technologies including three-phase rectification, resonant converters, inverters, and high power converter structures. It outlines the lecture topics, recommendations, and reviews three-phase voltage supplies.
This document provides information about the MUSES01, a dual J-FET input, high quality audio operational amplifier. It is optimized for high-end audio applications and features excellent sound quality. Key specifications include an input offset voltage of 0.8mV typical and 5mV maximum, input bias current of 200pA typical and 800pA maximum, and voltage gain of 105dB typical. The amplifier has a bipolar technology, DIP8 package outline, and pin configuration shown. Application notes provide guidance on power dissipation and thermal design.
The user's manual provides instructions for safely operating two 3-phase power clamp meter models, detailing measurement functions including voltage, current, power, harmonics and frequency. Safety information is included regarding installation categories, double insulation rating, and proper use of test leads and clamp jaws. The manual also explains the various measurement functions and operation of the meters.
The document discusses various types of AC-AC converters used to convert alternating current (AC) power from one voltage or frequency to another. It describes direct AC-AC converters using thyristors in integral cycle control or phase control configurations. It also discusses indirect AC-AC converters using a DC link or AC link, as well as cycloconverters, three-phase converters, choppers, and matrix converters. Pulse width modulation techniques are used to control the output of single-phase matrix converters.
This document provides specifications for a 25W single output switching power supply series called RS-25. It includes details on features, specifications, protections, inputs, outputs, safety standards, and mechanical specifications. The power supply comes in multiple models that provide different DC output voltages ranging from 3.3V to 48V at power levels up to 25W. It has protections for short circuits, overloads, and over voltages.
The document discusses various topics related to electrical circuits and measurements. It provides definitions for Ohm's law and its limitations, describes the differences between moving coil and moving iron instruments, lists the operating forces in indicating instruments, and defines terms like RMS value and power factor. It also gives examples of circuit analysis questions and explains the construction and working of a single phase energy meter in detail over multiple paragraphs.
This document summarizes the specifications of a 100W single output switching power supply series called the RS-100. It includes 6 models that output different voltages from 3.3V to 48V with varying current ratings. The power supplies have protections against overloads, over voltages, and short circuits. Key specifications listed are voltage and current ratings, ripple and noise levels, efficiency ratings, input voltage ranges, operating temperatures, and safety certifications. Dimensions and mounting hole locations are provided in a mechanical drawing.
This specification applies to an NPN silicon phototransistor chip called the MC-0105. It has a planar structure with aluminum alloy electrodes on the emitter and base sides and a gold alloy electrode on the collector side. The chip measures 18.1 mils by 18.1 mils by 7.5 mils thick with an active area of 12.7 mils by 12.7 mils. The chip has a minimum breakdown voltage of 80V, dark current below 100nA, and current gain above 200.
This document provides specifications for the RS-150 series 150W single output switching power supply. It has universal AC input, short circuit and over voltage protections, and provides outputs of 3.3V to 48V at currents of up to 30A. Key specifications include efficiency between 75-87%, operating temperature range of -20°C to +70°C, and compliance with various EMC and safety standards.
This specification applies to an NPN silicon phototransistor chip called the MC-1016. It has a planar structure with aluminum alloy electrodes on the emitter and base sides and a gold alloy electrode on the collector side. The chip measures 15.4 mils by 15.4 mils by 7.5 mils thick with an active area of 11 mils by 11 mils. The chip has a minimum breakdown voltage of 80V, maximum dark current of 100nA, and typical current gain of 200.
This document summarizes the modeling parameters and performance of a voltage regulator component. It describes the manufacturer, part number, and key electrical parameters used in the PSpice model. Simulation results show the input-output voltage differential is within 0.035% of measured, and ripple rejection ratio is within 1.808% of measured. The maximum output voltage error shown in simulation is 0.447% compared to measurement.
