Carmen Alicia Alcalá Blandín has over 20 years of experience in design engineering for process plants and refineries. She has worked as a project manager and coordinator for projects in Venezuela, overseeing the design, construction, and installation of static and rotating equipment. Her areas of expertise include pressure vessels, piping, tanks, pumps, and compliance with international codes like ASME and API. She is proficient in technical software like Primavera, EISIS Calculation, and hydraulic programs.

1. PERSONAL DATA
Name: Carmen Alicia Alcalá Blandín I.D. or Passport N°: 5524863 Citizenship (Country): Venezuela Marital Status: Single with children Phone Numbers: 58-212-4318457 / 58-414-8211164 / 58-416-3966794 Address: Av. Principal Ruiz Pineda Edif. 4 piso 6 apart- e/65 Caricuao Caracas Venezuela E-mail: blandin@hotmail.com EDUCATIONAL BACKGROUND
Engineering specialist in mechanical design - Universidad Central de Venezuela - Venezuela – 1990/ BSc heavy oil 2006/2008, Technical evaluation of static and rotary equipment UCV 1996/1998.
SUMMARY EXPERIENCE
Years of Experience: 20 Design engineer in process plant, and refinery plant. Pressure vessels inspection, maintenance and design, layout piping, isometric piping, inspection tanks, pumps and accessory in field and constructions. Project leader in construction and quality assurance. Specification develops for equipment static, piping class and rotary acquisition in accordance with international code: ASME section VIII / V/ II/ I / and ANSI, B31.3/ 31.4/31.8/. API 650 / 620/ 610/ API 1104, AWWA. Storage tanks calculation, inspection in accordance whit API 650/620. Project Coordination for design optimization, operations and installation of static equipment and rotary equipment, (API, 650, 610, 653) focused in maximizing asset production capacity and productivity. I have experience with preparations detailed design drawings for layout and packaging of equipment skids. Mechanical Project coordinator and project manager (August. 2000 –at present). Monitoring the execution of all mechanical activities including pipe, fitting, welding, and isolations, turning, milling, and assembling. Check the completion and commissioning activities relevant to functional parts of mechanical equipment such as vessels, piping, exchangers, boilers, etc. according to the relevant procedures and recommendations, in respect of time scheduling. Supervisor the activities during their execution, accepting the works, if in accordance with the requirements. Maintenance appropriate documentation concerning interventions, inspections and controls on relevant equipment and system. Compiling complete and submitting of reports and documentation regarding mechanical activities. Contribution with the review the performance of Contractor personnel, as well as the consideration for safety aspects, To ensure and monitoring the execution of all mechanical/piping activities to be carried out during the construction, including testing and commissioning in accordance with specification and statutory requirements at assigned location. TECHNICAL SOTFWARE DRIVE: PRIMAVERA PROJECT, EISIS CALCULATION, CAMERUN HIDRAULIC, PV ELITE, HISIM, tanks, distank and OTHERS software. Languages: Primary Language: Spanish. English: Reading: Advanced Level, Writing: Advanced Level, Speaking: Medium Level. Computers Applications:
COMPETENCIES: I have the following skill: Contractor’s coordination and supervisory ability. Good Communications skills, both oral and written, including the ability to write effective reports Ability to work in team environments, communication, understanding and work within the dynamics of a multi functional and multi location environmental. Capacity to integrate himself in a foreign International and national staff. Analytical skills Strong commitment to safety.

