This document is a curriculum vitae for Mehdi Amini that provides details about his personal information, education, experience, professional qualifications, teaching activities, industrial projects, research, and computer skills. It outlines that he has a BS in metallurgy engineering from Najafabad Islamic Azad University and over 10 years of experience in quality control engineering and technical inspection roles. It also lists his extensive experience in welding inspection, non-destructive testing, materials selection, and corrosion inspection/monitoring.
Osman Owis Abbas Agamy is seeking a position as a QA/QC engineer with over 12 years of experience in inspection, welding, and painting. He holds qualifications in NDT, welding engineering, quality management, and metallurgy. His experience includes roles as a quality control inspector, welding engineer, and current role as QC manager where he is responsible for quality assurance activities including inspection, testing, and ensuring compliance with codes and standards. He has worked on projects in various industries such as cement, power, and oil and gas.
The document is a cover letter and resume submitted by Hazem Ouda for a position in quality control and welding engineering. Some key points:
- Hazem has over 15 years of experience in quality control, welding inspection, and steel structure engineering for oil/gas, industrial plants, and construction projects.
- He holds several professional certifications in welding inspection, non-destructive testing, and has managed quality control for large industrial projects in Saudi Arabia and Jordan.
- Hazem's resume details his educational background and outlines his work experience on prominent projects in the Middle East, including roles with supervision and engineering firms.
- In the cover letter, Hazem emphasizes his skills and experience that would be
This curriculum vitae is for Mr. Komkrit Choompol, who has over 14 years of experience in quality assurance, quality control, and welding inspection roles for oil and gas and mining projects. He has extensive experience ensuring fabrication, construction, and erection works comply with contracts, specifications, codes and standards. He is proficient in welding codes like ASME, AWS, API and inspection techniques like ultrasonic testing, radiographic testing, and has qualifications like CSWIP and ASNT Level II.
Mamdouh El Azab is a mechanical engineer from Egypt with over 10 years of experience in pipe installation and steel structure projects. He has worked on water, oil, and gas pipeline networks in Saudi Arabia and Egypt. Currently, he works as a mechanical construction engineer in Saudi Arabia, overseeing the installation of pipes up to 1200mm in diameter. He has experience managing teams and ensuring projects are completed safely, on schedule, and within budget.
Asad Ahsan is a Lead QA/QC Inspector with over 10 years of experience in mechanical and welding inspection. He has extensive experience inspecting welding, piping, and tanks for large power and industrial projects in Saudi Arabia. He is certified in welding inspection and NDT testing. His responsibilities include qualifying welders, performing visual and dimensional inspections, ensuring quality standards are met, and generating inspection reports. He is proficient in English, Arabic, Urdu, and Hindi.
M. Suresh is an NDT technician with over 7 years of experience in ultrasonic testing, magnetic particle testing, eddy current testing, and radiographic testing. He has worked abroad in Saudi Arabia since 2014 and has experience inspecting various industrial components like boilers, pipes, pressure vessels, and heavy machinery. He holds an ASNT Level II certification and PCN Level II certification in various NDT methods.
Sirous Hassani has over 25 years of experience in engineering, project management, inspection, and quality control in the steel and automotive industries in Iran. He has managed numerous projects involving steel production facilities, including direct reduction plants, steel making areas, and rolling mills. Currently he is the Project and Inspection Department Manager at S.B.R International Engineering EPC Co., managing the inspection and manufacturing of the Saba Steel expansion project in Esfahan, Iran. He holds an MSc in Metallurgy Engineering and has extensive training in welding, quality management systems, and non-destructive testing.
This document is a curriculum vitae for Mehdi Amini that provides details about his personal information, education, experience, professional qualifications, teaching activities, industrial projects, research, and computer skills. It outlines that he has a BS in metallurgy engineering from Najafabad Islamic Azad University and over 10 years of experience in quality control engineering and technical inspection roles. It also lists his extensive experience in welding inspection, non-destructive testing, materials selection, and corrosion inspection/monitoring.
Osman Owis Abbas Agamy is seeking a position as a QA/QC engineer with over 12 years of experience in inspection, welding, and painting. He holds qualifications in NDT, welding engineering, quality management, and metallurgy. His experience includes roles as a quality control inspector, welding engineer, and current role as QC manager where he is responsible for quality assurance activities including inspection, testing, and ensuring compliance with codes and standards. He has worked on projects in various industries such as cement, power, and oil and gas.
The document is a cover letter and resume submitted by Hazem Ouda for a position in quality control and welding engineering. Some key points:
- Hazem has over 15 years of experience in quality control, welding inspection, and steel structure engineering for oil/gas, industrial plants, and construction projects.
- He holds several professional certifications in welding inspection, non-destructive testing, and has managed quality control for large industrial projects in Saudi Arabia and Jordan.
- Hazem's resume details his educational background and outlines his work experience on prominent projects in the Middle East, including roles with supervision and engineering firms.
- In the cover letter, Hazem emphasizes his skills and experience that would be
This curriculum vitae is for Mr. Komkrit Choompol, who has over 14 years of experience in quality assurance, quality control, and welding inspection roles for oil and gas and mining projects. He has extensive experience ensuring fabrication, construction, and erection works comply with contracts, specifications, codes and standards. He is proficient in welding codes like ASME, AWS, API and inspection techniques like ultrasonic testing, radiographic testing, and has qualifications like CSWIP and ASNT Level II.