Newave provides UPS systems ranging from 1 kVA to 5 MW for power protection. They offer both standalone and modular UPS systems from 1 kVA up to 5 MVA. Innovation is a focus at Newave, where they develop new technologies for power protection and quality control.
This document provides specifications for the RS-35 series of 35W single output switching power supplies. It lists 6 models that provide different output voltages ranging from 3.3V to 48V. The power supplies have universal AC input, short circuit and overvoltage protections, and provide well-regulated output voltage with low ripple. Key specifications like output power, current, efficiency and dimensions are provided for each model.
The Statuto Train Station in Florence is currently underused and partially abandoned. COSPE NGO is leading a renovation program to turn it into a city hub for responsible tourism. This will encourage positive interaction between tourists, the local community, and travelers. Bike transport is a key topic as it provides benefits like reduced costs, pollution, and congestion. ASF Toscana is focusing on accessibility issues for people with physical impairments. They are partnering to develop and distribute a handcycle that allows wheelchair users to ride without transferring. ASF Toscana is also launching a social design initiative to create an open source platform for sharing knowledge about bamboo craftsmanship and its application for adaptive bikes and vehicles for
Este documento describe dos tipos de diagramas para representar la interacción entre usuarios, servidores e internet para acceder a una base de datos. El primer diagrama no agrupa los elementos mientras que el segundo los agrupa lógicamente.
This very short document does not contain enough contextual information to generate a meaningful 3 sentence summary. The document simply states "this is test document" without providing any additional details.
This document provides specifications for a 25W single output switching power supply series called RS-25. It includes details on features, specifications, protections, inputs, outputs, safety standards, and mechanical specifications. The power supply comes in multiple models that provide different DC output voltages ranging from 3.3V to 48V at power levels up to 25W. It has protections for short circuits, overloads, and over voltages.
The document discusses various topics related to electrical circuits and measurements. It provides definitions for Ohm's law and its limitations, describes the differences between moving coil and moving iron instruments, lists the operating forces in indicating instruments, and defines terms like RMS value and power factor. It also gives examples of circuit analysis questions and explains the construction and working of a single phase energy meter in detail over multiple paragraphs.
This document summarizes the specifications of a 100W single output switching power supply series called the RS-100. It includes 6 models that output different voltages from 3.3V to 48V with varying current ratings. The power supplies have protections against overloads, over voltages, and short circuits. Key specifications listed are voltage and current ratings, ripple and noise levels, efficiency ratings, input voltage ranges, operating temperatures, and safety certifications. Dimensions and mounting hole locations are provided in a mechanical drawing.
This specification applies to an NPN silicon phototransistor chip called the MC-0105. It has a planar structure with aluminum alloy electrodes on the emitter and base sides and a gold alloy electrode on the collector side. The chip measures 18.1 mils by 18.1 mils by 7.5 mils thick with an active area of 12.7 mils by 12.7 mils. The chip has a minimum breakdown voltage of 80V, dark current below 100nA, and current gain above 200.
This document provides specifications for the RS-150 series 150W single output switching power supply. It has universal AC input, short circuit and over voltage protections, and provides outputs of 3.3V to 48V at currents of up to 30A. Key specifications include efficiency between 75-87%, operating temperature range of -20°C to +70°C, and compliance with various EMC and safety standards.
This specification applies to an NPN silicon phototransistor chip called the MC-1016. It has a planar structure with aluminum alloy electrodes on the emitter and base sides and a gold alloy electrode on the collector side. The chip measures 15.4 mils by 15.4 mils by 7.5 mils thick with an active area of 11 mils by 11 mils. The chip has a minimum breakdown voltage of 80V, maximum dark current of 100nA, and typical current gain of 200.
This document summarizes the modeling parameters and performance of a voltage regulator component. It describes the manufacturer, part number, and key electrical parameters used in the PSpice model. Simulation results show the input-output voltage differential is within 0.035% of measured, and ripple rejection ratio is within 1.808% of measured. The maximum output voltage error shown in simulation is 0.447% compared to measurement.
