The document provides information about PT Quamaxindo Utama, an Indonesian engineering company established in 2006. It details the company's address, leadership, divisions, health and safety policies, capabilities in areas like tank construction, piping systems and cement plants. It also lists several completed and ongoing projects for clients in the oil, gas and mining industries, demonstrating experience in fabrication, construction and commissioning.
Onoghenero Onoyeyan is seeking a highly motivated and result oriented role. He has over 5 years of experience in sales, marketing, and operations. His most recent role was as a Turbine Operator at Atmospheric Gases Limited, where he monitored equipment and recorded operational data. Prior to that, he worked in marketing for Sterling Bank and completed his NYSC with Doland Resource and Services coordinating safety inspections. Onoghenero holds a B.Eng in Petroleum Engineering from University of Port Harcourt and has attended several training programs in areas such as money laundering prevention, HSE appreciation, and leadership.
PT Borneo Persada Internasional provides mechanical, electrical, fabrication and general supply services. It was established in 2005 and operates workshops in Balikpapan. The company serves customers in oil/gas, mining and other industries. It offers fabrication, piping installation, equipment rental, and general supplies. PT Borneo Persada Internasional aims to be a world-class provider of mechanical and electrical services through experienced staff and a focus on safety, quality and technology.
This document provides information about PT Quamaxindo Utama, an Indonesian engineering and construction company. It was established in 2006 and is located in Jakarta. The company has experience in oil, gas, and petrochemical engineering projects. It has completed projects for clients like Pertamina, Bosowa, and ConocoPhillips. Current ongoing projects include fuel storage infrastructure for a coal mining site in Central Kalimantan.
This document advertises mechanical, electrical, and plumbing (MEP) solutions from an Indonesian company. It provides examples of major projects the company has worked on, including for banks and airlines. The company offers MEP audits and assessments to ensure safety, reduce costs, and comply with regulations. Short circuits from electrical systems are a major cause of fires in Indonesia, so the company's services can help prevent accidents and save lives.
Nandu Krishnan is seeking a position as an AutoCAD draughtsman in Dubai, UAE. He has over 8 years of experience working as an AutoCAD draughtsman focusing on plumbing and firefighting engineering drawings. Some of the major projects he has worked on include the Muscat International Airport, Majlis Oman Parliament building, and residential towers in Dubai. He has a diploma in Mechanical Engineering and is proficient in AutoCAD, Revit MEP, and Microsoft Office software.
1) Hanking Co. Ltd is developing new nickel processing projects in Indonesia, including an NPI plant and ferronickel plant.
2) The NPI plant will have a production capacity of 50,000 tons per year and use shaft furnace technology. It began construction in 2013 and aims to begin commercial operation in 2016.
3) Hanking is also constructing a ferronickel plant with a production capacity of 115,000 tons per year of 12.84% ferronickel. It has a capital expenditure of $245 million and also aims to begin commercial operation in 2017.
The document provides information about PT Quamaxindo Utama, an Indonesian engineering company established in 2006. It details the company's address, leadership, divisions, health and safety policies, capabilities in areas like tank construction, piping systems and cement plants. It also lists several completed and ongoing projects for clients in the oil, gas and mining industries, demonstrating experience in fabrication, construction and commissioning.
Onoghenero Onoyeyan is seeking a highly motivated and result oriented role. He has over 5 years of experience in sales, marketing, and operations. His most recent role was as a Turbine Operator at Atmospheric Gases Limited, where he monitored equipment and recorded operational data. Prior to that, he worked in marketing for Sterling Bank and completed his NYSC with Doland Resource and Services coordinating safety inspections. Onoghenero holds a B.Eng in Petroleum Engineering from University of Port Harcourt and has attended several training programs in areas such as money laundering prevention, HSE appreciation, and leadership.
PT Borneo Persada Internasional provides mechanical, electrical, fabrication and general supply services. It was established in 2005 and operates workshops in Balikpapan. The company serves customers in oil/gas, mining and other industries. It offers fabrication, piping installation, equipment rental, and general supplies. PT Borneo Persada Internasional aims to be a world-class provider of mechanical and electrical services through experienced staff and a focus on safety, quality and technology.
