The document discusses the design and development of customized ankle prostheses using 3D printing and modeling techniques. It summarizes the limitations of current ankle replacement implants and describes the development of a new design with anatomy-inspired geometry. Methods for imaging ankles with CT, MRI and other techniques are presented to create 3D models. Designs for the bone-implant interface are explored using trabecular metal and other materials meant to encourage bone ingrowth. Prototypes are manufactured using selective laser melting and tested for toxicity and osteogenesis with cell studies. The summaries provide an overview of the project to design and develop customized 3D printed ankle implants.
CUSTOM IMPLANTS
Research, Regenerative Medicine and Personalized Surgery at Rizzoli Orthopedic Institute
CUSTOM ENDOPROTESI: Design of patient-specific ankle prosthesis for replacement surgery obtained through metal alloys 3D printing and polyethylene
Design of customized endoprosthesis for ankle through geometric-biomechanical design and 3D printing technology to improve joint surfaces replacement by artificial endoprosthesis
Total knee replacement for patient with retained implant and metalSurgiNovi
A 45 year old patient suffering from advanced left knee osteoarthritis.The patient had a retained implant and could not perform knee replacement with conventional techniques. The patient also suffers from an old malunited fracture tibial plateau, an old united fracture shaft femur fixed by IL nail, and an old ACL and PCL injury. With the help of SurgiNovi patient-specific templates, the patient was finally able to do a knee replacement surgery in which otherwise could have been impossible.
How SurgiScol guide Works for Scoliosis Correction SurgiNovi
SurgiScol PST (patient-specific template) is a pedicle screw pair fixation guide used for Scoliosis correction that consists of a set of 12 parts (T1 to T12). The 12 parts are provided for the thoracic with a unique shape characterized by two transversal ribs to secure the relay of the PST guide over the spinous process, transvers process and the articular surface. The surgeon is given a choice to select the number of PST’s needed in surgery depending on a preoperative planning.
Manufacturer of HIP Prosthesis and other Orthopedic implants & Instruments umesh_narang
Orthopedic Implants - We are manufacturer and suppliers of Orthopaedic Implants and Instruments. Narang Medical Ltd. is India based Orthopedic Implant Company... Orthopedic Implants, Orthopaedic Implants Manufacturer, Orthopedic Implants Suppliers, Orthopaedic Implants Company, India.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
CUSTOM IMPLANTS
Research, Regenerative Medicine and Personalized Surgery at Rizzoli Orthopedic Institute
CUSTOM ENDOPROTESI: Design of patient-specific ankle prosthesis for replacement surgery obtained through metal alloys 3D printing and polyethylene
Design of customized endoprosthesis for ankle through geometric-biomechanical design and 3D printing technology to improve joint surfaces replacement by artificial endoprosthesis
Total knee replacement for patient with retained implant and metalSurgiNovi
A 45 year old patient suffering from advanced left knee osteoarthritis.The patient had a retained implant and could not perform knee replacement with conventional techniques. The patient also suffers from an old malunited fracture tibial plateau, an old united fracture shaft femur fixed by IL nail, and an old ACL and PCL injury. With the help of SurgiNovi patient-specific templates, the patient was finally able to do a knee replacement surgery in which otherwise could have been impossible.
How SurgiScol guide Works for Scoliosis Correction SurgiNovi
SurgiScol PST (patient-specific template) is a pedicle screw pair fixation guide used for Scoliosis correction that consists of a set of 12 parts (T1 to T12). The 12 parts are provided for the thoracic with a unique shape characterized by two transversal ribs to secure the relay of the PST guide over the spinous process, transvers process and the articular surface. The surgeon is given a choice to select the number of PST’s needed in surgery depending on a preoperative planning.
Manufacturer of HIP Prosthesis and other Orthopedic implants & Instruments umesh_narang
Orthopedic Implants - We are manufacturer and suppliers of Orthopaedic Implants and Instruments. Narang Medical Ltd. is India based Orthopedic Implant Company... Orthopedic Implants, Orthopaedic Implants Manufacturer, Orthopedic Implants Suppliers, Orthopaedic Implants Company, India.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Orthodelhi Center of Orthopedics & Joint Replacement specializes in the treatment of musculo-skeletal system disorders. It is at par with international standards and offers Minimally Invasive Surgery (MIS) for Joint Reconstruction. The Centre is manned by experienced and highly skilled Orthopedic surgeons that offer MIS solutions for Total Knee Replacement, Hip Replacement. The center carries out all kinds of limb salvage surgeries, as well as correctional procedures for deformities. Manav Hospital also offers Sports injury treatments and number of rehabilitation programs. These services include arthroscopic procedures for shoulder and knee injuries with dedicated domiciliary rehabilitation and dedicated post surgery services. The Center also provides treatment for spinal ailments which includes Minimal Invasive Spine Surgery (MISS), Spinal Fusion Procedures and Mobilization procedures which are delivered with the help of most advanced techniques in the area.
