Sharana Basava.D is seeking a job in mechanical design and has over 2 years of experience. He has strong CAD and CAE skills including Creo, NX, CATIA, SolidWorks and Ansys. He has a M.Tech in Machine Design from BMS Institute of Technology and a BE in Mechanical Engineering from Ballari Institute of Technology. His project experience includes design work for clients in sheet metal components, electrical control panels and casting methods. He is looking for opportunities to apply his mechanical design skills.
More than 1.10 years of experience into mechanical design engineer with good GDNT and casting new method design and development along with good at sheetmetal design
More than 1.10 years of experience into mechanical design engineer with good GDNT and casting new method design and development along with good at sheetmetal design
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Cosmetic shop management system project report.pdf
Sharana basava.d(2 year design_engineer)
1. RESUME
Name: Sharana Basava.D
Email: sharana2494@gmail.com
Mobile: +918296826306
LinkedIn Contact :
linkedin.com/in/sharana-basava-d-835493104
Total Experience : 2 Years ( Available to join immediately )
To work in a creative and challenging environment using mechanical design concepts, where I could constantly
learn and successfully deliver solution to the problems.
2 Years of experience in mechanical design and development.
Strong problem solving skills and creative approach for generating new ideas.
Good knowledge in creating 3D CAD models with 2D drafting.
Strong knowledge about drawing reading and GD&T.
Good at creating sheet metal 3D Cad models with 2D Drafting.
Good knowledge about sheet metal design and development.
Good at CAE analysis to design and develop a new casting methods.
Knowledge about sand, investment and die casting process.
A good leadership with strong team collaboration skills, work closely with team members to achieve engineering
goals.
Company: Harness – Design & Simulation Aid, Bangalore May-2018 – January 2020
Designation: Design Engineer
Roles & Responsibilities:
Project & Client Management.
Report generation & present project analysis.
Making sure all tasks given to interns are done on time and to required standard time.
Prioritising important tasks and ensuring they get done first and get them properly
Developing 3D Cad models and 2D drafting.
Creating 3D sheet metal panels with 2D drafting.
Design and development of sheet metal panels and electrical equipment’s according to customer’s requirements.
Visiting sheet metal shop floor to check the design parameters.
Under-going specific root cause analysis for proper development of the product.
Providing Foundry Method ideologies that can be implemented on the shop floor without any constraints.
Company: Federal Mogul Powertrain , Bangalore August-2017 - December-2017
Designation: Apprentice in plant training
Roles & Responsibilities:
Study of piston ring Manufacturing process.
Study about the quality parameters of manufactured piston rings.
Study about the scrap rate data and identifying the root cause.
Analysis to minimize the major scrape rate problems.
Design and experimental investigation of piston ring lapping process.
Creation of sample operating procedure (SOP) for quality measuring instruments.
CAREER OBJECTIVE:
WORK EXPERIENCE: (2 Years)
ACADEMIC PROFILES:
PROFILE SUMMARY:
ACADEMIC PROFILES:
2. PTC Creo
UG NX CAD
CATIA
Solid Works
Ansys, Ansys Workbench
Z Cast Pro (Casting Simulation)
Solid Edge , AutoCAD 2D&3D
1. Title : Design and Experimental Investigation of Lapping Process for Productivity Improvement of
I-Section Piston Rings at Federal Mogul powertrain
Major scrap rate survey has been done for production of piston ring at federal mogul TPR plant and root
cause has been identified as ring loading method, design optimisation done for loading method in lapping
process to reduce the major scrap rate and improve the production rate and quality of I section piston rings.
2. Title : Design and Fabrication of solar heater and cooler by the application of thermo electric module
By using Peltier effect principle a device has been designed and fabricated, which can be used as heater as
well as cooler with the help of solar Energy.
3. Title: Design of electrical control panel.
Client: J N Tech Solutions.
Electrical enclose panel design and development done for the according to customer requirement and visited
to contrive company to check all the parameters are according to design parameters.
4. Title: Design of HMI Mounting boxes
Client: J N Tech Solutions.
New HMI Sheet metal mounting boxes are design and developed to protect from rain water entering to hmi
boxes and to increase the corrosion resistance.
5. Title : New Casting method design and development
Cleints: Rajamane Industries Pvt. Ltd.
Visited rajamane industries plant and new casting method design and developed for gear box housing
component for die casting process improve the robust design and yield improvement.
6. New casting method design and development
Cleints: Rajamane Industries Pvt. Ltd.
New casting method design and developed for investment process for the component gate valve to improve
the robust design and yield improvement.
2D Drafting
3D Modelling
GD&T & Drawing Reading
New casting method design and development
Sheet metal Design
Research and Development
Course Name Of School/College Board / University Percentage
Year of
Passing
M.Tech
(Machine Design )
BMS Institute of Technology
and Management, Yelahanka,
Bangalore
VTU, Belgum 8.32 2018
B.E (Mechanical
Engineering)
Ballari Institute of Technology &
Management, Ballari VTU, Belgum 70.84% 2016
PUC
Wardlaw Composite PU
College, Ballari
state Board of
Secondary education
71.38% 2012
SSLC ST. Johns high school, Ballari state Board 84% 2010
ACADEMIC PROFILE:
SOFTWARE SKILLS:
Technical Skills
TECHNICAL SKILLS:
Technical Skills
PROJECT UNDERTAKEN:
ACADEMIC PROFILES:
3. Represented “Harness Design and Simulation Aid” in the event “Nasscom Product Conclave” held at Taj hotel
Bangalore on 5th
-6th
November 2019.
Published a research paper in “International Journal of Scientific Engineering and Research” with Paper ID:
IJSER72707 and Entitled with “Design and Experimental Investigation of Lapping Process for
Productivity Improvement of I-Section Piston Rings”.
Participated in the final dynamic round held on 26th
to 28th
February 2015 at Rpm international circuit,
Bhopal (Madhya Pradesh).
Secured second place in chess in district level south region sports competition.
Completed junior level NCC training and Attended CATC NCC camp in the year of 2008.
Participated in the “All India Seminar on Residual Stress and Advanced NDT Techniques for Structural
Integrity Assessment Key Challenge And Remedies” at IISC Campus, Bangalore.
Name Sharana basava D
Fathers Name Rajasekhar.D
Mothers Name Mamatha.D
Date Of Birth 02-04-1994
Gender Male
Nationality Indian
Languages Known English, Hindi ,Kannada & Telugu
Hobbies
Current Address
Drawing, Playing Chess, Photography ,Playing Cricket,
watching documentaries, Creating 3D Models
#2 Vivek boys pg near vishal mega mart 4th
phase,
Yelahanka new town Bangalore-560064
Permanent Address #80, 2nd
cross jayanagar, near TB Sanatorium, Ballari-583101
I hereby declare that the above written particulars are true to the best of my knowledge and belief. I understand
that if any information given above is found false /incorrect, my candidature is liable to be rejected.
Place: Bangalore
Date: Sharana Basava. D
AWARDS & ACHIEVEMENT:
PERSONAL PROFILE:
DECLARATION: