Rajasekar Periyasamy is seeking to increase his potential and innovate in the construction field. He has 6 years of experience in construction projects in roles such as QA/QC Engineer and Project Engineer. His most recent role was as a QA/QC Engineer for a residential building project in Dubai overseeing quality control and assurance. He is looking to further his career and contribute to organizational growth.
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
Dear Sir/madam,
I would like to introduce myself as a Mechanical engineer with 7 months of experience in designing & site execution of Mechanical works.
Currently I am on a visit visa seeking an opportunity to secure a challenging and competitive position as a Mechanical Engineer in a reputed organization that enables me to share and enrich my knowledge in all possible dimensions.
Please find my attached CV for your consideration, and if there is any vacancy in your firm kindly let me know. For further details about my profile you can contact me on my below given mobile no. or email.
Best Regards,
HAMID ABDUL SAMI
MOBILE: 0559546542
E-MAIL: hamidasami1606@gmail.com
Extensive experience of project management, design & client liaison. Experience of interpreting specifications and preparing technical proposals. Ability to multi-task in a demanding engineering environment. A strong track record in delivering projects on time and within budget. Able to ensure that all H&S procedures are met and maintained. Resolving complex technical issues and coming up with fast efficient solutions. Ability to assess the financial feasibility and impact of proposed budget items and also alternatives.
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
Dear Sir/madam,
I would like to introduce myself as a Mechanical engineer with 7 months of experience in designing & site execution of Mechanical works.
Currently I am on a visit visa seeking an opportunity to secure a challenging and competitive position as a Mechanical Engineer in a reputed organization that enables me to share and enrich my knowledge in all possible dimensions.
Please find my attached CV for your consideration, and if there is any vacancy in your firm kindly let me know. For further details about my profile you can contact me on my below given mobile no. or email.
Best Regards,
HAMID ABDUL SAMI
MOBILE: 0559546542
E-MAIL: hamidasami1606@gmail.com
Extensive experience of project management, design & client liaison. Experience of interpreting specifications and preparing technical proposals. Ability to multi-task in a demanding engineering environment. A strong track record in delivering projects on time and within budget. Able to ensure that all H&S procedures are met and maintained. Resolving complex technical issues and coming up with fast efficient solutions. Ability to assess the financial feasibility and impact of proposed budget items and also alternatives.
1. OBJECTIVE
To geometrically increase my potential and innovate in the field which I work
along with the growth of the organization.
WORK EXPERIENCE
YEAR OF EXPERIENCE: 6 YEARS.
MAJOR AREA : CONSTRUCTION,PROJECT ENGINEER,QA/QC ENGINEER
CURRENT EMPLOYER
ETA- ASCON, Dubai, UAE
Designation : QA/QC Engineer.
Period of working : 10 Months
Project Location : Dubai-UAE
Client : DAMAC.
Project details and Responsible:
G+ 9 Appartments, AKOYA GOLF COMMUNITY by DAMAC PROPERTIES.
1. To assist site SR.QA/QC Engineer in reviewing , understand and discuss Project Scope of
Work and specification requirements and preparing QA/QC documents.
2. Coordinate with the ready-mix concrete batching plant and client for carrying out trail mixes
of approved mix designs and ensure that the test results meets the project specification
requirements.
3. Provide training to all workers trough Conduct tool box talk before start every new activity at
site.
4. Checking and confirming the drawings and materials using at site are approved by client /
consultant.
5. prepare detailed inspection reports on the stores operations performance on weekly basis and
assist Sr. QA/QC Engineer / Procurement Division in resolving discrepancies in line with the
Company documented procedures / instructions.
6. Coordinate with Construction supervisory staff to prepare, submit a follow-up of Inspection
Requests, Inspection Reports, Test Reports etc to the client and consultant.
7. Review and comment and follow up of all inspection reports and / or certificates submitted by
the Third party laboratory, Subcontractors or vendors before forwarding the consultant..
8. Ensure the effective implementation of approved Method Statements and Inspection /Test
Plan through regular surveillance and Carryout routine / schedule inspections on the on-going
/ completed activities, discuss the deviations found with the Project manager and raise non-
conformance / observation reports.
9. Prepare snag and desnag list for all finishing activity to final handing over to client .
RAJASEKAR PERIYASAMY,
B.E-Civil Engineering
United Arab Emirates-Dubai
Phone;+971557810315
Email id: raja1987sekar@yahoo.com
2. M/S WADI SAROOJ TRADING LLC.OMAN
Designation : Civil –Project Engineer cum QA/QC Engineer.
Period of working : November2012 to June 2014.
Project Location : Ruwi-Muscat.