Mamdouh El Azab is a mechanical engineer from Egypt with over 10 years of experience in pipe installation and steel structure projects. He has worked on water, oil, and gas pipeline networks in Saudi Arabia and Egypt. Currently, he works as a mechanical construction engineer in Saudi Arabia, overseeing the installation of pipes up to 1200mm in diameter. He has experience managing teams and ensuring projects are completed safely, on schedule, and within budget.
Asad Ahsan is a Lead QA/QC Inspector with over 10 years of experience in mechanical and welding inspection. He has extensive experience inspecting welding, piping, and tanks for large power and industrial projects in Saudi Arabia. He is certified in welding inspection and NDT testing. His responsibilities include qualifying welders, performing visual and dimensional inspections, ensuring quality standards are met, and generating inspection reports. He is proficient in English, Arabic, Urdu, and Hindi.
M. Suresh is an NDT technician with over 7 years of experience in ultrasonic testing, magnetic particle testing, eddy current testing, and radiographic testing. He has worked abroad in Saudi Arabia since 2014 and has experience inspecting various industrial components like boilers, pipes, pressure vessels, and heavy machinery. He holds an ASNT Level II certification and PCN Level II certification in various NDT methods.
Sirous Hassani has over 25 years of experience in engineering, project management, inspection, and quality control in the steel and automotive industries in Iran. He has managed numerous projects involving steel production facilities, including direct reduction plants, steel making areas, and rolling mills. Currently he is the Project and Inspection Department Manager at S.B.R International Engineering EPC Co., managing the inspection and manufacturing of the Saba Steel expansion project in Esfahan, Iran. He holds an MSc in Metallurgy Engineering and has extensive training in welding, quality management systems, and non-destructive testing.
This document provides information about the Certified QA/QC Engineer - Mechanical certification course offered by Sanjary Educational Academy. The 20 day course trains mechanical engineers on quality assurance and quality control processes based on international standards. It covers roles and responsibilities of QA/QC engineers, quality management systems, inspection plans, and quality documentation. Upon successful completion of the course and exam, students receive a certificate, mark sheet, and qualification card. Sanjary Educational Academy has trained over 5,000 engineers in India and abroad since 2002.
This quality assurance plan outlines the procedures for fabricating and inspecting pipes at a shop for a client's project. It describes 11 manufacturing stages including receiving raw materials, welding, gauging, leakage testing, dimensional checks, and certification. Control checks and reference documents are provided for each stage, along with the manner of recording inspections. The plan aims to ensure pipes are manufactured according to specifications.
Muhammed Anas is seeking a challenging position utilizing his 5+ years of experience in quality control engineering and mechanical supervision. He has worked on several major projects for clients in Saudi Arabia and Qatar, including inspecting materials, coatings, welding, and testing for a phosphate project in Saudi Arabia. He also supervised maintenance activities like compressor overhauls in Qatar. Anas holds a B.E. in Mechanical Engineering and additional qualifications in pipeline engineering, QA/QC, and NDT testing.
This document contains the resume of Sudhansu Bhusan Mohapatra, seeking a position in refinery asset integrity studies, corrosion studies, and material failure analysis. It summarizes his 25+ years of experience in inspection engineering, corrosion monitoring, failure analysis, and condition monitoring of static equipment in refineries. It also lists his educational background and professional certifications.
This document is a CV for Qaiser Reza, an Indian national applying for the position of QA/QC Engineer with over 8 years of experience in mechanical and coating work in the oil and gas industry. The CV provides details of his education, qualifications, languages, core competencies including experience inspecting tanks, piping, welding and coatings. It also lists his previous work experience with companies in Kuwait and India and describes his responsibilities and involvement in quality control, inspection, and health and safety activities on various projects.
The document discusses quality control requirements for various construction materials including aggregates, cement, water, admixtures and reinforcement steel. It outlines testing frequency and standards for each material to ensure quality. Key aspects covered include pre-qualification of suppliers, material certification, sampling, storage procedures, and testing of physical and chemical properties at regular intervals.
This resume summarizes P.Raja Sekaran's professional experience and qualifications. He has over 15 years of experience in quality control and inspection roles in India, Oman, Saudi Arabia, and Qatar. His areas of expertise include welding inspection, NDT, pressure testing, and ensuring compliance with international codes and standards like ASME and API. His most recent role is as a Mechanical Inspector for Applus Velosi Oman, where he performs inspection for various oil and gas projects in accordance with applicable codes and standards.
This document provides information about a 20-day certification course for Certified QA/QC Engineer - Civil offered by Sanjary Educational Academy. The course aims to systematically develop skills and knowledge of QA/QC engineers according to international standards. It covers quality requirements for various industries and provides training on roles and responsibilities of QA/QC engineers, international codes and standards, construction processes, inspection plans, and quality documentation. Upon successful completion of the course and examination, students will be awarded a certificate, mark sheet, and qualification card.
This resume summarizes the qualifications and experience of B.M. Rajkumar, an Indian citizen seeking a position utilizing over 10 years of experience in quality assurance and welding inspection. He holds multiple professional certifications and has worked in roles of increasing responsibility for companies in India and Saudi Arabia. His experience includes developing welding procedures, inspecting welds, training welders, and ensuring compliance with various international and Indian standards for industries including wind energy, construction, and pressure vessels. He has extensive knowledge of welding and fabrication standards and seeks a challenging position where he can further contribute to a company's growth.
This document contains personal and educational details as well as work experience for an individual named Davood Khademi. It includes information such as his degrees in Metallurgy Technology Engineering and Industrial Metallurgy. It lists his work experience in positions like a sales advisor, supervisor, and quality control and shift inspector. It also outlines his skills such as familiarity with welding standards, mechanical testing, metallography, and non-destructive testing. Finally, it provides a table of his training courses covering topics like metallurgy, statistics, and calibration.
The applicant is an Egyptian engineer seeking a job opportunity. He has experience maintaining marine and diesel engines from his previous work and military service. Currently he works as a laboratory engineer responsible for quality control and inspection according to industry standards. He has qualifications in non-destructive testing methods and seeks to further his career experience.
This document provides a summary of Mohamed Ahmed Ibrahim Dawoud's qualifications and professional experience. It lists his personal details, education and training history, computer skills, and work experience from 2005 to the present in quality assurance and quality control engineering roles on various pipeline, plant, and infrastructure projects in Egypt. His responsibilities have included welding inspection, non-destructive testing, materials control, and performing QA/QC activities.
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
The document provides details about an internship report submitted by Raminshah Muhammed at Peekay Steel Castings Pvt Ltd located in Calicut, Kerala, India. Peekay Steel Castings manufactures steel castings for industries such as power, oil and gas, mining, and transportation. Key departments involved in the casting process include methods and development, pattern shop, moulding, melting, heat treatment, fettling, machine shop, quality control, and quality assurance. The internship focused on studying non-destructive testing techniques such as magnetic particle inspection, ultrasonic testing, radiographic testing, and dye penetrant inspection used to detect casting defects at Peekay Steel Castings.
Anandam Mukhopadhyay is seeking a challenging role in welding, fabrication, and quality control with over 10 years of experience. He has expertise in structural fabrication and is familiar with various welding standards and codes. He has experience conducting welder qualifications tests, non-destructive testing, and preparing welding procedure specifications and quality assurance plans. His most recent role was as a welding engineer and quality control engineer with Sanfield India Limited where he inspected structural fabrication and welding.
This document is a resume for Vipin Kumar Rai summarizing his qualifications and experience as a QA/QC Mechanical Engineer. It outlines his contact information, objective, academic and professional qualifications including an Associate AWS Welding Inspector certification and Level II NDT certifications. It describes his job responsibilities including preparing quality plans and documentation. It provides details of his work experience in fabrication, construction, and projects in power plants, pipelines, and steel structures. It lists his technical skills in design software, operating systems, and field work in welding, NDT, and piping inspections.
Established in year 1992, Leveraging on the vast experience of the industry, “Corfact Engineers” are instrumental in manufacturing, exporting, supplying, service providing premium quality Electroplating & Pollution Control Equipment & Tanks. All these products are developed at our sophisticated manufacturing unit by using latest technology and premium quality components & material sourced from the authentic vendors of the industry. Our professionals make sure that all these products are manufactured in compliance with the norms and standards already laid by the industry.
Omar Ibrahim Ayesh - Competency Demonstrationomar ayeah
Omar Ibrahim Ayesh completed a competency demonstration report for his industrial engineering project analyzing operations at Royal Jordanian's air cargo warehouse. As part of his university degree, he assessed the warehouse's export area operations and labor performance. He created flow charts of import and export processes. Through interviews, observations and data collection, he analyzed each export area job duty and created charts to assess one operator's performance over two weeks. His analysis found the operator's utilization was usually within limits, helping to identify if the workforce was appropriately sized to meet operations needs.
Ahmed Bassuony Abd El Aziz El Trawy is seeking a challenging position where he can apply his experience in marine engineering. He obtained a Bachelor of Science in Mechanical Engineering with a focus on Marine Engineering and Naval Architecture from Alexandria University in 2010. Since 2014, he has worked in shipbuilding and repair in Saudi Arabia, holding positions in project coordination, management, and estimation. He is proficient in various computer programs, languages, and technical skills relevant to marine engineering.
Adeel Omer is a QC Welding Inspector with over 10 years of experience. He has worked on major power plant and industrial projects in Saudi Arabia and Pakistan. He is responsible for welding inspections, qualifications, and ensuring work is done according to codes and standards such as ASME and AWS. He is certified in welding inspection and non-destructive testing methods.
Ahmed Lepda has over 8 years of experience as a senior welding engineer working on structural steel fabrication and industrial coating projects in Egypt. He currently works at Shotmed Engineering Co. and has worked on numerous large projects including power plants, chemical plants, and the Grand Egyptian Museum. His responsibilities include checking welding procedures, monitoring welder qualifications, ensuring quality control standards are met, and coordinating with clients and third-party inspectors. He has extensive technical certifications and skills in welding inspection, non-destructive testing, quality management, and engineering software.
This document provides information about the Certified QA/QC Engineer - Mechanical certification course offered by Sanjary Educational Academy. The 20 day course trains mechanical engineers on quality assurance and quality control processes based on international standards. It covers roles and responsibilities of QA/QC engineers, quality management systems, inspection plans, and quality documentation. Upon successful completion of the course and exam, students receive a certificate, mark sheet, and qualification card. Sanjary Educational Academy has trained over 5,000 engineers in India and abroad since 2002.
This quality assurance plan outlines the procedures for fabricating and inspecting pipes at a shop for a client's project. It describes 11 manufacturing stages including receiving raw materials, welding, gauging, leakage testing, dimensional checks, and certification. Control checks and reference documents are provided for each stage, along with the manner of recording inspections. The plan aims to ensure pipes are manufactured according to specifications.
Muhammed Anas is seeking a challenging position utilizing his 5+ years of experience in quality control engineering and mechanical supervision. He has worked on several major projects for clients in Saudi Arabia and Qatar, including inspecting materials, coatings, welding, and testing for a phosphate project in Saudi Arabia. He also supervised maintenance activities like compressor overhauls in Qatar. Anas holds a B.E. in Mechanical Engineering and additional qualifications in pipeline engineering, QA/QC, and NDT testing.
This document contains the resume of Sudhansu Bhusan Mohapatra, seeking a position in refinery asset integrity studies, corrosion studies, and material failure analysis. It summarizes his 25+ years of experience in inspection engineering, corrosion monitoring, failure analysis, and condition monitoring of static equipment in refineries. It also lists his educational background and professional certifications.
This document is a CV for Qaiser Reza, an Indian national applying for the position of QA/QC Engineer with over 8 years of experience in mechanical and coating work in the oil and gas industry. The CV provides details of his education, qualifications, languages, core competencies including experience inspecting tanks, piping, welding and coatings. It also lists his previous work experience with companies in Kuwait and India and describes his responsibilities and involvement in quality control, inspection, and health and safety activities on various projects.
The document discusses quality control requirements for various construction materials including aggregates, cement, water, admixtures and reinforcement steel. It outlines testing frequency and standards for each material to ensure quality. Key aspects covered include pre-qualification of suppliers, material certification, sampling, storage procedures, and testing of physical and chemical properties at regular intervals.
This resume summarizes P.Raja Sekaran's professional experience and qualifications. He has over 15 years of experience in quality control and inspection roles in India, Oman, Saudi Arabia, and Qatar. His areas of expertise include welding inspection, NDT, pressure testing, and ensuring compliance with international codes and standards like ASME and API. His most recent role is as a Mechanical Inspector for Applus Velosi Oman, where he performs inspection for various oil and gas projects in accordance with applicable codes and standards.
This document provides information about a 20-day certification course for Certified QA/QC Engineer - Civil offered by Sanjary Educational Academy. The course aims to systematically develop skills and knowledge of QA/QC engineers according to international standards. It covers quality requirements for various industries and provides training on roles and responsibilities of QA/QC engineers, international codes and standards, construction processes, inspection plans, and quality documentation. Upon successful completion of the course and examination, students will be awarded a certificate, mark sheet, and qualification card.
This resume summarizes the qualifications and experience of B.M. Rajkumar, an Indian citizen seeking a position utilizing over 10 years of experience in quality assurance and welding inspection. He holds multiple professional certifications and has worked in roles of increasing responsibility for companies in India and Saudi Arabia. His experience includes developing welding procedures, inspecting welds, training welders, and ensuring compliance with various international and Indian standards for industries including wind energy, construction, and pressure vessels. He has extensive knowledge of welding and fabrication standards and seeks a challenging position where he can further contribute to a company's growth.
This document contains personal and educational details as well as work experience for an individual named Davood Khademi. It includes information such as his degrees in Metallurgy Technology Engineering and Industrial Metallurgy. It lists his work experience in positions like a sales advisor, supervisor, and quality control and shift inspector. It also outlines his skills such as familiarity with welding standards, mechanical testing, metallography, and non-destructive testing. Finally, it provides a table of his training courses covering topics like metallurgy, statistics, and calibration.
The applicant is an Egyptian engineer seeking a job opportunity. He has experience maintaining marine and diesel engines from his previous work and military service. Currently he works as a laboratory engineer responsible for quality control and inspection according to industry standards. He has qualifications in non-destructive testing methods and seeks to further his career experience.
This document provides a summary of Mohamed Ahmed Ibrahim Dawoud's qualifications and professional experience. It lists his personal details, education and training history, computer skills, and work experience from 2005 to the present in quality assurance and quality control engineering roles on various pipeline, plant, and infrastructure projects in Egypt. His responsibilities have included welding inspection, non-destructive testing, materials control, and performing QA/QC activities.
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
The document provides details about an internship report submitted by Raminshah Muhammed at Peekay Steel Castings Pvt Ltd located in Calicut, Kerala, India. Peekay Steel Castings manufactures steel castings for industries such as power, oil and gas, mining, and transportation. Key departments involved in the casting process include methods and development, pattern shop, moulding, melting, heat treatment, fettling, machine shop, quality control, and quality assurance. The internship focused on studying non-destructive testing techniques such as magnetic particle inspection, ultrasonic testing, radiographic testing, and dye penetrant inspection used to detect casting defects at Peekay Steel Castings.
Anandam Mukhopadhyay is seeking a challenging role in welding, fabrication, and quality control with over 10 years of experience. He has expertise in structural fabrication and is familiar with various welding standards and codes. He has experience conducting welder qualifications tests, non-destructive testing, and preparing welding procedure specifications and quality assurance plans. His most recent role was as a welding engineer and quality control engineer with Sanfield India Limited where he inspected structural fabrication and welding.
