Jaya Mishra is an electrical design engineer with over 7 years of experience in engineering design for power plants, oil and gas projects, and substations. She has expertise in electrical equipment sizing calculations, engineering layouts and drawings, and power system studies. Some of her project experience includes performing owner's engineering services for 2x600MW thermal power plants in India, detailed engineering for lighting packages on offshore oil and gas projects in Norway and Oman, and feasibility studies for power plants in Senegal.

1. JAYA MISHRA
Contact No. +91-9952088269
E-mail: mishraj.viet.11@gmail.com
CAREER OBJECTIVES
“To obtain a position that will enable me to use my ability to analyze complex
engineering problems, evaluate and recommend alternatives and communicate
recommendations effectively seeking a full-time position with the company.”
EXPERIENCE SUMMARY
Professional Skills:
Engineering & Design of electrical systems for Power plants Generation, Power
Transmission & Distribution ,Oil & Gas plants, Sub-stations, Process Plants at Pre
bid/Basic/Detailed Engineering levels & Review of existing system.
Key skills & Activities:
Key skills include Preparation of Equipment & installation Specifications, layout
drawings, Power system studies, sizing calculations, data sheets, Bill of material /
quantity, Estimation, Single line diagrams, pre-feasibility / feasibility report, Design
basis report in line with National and International Standards, hazardous area
classification, codes and guidelines like IS, ANSI, NEMA IEC, BS, IEEE.
Electrical equipment sizing calculations
• Power transformer (HV / LV) sizing calculation
• Illumination system - Lighting and small power calculations – (Softwares : Dialux
Photolux)
• Earthing & lightning protection calculation – (switchyard , plant area, utilities)
• LT / HT cable sizing
• GCB & Bus Duct sizing
• Switchyard Calculations (Cantilever strength calculation & Short Circuit Force
Calculation)
Engineering of Electrical layouts, General arrangement (G.A) & Drawings
• Illumination - Lighting and small power layouts & drawings
• Electrical room- Switchgear room layout & drawings
• Earthing & Lightning protection layouts
• Switchyard & Transformer yard layout
Electrical Power system studies – (Software: ETAP)
• Short circuit analysis / Fault analysis (General standard algorithm, IEC909
standard)

2. • Load flow (power flow) analysis
EXPERIENCE PROFILE
Designation: Electrical Design Engineer
Organization: Fichtner Consulting Engineers (India) Pvt. Ltd
Duration: AUGUST 2012 - till date
PROJECTS HANDLED
• 2X 600 MW Thermal Power Plant : IL&FS Cuddalore Power Project
Performing Owner’s Engineering services for the power project that includes
vendor engineering review for 400kV Switchyard, Single Line Diagram, Equipment
layout, Earthing layouts, Illumination and small power layout, Communication
system, Design calculations, Data sheets of various Electrical Equipments, System
Studies (load flow analysis and short circuit studies), BOQ, Electrical Load List and
Spares list and review of various ITP and test reports, auxiliary power consumption
details etc. Detail engineering of various Miscellaneous Buildings includes
preparation of tender specification, SLD, Illumination layout drawings, Earthing and
Lightning protection layout, Design calculations and BOQ.
• 2X 600 MW CPP-FGD Plant : IL&FS Cuddalore Power Project
Working as a LEAD ENGINEER - Performing Owner’s Engineering services
for the power project includes vendor engineering review for Preliminary design for
FGD ,Single Line Diagram, Electrical Equipment layout plan, DC System- calculation
and SLD, UPS System- Calculation and SLD, DG Calculation ,HV Switchgear
/Schemes , LV Switchgear/Schemes, Cable& Cabling layout , Lighting & Lightening
Layout, , vendor specifications , IDC documents etc. .
• 2X 660 MW Thermal Power Plant ( Phase II and FGD ): IL&FS Cuddalore
Power Project
Performing Owner’s engineering services for the power project includes
vendor engineering review of Specification as per CEA guidelines, review of FGD
preliminary specification and Spares list.
• Martin Linge (Oil & Gas Project ) : North sea, Norway
During deputation to Technip for three months involved in detailed Lighting
Package that includes calculation through Dialux, block diagram for the lighting and
small power and cable sizing for the same.
• JSC YAMAL LNG (Oil & Gas Project) : Yamal peninsula
During deputation performing detailed engineering for the Lighting Package
for the compressor area.
• Development of Oil Reservoir : Yibal, Oman
Performing Pre-bid engineering services for the Oil & gas project includes
preparation of bill of quantities for Illumination and Small power package.

3. • 2X 160 MW PPN Thermal Power Plant : Pillaiperumalnallur Village,
Nagapattinam , Tamil Nadu
Performing Owner Engineering service for the coal fired TPP that includes
preparation of detailed project report and tender single line diagram.
• 2X 300 MW Thermal Power Plant ,TRN Energy : Raigarh District,
Chattisgarh
Performing Owner Engineering service that includes review of single line
diagram, cable calculation/layout, earthing and lightning layout, lighting and small
power layout for, data-sheet for the cables, NGR, transformer, GA drawing of CT,
VT, dry type transformers etc .
• 1X 660 MW Supercritical Thermal power plant, Ennore , Tamil Nadu
Performing Detailed Engineering services for the coal fired TPP that includes
preparation of detailed specification for HT Cables, Overall Specification for Non
plant buildings, BOQ for Non plant Buildings, LT control schemes
• 66/11kV Seimens Qatar Underground Substation
Performing Deatiled Engineering service for the underground substation that
includes preparation of control cable schedule and interconnection cable schedule,
padlocking scheme.
• 1X150 MW Subcritical Thermal Power Plant , Kayar Senegal
Working as a LEAD ENGINEER in performing Feasibility Report for the plant
and SLD
• 2X350 MW Coastal Thermal Power Plant , Thamminaptanam
Performing Owner Engineering service that includes review of LV Switchgear
& LV Schemes.
.
Role & Responsibilities
• Responsible for electrical drawings, specifications, calculations.
• To provide the entire electrical solutions as per requirement. .
• To check the entire work as according to approved drawings.
• Categorizing customer requirements and designing as per the requirements
• Cost estimation and preparing Bill of Quantity
• Coordinating with the other departments, clients and contractors
• Attending meetings with Clients and Contractors
• Keeping in line with the latest developments and technology
• Working more efficiently and productively so that maximum output comes.
SOFTWARE PROFICIENCY
• Thorough in Wrench Software, Dailux/Photolux, Navisworks, ETAP(basic
tools).
• Well versed in Windows XP and Windows 7.
• Proficiency in entire MS-Office and Internet tools.

4. EDUCATIONAL QUALIFICATIONS
Post Graduate
Diploma Course
POWER SYSTEM TRAINING
INSTITUTE (BANGALURU)
2012 80%
B. Tech. VISHVESHWARYA INSTITUTE OF
ENGINEERING & TECHNOLOGY
(UPTU)
2011 71.7%
XII NEW WAY SCHOOL (CBSE) 2007 78.6%
X NEW WAY SCHOOL (CBSE) 2005 83.4%
OTHER PERSONAL DETAILS
Date of Birth: 14th
June 1988
Hobbies: Travelling, watching movies, grooving to some good music, travelling.
Languages Known: Hindi, English.
DECLARATION
I hereby declare that all the information’s given above are true to the best of my
knowledge and belief.
Date: (Jaya Mishra)
Place: Chennai