Orthopedic Implants & Instruments: Quality and trust are two major factors that an Orthopedic surgeon takes into consideration while selecting orthopedic implants. Orthopedic experts all over the world not only trust NET Orthopedic Implants but also recommends them to the fellow professionals with confidence because of their high quality. Narang Medical Limited has its own state-of-the-art-factory that manufactures Orthopedic Implants and Instruments. The Orthopedic Implants factory is perhaps the biggest (skilled production staff of about 250 people) and most well equipped in India. We, as a leading Orthopaedic Implants manufacturer and Orthopaedic Implant suppliers, have become a top orthopedic company. Narang Medical Ltd. is an India based company. http://www.orthopaedic-implants.com
Global CBCT Dental Imaging Market: Information by Type of Detector (Flat Panel Detector and Image Intensifier), Application (Dental Implants, Orthodontics, Endodontics and Others), End User (Hospitals & Dental Clinics, Academics and Research Institutes and others) and Region (Americas, Europe, Asia-Pacific and Middle East & Africa) - Forecast till 2027
ΣΥΝΔΕΣΜΟΠΛΑΣΤΙΚΗ ΠΡΟΣΘΙΟΥ ΧΙΑΣΤΟΥ ΣΥΝΔΕΣΜΟΥ ΜΕ ΜΟΝΗ ΔΕΣΜΗ ΣΕ ΑΝΑΤΟΜΙΚΗ ΘΕΣΗ. ...STAVROS ALEVROGIANNIS
(Παρουσίαση σε Διεθνές Συνέδριο Εταιρείας Αρθροσκόπησης & Χειρουργικής Γόνατος της Πολωνίας, POZNAN 2011).
FREE HAND NOVEL ANATOMIC SINGLE BAND TECHNIQUE FOR ACLR
(X/O BUTTON,CONMED,LINVATEC,USA).PRELIMINARY RESULTS.
(POZNAN 2011)
6° Presentazione del workshop finale del progetto Custom Implants
Custom-Endoprotesi
Le superfici articolari affette da gravi degenerazioni sono sostituite da endoprotesi artificiali. L’attuale limitatissimo numero di taglie disponibili ingenera importanti problemi tra la protesi e l’osso ospitante, che porta spesso al fallimento della sostituzione. Con i nuovi strumenti a disposizione (immagini biomedicali, software di ricostruzione, modelli biomeccanici, ecc.) e la recente tecnologia di stampa-3D si sono progettate nuove protesi articolari personalizzate per la caviglia.
Principali settori indirizzati: Farmaceutico, biomedico, chimico, biologico, ingegneria tissutale, clinico
Sito web del progetto: www.custom-implants.it
Orthodelhi Center of Orthopedics & Joint Replacement specializes in the treatment of musculo-skeletal system disorders. It is at par with international standards and offers Minimally Invasive Surgery (MIS) for Joint Reconstruction. The Centre is manned by experienced and highly skilled Orthopedic surgeons that offer MIS solutions for Total Knee Replacement, Hip Replacement. The center carries out all kinds of limb salvage surgeries, as well as correctional procedures for deformities. Manav Hospital also offers Sports injury treatments and number of rehabilitation programs. These services include arthroscopic procedures for shoulder and knee injuries with dedicated domiciliary rehabilitation and dedicated post surgery services. The Center also provides treatment for spinal ailments which includes Minimal Invasive Spine Surgery (MISS), Spinal Fusion Procedures and Mobilization procedures which are delivered with the help of most advanced techniques in the area.
Orthopedic Implants & Instruments: Quality and trust are two major factors that an Orthopedic surgeon takes into consideration while selecting orthopedic implants. Orthopedic experts all over the world not only trust NET Orthopedic Implants but also recommends them to the fellow professionals with confidence because of their high quality. Narang Medical Limited has its own state-of-the-art-factory that manufactures Orthopedic Implants and Instruments. The Orthopedic Implants factory is perhaps the biggest (skilled production staff of about 250 people) and most well equipped in India. We, as a leading Orthopaedic Implants manufacturer and Orthopaedic Implant suppliers, have become a top orthopedic company. Narang Medical Ltd. is an India based company. http://www.orthopaedic-implants.com
Global CBCT Dental Imaging Market: Information by Type of Detector (Flat Panel Detector and Image Intensifier), Application (Dental Implants, Orthodontics, Endodontics and Others), End User (Hospitals & Dental Clinics, Academics and Research Institutes and others) and Region (Americas, Europe, Asia-Pacific and Middle East & Africa) - Forecast till 2027
ΣΥΝΔΕΣΜΟΠΛΑΣΤΙΚΗ ΠΡΟΣΘΙΟΥ ΧΙΑΣΤΟΥ ΣΥΝΔΕΣΜΟΥ ΜΕ ΜΟΝΗ ΔΕΣΜΗ ΣΕ ΑΝΑΤΟΜΙΚΗ ΘΕΣΗ. ...STAVROS ALEVROGIANNIS
(Παρουσίαση σε Διεθνές Συνέδριο Εταιρείας Αρθροσκόπησης & Χειρουργικής Γόνατος της Πολωνίας, POZNAN 2011).
FREE HAND NOVEL ANATOMIC SINGLE BAND TECHNIQUE FOR ACLR
(X/O BUTTON,CONMED,LINVATEC,USA).PRELIMINARY RESULTS.
(POZNAN 2011)
6° Presentazione del workshop finale del progetto Custom Implants
Custom-Endoprotesi
Le superfici articolari affette da gravi degenerazioni sono sostituite da endoprotesi artificiali. L’attuale limitatissimo numero di taglie disponibili ingenera importanti problemi tra la protesi e l’osso ospitante, che porta spesso al fallimento della sostituzione. Con i nuovi strumenti a disposizione (immagini biomedicali, software di ricostruzione, modelli biomeccanici, ecc.) e la recente tecnologia di stampa-3D si sono progettate nuove protesi articolari personalizzate per la caviglia.