This document is a resume for Vipin Kumar Rai summarizing his qualifications and experience as a QA/QC Mechanical Engineer. It outlines his contact information, objective, academic and professional qualifications including an Associate AWS Welding Inspector certification and Level II NDT certifications. It describes his job responsibilities including preparing quality plans and documentation. It provides details of his work experience in fabrication, construction, and projects in power plants, pipelines, and steel structures. It lists his technical skills in design software, operating systems, and field work in welding, NDT, and piping inspections.
Established in year 1992, Leveraging on the vast experience of the industry, “Corfact Engineers” are instrumental in manufacturing, exporting, supplying, service providing premium quality Electroplating & Pollution Control Equipment & Tanks. All these products are developed at our sophisticated manufacturing unit by using latest technology and premium quality components & material sourced from the authentic vendors of the industry. Our professionals make sure that all these products are manufactured in compliance with the norms and standards already laid by the industry.
Omar Ibrahim Ayesh - Competency Demonstrationomar ayeah
Omar Ibrahim Ayesh completed a competency demonstration report for his industrial engineering project analyzing operations at Royal Jordanian's air cargo warehouse. As part of his university degree, he assessed the warehouse's export area operations and labor performance. He created flow charts of import and export processes. Through interviews, observations and data collection, he analyzed each export area job duty and created charts to assess one operator's performance over two weeks. His analysis found the operator's utilization was usually within limits, helping to identify if the workforce was appropriately sized to meet operations needs.
Ahmed Bassuony Abd El Aziz El Trawy is seeking a challenging position where he can apply his experience in marine engineering. He obtained a Bachelor of Science in Mechanical Engineering with a focus on Marine Engineering and Naval Architecture from Alexandria University in 2010. Since 2014, he has worked in shipbuilding and repair in Saudi Arabia, holding positions in project coordination, management, and estimation. He is proficient in various computer programs, languages, and technical skills relevant to marine engineering.
Adeel Omer is a QC Welding Inspector with over 10 years of experience. He has worked on major power plant and industrial projects in Saudi Arabia and Pakistan. He is responsible for welding inspections, qualifications, and ensuring work is done according to codes and standards such as ASME and AWS. He is certified in welding inspection and non-destructive testing methods.
Ahmed Lepda has over 8 years of experience as a senior welding engineer working on structural steel fabrication and industrial coating projects in Egypt. He currently works at Shotmed Engineering Co. and has worked on numerous large projects including power plants, chemical plants, and the Grand Egyptian Museum. His responsibilities include checking welding procedures, monitoring welder qualifications, ensuring quality control standards are met, and coordinating with clients and third-party inspectors. He has extensive technical certifications and skills in welding inspection, non-destructive testing, quality management, and engineering software.
Resume of QA QC-Welding Engineer with 5+ years of expVijay Raghavan
This resume is for S. Vijaya Raghavan, a mechanical engineering professional with over 5 years of experience in inspection roles. He has worked as a QA/QC engineer for several companies involved in manufacturing equipment for the oil and gas industries. He has extensive experience inspecting welding, materials, and completed equipment to verify compliance with standards like ASME, TEMA, and ISO. He also has technical certifications in areas like pressure vessel inspection, piping inspection, welding inspection, and lead auditing. The resume lists his responsibilities and qualifications in detail and provides examples of projects he has worked on involving various types of pressure vessels, heat exchangers, and other oil and gas equipment.
This document provides information about Mohamed Abdelgwad Saied including his personal details, education, qualifications, skills, and 10 years of work experience in inspection, welding, and QA/QC engineering for oil, gas, and petrochemical companies. It details his roles and responsibilities in various projects for companies like DNV GL, Qatar Petroleum, Qatar Petrochemical Company, ThyssenKrupp Industrial Solutions, Inspecta International, and others.
Elsayed Mohamed Amer Khamees is an Egyptian quality engineer with over 8 years of experience in construction projects for oil/gas storage facilities. He has worked on both onshore and offshore projects involving piping systems, tanks, pressure vessels, and pipelines. His responsibilities included preparing quality documents, verifying quality systems, inspecting welding, qualifying welding procedures, interpreting non-destructive testing results, and ensuring work met standards and client specifications. He holds certifications in ultrasonic testing, radiographic testing, dye penetrant testing, and magnetic particle testing from ASNT.
R. Krishnaraj has over 11 years of experience in QA/QC inspection for construction projects related to oil, gas, and petrochemical facilities. He has worked on projects in India and the Middle East for companies such as Leighton Contractors, Lamprell Energy Ltd, McConnell Dowell LLC, and United Industries Services Co LLC. He has expertise in welding inspection, NDT techniques, hydrotesting, and ensuring work is done according to construction codes and standards. Krishnaraj holds an academic diploma in mechanical engineering along with welding and NDT certifications.
This document contains personal and employment information for an Egyptian national. It includes details such as date of birth, education history, qualifications, language and computer skills, and employment history. For employment, it describes positions as a QC inspector and engineer from 2007 to the present, providing inspection and quality control services for various manufacturing and industrial companies in Egypt. Responsibilities included materials testing, inspection, documentation, and ensuring standards compliance. The current role is as a QC engineer for a boiler manufacturing company, involving installation, maintenance, and quality control of boilers, tanks, and other industrial equipment.