Newave provides UPS systems ranging from 1 kVA to 5 MW for power protection. They offer both standalone and modular UPS systems from 1 kVA up to 5 MVA. Innovation is a focus at Newave, where they develop new technologies for power protection and quality control.
This document provides specifications for the RS-35 series of 35W single output switching power supplies. It lists 6 models that provide different output voltages ranging from 3.3V to 48V. The power supplies have universal AC input, short circuit and overvoltage protections, and provide well-regulated output voltage with low ripple. Key specifications like output power, current, efficiency and dimensions are provided for each model.
The Statuto Train Station in Florence is currently underused and partially abandoned. COSPE NGO is leading a renovation program to turn it into a city hub for responsible tourism. This will encourage positive interaction between tourists, the local community, and travelers. Bike transport is a key topic as it provides benefits like reduced costs, pollution, and congestion. ASF Toscana is focusing on accessibility issues for people with physical impairments. They are partnering to develop and distribute a handcycle that allows wheelchair users to ride without transferring. ASF Toscana is also launching a social design initiative to create an open source platform for sharing knowledge about bamboo craftsmanship and its application for adaptive bikes and vehicles for
Este documento describe dos tipos de diagramas para representar la interacción entre usuarios, servidores e internet para acceder a una base de datos. El primer diagrama no agrupa los elementos mientras que el segundo los agrupa lógicamente.
This very short document does not contain enough contextual information to generate a meaningful 3 sentence summary. The document simply states "this is test document" without providing any additional details.
El documento proporciona las credenciales de acceso de un usuario de Cisco.com. El nombre de usuario es Edgardnetworking y la contraseña es Ciscodot1x.
El documento presenta instrucciones para crear un cómic digital en la plataforma Pixton.com, incluyendo los pasos para registrarse, ingresar al sitio, crear personajes y escenarios, y publicar el cómic finalizado.
El documento resume los capítulos 1 y 4 del libro Sociología escrito por Light, Keller y Calhoun. El capítulo 1 explica los orígenes de la sociología en los siglos XVIII-XIX y las primeras teorías de pensadores como Marx, Durkheim y Weber. El capítulo 4 define la cultura como los aspectos compartidos por una sociedad, incluyendo creencias, valores, artefactos, lenguaje y conocimiento. Explica que la cultura se divide en material e inmaterial y que una alta integración cultural es común en sociedades desarroll
O documento discute os desafios enfrentados por pessoas com deficiência no acesso à educação e ao mercado de trabalho no Brasil, como a falta de acessibilidade em escolas e a baixa taxa de empregabilidade de deficientes. Também menciona a importância da Lei Brasileira de Inclusão de 2015 para garantir os direitos das pessoas com deficiência.
This document summarizes a multifunction power transducer model TRMT. It can simultaneously detect and display individual phase voltages, currents, power, frequency, and power factor. It has features like user-settable CT and PT ratios, circuit selection, auto/manual scrolling display, RS-485 communication, analog/digital outputs, and DIN rail or wall mounting. The transducer measures voltage and current with 0.2% accuracy and power parameters with 0.5% accuracy. It is available in different voltage and current input ranges with RS-485 or analog/digital output options.
This document contains the syllabus and procedures for experiments in the Electrical Machines I Lab. The experiments focus on obtaining characteristics of DC machines like generators and motors, as well as transformers. Key experiments include open/load characteristics of DC generators and motors, efficiency tests, and open/short circuit tests for transformers. Precautions are outlined and tabular columns provided to record readings and calculate performance parameters like efficiency.
This document contains the syllabus and procedures for experiments in the Electrical Machines I Lab. The experiments focus on obtaining characteristics of DC machines like generators and motors, as well as load tests to determine efficiency. Key experiments include open/load characteristics of DC generators and motors, Swinburne's test on DC shunt motors, and load tests to find efficiency of DC shunt and compound motors. Procedures provide connections, precautions and step-by-step methods for collecting data and analyzing results for each experiment.