Principali settori indirizzati: Farmaceutico, biomedico, chimico, biologico, ingegneria tissutale, clinico
Sito web del progetto: www.custom-implants.it
The AAA-Triple A total ankle arthroplastyRon Woering
Total Ankle Arthroplasty has become a viable option for selected patient with an end-stage ankle osteoarthritis. This presentation presents the product details of the AAA Triple-A ankle arthroplasty
“CUSTOM IMPLANTS” POR-FESR project addresses different aspects and technologies within the customized precision surgery. Its main objective is to make custom implantable products accessible to patients: in the short term, with the processing of donor tissues and with custom metal prostheses, in the medium term, with the refinement of 3D printing technology for custom scaffolds and the related magnetic-cellularisation.
Project web site: www.custom-implants.it
Presentations and videos: cerr.eu/what-s-going-on/357-materiali-dei-seminari-disponibili-online
Further materials: www.slideshare.net/CERRicerca
Inside you will find a large variety of Conical Connection & Internal Hex Connection products, compatible with leading systems in the market.
dibay™ - YOUR ONLINE IMPLANT SYSTEM
This journal club presentation includes an recent article published regarding use of tantalum implants in dentistry. although it has various uses in orthopedics, it has failed to catch on in dentistry. This new innovative technique is fascinating to learn about.
the full presentation and its related articles are available on request. Mail me at apurvathampi@gmail.com
Name of organization: ABC Technologies, LLC Project participant No. 1120077 dated 3/20/2012
Innovation project name: Development and Productization of Orthopedic Trauma 3D Implants
Skolkovo Foundation Resident No. 414
Skolkovo Industrial Park Resident No. 14
Sarov Industrial Park Resident
OEMs and suppliers see promise in the ability of manufacturing and software to expand the use of custom implants in orthopaedics. Multiple companies are focused on the custom market. This session provides the surgeon perspective on these devices. What are the benefits? When should and shouldn't they be used? Will the market take off?
Similar to Custom Endoprotesi: Design e stampa 3D di protesi personalizzate per la caviglia (20)
Giovedì 6 giugno 2024 dalle ore 11:00 alle ore 12:00 si svolgerà il webinar di lancio a livello italiano delle seconda edizione delle opportunità di formazione del progetto CloudCamp4SMEs a disposizione per le Piccole e Medie Imprese a livello di cloud computing.
La seconda edizione dei corsi che partirà a giugno sarà indirizzata a:
Imprenditori
Dipendenti
Cloud Architect
Cloud Developer
Security Engineer
Security Engineer
System Operation
DevOps Engineer
I corsi sono aperti a tutte le PMI, erogati in lingua italiana e forniti a un prezzo agevolato grazie al supporto della Commissione Europea (programma Digital Europe).
Il progetto Europeo CloudCamp4SMEs è finalizzato a supportare le piccole e medie imprese (PMI) dei paesi dell’Unione Europea a rimanere all’avanguardia fornendo l’accesso a corsi di formazione di alta qualità e a basso costo, incentrati sulle competenze digitali richieste per le tecnologie e le soluzioni cloud.
Giovedì 30 maggio 2024 dalle ore 11:00 alle ore 12:00 si svolgerà il webinar di lancio a livello italiano delle seconda edizione delle opportunità di formazione del progetto CloudCamp4SMEs a disposizione per le Piccole e Medie Imprese a livello di cloud computing.
La seconda edizione dei corsi che partirà a giugno sarà indirizzata a:
Imprenditori
Dipendenti
Cloud Architect
Cloud Developer
Security Engineer
Security Engineer
System Operation
DevOps Engineer
I corsi sono aperti a tutte le PMI, erogati in lingua italiana e forniti a un prezzo agevolato grazie al supporto della Commissione Europea (programma Digital Europe).
Il progetto Europeo CloudCamp4SMEs è finalizzato a supportare le piccole e medie imprese (PMI) dei paesi dell’Unione Europea a rimanere all’avanguardia fornendo l’accesso a corsi di formazione di alta qualità e a basso costo, incentrati sulle competenze digitali richieste per le tecnologie e le soluzioni cloud.
Mercoledì 8 maggio 2024 dalle ore 9:30 alle ore 11:00 si è svolto presso Confindustria Emilia Area Centro (Via San Domenico 4, Bologna) la quarta tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Sesto intervento: Labanti e Nanni Industrie Grafiche
TESTIMONIANZA
Mercoledì 8 maggio 2024 dalle ore 9:30 alle ore 11:00 si è svolto presso Confindustria Emilia Area Centro (Via San Domenico 4, Bologna) la quarta tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Quinto intervento: Chimar
TESTIMONIANZA
Mercoledì 8 maggio 2024 dalle ore 9:30 alle ore 11:00 si è svolto presso Confindustria Emilia Area Centro (Via San Domenico 4, Bologna) la quarta tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Quarto intervento: Confindustria Emilia Area Centro, Confindustria Emilia-Romagna Ricerca
LE OPPORTUNITA' DEL PNRR PER L'INNOVAZIONE DIGITALE E SOSTENIBILE: I NUOVI SERVIZI SPECIALISTICI
Mercoledì 8 maggio 2024 dalle ore 9:30 alle ore 11:00 si è svolto presso Confindustria Emilia Area Centro (Via San Domenico 4, Bologna) la quarta tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Terzo intervento: Bi-Rex
INNOVAZIONI DIGITALI E SOSTENIBILI: LA DOPPIA TRANSIZIONE
Mercoledì 8 maggio 2024 dalle ore 9:30 alle ore 11:00 si svolgerà presso Confindustria Emila (Via San Domenico 4, 40124 Bologna) la quarta tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Le imprese potranno approfondire i nuovi servizi specialistici, a cui potranno accedere a condizioni agevolate grazie al PNRR, per configurare progetti volti a favorire innovazioni di prodotto, di processo od organizzativa.