2. WORK EXPERIENCE
Project and Design Mechanical: Vepica and Pdvsa C.A May 2009 at Present: Project Manager: Engineer and designer of pipeline, storage and processing facilities include Process equipment design and selection, calculation, inspection and maintenance. (Tanks, pumps staticts equipments and piping, Pump/Compressor size and design), Valve sizing (relief valve, control valve, etc.) Liquid measurement systems. Products treating methods and equipment gas measuring. Experience managing contract engineering firms. Economic evaluation skills. Support commercial activities for the development, analysis and execution of organic growth and acquisition opportunities. Provide PSM support to facility operations – hazard analysis, change management, safety information. Coordination, review ion and approving engineering studies. Coordination and approbation Design Basis Memorandum documents. Coordination all discipline engineering and design (Process, Mechanical, Structural, Civil, Electrical, Instrumentation and controls) groups to develop an efficient, consistent, cohesive overall design. Writing weekly reports for clients. Approbation all material requisitions. Approbation all engineering drawings. Development, approbation and stamped plot plans. Helpmeet development the Work Breakdown Structure, WBS Key Plan, Model Key Plan. Coordination engineering work package development. Writing construction work packages scopes of work for contract requisitions. Management field Request. Experience in design, detail engineering and drafting Piping system for oil Plants. Experience in preparation Technical specifications for Pipes, Piping components, Valves & Special Items. Preparations initial & final Material take off for piping components from P&ID's, Equipment layout, Piping Layout & Isometrics. Lay-out planning, stress analysis and support design. Proyecta Corp /Ab Projects and Pdvsa - Country: Venezuela April/2000 - February/20009 Project Coordination and Project Manager JOB Description: Supervisions the execution of works within the assigned discipline and/or category in compliance with the requirements of technical documents, established time and cost limits, security and quality procedures and regulations. Basic and detail Engineering for enacted oil recovery project for Pdvsa-Petrocedeño company with piping leader supervisor in the project, revision and design layout plant and piping drawings, materials list, metric computer Detail and basic engineering for installations of system injection CL in tanks of storage in main station for SINCOR Dimension equipment and piping design ands layout plant, Isometric and pipe rack. Design united package on injection chemical and bactericide for SINCOR in petrololific Orinoco face in cluster IA, IC, JA Y LB. elaborations material requisitions, metric computer. Design, Specifications pumps, specifications piping materials, piping route, plot plant and piping layout, Construction package. Handling Ethanol Gasoline in PTO la Cruz refinery: Design vessel and tanks, selection mixer static equipment, filters, design compressor plant Amana carito and Tejero, Amine Plant in Muscar complex, display Barquisimeto poliduct: Detail engineering for Gas duct Barbacoa Margarita and Guiria El Pilar Caripito- Muscar. Treatments water injection for facilities productions of petroleum and gas in Cardón refinery Venezuelan, design and installation multiphase measures for gas compressor plant. Execution project of engineering in face detail, basic, conceptual and display in plant of process crude and gas in petroleum company and project engineer in piping and layout process plant in accordance whit international code design, calculation of pressures vessels, tank piping and accessory of static and pumps equipment, selections of Design code with ASME API ASTM NACE ANSI B31.3, 31.4 31.8, API 5L API 1104 PDVSA, AWWA And others internationals code. Inspector engineer and QA/QC coordination in construction of Bare Plant: development of List equipments and list line, Tie INS, man Hours estimations, project control and planner, bid preparations and developments, definition of project and activities of constructions and inspections. Assigned Projects: Expertise in inspection equipment process and operations refinery and installation of process plant Pumps, boiler, and pressures vessels design, Experience included performing inspections and support planning for qualification, design, fabrication, examination, and repair of welds. Pre commissioning, Familiarization with ASME Boiler & Pressure Code, Section IX and other codes as required. I have general knowledge of manual and automatic welding processed and qualification procedures to ASME Boiler & Pressure Vessel Codes and AWS Codes. NDE and metallurgical examination techniques. ASME, pressure vessel, API 620, API 650, API 653, ASME B 31.3, 31.4 and 31.8 ASME section VIII, ASME sect. IX, ASME section I and V, boiler pressure, liquid penetrates, magnetic particle, NDT, pressure vessel, radiography, ultrasonic testing, welding codes, NDT. Preparations cost estimates, timelines, and