This document discusses different types of phase controlled converters including single-phase and three-phase semiconverters, full converters, and dual converters. It provides equations and diagrams to describe the operation and analyze the performance of single-phase semiconverters and full converters with resistive-inductive loads. It also describes the operation of a three-phase half-wave converter with continuous and constant load current.
This document describes the UC1907, UC2907, and UC3907 load share controller ICs. These ICs allow multiple independent power modules to share load current proportionately by controlling each module's power stage based on a common current share bus voltage. Key features include accurate voltage and current sensing and amplification, adjustable current sharing through independent voltage feedback loops, and designation of a master module to ensure current matching within 2.5% across modules. The IC resides on each power module to provide closed-loop voltage control based on the current share bus signal.
Unit-2 Three Phase controlled converter johny renoald
This document discusses three phase controlled rectifiers. It provides equations and diagrams for a three phase half-wave converter with an RL load operating under continuous and constant load current. The average output voltage is derived as one-third the peak phase voltage multiplied by 2/π. Waveforms at different trigger angles are shown. Methods for calculating the maximum, RMS, and normalized average output voltages are also presented.
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
A document about DC choppers is summarized as follows:
1) DC choppers are static devices that provide a variable DC voltage from a constant DC source and are widely used for motor control and regenerative braking. Choppers come in two types - step-down and step-up.
2) In a step-down chopper, the output voltage is less than the input voltage. When the thyristor switch is ON, the supply voltage appears across the load. When it is OFF, the voltage across the load is zero.
3) In a step-up chopper, the output voltage is higher than the input voltage. Energy is stored in an inductor when the chopper is
This document discusses different types of DC-DC converters known as choppers. It describes:
1) Buck and boost choppers, where buck choppers produce output voltages lower than the input, and boost choppers produce outputs higher than the input.
2) The basic operation of choppers which involves turning a switch on and off periodically to connect and disconnect a constant voltage source from the load, allowing variable output voltages.
3) Key circuits for buck, boost, and buck-boost choppers along with explanations of how energy transfer from input to output works during switch on and off periods to achieve different output voltages.
This document provides information on dual comparator integrated circuits from ON Semiconductor, including the LM393, LM393E, LM293, LM2903, LM2903E, LM2903V, and NCV2903. It includes specifications for electrical characteristics like input offset voltage, input bias current, output saturation voltage, and supply current. The document also provides application information with examples of using the comparators in zero crossing detectors, oscillators, time delay generators, and with hysteresis. Diagrams show typical comparator schematics and markings.
The GMX Series is Alpha's line interactive standby power supply designed for cable television and broadband systems. It provides regulated AC power free of spikes, surges, sags and noise, and can compensate for ±30% input voltage variations. Key features include optional DOCSIS or ethernet monitoring, a smart display, programmable battery testing, and replaceable surge protectors. It is available in 120V, 240V, and 240V 50Hz models ranging from 7.8 to 60 pounds.
1. The document discusses DC-DC buck converters and their operation. A buck converter efficiently steps down DC voltage through lossless conversion using a switch, inductor, diode, and capacitor.
2. When the switch is closed, the inductor current rises and energy is stored in the inductor's magnetic field. When the switch opens, the inductor current flows through the diode to the load. By rapidly switching on and off, the output voltage is the average of the input voltage over many switching cycles.
3. Key aspects covered include inductor and capacitor behavior, the input/output voltage relationship, effects of varying duty cycle and switching frequency, and RMS current calculations. Proper component selection is important for continuous
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for similar amplifiers and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741, including input/output ratings, gain, bandwidth, slew rate, and more.
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for previous models and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741 like voltage range, gain, bandwidth, power requirements, and packaging dimensions.