Al tempo stesso potranno conoscere casi d’uso e buone pratiche di imprese (CHIMAR, Labanti e Nanni Industrie Grafiche, Eurocell) che, anche grazie al supporto del network Confindustria, hanno colto i vantaggi offerti dalle tecnologie digitali per realizzare transizioni innovative e sostenibili verso l’industria del futuro.
La tappa è organizzata da Confindustria Emilia Area Centro, in qualità di Antenna Territoriale, e Confindustria Emilia-Romagna Ricerca (Digital Innovation Hub Emilia-Romagna di Confindustria) nell’ambito del progetto bi-rex++ e in collaborazione con la rete Enterprise Europe Network.
La tappa sarà guidata dal tema “Innovazioni digitali e sostenibili: la doppia transizione” e si inserisce nel Roadshow regionale che prevede 5 tappe territoriali (da gennaio a giugno 2024).
Durante l’incontro vi sarà l’opportunità di confrontarsi con i referenti di Confindustria Emilia Area Centro a cui rivolgersi per accedere ai servizi.
I nuovi servizi proposti sono erogati nell’ambito di progetti finanziati dall’Unione Europea – Next Generation EU
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Quinto intervento: DNAPhone
TESTIMONIANZA
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Quarto intervento: FLO
TESTIMONIANZA
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Terzo intervento: GEA PROCOMAC
TESTIMONIANZA
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Secondo intervento: UNIONE PARMENSE DEGLI INDUSTRIALI e CONFINDUSTRIA EMILIA-ROMAGNA RICERCA
LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE:
I NUOVI SERVIZI SPECIALISTICI
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Primo intervento: SMILE-DIH
INNOVAZIONE DIGITALE: SIMULAZIONE E DIGITAL TWIN PER EFFICIENTARE I PROCESSI
OPERATIVI AZIENDALI
Webinar | CloudCamp4SMEs: le opportunità del cloud
computing per le piccole e medie imprese
Secondo intervento: Le opportunità di formazione per le Piccole e Medie Imprese
Il progetto CloudCamp4SMEs, finanziato dall’Unione Eropea, supporterà le piccole e medie imprese (PMI) dei paesi dell’Unione a rimanere all’avanguardia fornendo l’accesso a corsi di formazione di alta qualità e a basso costo, incentrati sulle competenze digitali richieste per le tecnologie e le soluzioni cloud.
Il progetto si impegna a offrire esperienze formative su misura per le PMI in 5 paesi pilota: Danimarca, Germania, Italia, Spagna e Polonia. I paesi pilota sono stati selezionati per coprire tutte le diverse fasi dell’innovazione a livello dell’UE, garantendo che la formazione risponda alle esigenze specifiche delle PMI in qualsiasi paese.
Webinar | CloudCamp4SMEs: le opportunità del cloud
computing per le piccole e medie imprese
Prima presentazione | Il progetto CloudCamp4SMEs
Il progetto CloudCamp4SMEs, finanziato dall’Unione Eropea, supporterà le piccole e medie imprese (PMI) dei paesi dell’Unione a rimanere all’avanguardia fornendo l’accesso a corsi di formazione di alta qualità e a basso costo, incentrati sulle competenze digitali richieste per le tecnologie e le soluzioni cloud.
Lunedì 18 marzo 2024 dalle ore 15:00 alle ore 16:30 si svolgerà presso Unione Parmense degli Industriali (Strada al Ponte Caprazucca 6/A, 43121 Parma) la terza tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Le imprese potranno approfondire i nuovi servizi specialistici, a cui potranno accedere a condizioni agevolate grazie al PNRR, per configurare progetti volti a favorire innovazioni di prodotto, di processo od organizzative.
Al tempo stesso potranno conoscere casi d’uso e buone pratiche di imprese (Flo, DNAPhone, GEA Procomac) che, anche grazie al supporto del network Confindustria, hanno colto i vantaggi offerti dalle tecnologie digitali per realizzare transizioni innovative e sostenibili verso l’industria del futuro.
La tappa è organizzata da Unione Parmense degli Industriali, in qualità di Antenna Territoriale, SMILE-DIH e Confindustria Emilia-Romagna Ricerca (Digital Innovation Hub Emilia-Romagna di Confindustria) nell’ambito del progetto BI-REX++ e in collaborazione con la rete Enterprise Europe Network.
La tappa sarà guidata dal tema “Innovazione digitale: simulazione e digital twin per efficientare i processi operativi aziendali” e si inserisce nel Roadshow regionale che prevede 5 tappe territoriali (da gennaio a maggio 2024).
Durante l’incontro vi sarà l’opportunità di confrontarsi con i referenti di Unione Parmense degli Industriali a cui rivolgersi per accedere ai servizi.