Muhammad Asfar is a QA/QC inspector and mechanical engineer with over 10 years of experience in fabrication, inspection, and testing of steel structures, tanks, pipes, and other projects. He is currently employed as a QA/QC inspector at S.Zia-Ul-Haq & Sons, where he conducts inspections and testing during all stages of manufacturing and prepares detailed reports. Asfar is seeking new opportunities as a QA/QC inspector or related role where he can apply his expertise in inspection, welding evaluation, and ensuring quality standards.
Hussien Nasr Eldin Hussien is seeking a position as a QA/QC Mechanical Inspector/Engineer. He has over 12 years of experience in inspection roles for the petroleum industry. He holds certifications including API 570, API 510, API 580 and is a Certified Welding Inspector. In his resume, he provides details of his education, qualifications, codes and specifications knowledge, experience in various roles, computer skills and languages spoken to support his application.
Mohamed Saleh Arafat is a mechanical/welding engineer with over 4 years of experience in welding inspection and non-destructive testing. He has worked as a welding inspector and trainer in Saudi Arabia. He holds several welding and NDT certifications and is familiar with various welding and inspection standards. He has a bachelor's degree in engineering from Al-Azhar University in Egypt.
This document provides a summary of Santhosh Kumar B's qualifications and work experience. He has over 20 years of experience in welding inspection, training, and quality assurance. Some of his roles include welding lecturer and examiner at TWI India Pvt Ltd, manager of mechanical inspection at NCC Ltd, and surveyor of quality services at Tata Projects Ltd. He has extensive experience inspecting welded structures, pipes, pressure vessels, and other fabricated equipment in accordance with international codes and standards.
This document is a curriculum vitae for Saad Mohamed Gad Ibrahim Alawady that outlines his professional experience and qualifications. It summarizes that he has over 15 years of experience in non-destructive testing including visual, ultrasonic, penetrant, magnetic, radiographic, and hydrostatic testing according to various standards. His current role is as a Senior QA&QC Engineer for Apache - KHALDA Petroleum company, where he oversees inspection, testing, and quality control activities to ensure compliance with standards.
Ahmed Ismail (Sr. Welding & Piping) LASTAhmed Esmail
This document contains the resume of Ahmed Mohammed Ismail, outlining his qualifications and work experience as a QA/QC inspector specializing in welding, piping, and non-destructive testing. Over 12 years he has worked on numerous projects in Gulf and Egypt, performing inspections and non-destructive testing including radiography, ultrasonics, magnetic particles, and dye penetrant. His qualifications include ASNT and CSWIP certifications. Currently he works as a Mechanical QA/QC Supervisor on the Haramain High Speed Rail project in Saudi Arabia.
Saji Muraleedharan has over 11 years of experience as a QC Supervisor for piping and welding projects. He has extensive experience inspecting materials and welds according to international codes and standards like ASME and B31.3. Some of the key projects he has worked on include projects in the UAE, Saudi Arabia, Iraq, and Australia. He is skilled in welding procedures, qualifications, non-destructive testing, and mechanical completion inspections.
Mechanical Inspector - API 653 - KSA - CV.pdfssuser931ac3
17 years experience in mechanical inspection in different sectors including Oil & Gas Plants, Oil Refineries, Power & Desalination plants, Pipeline Projects, Construction industries.
I worked as API 653 inspector for storage tanks during new construction of tanks according to applicable standards (API 650 & API 620) and in-service inspection of tanks under scope of API 653 Standards.
Conduct pre-inspection meetings in order to understand and establish the quality and inspection requirements as per the applicable codes, standards, specifications and project requirements.
Reviewing of quality plans / ITPs, Process Maps, Work Instructions and inspection documents.
Execute work in accordance with strict compliance of agreed inspection and test plan and to carry out quality inspections accordingly to ensure the integrity and compliance of the item with the requirements of international codes, standards, specifications and customers project specification requirements.
Provide Third party inspection (TPI) services to construction companies, EPC contractors and to various clients in the Oil & Gas and Energy Sector.
Perform QA/QC activities according to related standards and codes.
Conduct on-stream inspection for equipment condition monitoring.
Conducts periodic inspections accordance with pre-established programs and procedures.
Supervises and coordinates NDT crews and Selects appropriate NDT techniques required for condition evaluation and interpret their results to applicable codes.
Review of material certificates as per ASME Sec II and ASTM & inspect stock materials delivered to assurance its compliance.
Witnessing of hydro test, pneumatic test Vacuum box test.
Shop and site inspection involving stage and final inspection, detect, identify, and report non-conformances during the course of the fabrication process.
Inspection of Painting and coating.
In-service inspection of Boilers, Pressure Vessels, Tanks, piping, etc.
FAT for Valves.
Structure Inspection during new construction.
Data gathering for Aramco RBI Projects.
Dr. Mahmoud Abd El-Rahman is a highly qualified QA/QC and welding engineer with 17 years of experience in welding inspection, quality control, and quality assurance for fabrication projects. He has a PhD in Metallurgical Engineering from Cairo University and is certified in welding inspection, ASME stamping, and ISO standards. Currently he works as the QC Manager for Projects Services Company, overseeing quality programs, certifications, tenders, and fabrication projects in various industrial sectors.
T.Paramarthalingom provides a curriculum vitae summarizing his qualifications and experience as a QA/QC inspector specializing in mechanical engineering projects. He has over 15 years of experience in inspection roles in Singapore and holds relevant technical certifications. His background includes inspecting piping, structural work, and equipment installation for offshore rigs, power plants, and other industrial facilities.