The LM741 series are general purpose operational amplifiers that are direct replacements for popular op amp models. They offer features like overload protection, no latch-up, and stability. The LM741C/E variants have their performance guaranteed over a 0°C to 70°C range instead of -55°C to 125°C. The document provides electrical characteristics for the LM741 models including input offset voltage, bias current, gain, output voltage and current specifications.
The document provides specifications for the UC2842/3/4/5 and UC3842/3/4/5 family of current mode PWM controller ICs. The controllers are optimized for offline and DC-DC converters with features such as low start-up current, automatic feed forward compensation, current limiting, and undervoltage lockout. Key specifications include a switching frequency up to 500kHz, current sense gain of 2.8-3.2V/V, and maximum duty cycles from 0-100% depending on the specific model. Application diagrams show examples of using the ICs in offline flyback converter and DC-DC converter designs.
1.SINGLE PHASE HALF WAVE CONTROLLED CONVERTER WITH RESISTIVEINDUCTIVE LOAD
2 SINGLE PHASE FULLY CONTROLLED CONVERTER WITH RESISTIVEINDUCTIVE LOAD
3 SPEED CONTROL OF 3-PHASE SLIP RING (WOUND ROTOR) INDUCTION MOTOR
4 THYRISTORISED DRIVE FOR DC MOTOR WITH CLOSED LOOP CONTROL
5 THYRISTORISED DRIVE FOR PMDC MOTOR WITH SPEED MEASUREMENT & CLOSED LOOP CONTROL
6 SPEED MEASUREMENT OF PMDC MOTOR WITH CLOSED LOOP CONTROL
7 IGBT USING SINGLE 4 QUADRANT CHOPPER DRIVE FOR PMDC MOTOR WITH SPEED MEASUREMENT AND CLOSED LOOP AND CONTROL
8 SINGLE PHASE CYCLO CONVERTER BASED AC INDUCTION MOTOR CONTROLLER
9 THREE PHASE INPUT THYRISTORISED DRIVE 3HP DC MOTOR WITH CLOSED LOOP CONTROL
10 THREE PHASE INPUT IGBT DRIVE FOR 4 QUADRANT CHOPPER OF 3HP DC MOTOR WITH CLOSED LOOP CONTROL
The TL082 is a dual JFET-input operational amplifier that provides high speed and low noise performance. It has an internally trimmed input offset voltage, low input bias current, wide gain bandwidth of 4 MHz, and high slew rate of 13 V/μs. The TL082 can be used in applications such as high speed integrators, sample and hold circuits, and other circuits requiring fast operation and low noise.
This document provides an overview of single phase fully controlled rectifiers. It begins by explaining the advantages of fully controlled rectifiers over uncontrolled rectifiers, namely the ability to control output voltage/current and allow bidirectional power flow. It then discusses the operation of a single phase fully controlled half-wave rectifier with resistive and resistive-inductive loads. The full bridge configuration is introduced as the most popular topology. Operation in both continuous and discontinuous conduction modes is analyzed for a full bridge supplying an R-L-E load. Key points like conduction periods, voltage waveforms, and the relationship between firing angle and output voltage/current are explained.
Established in the year 2012, We Chronicle Solution are the reputed trader, importer, distributor, wholesaler, supplier of a wide series of Security Products. We are famous in the market for our comprehensive products range that comprises of CCTV Cameras, CCTV Surveillance Systems and CCTVs, CCTV cables & accessories, Spy cameras & devices, Biometrics & VDPs,. In addition to the range of efficient products, we provide reliable and flexible installation services of the presented security equipment. We use quality grade raw materials obtained from our dependable and trusted vendors for manufacturing these products and make user that all the industrial guidelines are followed during and after the production process
Suvidha Services provides commercial and residential cleaning services throughout India. They have been in business since 2002 and serve over 600 customers with specialized cleaning through annual contracts. Their services include mechanized cleaning, carpet and furniture cleaning, pest control, plumbing, and more. They aim to provide high quality services using advanced tools and equipment in order to satisfy customers.