I nuovi servizi proposti sono erogati nell’ambito di progetti finanziati dall’Unione Europea – Next Generation EU
Venerdì 23 febbraio 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Confindustria Romagna (Via Punta di Ferro 2/A, Forlì) la seconda tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Terzo Intervento: GIGLIOLI PRODUCTION S.r.l.
TESTIMONIANZA
Venerdì 23 febbraio 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Confindustria Romagna (Via Punta di Ferro 2/A, Forlì) la seconda tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Terzo Intervento: BUCCHI S.r.l.
TESTIMONIANZA
Venerdì 23 febbraio 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Confindustria Romagna (Via Punta di Ferro 2/A, Forlì) la seconda tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Secondo Intervento: CONFINDUSTRIA
LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE:
I NUOVI SERVIZI SPECIALISTICI
Venerdì 23 febbraio 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Confindustria Romagna (Via Punta di Ferro 2/A, Forlì) la seconda tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Primo intervento: META
INNOVAZIONE DIGITALE: COME SVILUPPARE EFFICIENZA OPERATIVA NEI PROCESSI
AZIENDALI
Venerdì 23 febbraio 2024 dalle ore 15:00 alle ore 16:30 si è svolto presso Confindustria Romagna (Via Punta di Ferro 2/A, Forlì) la seconda tappa del Roadshow “VERSO L’INDUSTRIA DEL FUTURO: LE OPPORTUNITÀ DEL PNRR PER L’INNOVAZIONE DIGITALE E SOSTENIBILE” dedicato a presentare i nuovi servizi specialistici che le imprese avranno a disposizione nel 2024 e nel 2025 per realizzare percorsi verso l’innovazione, la digitalizzazione e la sostenibilità.
Quinto intervento: MIXER S.p.A.
TESTIMONIANZA
More from Confindustria Emilia-Romagna Ricerca (20)
These simplified slides by Dr. Sidra Arshad present an overview of the non-respiratory functions of the respiratory tract.
Learning objectives:
1. Enlist the non-respiratory functions of the respiratory tract
2. Briefly explain how these functions are carried out
3. Discuss the significance of dead space
4. Differentiate between minute ventilation and alveolar ventilation
5. Describe the cough and sneeze reflexes
Study Resources:
1. Chapter 39, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 34, Ganong’s Review of Medical Physiology, 26th edition
3. Chapter 17, Human Physiology by Lauralee Sherwood, 9th edition
4. Non-respiratory functions of the lungs https://academic.oup.com/bjaed/article/13/3/98/278874
- Video recording of this lecture in English language: https://youtu.be/lK81BzxMqdo
- Video recording of this lecture in Arabic language: https://youtu.be/Ve4P0COk9OI
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
Flu Vaccine Alert in Bangalore Karnatakaaddon Scans
As flu season approaches, health officials in Bangalore, Karnataka, are urging residents to get their flu vaccinations. The seasonal flu, while common, can lead to severe health complications, particularly for vulnerable populations such as young children, the elderly, and those with underlying health conditions.
Dr. Vidisha Kumari, a leading epidemiologist in Bangalore, emphasizes the importance of getting vaccinated. "The flu vaccine is our best defense against the influenza virus. It not only protects individuals but also helps prevent the spread of the virus in our communities," he says.
This year, the flu season is expected to coincide with a potential increase in other respiratory illnesses. The Karnataka Health Department has launched an awareness campaign highlighting the significance of flu vaccinations. They have set up multiple vaccination centers across Bangalore, making it convenient for residents to receive their shots.
To encourage widespread vaccination, the government is also collaborating with local schools, workplaces, and community centers to facilitate vaccination drives. Special attention is being given to ensuring that the vaccine is accessible to all, including marginalized communities who may have limited access to healthcare.
Residents are reminded that the flu vaccine is safe and effective. Common side effects are mild and may include soreness at the injection site, mild fever, or muscle aches. These side effects are generally short-lived and far less severe than the flu itself.
Healthcare providers are also stressing the importance of continuing COVID-19 precautions. Wearing masks, practicing good hand hygiene, and maintaining social distancing are still crucial, especially in crowded places.
Protect yourself and your loved ones by getting vaccinated. Together, we can help keep Bangalore healthy and safe this flu season. For more information on vaccination centers and schedules, residents can visit the Karnataka Health Department’s official website or follow their social media pages.
Stay informed, stay safe, and get your flu shot today!
Pulmonary Thromboembolism - etilogy, types, medical- Surgical and nursing man...VarunMahajani
Disruption of blood supply to lung alveoli due to blockage of one or more pulmonary blood vessels is called as Pulmonary thromboembolism. In this presentation we will discuss its causes, types and its management in depth.
Knee anatomy and clinical tests 2024.pdfvimalpl1234
This includes all relevant anatomy and clinical tests compiled from standard textbooks, Campbell,netter etc..It is comprehensive and best suited for orthopaedicians and orthopaedic residents.
Recomendações da OMS sobre cuidados maternos e neonatais para uma experiência pós-natal positiva.
Em consonância com os ODS – Objetivos do Desenvolvimento Sustentável e a Estratégia Global para a Saúde das Mulheres, Crianças e Adolescentes, e aplicando uma abordagem baseada nos direitos humanos, os esforços de cuidados pós-natais devem expandir-se para além da cobertura e da simples sobrevivência, de modo a incluir cuidados de qualidade.