This document provides information about PT Quamaxindo Utama, an Indonesian engineering and construction company. It was established in 2006 and is located in Jakarta. The company has experience in oil, gas, and petrochemical engineering projects. It has completed projects for clients like Pertamina, Bosowa, and ConocoPhillips. Current ongoing projects include fuel storage infrastructure for a coal mining site in Central Kalimantan.
This document advertises mechanical, electrical, and plumbing (MEP) solutions from an Indonesian company. It provides examples of major projects the company has worked on, including for banks and airlines. The company offers MEP audits and assessments to ensure safety, reduce costs, and comply with regulations. Short circuits from electrical systems are a major cause of fires in Indonesia, so the company's services can help prevent accidents and save lives.
Nandu Krishnan is seeking a position as an AutoCAD draughtsman in Dubai, UAE. He has over 8 years of experience working as an AutoCAD draughtsman focusing on plumbing and firefighting engineering drawings. Some of the major projects he has worked on include the Muscat International Airport, Majlis Oman Parliament building, and residential towers in Dubai. He has a diploma in Mechanical Engineering and is proficient in AutoCAD, Revit MEP, and Microsoft Office software.
1) Hanking Co. Ltd is developing new nickel processing projects in Indonesia, including an NPI plant and ferronickel plant.
2) The NPI plant will have a production capacity of 50,000 tons per year and use shaft furnace technology. It began construction in 2013 and aims to begin commercial operation in 2016.
3) Hanking is also constructing a ferronickel plant with a production capacity of 115,000 tons per year of 12.84% ferronickel. It has a capital expenditure of $245 million and also aims to begin commercial operation in 2017.
This document outlines a 16-stage fabrication and erection sequence for a tank storage terminal in Karimun, Indonesia. Stage 1 involves laying the annular plate and bottom plate foundations. Stages 2-4 continue bottom plate laying. Stage 5 completes bottom plate erection and begins the first shell course. Stages 6-8 erect the second shell course and add stairways. Stages 9-14 jack up layers and erect additional shell courses. Stage 15 completes shell laying. Stage 16 involves erecting the roof.
This document provides a business plan for a Dosa restaurant. It outlines objectives to keep food costs below 35% of revenue and expand marketing. The plan details the restaurant's mission to provide excellent food and service. It will feature indoor and outdoor seating with a unique Indian design. The menu will focus on dosas and other South Indian cuisine. The plan analyzes the target market and identifies competitors. It proposes strategies for marketing, sales, management, hiring staff, and financial projections.
The document provides an executive summary for a proposed coffee shop called Coffee Spot Café to be opened in Connersville, Indiana. The café will offer a variety of coffee drinks, teas, baked goods and breakfast sandwiches. The goals are to become well-known locally and potentially expand to other locations or add catering. The SWOT analysis identifies strengths, weaknesses, opportunities and threats. Financial needs are estimated and the business will be run as a sole proprietorship. Market research identifies the target market and competition. A marketing strategy and break-even analysis are also included.
The Unify Company is a new centralized web development company in the Caraga Region of the Philippines. It is led by CEO Ferdinand Balbin and aims to create a website that promotes tourism and allows local businesses to advertise their products and services. This centralized portal will help overcome the challenges of individual business websites having low visibility. The company works with the Department of Tourism to distribute promotional materials and hopes to generate revenue through business subscriptions to the website.
PT. DENKI ENGINEERING provides general contractor and supplier services for commercial and industrial projects. Their vision is to be a competitive, reliable company that can perform synergies with others and become a global construction company. Their mission is to provide engineering services professionally for customer satisfaction and stakeholder prosperity. They have experience with various electrical, mechanical, and construction projects since 2009 for companies across industries.
This document provides information about APS Lanka (Pvt) Ltd, an electrical and mechanical services company in Sri Lanka. It outlines their vision, mission, quality and safety policies. It also includes details of their management team, project teams, recent and completed projects which involve electrical, extra low voltage, plumbing and drainage installations. Their vision is to become the top quality electrical engineering services provider in Sri Lanka and their mission is to deliver full turnkey solutions through excellence, technology and effective partnerships.