Praful Wahadude founded the SLPL Group of companies in 2000. SLPL Group engages in pharmaceuticals, construction, and tourism businesses. Specifically, SLPL is a pharmaceutical company that manufactures over 350 drug formulations, including active pharmaceutical ingredients and generics. It has a presence across Maharashtra, Madhya Pradesh, and Chhattisgarh, catering to over 21,000 physicians through hospitals, institutes, and nursing homes.
“Magnus Fitness World” counted amidst the renowned firms which are engaged in trading and supplying of quality-assured Gym & Sports Equipment. We are providing a wide range of this fitness equipment which includes Motorized Treadmill, Cross Elliptical Trainer, Exercise Bike, Manual Jogger, Home Gym Equipment, Gym Stepper, Gym Rower, Strength Equipment, Fitness Accessories, Sports Racket and Cardio Sports Watch. All these equipment are sourced from some of the reputed vendors who used ultra-grade components, raw material and tools to manufacture these products.
“Magnus Fitness World” counted amidst the renowned firms which are engaged in trading and supplying of quality-assured Gym & Sports Equipment. We are providing a wide range of this fitness equipment which includes Motorized Treadmill, Cross Elliptical Trainer, Exercise Bike, Manual Jogger, Home Gym Equipment, Gym Stepper, Gym Rower, Strength Equipment, Fitness Accessories, Sports Racket and Cardio Sports Watch. All these equipment are sourced from some of the reputed vendors who used ultra-grade components, raw material and tools to manufacture these products.
The document is a repetitive listing of "IndusTech Corporation" without any other details. It does not contain any substantial information that can be summarized in 3 sentences or less.
Kitchen Basics one stop shop for all your kitchen needs was started by Ms. Kranti Gedam with an aim to provide international quality products at reasonable prices in a somber atmosphere.
"Sujalam Consultants" established in year 1998, as proprietary consultants in the field of groundwater exploration, has now grown in terms of expertise and experience as a multidisciplinary in the field of Environment, Engineering, Geology and Mining etc.
We have successfully completed the Reaccreditation of QCI NABET in Categoery A to carry out Geological and Hydro-geological Studies for various developemental activities like Mining, Thermal Power Plants, Township etc,
Headhunt Management Consultant is a well-known staffing agency in Central India established in 1998. It is managed by experienced professionals and has 4 staff members. The agency receives job requirements from clients, searches its database and conducts preliminary interviews to identify suitable candidates. If a candidate is deemed suitable, their resume is forwarded to the client. If the client is satisfied, the agency will arrange an interview. The agency's main focus is providing candidates for cement plants due to its advisor's experience in the cement industry. It has various large companies as clients and expects clients to provide clear job descriptions to help identify the best candidates.
Industry leading 2 yr Free Replacement warranty
Long life – 5+ years
Completely maintenance free
Heat resistant
Impact resistant
Water resistant
Dust resistant
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
The Trimble M3 total station offers reliable mechanical technology combined with powerful Trimble Access field software. It features a compact, lightweight design and provides long battery life of up to 26 hours. The Trimble Access software includes modules for topographic surveys, staking, control, and road design capabilities like importing alignments and guiding offset staking.
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Established in the year 2011, we, “Mechano”, are engaged in manufacturing and supplying a wide range of Material Handling Equipment and Industrial Machines. The comprehensive range offered by us includes Roller Conveyors, Industrial Belt Conveyors, Belt Conveyors, Hand Trolleys, Bucket Elevators and Horizontal Ribbon Mixers. In addition to this, we offer Paddle Mixers, Sigma Mixers, Detergent Powder Mixers, Vertical Mixers, Nylon Conveyor Belts and Rubber Conveyor Belts.