Estas diretrizes visam melhorar a qualidade dos cuidados pós-natais essenciais e de rotina prestados às mulheres e aos recém-nascidos, com o objetivo final de melhorar a saúde e o bem-estar materno e neonatal.
Uma “experiência pós-natal positiva” é um resultado importante para todas as mulheres que dão à luz e para os seus recém-nascidos, estabelecendo as bases para a melhoria da saúde e do bem-estar a curto e longo prazo. Uma experiência pós-natal positiva é definida como aquela em que as mulheres, pessoas que gestam, os recém-nascidos, os casais, os pais, os cuidadores e as famílias recebem informação consistente, garantia e apoio de profissionais de saúde motivados; e onde um sistema de saúde flexível e com recursos reconheça as necessidades das mulheres e dos bebês e respeite o seu contexto cultural.
Estas diretrizes consolidadas apresentam algumas recomendações novas e já bem fundamentadas sobre cuidados pós-natais de rotina para mulheres e neonatos que recebem cuidados no pós-parto em unidades de saúde ou na comunidade, independentemente dos recursos disponíveis.
É fornecido um conjunto abrangente de recomendações para cuidados durante o período puerperal, com ênfase nos cuidados essenciais que todas as mulheres e recém-nascidos devem receber, e com a devida atenção à qualidade dos cuidados; isto é, a entrega e a experiência do cuidado recebido. Estas diretrizes atualizam e ampliam as recomendações da OMS de 2014 sobre cuidados pós-natais da mãe e do recém-nascido e complementam as atuais diretrizes da OMS sobre a gestão de complicações pós-natais.
O estabelecimento da amamentação e o manejo das principais intercorrências é contemplada.
Recomendamos muito.
Vamos discutir essas recomendações no nosso curso de pós-graduação em Aleitamento no Instituto Ciclos.
Esta publicação só está disponível em inglês até o momento.
Prof. Marcus Renato de Carvalho
www.agostodourado.com
NVBDCP.pptx Nation vector borne disease control programSapna Thakur
NVBDCP was launched in 2003-2004 . Vector-Borne Disease: Disease that results from an infection transmitted to humans and other animals by blood-feeding arthropods, such as mosquitoes, ticks, and fleas. Examples of vector-borne diseases include Dengue fever, West Nile Virus, Lyme disease, and malaria.
Explore natural remedies for syphilis treatment in Singapore. Discover alternative therapies, herbal remedies, and lifestyle changes that may complement conventional treatments. Learn about holistic approaches to managing syphilis symptoms and supporting overall health.
HOT NEW PRODUCT! BIG SALES FAST SHIPPING NOW FROM CHINA!! EU KU DB BK substit...GL Anaacs
Contact us if you are interested:
Email / Skype : kefaya1771@gmail.com
Threema: PXHY5PDH
New BATCH Ku !!! MUCH IN DEMAND FAST SALE EVERY BATCH HAPPY GOOD EFFECT BIG BATCH !
Contact me on Threema or skype to start big business!!
Hot-sale products:
NEW HOT EUTYLONE WHITE CRYSTAL!!
5cl-adba precursor (semi finished )
5cl-adba raw materials
ADBB precursor (semi finished )
ADBB raw materials
APVP powder
5fadb/4f-adb
Jwh018 / Jwh210
Eutylone crystal
Protonitazene (hydrochloride) CAS: 119276-01-6
Flubrotizolam CAS: 57801-95-3
Metonitazene CAS: 14680-51-4
Payment terms: Western Union,MoneyGram,Bitcoin or USDT.
Deliver Time: Usually 7-15days
Shipping method: FedEx, TNT, DHL,UPS etc.Our deliveries are 100% safe, fast, reliable and discreet.
Samples will be sent for your evaluation!If you are interested in, please contact me, let's talk details.
We specializes in exporting high quality Research chemical, medical intermediate, Pharmaceutical chemicals and so on. Products are exported to USA, Canada, France, Korea, Japan,Russia, Southeast Asia and other countries.
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?bkling
Are you curious about what’s new in cervical cancer research or unsure what the findings mean? Join Dr. Emily Ko, a gynecologic oncologist at Penn Medicine, to learn about the latest updates from the Society of Gynecologic Oncology (SGO) 2024 Annual Meeting on Women’s Cancer. Dr. Ko will discuss what the research presented at the conference means for you and answer your questions about the new developments.
Ozempic: Preoperative Management of Patients on GLP-1 Receptor Agonists Saeid Safari
Preoperative Management of Patients on GLP-1 Receptor Agonists like Ozempic and Semiglutide
ASA GUIDELINE
NYSORA Guideline
2 Case Reports of Gastric Ultrasound
New Directions in Targeted Therapeutic Approaches for Older Adults With Mantl...i3 Health
i3 Health is pleased to make the speaker slides from this activity available for use as a non-accredited self-study or teaching resource.
This slide deck presented by Dr. Kami Maddocks, Professor-Clinical in the Division of Hematology and
Associate Division Director for Ambulatory Operations
The Ohio State University Comprehensive Cancer Center, will provide insight into new directions in targeted therapeutic approaches for older adults with mantle cell lymphoma.