PT. RPM was established in 1989 and distributes hardware, machinery, and industrial equipment across Indonesia. It has eight sister companies and aims to be a leading supplier of high-quality products and services. The company strives for excellence through its commitment to on-time deliveries, expanding product offerings, and improving employee performance.
This document is a curriculum vitae for Moch Zainal Abidin that includes his personal details, educational background, training and certificates, computer abilities, work experience, and projects. It shows that he has over 10 years of experience in structure design, electrical and instrument drafting, and vessel drafting for oil and gas projects in Indonesia and Malaysia. His most recent role was as a structure designer for SAIPEM working on projects in Angola and Namibia.
Bellibatubara has over 11 years of experience in mechanical engineering, quality control inspection, and project management. He has worked for several companies in roles such as operator, administrator, supervisor, and marketer. His background includes inspecting power plant construction, operating water turbines, managing warehouse administration, and supervising telecommunications infrastructure installation projects.
Sulhendra is an Indonesian electrical engineer seeking new opportunities. He has over 10 years of experience in quality control, production, and installation roles in various industries including oil and gas, electronics, and telecommunications. Sulhendra holds a Bachelor's degree in Electrical Engineering and various welding and quality management certifications. He is proficient in English, Indonesian, and Microsoft Office programs.
SINBERY CORPORATION SDN BHD (SCSB) is an electrical and instrumentation services company founded in 1990 in Malaysia. It provides services to oil and gas, petrochemical, and power generation facilities. SCSB has grown over 13 years through participation in many projects, developing an experienced team and fleet of equipment. It aims to provide comprehensive value-added products and services to meet client needs. The company profile provides details on SCSB's capabilities, projects, clients, safety records, and past experience.
MK Tech Engineering & Contractors provides construction services with skilled staff who have industry experience. They work closely with clients and other organizations to understand project needs. The company aims to deliver quality, cost-effective, and reliable products and services to customers and create value for stakeholders. They have experience in mechanical, electrical, and other sectors on various power, industrial, and chemical plant projects.
This document contains personal and employment details of Ng Aik Boon Danny. It summarizes his work experience including his current role as a Regional Sales Engineer at ABB T&B Business Unit since June 2015. It also outlines his previous roles as a Senior Sales Engineer at Phoenix Mecano S.E.A from 2012-2015 and as an Assistant and Sales Engineer at Ansac Technology from 2009-2012. The document lists his educational qualifications and skills.
Rahmat Hidayat is applying for a position and providing his resume. He has over 18 years of experience in piping, welding inspection, and project management in the oil and gas industry. He is seeking a new opportunity where he can apply his skills in safety, quality control, and completing projects on schedule.
PT. Berkah Hikari Alisha is an Indonesian mechanical engineering and manufacturing company established in 2020. The company aims to be a trusted problem solving partner for customers through high quality, on-time delivery and reasonable costs. PT. Berkah Hikari Alisha provides services including design and manufacturing of equipment, mechanical installation, and design assistance. The company's vision is to contribute to the development of industrial mechanical engineering through speedy, precise, and strong work.
Bhargav Thakkar has over 13 years of experience in mechanical and utility roles in the petrochemical, oil and gas, energy, and textile industries. He currently works as an AGM of Project and Technical Services at Inditech International, where he oversees projects involving machinery erection, commissioning, and maintenance. Some of the key projects he has worked on involve POY/FDY/PA6 machinery. He has expertise in planning, maintenance, troubleshooting, and commissioning of various process equipment and utilities including compressors, pumps, chillers, cooling towers, and more.
The document provides an overview of Engineering Projects (India) Ltd (EPIL) and summarizes an internship report on a construction project completed by EPIL. It describes EPIL's history, vision, services, and projects undertaken. It then summarizes a regional office building project for the Employers State Insurance Corporation, including project details, site layout, contractors involved, and current status in finishing stage.
Md. Al Amin has over 8 years of experience in electrical engineering and maintenance roles. He currently works as an Engineer for Electro Group in Dhaka, Bangladesh, where he is responsible for generator maintenance, project coordination, and reporting. Previously, he worked as an Assistant Engineer for Prime Textile Spinning Mills Ltd. where he managed electrical maintenance, troubleshooting, and repair work. Md. Al Amin holds a BSc in Electrical Engineering and diplomas in Electronics Engineering and other technical training.
