Ashu Bhatt is seeking a challenging position to enhance his skills in a professional organization. He has over 2 years of experience as a BMS and Control engineer for Daikin Air-conditioning in Dubai. His responsibilities included commissioning Daikin chillers and interfacing them with third party BMS systems. He has experience with Bacnet, Modbus, LonWorks, and Daikin's own protocols. One of his projects was installing and commissioning an I-Touch Manager BMS system for the Dubai Tram project. He also has 10 months of experience as an Electrical & Instrumentation Trainee. Ashu holds a Bachelor's degree in Instrumentation Engineering and is proficient in MS Office,

1. ASHU BHATT
Mobile: +918814984754 ~ E-Mail: ashu.bhatt89@gmail.com
To achieve a challenging position in a professional organization, where i can enhance my skill and
strength, in conjunction with company goal and achieve excellence in my every deal through team
work.
PROFESSIONAL SYNOPSIS
Worked 1 year and 6 months as a BMS and Control engineer with Daikin Air-conditioning Middle east
& Africa, Dubai, UAE.
Dedicated to provide comprehensive solutions that satisfy organisation’s goal.
Provide product technical support.
JOB RESPONSIBILITIES
Involved in the commissioning of Daikin Air-cooled chillers.
Involved in the execution of projects and their
documentations related to the commissioning of Daikin
Chiller Plant Manager.
1. Review building chilled water drawing schematic, layout
and prepare chilled plant room network structure.
2. Prepare/review specification and compliance statement
as per project guidelines.
3. Prepare/review control and data points schedule list.
4. Prepare/review the functional description and sequence
of operation of the chiller plant manager.
5. Prepare/review BOM sheet.
6. Review material technical data sheet.
Worked on the interfacing works of the Daikin chillers (Air-
cooled & Water cooled) with third part BMS system using
Bacnet IP/MSTP, Modbus protocol.
Carried out the interfacing works of DAIKIN VRV II, VRV III
system with third party BMS system.
Carried out the interfacing works of DAIKIN SPLIT system
with third party BMS system.
Worked on the Daikin D3 Network protocol of Daikin VRV
system.
Worked on the commissioning of Daikin Airnet(Remote
monitoring) system for VRV units offer performance
monitoring and remote services.
1. Monitoring of Indoor and Outdoor units operation such
as:
Project Documentation
Start-up/Commissioning
Supervision/Co-ordination
Product Technical Support

2. a. Temperature of heat exchangers, outside
conditions, four way valves, solenoid valves,
Inverter parameters, switches status etc.
b. Operation mode of cooling, heating and fans.
c. Status of transmission between indoor and outdoor
units liquid pipe temperature, gas pipe
temperature, thermostat signal etc.
d. Operation history and protection of parts
replacement timing such as total operating hours,
number of on/off cycles, total on time for
thermostat, compressor operation frequency.
Prediction level anticipation notification for
maintenance within 24 hours, several weeks and
months.
Carried out the commissioning of Daikin Airnet system
(Remote monitoring) for Chiller units offer performance
monitoring and remote services.
Worked on the commissioning of Daikin central controller(I-
Touch controller)
Worked on the commissioning of Bacnet and LonWorks using
Daikin controller DMS5022B71 & DMS504C71 to VRV systems,
Indoor units and other local controller with BMS system.
Fire alarm, security, lighting, lift and power supply facility
(elevator, pump lighting) interface on Bacnet and Lonworks
with BMS.
Worked on the commissioning of the Daikin Mini BMS
system(I-Touch manager)
1. Interfacing of fire, security system and power supply
facility with I-TOUCH Manager.
2. Interfacing of lighting, pump, sensor, & AHU using Wago
Node.
3. Web access of I-TOUCH Manager via internet and
LAN(local area connection).
4. Interfacing of VRV and indoor units using ITM plus
adaptor up to 64 unit groups.
5. Interfacing of VRV and indoor units using D-III NET
adaptor up to 1024 units.
6. Web remote management of I-Touch manager using
hub/switch/router up to 4 administrators and 60 users
at the same time.