STATEMENT OF NEED
Mantle cell lymphoma (MCL) is a rare, aggressive B-cell non-Hodgkin lymphoma (NHL) accounting for 5% to 7% of all lymphomas. Its prognosis ranges from indolent disease that does not require treatment for years to very aggressive disease, which is associated with poor survival (Silkenstedt et al, 2021). Typically, MCL is diagnosed at advanced stage and in older patients who cannot tolerate intensive therapy (NCCN, 2022). Although recent advances have slightly increased remission rates, recurrence and relapse remain very common, leading to a median overall survival between 3 and 6 years (LLS, 2021). Though there are several effective options, progress is still needed towards establishing an accepted frontline approach for MCL (Castellino et al, 2022). Treatment selection and management of MCL are complicated by the heterogeneity of prognosis, advanced age and comorbidities of patients, and lack of an established standard approach for treatment, making it vital that clinicians be familiar with the latest research and advances in this area. In this activity chaired by Michael Wang, MD, Professor in the Department of Lymphoma & Myeloma at MD Anderson Cancer Center, expert faculty will discuss prognostic factors informing treatment, the promising results of recent trials in new therapeutic approaches, and the implications of treatment resistance in therapeutic selection for MCL.
Target Audience
Hematology/oncology fellows, attending faculty, and other health care professionals involved in the treatment of patients with mantle cell lymphoma (MCL).
Learning Objectives
1.) Identify clinical and biological prognostic factors that can guide treatment decision making for older adults with MCL
2.) Evaluate emerging data on targeted therapeutic approaches for treatment-naive and relapsed/refractory MCL and their applicability to older adults
3.) Assess mechanisms of resistance to targeted therapies for MCL and their implications for treatment selection
Title: Sense of Smell
Presenter: Dr. Faiza, Assistant Professor of Physiology
Qualifications:
MBBS (Best Graduate, AIMC Lahore)
FCPS Physiology
ICMT, CHPE, DHPE (STMU)
MPH (GC University, Faisalabad)
MBA (Virtual University of Pakistan)
Learning Objectives:
Describe the primary categories of smells and the concept of odor blindness.
Explain the structure and location of the olfactory membrane and mucosa, including the types and roles of cells involved in olfaction.
Describe the pathway and mechanisms of olfactory signal transmission from the olfactory receptors to the brain.
Illustrate the biochemical cascade triggered by odorant binding to olfactory receptors, including the role of G-proteins and second messengers in generating an action potential.
Identify different types of olfactory disorders such as anosmia, hyposmia, hyperosmia, and dysosmia, including their potential causes.
Key Topics:
Olfactory Genes:
3% of the human genome accounts for olfactory genes.
400 genes for odorant receptors.
Olfactory Membrane:
Located in the superior part of the nasal cavity.
Medially: Folds downward along the superior septum.
Laterally: Folds over the superior turbinate and upper surface of the middle turbinate.
Total surface area: 5-10 square centimeters.
Olfactory Mucosa:
Olfactory Cells: Bipolar nerve cells derived from the CNS (100 million), with 4-25 olfactory cilia per cell.
Sustentacular Cells: Produce mucus and maintain ionic and molecular environment.
Basal Cells: Replace worn-out olfactory cells with an average lifespan of 1-2 months.
Bowman’s Gland: Secretes mucus.
Stimulation of Olfactory Cells:
Odorant dissolves in mucus and attaches to receptors on olfactory cilia.
Involves a cascade effect through G-proteins and second messengers, leading to depolarization and action potential generation in the olfactory nerve.
Quality of a Good Odorant:
Small (3-20 Carbon atoms), volatile, water-soluble, and lipid-soluble.
Facilitated by odorant-binding proteins in mucus.
Membrane Potential and Action Potential:
Resting membrane potential: -55mV.
Action potential frequency in the olfactory nerve increases with odorant strength.
Adaptation Towards the Sense of Smell:
Rapid adaptation within the first second, with further slow adaptation.
Psychological adaptation greater than receptor adaptation, involving feedback inhibition from the central nervous system.
Primary Sensations of Smell:
Camphoraceous, Musky, Floral, Pepperminty, Ethereal, Pungent, Putrid.
Odor Detection Threshold:
Examples: Hydrogen sulfide (0.0005 ppm), Methyl-mercaptan (0.002 ppm).
Some toxic substances are odorless at lethal concentrations.
Characteristics of Smell:
Odor blindness for single substances due to lack of appropriate receptor protein.
Behavioral and emotional influences of smell.
Transmission of Olfactory Signals:
From olfactory cells to glomeruli in the olfactory bulb, involving lateral inhibition.
Primitive, less old, and new olfactory systems with different path
Custom Endoprotesi: Design e stampa 3D di protesi personalizzate per la caviglia
1. 19/07/2017
1
Design e stampa 3D di protesi
personalizzate per la cavigliapersonalizzate per la caviglia
Ing. Alberto LEARDINI e Ing. Paolo CARAVAGGI
Laboratorio Analisi del Movimento
Istituto Ortopedico Rizzoli
Total Ankle Replacement
Severe pain (*2M), end‐stage osteoarthritis with motion limitation (*50K)
Ankle Fusion Total Ankle Replacement (TAR)
CUSTOM IMPLANTS 2
Both ankle fusion and current day TARs are inadequate in addressing the problem
* Numbers refer to USA market only, not worldwide
2. 19/07/2017
2
Total Ankle ReplacementGeneration: Pioneers ‘70 Classics ‘80 Modern ‘90 Current 2000
Smith ICLH Newton TPR Mayo TNK Agility Bue‐Papp STAR ESKA AES Salto Alpha Hintegra Mobility Topez Eclipse SaltoTal Taric CCIevol
Cement fixation
Bone resection
Original CoR
changed
Osteolysis
Impingement
Loosening (90
Edge loading
Salvage/revision
Malleolar fracture
Polyethylene wear
and dislocation
Subsidence
Instability
Long pegs, cortical
window
Screw-based
fixation
Stress-shielding
Still Flat-Ti & Nat-
Ta?