Established in the year 2011, we, “Mechano”, are engaged in manufacturing and supplying a wide range of Material Handling Equipment and Industrial Machines. The comprehensive range offered by us includes Roller Conveyors, Industrial Belt Conveyors, Belt Conveyors, Hand Trolleys, Bucket Elevators and Horizontal Ribbon Mixers. In addition to this, we offer Paddle Mixers, Sigma Mixers, Detergent Powder Mixers, Vertical Mixers, Nylon Conveyor Belts and Rubber Conveyor Belts.
1. AN ISO 9001:2000 COMPANY
POWER SUPPLY
SINGLE OUTPUT POWER SUPPLY DUAL OUTPUT POWER SUPPLY
MODEL-KM-PS-302AB/303AB/305AB MODEL-KM-PS-302DII/303DII/305DII
KM-PS-303DII
AL OUTPUT
0~30V / 0~3A DU
POWER SUPPLY
REGULRATED DC
03AB
KM-PS-3
R SUPPLY
DC POWE
F E AT U R E S : F E AT U R E S :
— H i g h St a b i l i t y — H i g h St a b i l i t y
— ON/OFF output switch — ON/OFF output switch
— Fixed 3.3V / 5V Supply output — Fixed 5V Supply output
— C o n s t a n t C u r r e n t / C o n s t a n t Vo l t a g e a u t o
— Coarse & fine adjustment setting for both
switch
— Coarse & fine adjustment setting for both Vo l t a g e & C u r r e n t .
Vo l t a g e & C u r r e n t . — Full scale long duration time output.
— Full scale long duration time output.
— 3 d i g i t d i s p l a y f o r e a c h Vo l t a g e & C u r r e n t
— 3 d i g i t d i s p l a y f o r Vo l t a g e & C u r r e n t f u n c t i o n
r e s p e c t i v e l y. function.
S P E C I F I C AT I O N S : S P E C I F I C AT I O N S :
1 ) Va r i a b l e O u t p u t : 1 ) Va r i a b l e O u t p u t :
O u t p u t Vo l t a g e : 0 ~ 30V D u a l O u t p u t Vo l t a g e : 0 ~ 3 0 V
Output Current : Dual Output Current :
0 ~ 2A Model-KM-PS-302AB 0 ~ 2A Model-KM-PS-302DII
0 ~ 3A Model-KM-PS-303AB 0 ~ 3A Model-KM-PS-303DII
0 ~ 5A Model-KM-PS-305AB 0 ~ 5A Model-KM-PS-305DII
Source regulation : ≤ 0.01% + 3mV C o n s t a n t Vo l t a g e St a b i l i t y Vo l t a g e : < 0 . 0 1 % + 2 m V
(0 to nominal value Load : <0.01% + 2mV
Load regulation : ≤ 0.01% + 3mV continuously
variable) R e c o v e r y Ti m e ≤ 100µS
Ripple & Noise : ≤ 1mV (rms) Ripple & Noise ≤ 1 m Vr m s ( e ff i c i e n t v a l u e )
Display error : ≤ 0.5% + 1 digit Te m p e r a t u r e f a c t o r ≤ 3 0 0 p p m / o C
Constant Current Current : <0.2% + 3mA
St a b i l i t y
(0 to nominal value
Load : <0.2% + 3mA
continuously
2) Fixed output variable) Ripple & Noise ≤ 3mA rms
O u t p u t Vo l t a g e : Fixed 5V / 3.3V 2) Fixed output
Output Current : 1A O u t p u t Vo l t a g e : 5 V.
