This document is a curriculum vitae for Mehdi Amini that provides details about his personal information, education, experience, professional qualifications, teaching activities, industrial projects, research, and computer skills. It outlines that he has a BS in metallurgy engineering from Najafabad Islamic Azad University and over 10 years of experience in quality control engineering and technical inspection roles. It also lists his extensive experience in welding inspection, non-destructive testing, materials selection, and corrosion inspection/monitoring.
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
1-QA/QC Mechanical engineer
Qualified and Certified in :-
2-Piping Inspector API 570
3-Pressure Vessel inspector API 510
4- Welding Inspector CWI
4- Above Ground Tank inspector API 653
Mechanical Inspector - API 653 - KSA - CV.pdfssuser931ac3
17 years experience in mechanical inspection in different sectors including Oil & Gas Plants, Oil Refineries, Power & Desalination plants, Pipeline Projects, Construction industries.
I worked as API 653 inspector for storage tanks during new construction of tanks according to applicable standards (API 650 & API 620) and in-service inspection of tanks under scope of API 653 Standards.
Conduct pre-inspection meetings in order to understand and establish the quality and inspection requirements as per the applicable codes, standards, specifications and project requirements.
Reviewing of quality plans / ITPs, Process Maps, Work Instructions and inspection documents.
Execute work in accordance with strict compliance of agreed inspection and test plan and to carry out quality inspections accordingly to ensure the integrity and compliance of the item with the requirements of international codes, standards, specifications and customers project specification requirements.
Provide Third party inspection (TPI) services to construction companies, EPC contractors and to various clients in the Oil & Gas and Energy Sector.
Perform QA/QC activities according to related standards and codes.
Conduct on-stream inspection for equipment condition monitoring.
Conducts periodic inspections accordance with pre-established programs and procedures.
Supervises and coordinates NDT crews and Selects appropriate NDT techniques required for condition evaluation and interpret their results to applicable codes.
Review of material certificates as per ASME Sec II and ASTM & inspect stock materials delivered to assurance its compliance.
Witnessing of hydro test, pneumatic test Vacuum box test.
Shop and site inspection involving stage and final inspection, detect, identify, and report non-conformances during the course of the fabrication process.
Inspection of Painting and coating.
In-service inspection of Boilers, Pressure Vessels, Tanks, piping, etc.
FAT for Valves.
Structure Inspection during new construction.
Data gathering for Aramco RBI Projects.
1. Curriculum Vitae(CV)
Mehdi Amini
Personal informations
Date of Birth: 23/08/1980
Gender: Male
Citizenship: Iranian
Civil status: married
Children: 2
Languages
Iranian and English(fluent)
Contact Informations
Faculty of Information Phone: +98 (31) 36689305
Cell phone : +98(0)9131285734
Email: amini.inspection@gmail.com
Address : No.368 , davami st. , emam alley, hezarjarib st. , Esfahan, Iran
Education
BS. In metallurgy engineering(2004)
Najafabad Islamic Azad University , Esfahan , iran
Thesis : assessment of Al-Zn-In sacrificial anode manufacturing process
Advisor: Prof. Mahmood Meratian (Esfahan University Of Technology)
Experience
10 years experience
Position: manager of repair and machinery shop-polyacril company-iran -
isfahan
1- QC engineer : Working since Apr-2005 in QC unit of Merat Poolad
Company(IN ISFAHAN STEEL COMPANY)
2- technical inspector : Working since 2006 up to 2008 in technical
inspection department of POLYACRIL IRAN COMPANY (chemical
–textile industry)
3- Direct manager of central work shop (machinery and construction site)
now in engineering and power plant department of POLYACRIL IRAN
COMPANY since 2008 up to now
2. Professional Experiences
1- Working with technical international code and standards
(ASME Sections ,ASME piping codes, DIN material classification and
numbering system , API (standards, RP , codes), AWWA, NACE,
AWS(standards, codes), TEMA(shell & tube heat exchanger) , SSPC(VIS,
Paint Application , surface preparation standards ) , ASTM(classification and
application scope of ferrous and non ferrous materials), ASM(20 vol. – metals
hand books & special published handbook ), BS
2- Metallic and non metallic Material selection procedure
3- Replacement and equivalent material in accordance with different
standards
4- Assessment of chemical analysis of materials in accordance with
different standards
5- Welding inspection of piping, structure, vessel , storage tank, heat
exchanger, industrial components
6- Preparing WPS & PQR (ASME Sec. IX code) , QC plan and inspection
test plan(ITP)
7- Carry out and Interpretation NDE (PT,MT,UT,RTI, VT,LT)
8- Metallic material inspection before construction process
9- Welding metallurgy analysis
10- Fracture and failure mechanism analysis of industrial component