This document outlines a 16-stage fabrication and erection sequence for a tank storage terminal in Karimun, Indonesia. Stage 1 involves laying the annular plate and bottom plate foundations. Stages 2-4 continue bottom plate laying. Stage 5 completes bottom plate erection and begins the first shell course. Stages 6-8 erect the second shell course and add stairways. Stages 9-14 jack up layers and erect additional shell courses. Stage 15 completes shell laying. Stage 16 involves erecting the roof.
This document provides a business plan for a Dosa restaurant. It outlines objectives to keep food costs below 35% of revenue and expand marketing. The plan details the restaurant's mission to provide excellent food and service. It will feature indoor and outdoor seating with a unique Indian design. The menu will focus on dosas and other South Indian cuisine. The plan analyzes the target market and identifies competitors. It proposes strategies for marketing, sales, management, hiring staff, and financial projections.
The document provides an executive summary for a proposed coffee shop called Coffee Spot Café to be opened in Connersville, Indiana. The café will offer a variety of coffee drinks, teas, baked goods and breakfast sandwiches. The goals are to become well-known locally and potentially expand to other locations or add catering. The SWOT analysis identifies strengths, weaknesses, opportunities and threats. Financial needs are estimated and the business will be run as a sole proprietorship. Market research identifies the target market and competition. A marketing strategy and break-even analysis are also included.
The Unify Company is a new centralized web development company in the Caraga Region of the Philippines. It is led by CEO Ferdinand Balbin and aims to create a website that promotes tourism and allows local businesses to advertise their products and services. This centralized portal will help overcome the challenges of individual business websites having low visibility. The company works with the Department of Tourism to distribute promotional materials and hopes to generate revenue through business subscriptions to the website.
PT. DENKI ENGINEERING provides general contractor and supplier services for commercial and industrial projects. Their vision is to be a competitive, reliable company that can perform synergies with others and become a global construction company. Their mission is to provide engineering services professionally for customer satisfaction and stakeholder prosperity. They have experience with various electrical, mechanical, and construction projects since 2009 for companies across industries.
This document provides information about APS Lanka (Pvt) Ltd, an electrical and mechanical services company in Sri Lanka. It outlines their vision, mission, quality and safety policies. It also includes details of their management team, project teams, recent and completed projects which involve electrical, extra low voltage, plumbing and drainage installations. Their vision is to become the top quality electrical engineering services provider in Sri Lanka and their mission is to deliver full turnkey solutions through excellence, technology and effective partnerships.
PT. RPM was established in 1989 and distributes hardware, machinery, and industrial equipment across Indonesia. It has eight sister companies and aims to be a leading supplier of high-quality products and services. The company strives for excellence through its commitment to on-time deliveries, expanding product offerings, and improving employee performance.
This document is a curriculum vitae for Moch Zainal Abidin that includes his personal details, educational background, training and certificates, computer abilities, work experience, and projects. It shows that he has over 10 years of experience in structure design, electrical and instrument drafting, and vessel drafting for oil and gas projects in Indonesia and Malaysia. His most recent role was as a structure designer for SAIPEM working on projects in Angola and Namibia.
Bellibatubara has over 11 years of experience in mechanical engineering, quality control inspection, and project management. He has worked for several companies in roles such as operator, administrator, supervisor, and marketer. His background includes inspecting power plant construction, operating water turbines, managing warehouse administration, and supervising telecommunications infrastructure installation projects.
Sulhendra is an Indonesian electrical engineer seeking new opportunities. He has over 10 years of experience in quality control, production, and installation roles in various industries including oil and gas, electronics, and telecommunications. Sulhendra holds a Bachelor's degree in Electrical Engineering and various welding and quality management certifications. He is proficient in English, Indonesian, and Microsoft Office programs.
SINBERY CORPORATION SDN BHD (SCSB) is an electrical and instrumentation services company founded in 1990 in Malaysia. It provides services to oil and gas, petrochemical, and power generation facilities. SCSB has grown over 13 years through participation in many projects, developing an experienced team and fleet of equipment. It aims to provide comprehensive value-added products and services to meet client needs. The company profile provides details on SCSB's capabilities, projects, clients, safety records, and past experience.
MK Tech Engineering & Contractors provides construction services with skilled staff who have industry experience. They work closely with clients and other organizations to understand project needs. The company aims to deliver quality, cost-effective, and reliable products and services to customers and create value for stakeholders. They have experience in mechanical, electrical, and other sectors on various power, industrial, and chemical plant projects.
This document contains personal and employment details of Ng Aik Boon Danny. It summarizes his work experience including his current role as a Regional Sales Engineer at ABB T&B Business Unit since June 2015. It also outlines his previous roles as a Senior Sales Engineer at Phoenix Mecano S.E.A from 2012-2015 and as an Assistant and Sales Engineer at Ansac Technology from 2009-2012. The document lists his educational qualifications and skills.
Rahmat Hidayat is applying for a position and providing his resume. He has over 18 years of experience in piping, welding inspection, and project management in the oil and gas industry. He is seeking a new opportunity where he can apply his skills in safety, quality control, and completing projects on schedule.
PT. Berkah Hikari Alisha is an Indonesian mechanical engineering and manufacturing company established in 2020. The company aims to be a trusted problem solving partner for customers through high quality, on-time delivery and reasonable costs. PT. Berkah Hikari Alisha provides services including design and manufacturing of equipment, mechanical installation, and design assistance. The company's vision is to contribute to the development of industrial mechanical engineering through speedy, precise, and strong work.
Bhargav Thakkar has over 13 years of experience in mechanical and utility roles in the petrochemical, oil and gas, energy, and textile industries. He currently works as an AGM of Project and Technical Services at Inditech International, where he oversees projects involving machinery erection, commissioning, and maintenance. Some of the key projects he has worked on involve POY/FDY/PA6 machinery. He has expertise in planning, maintenance, troubleshooting, and commissioning of various process equipment and utilities including compressors, pumps, chillers, cooling towers, and more.
The document provides an overview of Engineering Projects (India) Ltd (EPIL) and summarizes an internship report on a construction project completed by EPIL. It describes EPIL's history, vision, services, and projects undertaken. It then summarizes a regional office building project for the Employers State Insurance Corporation, including project details, site layout, contractors involved, and current status in finishing stage.
Md. Al Amin has over 8 years of experience in electrical engineering and maintenance roles. He currently works as an Engineer for Electro Group in Dhaka, Bangladesh, where he is responsible for generator maintenance, project coordination, and reporting. Previously, he worked as an Assistant Engineer for Prime Textile Spinning Mills Ltd. where he managed electrical maintenance, troubleshooting, and repair work. Md. Al Amin holds a BSc in Electrical Engineering and diplomas in Electronics Engineering and other technical training.
Mani Engineers Pune is an engineering design and services company established in 2013 in Pune, India. It provides coordinated mechanical, electrical, plumbing, fire protection, and special systems services for building projects. The company has offices in Maharashtra and Uttar Pradesh and has completed projects for clients such as Ryan International School, Schindler India, and Perkins Ltd. It is currently working on projects including a BSF training center, a Raman Group hotel, and fire and gas systems for Sharp Engineers.
The document provides information about Austin Engineering Company Limited (AEC), including:
1. AEC is an Indian manufacturer of bearings established in 1973 that has expanded to produce over 4,500 bearing varieties for domestic and international markets.
2. The production process at AEC involves purchasing raw materials, testing materials, grinding and shaping components, assembly, inspection and packaging before storage and distribution.
3. AEC has grown over the years and now has ISO certifications, a subsidiary in the US, and supplies bearings to major domestic and international original equipment manufacturers.
Hendra Mai Mulkis has over 11 years of experience in instrument commissioning, calibration, and troubleshooting for various construction and production projects. He has worked on offshore platforms, FPSOs, refineries, and other process facilities. Some of the companies he has worked with include PT Angkasa Engineers Indonesia, PT Cegelec Supply, and CV Mini Indah. His experience spans projects in Indonesia, Ghana, and India.
Md. Mustafijur Rahman is an Electrical and Electronics Engineer seeking a position where he can utilize over 3 years of experience in planning, operating, and maintaining electrical systems. He holds a Bachelor's degree in Electrical and Electronics Engineering and has worked for several companies in maintenance engineering and project planning roles. His skills include AutoCAD, Revit, programming, and he is proficient in English.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
An improved modulation technique suitable for a three level flying capacitor ...IJECEIAES
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
3. PT OODS ERA MANDIRI was establish on 13 January 2007
Started from small office surrounding Batam Centre with fully
organize by 4 persons skilled and expert on Mechanical,
piping, civil and electric instrument, General Trading, General
Contractor , Training & Consultan, Business Partner
The company is still growing, and will always continue to
grow, because for us, there's no end in improving the business
Enhance the quality of productivity, we also consider for
perfect schedule time as per our commitment for highly
regarded customer satisfaction.
PT OODS ERA MANDIRI was establish on 13 January 2007
Started from small office surrounding Batam Centre with fully
organize by 4 persons skilled and expert on Mechanical,
piping, civil and electric instrument, General Trading, General
Contractor , Training & Consultan, Business Partner
The company is still growing, and will always continue to
grow, because for us, there's no end in improving the business
Enhance the quality of productivity, we also consider for
perfect schedule time as per our commitment for highly
regarded customer satisfaction.
4. Vision
To be one of the leading companies in the civil, mechanical and electrical, General
Trading, Consultant & Bussiness Partner construction in Indoensia and by providing world
class equipments and through effective, efficient and excellent service.
Mission
1. Continuously improving the capability and quality of our highly innovative
productivity.
2. Providing the best service for our customers to achieve maximum satisfaction.
3. Highly committed in establishing excellent partnership with our business partners
Services & Support
Using our cutting edge technology working along with experienced qualified engineers, PT
OODS ERA MANDIRI offers our customers with a variety of technical services and
supports.
Vision
To be one of the leading companies in the civil, mechanical and electrical, General
Trading, Consultant & Bussiness Partner construction in Indoensia and by providing world
class equipments and through effective, efficient and excellent service.
Mission
1. Continuously improving the capability and quality of our highly innovative
productivity.
2. Providing the best service for our customers to achieve maximum satisfaction.
3. Highly committed in establishing excellent partnership with our business partners
Services & Support
Using our cutting edge technology working along with experienced qualified engineers, PT
OODS ERA MANDIRI offers our customers with a variety of technical services and
supports.
5. • Akta Notaris: No.01/ 01 October 2010
• izin Usaha (SIUP): No.0585/ Perindag-BTM/PMXI/2010(rev No.01031/Perindag-BTM/PK/V/2012
• Tanda Daftar Perusahaan (TDP): No. 041017409048(rev. No. 33.10.170.09048)
• Dephumham-RI: No. AHU-00800951.AHA.01.09. Tahun 2010
• Nomor Pokok Wajib Pajak (NPWP): No. 03.095.377.2-215.000
• Surat Keterangan Domisili (SKDU): No. 08/DOM/517/BK/X/2010 (rev. Nomor
100/DOM/517/BK/IV/2012)
• Keanggotaan AKEI –Association of Indonesia Electrical Contractors) No: 06.01.458.G2.2013
• Lembaga pengembangan Jasa Konstruksi- Construction service Development Board No.
000255-10/ASTTI/SKA/IV/2013
• LPJK-Sertifikat Badan Usaha Jasa Pelaksana Konstruksi
• No Registrasi: 2-2071-4-123-1-31-353076
• Izin Usaha Jasa Konstruksi Nasional PEMKO Batam No. 1.2171.2.00739.353076
• Akta Notaris: No.01/ 01 October 2010
• izin Usaha (SIUP): No.0585/ Perindag-BTM/PMXI/2010(rev No.01031/Perindag-BTM/PK/V/2012
• Tanda Daftar Perusahaan (TDP): No. 041017409048(rev. No. 33.10.170.09048)
• Dephumham-RI: No. AHU-00800951.AHA.01.09. Tahun 2010
• Nomor Pokok Wajib Pajak (NPWP): No. 03.095.377.2-215.000
• Surat Keterangan Domisili (SKDU): No. 08/DOM/517/BK/X/2010 (rev. Nomor
100/DOM/517/BK/IV/2012)
• Keanggotaan AKEI –Association of Indonesia Electrical Contractors) No: 06.01.458.G2.2013
• Lembaga pengembangan Jasa Konstruksi- Construction service Development Board No.