The document is a curriculum vitae for Prasath.V.R that includes the following information in 3 sentences:
Prasath has over 10 years of experience as an inspection engineer, with certifications in welding inspection, pressure vessel inspection, NDT testing, and safety. He has worked on shutdown and turnaround projects in Singapore, Saudi Arabia, India, and Myanmar for companies in the oil, gas, and petrochemical industries. The CV lists his responsibilities as an inspection engineer, which include performing inspections, reviewing inspection reports, identifying defects, and ensuring repairs meet integrity standards.
Venkatraman has over 30 years of experience in welding engineering, inspection, and quality control. He has worked on various projects in industries like offshore drilling, refineries, and shipbuilding. His skills include welding inspection, NDT, dimensional control, and establishing quality systems. Currently he works as a client project engineer overseeing construction and QA/QC activities for offshore rig projects.
This document is a resume for Vinod P Menon. It summarizes his experience as a Technical Services Manager and Senior Metallurgy Engineer specializing in failure investigation, corrosion testing, project management, and materials testing. Over his 10+ year career, he has managed major industrial projects and provided technical consulting services to oil, gas, and manufacturing clients. He holds an engineering degree and API certification, and has extensive experience in metallurgical analysis, non-destructive testing, and defining quality procedures.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
1. 1
CURRICULUM VITAE (CV)
Mehdi Amini
Fix Mechanical Refinery ,Chemical & petrochemical Plant Inspector
Personal Information
Date of Birth: 23/08/1980
Nationality: Iranian
Status: Married
Cell phone:+98(0)9131285734
Email: amini.inspection@gmail.com
Language(s) known : Persian and English
Good in English
Academic Education
B.S Metallurgy Engineering(2004)
Najafabad Islamic Azad University , Esfahan ,Iran
B.S Thesis: Assessment of Al-Zn-In sacrificial anode manufacturing process
Advisor: Prof. Mahmood Meratian (Esfahan University Of Technology)
15 years experience
Fix Mechanical equipments In Service inspector
Summary of Professional Experiences
Knowledge on In service & Construction inspection:
1. Plant shut down inspection & Turn around inspection
2. maintenance inspection during normal operation
3. Ability to prepare and deliver presentations to potential Clients.
4. Good report writing skills and ability to debate technical issues and provide solutions
5. Planning, Organizing & system development skill to stream line the workflow.
6. CMMS work order
7. Knowledge on new construction codes & STD:
ASME Sec. II Part A,B,C,D, Sec.V , VIII Div. 1 & Sec.IX , TEMA , ,API 1104, ASME B31.3, ASME B36.10,
B36.19, ASTM, DIN, SSPC, AWS, MSS, ASM
8. Knowledge on In service code :
API 510 , API 570 ,API 571 ,API 572, API 573 API 582 , API 577,API 526,527,576 , API 653 , API 660,
API 661, API 598, NALCO, NACE
9. In service and Construction inspection & test (Internal & External inspection )of :
Piping & pipe line systems, pressure vessels , Air fans & Heat exchanger ,Reactors ,columns(towers),
Drums ,Filters , Storage tanks ,Boiler and heaters ,Pressure safety valve , general valves , Flare
10. Familiar with damage mechanisms of fixed equipment as per API 571 & failure analysis as per ASM std
11. hydrostatic & pneumatic test, Hardness Test ,
12. material selection & replacement for process plant equipment’s as per ASTM , DIN
2. 2
13. Inspection of raw material and components for as per ASTM & DIN 10204
14. Heat treatment procedure of different materials provide for plant equipment’s.
15. Welding Engineering and Inspection as per AWS , ASME B31, API , spec
Preheat & PWHT requirements inspection , WPS & PQR ,WQT(ASME Sec. IX code), NDT plan & ITP ,
Welding Consumable, , NDT inspection (PT, MT, UT, RTI, VT, LT) ,
16. Paint and coating ,insulation inspection as per SSPC/NACE
17. Corrosion inspection & monitoring of in service plant equipments
18. Repair & mechinary procedure skills and provide technical solutions
19. Piping systems Fabrication, Erection , Inspection & Test as per ASME B31
20. Familiar with boiler water treatment & corrosion control as per ASME , NALCO , spec
21. Familiar with Isometric, P&ID’s and general Checking shop DWG
22. Familiar with health, safety and environmental (HSE) activities and permit to inspection.
Work experiences :
1. Client Name SPGC (south pars gas complex)-Gas Refinery Complex -Assalouyeh
Roles & Responsibilities: Fix Mechanical Equip. Inspector at Refinery (In service inspection & test)
Duration : 20 Apr 2016 – up to now
2. Client Name POLYACRYL Iran Company (chemical plant)
Roles & Responsibilities: Technical plant Inspector & Metallurgy Engineer (In service inspection & test)
Duration: 27th Oct 2006 -20 Apr 2016 (10 year)
About POLYACRYL IRAN Company:
POLYACRYL IRAN, the chemical -textile company ,was established in the year 1975 which has 5 integrated
plants with gas power plant , two acrylic fiber production plant, polyester fiber production plant, water and
waste water treatment plant, glass fiber production plant, engineering department for overhauling, construction,
Repair, Replacement, maintenance, erection for process plant equipment’s such as Piping & pipe line
systems,pressure vessels , Air fans & Heat exchanger ,Reactors ,columns(towers), Drums ,Filters , Storage tanks
,Boiler and heaters ,Pressure safety valve , general valves, Cooling Towers, , Pumps and Rotors , Compressor ,
refrigerator, water treatment unit ,and etc as per spec and DWG.
3. Client Name Merat Poolad Company (Isfahan Steel Company)
Roles & Responsibilities: QC Engineer of steel structure plant
Duration: 3th Apr 2005– 27th Oct 2006
About Merat Poolad Company:
An engineering company contractor company, which is engaged in Design and Fabrication , Erection and
Commissioning of Isfahan steelmaking plant equipment’s .
3. 3
CERTIFICATION & TECHNICAL QUALIFICATION:
1. RTI – ASNT LEVEL II
2. VT – ASNT LEVEL II
3. MT – ASNT LEVEL II
4. PT - ASNT LEVEL II
5. UT – ASNT LEVEL II (attendance certificate)
6. Welding procedure specification(WPS & PQR)
7. Piping inspection
8. QC of industrial projects
9. Welding inspection(level I)
10. Welding inspection(level II)
11. API 510 training course
12. API 570 training course
13. Refinery and petrochemical corrosion inspection and control
14. TPM training course
15. API 653 training course
16. Paint and surface preparation inspection
17. QC and Technical inspection in oil and gas, petrochemical industry
18. Material selection for oil and gas equipments
19. Material selection of industrial equipments
20. Cathodic protection
21. field Mechanical installation
22. corrosion control of pipeline
23. material selection for corrosive environment
24. Corrosion control in oil and gas industry
25. English diploma certified in Iran Language Institute for 550 hrs. training course
Teaching Experiences as Instructor:
1- International Technical inspection and QC course :TUV-ICB international Co.–10000hr course conducted
2- International Technical inspection engineering course ;G2S international Co. (Italy)– 10000 hr- Engineers
participant
3- Welding inspection course : profile sepahan company engineers(22 -23 Jan 2009)
4- Welding inspection course : profile sepahan company technicians(24 , 31 Jan 2009)
5- WPS &PQR ; welding distortion control course : Merat poolad company engineers(19-21 Dec 2009)
6- WPS & PQR course : Isfahan atomic energy Co. engineers(18 – 21 Jan 2010)
7- Welding inspection course: POLYACRYL company (Jan 2007)
8- NDT course: POLYACRYL company (May 2008)
9- Pressure vessel inspection course: POLYACRYL company (May 2008)
10- Principal of corrosion and its control method course: POLYACRYL company engineers (Jan2012)
11- Key to steel course :POLYACRYL company (Jan 2012)
12- Welding inspection course : profile sepahan company (16,17 Jun 2010)
13- Welding inspection course : profile sepahan company technicians (25 Jan , 1 Feb2011)
14- HF-ERW inspection course : profile sepahan company technicians (2,3 Nov 2010)
15- HF-ERW inspection course : profile sepahan company technicians (9, 10 july 2012)
16- HF-ERW inspection course : profile sepahan company engineers (10,11 sep 2014)
17- HF-ERW inspection course : profile sepahan company engineers (29,30 sep 2014)
18- Paint and surface preparation course :moshaverin sanaat Co. engineers (30-31 Aug 2010)
19- Paint and surface preparation course :moshaverin sanaat Co. engineers (27-28 July 2011)
20- Key to steel course :najafabad university : engineer students (23-24 Feb 2011)
21- Technical inspection course :najafabad university : engineer students (1 March 2011)
22- Welding inspection course :najafabad university : engineer students(6-9 March 2011)
23- Paint and surface preparation course –level 1 – POGC company- asalouyeh (7-11Nov 2013)
24- Paint and surface preparation course –level 2 – POGC company- asalouyeh (23-26Feb 2013)
25- Welding inspection course :tooka foolad company technicians-mobarakeh steel company (30 Dec , 6 Jan 2014)
26- Key to steel course :foolad sadra eng. co : engineers (29 Aug 2014)
4. 4
27- Bearing and Housing Bearing course : Iranian Refractories Procurment and production company technicians and
engineers(14 , 15 Feb 2015)
28- Welding inspection course : Hermes academy engineers, (30 Dec 2013, 6 Jan 2014)
29- Welding inspection course : Hermes academy engineers, (21 Sep 2014)
30- Repair welding basics: profile sepahan company technicians (2 sep 2015)
31- HF-ERW inspection course : profile sepahan company technicians (29 sep 2015)
32- Mechanical installation equipments : :foolad sadra eng. co : metallurgy engineers ( 24hr- 10 to 12 Dec 2015) -
IQS UK
33- petroleum and refinery equipments course :foolad sadra eng. co : chemical engineers ( 80hr- Aug 2015)-IQS UK
34- Design, fabrication, inspection & test of piping system : oil and gas engineers, Esfahan petrochemical company
(EPC)- 20 to 25 Feb 2016-IQS UK
Industrial project consultation
1. WPS & PQR preparation for API 5L - 6” HF-ERW line pipe manufacturing according to ASME Sec. IX
2. WPS & PQR preparation for API 5L- 8” HF-ERW line pipe manufacturing according to ASME Sec. IX
Computer skills
1. Microsoft office (word , Internet, power point, Excel, …)
2. Documentation & technical reporting