3. 7. Auto-change over to both VRV and heat recovery
system, weekly schedule with dual setpoint for the
occupied period and setback setpoints for the
unoccupied period round schedule programming upto
100 schedule programs upto 20 events per day.
8. Automatic Alert/Error e-mail enables prompt response
to service person up to 10 email-addresses can be set.
Worked on the commissioning of Daikin various controller
such as Liquid crystal wired remote controller, wireless
remote controller.
Worked on Daikin MTII Carel (pico2, pico3) & MTIII Siemens
controller used in Daikin Air-cooled and Water cooled units.
Worked on the Siemens SIMATIC S7-1200 controller and HMI
panels series 270.
Knowledge of PLC & DDC system controller. Type of
programming language used to programme the PLC & DDC
controller.
Knowledge of Chilled water system (Primary only,
Primary/Secondary, & Variable primary flow) and
equipment(DP sensor, 2 way/3 way valve, motorized
butterfly valve on/off & regulated valve, temperature
sensors, flow metering device, Cooling tower operation
control). Overview of Building Management System
Project
Project Name : Dubai Tram (formerly, Al Sufouh Tram Project), Dubai, United Arab Emirates)
The Dubai Tram project, which was formerly known as Al Sufouh Tram Project, is a 14.6km-long route and
the first modern application of trams in the Gulf region.
Duration : 4 months
Scope of Work: Installation and commissioning of I-Touch Manager as BMS system for the entire
project.
1. Interface of the lighting, fire alarm, UPS, sliding door, lift, emergency lighting, and emergency
battery system over bacnet IP gateway with I-TOUCH manager.
2. Monitoring of the lighting, fire alarm, UPS, sliding door, lift, emergency lighting, and emergency
battery system over bacnet IP gateway with I-TOUCH manager.
3. Power monitoring of the complete system and equipment’s used for the entire project.
4. Trending of the power/energy data to diagnose the excess of energy usage in respect to the
target value on an hourly or daily basis.

4. Worked 10 months as Electrical & Instrumentation Trainee Engineer with Automation Solutions FZC,
SAIF ZONE Sharjah, UAE.
JOB RESPONSIBILITIES
Involved in the installation, pre-commissioning, commissioning of the instrumentation equipment’s as
per Technical specifications/Data Sheets.
Read & review overall project to prepare list of instrumentation, electrical & related material.
To prepare & review data sheets of Electrical & Instrumentation Equipment’s and cable such as:
1. Power cables 2. Instruments cables 3. Control cables 4. Earthing cables.
Gauges, Transmitters (Pressure, Level, Flow etc.), Control valves, On/Off valve, Switches, Push
Button (Start/Stop & ESD), Pump Motors.
To prepare & review Instruments documents i.e. Cable Schedule, Instruments Index etc.
Read and review Instrument drawings & Instrument loop diagrams.
Procurement of material as per specification & data sheets.
Prepare invoices and purchase orders for the procurement of the materials.
Plan & sequence the work by closely co-ordinating with the operation team for any activity that
requires work permit from the plant operation.
Mapping client’s requirements & ensuring rendering of solutions as per project specified guidelines;
minimizing bottlenecks for high quality of service for increasing the Customer Satisfaction Index.
Provide assistance to the Client for commissioning of the facility with specialist crew, labour, tools,
tackles, consumables. Provide commissioning specialist support for the items supplied whenever
necessary & needed.
PROFESSIONAL ENHANCEMENTS
Innovation, & Creativity
Technical Skills
Presentation Skills
SCHOLASTICS
Bachelor of Engineering in Instrumentation passed out in Dec 2012 from the Institute of
Instrumentation Engineering (USIC), Kurukshetra University, India
Computer Proficiency:
Well versed with MS-Word, Excel, Power point presentation and internet application.

5. College Internship Training
Organization : Hindustan Machine Tool Ltd.
Duration : 6 weeks
Organization : HARTRON PVT LTD. Ambala (Haryana)
Duration : 6 weeks
PERSONAL DOSSIER
Sex : - Male.
Date of Birth : - 13 June, 1989
Languages Known : - English, Hindi.
Having UAE driving license since FEB 2015
Declaration:
I hereby declare that the above mentioned information is correct and true to the best of my knowledge.
Ashu Bhatt