Source regulation : ≤ 5mV Output Current : 2A
Load regulation : ≤ 15mV Source regulation : ≤ 5mV
www.kusam-meco.co.in
Ripple & Noise : ≤ 2mV (rms) Load regulation : ≤ 15mV
Ripple & Noise : ≤ 2mV (rms)
3) Power Supply : 220V ± 10% 3) Power Supply : 220V ± 10%
4) Weight : 5.5kg approx 4) Weight : 10kg approx
5) Dimensions : 240 x 150 x 270mm
5) Dimensions : 120 x 150 x 270mm
2. An ISO 9001:2000 Company
REGULATED DC POWER SUPPLY
SINGLE OUTPUT POWER SUPPLY DUAL OUTPUT POWER SUPPLY
MODEL-KM-PS-302AB/303AB/305AB/ 3010AB MODEL-KM-PS-302DII/303DII/305DII
0 2. 4 0.00 2 8.3 0.00
0
0 2. 9 0.0
F E AT U R E S : F E AT U R E S :
— H i g h St a b i l i t y — H i g h St a b i l i t y
— ON/OFF output switch — ON/OFF output switch
— Fixed 3.3V / 5V Supply output — Fixed 5V Supply output
— C o n s t a n t C u r r e n t / C o n s t a n t Vo l t a g e a u t o
— Coarse & fine adjustment setting for both
switch
— Coarse & fine adjustment setting for both Vo l t a g e & C u r r e n t .
Vo l t a g e & C u r r e n t . — Full scale long duration time output.
— Full scale long duration time output.
— 3 d i g i t d i s p l a y f o r e a c h Vo l t a g e & C u r r e n t
— 3 d i g i t d i s p l a y f o r Vo l t a g e & C u r r e n t f u n c t i o n
r e s p e c t i v e l y. function.
S P E C I F I C AT I O N S : S P E C I F I C AT I O N S :
1 ) Va r i a b l e O u t p u t : 1 ) Va r i a b l e O u t p u t :
O u t p u t Vo l t a g e : 0 ~ 30V D u a l O u t p u t Vo l t a g e : 0 ~ 3 0 V
Output Current : Dual Output Current :
0 ~ 2A Model-KM-PS-302AB 0 ~ 2A Model-KM-PS-302DII
0 ~ 3A Model-KM-PS-303AB 0 ~ 3A Model-KM-PS-303DII
0 ~ 5A Model-KM-PS-305AB 0 ~ 5A Model-KM-PS-305DII
0 ~ 10A Model-KM-PS-3010AB C o n s t a n t Vo l t a g e St a b i l i t y Vo l t a g e : < 0 . 0 1 % + 2 m V
(0 to nominal value Load : <0.01% + 2mV
Source regulation : ≤ 0.01% + 3mV continuously
variable) R e c o v e r y Ti m e ≤ 100µS
Load regulation : ≤ 0.01% + 3mV
Ripple & Noise ≤ 1 m Vr m s ( e ff i c i e n t v a l u e )
Ripple & Noise : ≤ 1mV (rms) Te m p e r a t u r e f a c t o r ≤ 3 0 0 p p m / o C
Display error : ≤ 0.5% + 1 digit Constant Current
St a b i l i t y
Current : <0.2% + 3mA
(0 to nominal value
Load : <0.2% + 3mA
continuously
2) Fixed output variable) Ripple & Noise ≤ 3mA rms
O u t p u t Vo l t a g e : Fixed 5V / 3.3V
Output Current : 1A 2) Fixed output
Source regulation : ≤ 5mV O u t p u t Vo l t a g e : 5 V.
Load regulation : ≤ 15mV Output Current : 2A
Ripple & Noise : ≤ 2mV (rms) Source regulation : ≤ 5mV
Load regulation : ≤ 15mV
3. Power Supply : 220V ± 10% Ripple & Noise : ≤ 2mV (rms)
3. Power Supply : 220V ± 10%
4. Weight : 5.5kg approx
4. Weight : 10kg approx
5. Dimensions : 120 x 150 x 270mm 5. Dimensions : 240 x 150 x 270mm
Note : All Specification are Subject to change.
G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct : 022 - 24156638. Tel.: 022 -2 4124540, 24181649 Fax : 022 - 24149659
An ISO 9001:2000 Company Email : kusam_meco@vsnl.net, Website : www.kusam-meco.co.in, www.kusamelectrical.com