000255-10/ASTTI/SKA/IV/2013
• LPJK-Sertifikat Badan Usaha Jasa Pelaksana Konstruksi
• No Registrasi: 2-2071-4-123-1-31-353076
• Izin Usaha Jasa Konstruksi Nasional PEMKO Batam No. 1.2171.2.00739.353076
7. Corporate Manager: Mr Fandy
General Manager: Mr. Edo Permana,
Operational Manager: Mr. Bintang,ST
Regional Sales Manager: Mr. Franky Siregar
Accounting & Financial Manager: Mrs. Ernawati Wiwik
Business Plan Manager: Ilmansir
HRD Manager: Ruth Nasya
Corporate Manager: Mr Fandy
General Manager: Mr. Edo Permana,
Operational Manager: Mr. Bintang,ST
Regional Sales Manager: Mr. Franky Siregar
Accounting & Financial Manager: Mrs. Ernawati Wiwik
Business Plan Manager: Ilmansir
HRD Manager: Ruth Nasya
8. 1. ISO 9001;2008 : IRCA External Lead Auditor by TUV Rheinland, German
2. ISO 9001;2004 Internal Auditor by AJA, Singapore
3. ISO 14001;2004: Internal Auditor by AJA, Singapore
4. OHSAS 18001;2007: IRCA External Lead Auditor by Neville & Clarck, England
5. SMK3 Auditor by Menakertrans-RI
6. AK3U by Menakertrans-RI
7. K3 Elecrtical Specialist by Menakertrans-RI
8. K3 Chemical Specialist by Menakertrans-RI
For: Mr. Fandy Iood
As a Management Representative
Passport No: T 414880
1. ISO 9001;2008 : IRCA External Lead Auditor by TUV Rheinland, German
2. ISO 9001;2004 Internal Auditor by AJA, Singapore
3. ISO 14001;2004: Internal Auditor by AJA, Singapore
4. OHSAS 18001;2007: IRCA External Lead Auditor by Neville & Clarck, England
5. SMK3 Auditor by Menakertrans-RI
6. AK3U by Menakertrans-RI
7. K3 Elecrtical Specialist by Menakertrans-RI
8. K3 Chemical Specialist by Menakertrans-RI
For: Mr. Fandy Iood
As a Management Representative
Passport No: T 414880
12. Value Consumen/ Client
No. Company Name Description Location
1 Fu-Tai Engineering, Co Ltd Electrical & Instrument Taiwan
2 PT. Holcim Indonesia ME & Instrument Batam Batam- Indonesia
3. PT. Holcim Indonesia Electrical & Instrument Perawang
4. HyundaiHeavy Industries, Co Ltd General Contractor Korea Selatan
5. PT. Heat Exchanger Indonesia General Contractor Batam-Indonesia
6. PT. Bredero Shaw General Contractor Batam-Indonesia
7 NorthLab, Pte Ltd Electrical & Instruments Singapore
8 PT. Glopack, Indonesia M & E Project Batam-Indonesia
9 PT. Apipa Indonesia Electrical project Batam-Indonesia
10 PT. Jade Micron Batam Electrical Consultant Batam-Indonesia
11 PT. Yabisa Sukses Mandiri Civil & Electrical Project Batam-Indonesia
12 PT. Global Mandira Sakti M & EProject Jakarta- Indonesia
13 CPI Industry, Ltd Electrical Project Thailand
14 Cemtech,Co. Ltd Electrical & Mechanical Project Thailand
15 PT. Teknik Umum Engineering Consultant Jakarta- Indonesia
16 PT. Utomo Ladju General Contractor Jakarta- Indonesia
17 Proserv Batam E&I oil and Gas Batam-indonesia
18 PT. Dhiva Sarana Metal E&I oil and Gas Batam-Indonesia
19 FU-TAI Engineering, Co.,Ltd Electrical & Instrument Taiwan
20 PT. Cemindo Gemilang (Semen
Merah Putih)