Back to conforming
2-comp?!
Lateral access?!
Back to
constrained?!
Back to cement?!
Cumbersome
CUSTOM IMPLANTS 3
Loosening (90-
95%)
Subsidence
Infection
Instability
Instability
Impingement
Infection
Vascularity
Bone removal
Syndesmosis fusion
Non- delay-union
Groove at articulat
Earlier
complications
Sizing
operative
technique!
Leardini et al. GIOT 2007; Giannini et al. Foot Ankle Surg 2000
Disegno anatomo-funzionale
Post Ant
CUSTOM IMPLANTS 4
Plantarflexion DorsiflexionNeutral
Leardini Clin Biomech 2001; Med Bio Eng Comp 2001, 2002
3. 19/07/2017
3
Disegno anatomo-funzionale
CaFi
ICMax Pl
TiCa
CUSTOM IMPLANTS 5
Max Do
In 6 in‐vitro implantation (‘99–’02), and in about 1200 patients (Jul ‘03 – May ‘16)
Disegno funzionale
A1
A2
Tibia/Fibula Segment
A
B
F
CL CM
B1
B2
Lateral
Sphere
Medial
Sphere
Talus/Calcaneus Segment
Fixed
Sphere
CaFiL
TiCaL
C
CUSTOM IMPLANTS 6Parenti‐Castelli, Leardini et al., Med Bio Eng Comp 2007; J Biomech 2009
Two ligament fibres
Three rigid contacts:
A. 2 sph‐pla at Ti‐Ta, 1 sph‐pla at Ta‐Fi
B. 3 sph‐sph
3D mathematical description of passive kinematics
4. 19/07/2017
4
Disegno funzionale
CUSTOM IMPLANTS 7
Disegno anatomico
• A new TAR design with articulating surface geometry
representing a paradigm shift from the “Common knowledge”.
• Main features:
2. Lateral apex
1. Truncated non‐symmetric cone
Claims, close to normal:
• Joint Kinematics
• Load Transfer
CUSTOM IMPLANTS 8
3. Saddle shaped
• Loading of ligaments
• Behavior under functional
and extreme loads
Expected benefits:
• Reduced wear
• Reduced rates of failure
5. 19/07/2017
5
Disegno anatomico
Image‐ and experimental‐ based study of the morphology of the articular surfaces,
in natural and prosthetic ankle joint
CT Imaging
3D G t i l
CUSTOM IMPLANTS 9
Segmentation &
3D Renderings
3D Geometrical
Analysis Design & Manufacturing
of Artificial Surfaces
Testing: 3D Kinematics and Kinetics Analyses
CAOS & EFAS Best Paper Awards!, June 2016ankles (vitro/vivo)
Progettazione personalizzata
Imaging
Biomech. MODELS:
anatomical
Bones
Li t D
D
E
S
I
D
E
S…modelling
Motion analysis
funct/anat
functional
Ligaments
Kinematics
D
E
S
I
G
N
G
N
d
i
m
e
s
n
Surgical/clinical
options:
• position
• shoulder/gutter
• fixation elements
• material
I
G
N
f
i
n
a
l
both ankles?!
CUSTOM IMPLANTS 10
e
d
• cement / coating
• transverse plane
• chamfers
• insert
• cutting blocks?
both ankles?!
Liverani et al. Materials and Design 2016
6. 19/07/2017
6
Scansioni ed immagini
Best selection, including possible combinations, among imaging devices at IOR:
CT based tech:
‐ Standard CT (no soft tissue)‐ Standard CT (no soft tissue)
‐ Dual‐Energy CT (enhancement of soft tissues)
‐ ConeBeam CT (new technology, 3D and soft tissue, … loading!)
CUSTOM IMPLANTS 11
MRI based tech:
‐ 1.5 T MRI
‐ 3.0 T MRI
Scansioni ed immagini
to create reference markers well detectable in CT & MRI via material combination
rigidly fixed on relevant anatomical structures via plaster
HARD MARKER
with centered cavity…. ….Filled with a
CRYSTAL JELLY BALL…. ….and hermetically closed
CUSTOM IMPLANTS 12
to avoid possible drying.
16. 19/07/2017
16
Sviluppi futuri …
Specialised Research /
Design Centre #iSpecialised Research /
Design Centre #1
Trad. Fabrication #N
Cloud
Services
Specialised Research /
Design Centre #N
Trad. Fabrication #1
Trad. Fabrication #j
CUSTOM IMPLANTS 31
3DP Fabrication!
g
Grazie per l’attenzione
Ing. Alberto Leardini [leardini@ior.it]
Ing. Claudio Belvedere [claudio.belvedere@ior.it]
CUSTOM IMPLANTS 32
Ing. Paolo Caravaggi [paolo.caravaggi@ior.it]
Laboratorio Analisi del Movimento, Istituto Ortopedico Rizzoli