3. schedules for mechanical projects. Use experience and expertise in the selection of vendors for design and production of process equipment considering operation and maintenance cost and complexity. Develop specifications for equipment and implement purchasing and delivery plans, complete installations, validations, and commissioning. Redesign, modify, and manage modifications of design and packaging equipment. handle multiple projects simultaneously, previous project engineering/management experience in similar work areas (typical projects would include water and waste water treatment plants, dams, sewers, piping systems, pump stations, water distribution, water supply, water treatment, waster water treatment, and waste water disposition. I have general knowledge of manual and automatic welding processed and qualification procedures to ASME Boiler & Pressure Vessel Codes and AWS Codes, pressure vessel, API 620, API 650, ASME B 31.3, 31.4 and 31.8 ASME section VII, ASME sect. IX, ASME section I and V, Experience included performing inspections and support planning for qualification, design, fabrication, examination, and repair of welds. Pre commissioning, Familiarization with ASME Boiler & Pressure Code, Section IX and other codes as required. Experience included performing inspections and support planning for qualification, design, fabrication, examination, and repair of welds. Flow station design and optimization, Gas and Oil equipment design (compressors, boilers, turbines, distillation towers, .Interpret specifications; cost effective designs; ensure that designs are correctly transformed into engineering drawings; prepare calculations; test procedures and, when applicable, supervise field installation. Plan, schedule, and / or coordinate a portion of a major engineering effort or an entire small engineering effort. Work independently on projects in support of engineering and research and development efforts as appropriate. Participation in industry organizations and professional societies. Evaluate and promote the use of new engineering practices and processes to enhance the company’s competitive position. Provide technical guidance to junior personnel assisting on assignments. Comply with all applicable quality, health, safety and environmental regulations.
Jantesa engineering and construction /Bu engineer and Pdvsa - Country: Venezuela July 1990 December 1999. •Project leader in construction and quality assurance. •Specification develops for equipment static, piping class and rotary acquisition in accordance with international code: ASME section VIII / V/ II/ I / and ANSI, B31.3/ 31.4/31.8/. Code API 650/620/610/ AWWA. Complete knowledge on Pressure Vessel ASME section II & VIII, API, ANSI and ASTM codes. •Storage tanks calculation, inspection in accordance whit API 650/620. •Project Coordination for design optimization, operations and installation of static equipment (ASME) and rotary equipment, (API 610) focused in maximizing asset production capacity and productivity. • I have experience with preparations detailed design drawings for layout and packaging of equipment skids. Prepare or reviews design work, related to Static equipment and piping installations, for new projects, modifications and alterations to existing systems. Studies and analyzes of problems relating to mechanical static equipment or piping systems and recommendations appropriate solutions. Include conducting conceptual and feasibility studies, developing cost estimates provides technical advice to management and other departments/divisions as required, particularly on the subjects of piping, Static equipment including pressure vessels, and storage tanks. Preparations or reviews design work, related to Static equipment and piping installations, for projects, modifications and alterations to existing systems. Studies and analyzes complex problems relating to mechanical static equipment or piping systems and recommends appropriate solutions. Working with other specialist discipline engineers and updating engineering drawings, standards and specifications.

4. COURSES AND CERTIFICATES (Agregar y/o Modificar)
Course Title Institution Hours Country Beginning End Technical de inspection in pressures vessels Solditeca 130 Venezuela 7/1998 7/1998 Project manager Inger Bank 60 Venezuela 1/2001 1/2001 Centrifugal pumps selections Ingersoll Rand 40 Venezuela 5/2000 5/2000 Radiographic Inspection. UCV 160 Venezuela 4/1997 4/1997 QA/QC course. Solution’s Technological 120 Venezuela 8/2000 8/2000 Iso 9000 course Solution’s Technological 60 Venezuela 2/1996 2/1996 Pumps course Mm Pumps 40 Venezuela 10/2003 10/2003
ADDITIONAL INFORMATION (Modificar)
- Salary Expectation: 10000$ free taxes - Requested Job 1: Manager Engineer and Construction - Requested Job 2: Senior engineer in Piping and equipment - Preferred Working Location: Ditto. Capital, Spain, Mexico, and Qatar - Published Articles: Ethanol implants pto la Cruz refinery plant. -