Cement Grinding Plan E&I Cilegon-Indonesia
21 Others…..
Value Consumen/ Client
No. Company Name Description Location
1 Fu-Tai Engineering, Co Ltd Electrical & Instrument Taiwan
2 PT. Holcim Indonesia ME & Instrument Batam Batam- Indonesia
3. PT. Holcim Indonesia Electrical & Instrument Perawang
4. HyundaiHeavy Industries, Co Ltd General Contractor Korea Selatan
5. PT. Heat Exchanger Indonesia General Contractor Batam-Indonesia
6. PT. Bredero Shaw General Contractor Batam-Indonesia
7 NorthLab, Pte Ltd Electrical & Instruments Singapore
8 PT. Glopack, Indonesia M & E Project Batam-Indonesia
9 PT. Apipa Indonesia Electrical project Batam-Indonesia
10 PT. Jade Micron Batam Electrical Consultant Batam-Indonesia
11 PT. Yabisa Sukses Mandiri Civil & Electrical Project Batam-Indonesia
12 PT. Global Mandira Sakti M & EProject Jakarta- Indonesia
13 CPI Industry, Ltd Electrical Project Thailand
14 Cemtech,Co. Ltd Electrical & Mechanical Project Thailand
15 PT. Teknik Umum Engineering Consultant Jakarta- Indonesia
16 PT. Utomo Ladju General Contractor Jakarta- Indonesia
17 Proserv Batam E&I oil and Gas Batam-indonesia
18 PT. Dhiva Sarana Metal E&I oil and Gas Batam-Indonesia
19 FU-TAI Engineering, Co.,Ltd Electrical & Instrument Taiwan
20 PT. Cemindo Gemilang (Semen
Merah Putih)
Cement Grinding Plan E&I Cilegon-Indonesia
21 Others…..
13.
14. Workshop & Storage
Komp. Telaga Indah Blok M No.13, Batam, Kepri
Telp: 0778-7270222
Office:
Jalan Abulyatama, Ruko Manalagi Blok C No.10 Batam Kota, 29464, batam, Indonesia
Telp: +62778-475467, 7288919, Fax: +62778-475467
Batam: Mr. Fandy: Hp 082173332233 (Email: fandyiood@oodsgroup.com or
fandyiood@yahoo.com)
Website: www.oodsgroup.com
Contact Number & Email:
Branch Office (JABODATABEK AREA)
Komp. Darmawangsa, Blok Kedaton, Blok B No.18, BEKASI-Jawa barat, Indonesia
15. 1. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.513.006xxx
Curency: Rupiah (IDR)
Swif code: IBBK IDJA
2. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.034.524xxx
Curency: Singapore Dollar (SGD)
Swif code: IBBK IDJA
4. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.513.700xxx
Curency: America Dollar (USD)
Swif code: IBBK IDJA
3. Bank Name: Bank BTN Syariah
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 7081001xxx
CurencyRupiah (IDR)
16. 1. PT. Crisand Brother
2. CV. Oods Enterprise
3. CV. Oods Bintang Engineering
4. Oods Jaya Abadi Technic
5. PT. Malelo Andalan Logistik
6. CV. Indonesia Service Academy
(INSA)
Oods Group:
(member of the OODS Group of companies)
Website: www.oodsgroup.com
1. PT. Crisand Brother
2. CV. Oods Enterprise
3. CV. Oods Bintang Engineering
4. Oods Jaya Abadi Technic
5. PT. Malelo Andalan Logistik
6. CV. Indonesia Service Academy
(INSA)
17. DESCRIPTION PHOTO
Cement Factory in Batam,
Mechanical, piping and electrical
installation
Installation Weight Bridge, started
from coulomb preparation,
erection, concrete filling until
setting weighing indicator.
1 2 2
3 4
18. DESCRIPTION PHOTO
AERATION SYSTEM for cement
loading
Fabrication – Setup – Testing
Installation AIR COMPRESSOR
System with piping complete
20. DESCRIPTION PHOTO
Installation Ventomatic Packer
machine, MC order from Italy and
handover to Client with fully
commissioning
Tank for Main air compressor
Fabrication-testing
21. DESCRIPTION PHOTO
Dusting system, fabrication –
erection and installation
PIPING SYSTEM, Fabrication-
erection and installation, from Jetty
to Main silo