Project details and Responsible;
1. Commercial Cum Residential building construction for al nasr group of company.
2. 12 Stored (B+L1+L2+G+7+P.H) building has each floor 1000 SQ.M area with under ground
car parking .
3. completed the full project with in the 20 months scheduled program .
4. Allocate the manpower and supervise all site activity as per quality , safety policy .
5. Time to time reporting to project manager and discuss all necessary requirement .
6. prepare the sub –contractor bills and monthly progress report.
7. Attending project meeting with client and consultant to review quality and progress of the
project .
BRIDGE AND ROOF CO (I) LTD, MUMBAI.
Project : TDA PLANT FOR GNFC.
Designation : Construction Engineer.
Period of working : Feb 2010 to October 2012.
1. Construction of bored pile foundation for 50000MTPY TDA chemical plant in DAHEJ-
GUJARAT.
2. Prepared the quantity of material required for construction work and the clients and
subcontractors bills.
3. Planning for day today activity of site work and manpower ,equipment required for progress at
work.
4. Executed five thousand bored pile for boiler and cooling tower for chemical plant at quick
span of 6 months.
Project: NHT/CCR PROJECT FOR BHARAT PETROLUEM
CORPORATION LIMITED.MUMBAI REFINERY-MAHUL.
1. Constructed a pipe rack structure at a petrochemical plant.
2. Construction of compressor house and compressor foundation for industrial facilities for
petroleum plant3
3. Involved in the construction of the various equipments and exchanger foundation, cable
trenches, water retaining structure in the project.
4. Involved in the construction of Structural buildings.
5. Preparation of Client and contractors bills.
6. Preparing daily and weekly plans for the execution of work with the clients and the
consultants.
7. Preparation of catchup plans in every fornightly meetings.
MARG LIMITED, CHENNAI
Project Assigned :
Name of the project : MARG KARAIKAL PORT RAILWAY
Designation : Graduate Engineer Trainee - PROJECTS
Period of working : June 2009 to Jan 2010.
Project details and Responsible;
1. Handled the 4.5KM broad gauge three line railway track project link the MARG
KARAIKAL PORT TO KARAIKAL –NAGOOR RAILWAY MAIN LINE.
2. Handled the railway line embankment making work and ensured the quality of back filling
material and compaction of the embankment through site core cutting method.
3. Involved in the checking the quality of ballast used for sleeper packing work through sieve
analysis test and crushing test.
4. Constructed one storied 1000 sq.m official building for railway managers and guards.
5. Prepared the daily progress report for various activities in port projects.
3. COMPUTER SKILLS
Application Software : AUTOCADD, MS Excel, MS office.
EDUCATIONAL DETAILS
High School from Government higher secondary school v.kalathur , with 84.2% year of passing
2003.
Higher Secondary Course from Thanthai Hans Roever Higher Secondary School, Perambalur
with 90.25% year of passing 2005.
Graduation in Civil Engineering from Kumaraguru College of Technology, (Anna
University)Coimbatore with 78.50% year of passing 2009.
CO-CURRICULAR ACTIVITIES
In Plant training:
Undergone in Plant training in “Parambikulam Aaliyar ” IRRGATION DAM MAINTANANCE
PROJECTS for two weeks
Presentation:
Presented a poster on “NON DESTRUCTIVE TESTING” in National Institute Of Technology,
Trichy..
Project:
PLANNING, ANALYSIS AND DESIGN OF A SHOPPING COMPLEX.
Project done in college final year using staad pro design a shopping complex building.
Seminars / Workshops attended:
Workshop on “GIS and its Applications in Civil Engineering” in Kumaraguru College of
Technology, Coimbatore
Workshop on “ANSYS Design Software” in National Institute Of Technology, Trichy
Attended a Skill Building Workshop in Indian Institute of Technology, Chennai
Awards and Achievements
Won various prizes in Elocution, Quiz and Essay writing Competitions in college and school levels
Won First place in Cricket, KCT Intra zonal match
Attended NCC CATC camp in Sri Ram College of Arts & Science in Pollachi
Club Membership
Member of National Cadet Corps
Member of National Service Scheme
HOBBIES
Gardening, swimming, music listening
PERSONAL DETAILS
Father’s Name : S.Periyasamy (late)
Mother’s Name : P.Indirani
Date of Birth : 03.01.1987
Age : 28
Nationality : Indian
Address : maravanatham (village),
perambalur(district),Tamilnadu
Languages Known : Tamil, English ,hindi
DECLARATION
I, here by declare that the information furnished above is true to the best of my
Knowledge
Date :
Place : DUBAI
(Rajasekar.P)