according to ASM method
11- Material selection and replacement procedure for construction of
industrial components
12- Paint and coating , surface preparation inspection
13- Paint and coating selection procedure
14- Corrosion inspection & monitoring
15- Familiar with Water treatment of boiler
16- Familiar with Water treatment of cooling water treatment
17- Corrosion resistance material selection and corrosion control method
18- Heat treatment procedure of materials for different components
19- Destructive test acceptance criteria assessment as per related codes and
standards
20- Piping inspection – piping material selection, fabrication, inspection and
test, (ASME B31. , API 570)
21- Technical inspection of Storage tank (in service inspection , material
selection ,construction and inspection & test according to API 620,650 ,
653)
22- Technical inspection of pressure vessel (in service , material selection &
construction according to API 510 . ASME sec VIII)
23- Technical inspection of shell and tube heat exchanger(according to
TEMA)
24- Familiar with machinery technology (machinery, milling and grinding)
3. 25- Production procedure preparation for construction of industrial
components
26- Carry out the training course for private and public company from Iran
Technical & Vocational Training Organization
…………………………………………………………………………
CERTIFICATES
1- RTI – ASNT LEVEL II (ASNT : AMERICAN SOCIETY OF NON
DESTRUCTIVE TEST)
2- VT – ASNT LEVEL II
3- MT – ASNT LEVEL II
4- PT - ASNT LEVEL II
5- UT – ASNT LEVEL II (attendance certificate)
6- Welding procedure specification(WPS & PQR)
7- Piping inspection
8- QC of industrial projects
9- Welding inspection(level I)
10- Welding inspection(level II)
…………………………………………………………………………
Teaching Activities as a tutor
1- Lead Tutor : international Technical inspection and QC course :
TUV international Co. (Germany-UK branch ) –10000hr course
conducted
2- Lead Tutor : international Technical inspection engineering course
; G2S international Co. (Italy) – 200hr- engineers participant
3- Welding inspection : profile sepahan company engineers
4- Welding inspection : profile sepahan company technicians
5- WPS & PQR ; welding distorsion control : merat poolad company
engineers
6- WPS & PQR : Isfahan atomic energy Co. engineers
7- Welding inspection : polyacril company
8- NDT : polyacril company
9- Pressure vessel inspection : polyacril company
10- Principal of corrosion and its control method : polyacril company
engineers
11- Key to steel , polyacril company
12- Welding inspection : profile sepahan company
13- Welding inspection : profile sepahan company technicians
14- HF-ERW inspection: profile sepahan company technicians
15- HF-ERW inspection: profile sepahan company engineers
16- Paint and surface preparation: moshaverin sanaat Co. engineers
17- Paint and surface preparation: moshaverin sanaat Co. engineers
18- Paint and surface preparation: moshaverin sanaat Co. engineers
19- Paint and surface preparation: moshaverin sanaat Co. engineers
4. 20- Key to steel : najafabad university : engineer students
21- Technical inspection : najafabad university : engineer students
22- Welding inspection : najafabad university : engineer students
23- Paint and surface preparation –level 1 – POGC company- asallouyeh
24- Paint and surface preparation –level 2 – POGC company- asallouyeh
Industrial project consultation
1- WPS & PQR preparation for API 6” HF-ERW line pipe manufacturing
according to ASME Sec. IX
2- WPS & PQR preparation for API 8” HF-ERW line pipe manufacturing
according to ASME Sec. IX
Top Industrial Research and Activities:
1- Material replacement of for MVV metering pump shafts- 2nd acrylic
plant-polyacril
2- Material replacement of for metering pump TiO2 shafts- polyester plant-
polyacril
3- Material replacement of for morgan pump shafts- acrylic plant-polyacril
company
4- Material selection for reconstruction of gear accessories of gas turbine-
power plant –polyacril
5- Failure analysis of NO. 1 , 2 boiler tubes-metallurgical assessment -
Power plant – polyacril
6- Material Selection of NO. 1 , 2 boiler tubes - Power plant – polyacril
7- Technical Inspection welding & PWHT process of NO. 1 , 2 boiler
tubes - Power plant – polyacril
8- Welding procedure for repair of hundreds valves - polyacril company
9- Welding procedure for several pumps casing- polyacril company
10- Material selection of all components drawing- 2nd acrylic plant-
polyacril
11- Material replacement for reconstruction of different components –
polyacril
12- Material replacement of acrylic fiber steam drier tubes - acrylic 2 plant-
polyacril
13- Material selection of solid burner body (high temp. –corrosion service)-
polyacril
14- Assessment of cavitation - erosion in centrifugal cooling tower pumps-
acrylic2 plant- polyacril
15- Cathodic protection monitoring of undergroung pipeline - polyacril
5. Computer skills
1- Microsoft office familiar (especially word , power point)
2- Professional skill in Internet scientific searching
Language level
1- Fluent in English (writing, speaking, understanding, reading ;English
diploma certified in iran language institute for 550 hr training course)
Mehdi amini
Yours sincerely