Ct1 assignment bqs
•
0 likes•290 views
This document outlines a group assignment for a construction technology course. It asks student groups to analyze the building they live in by (1) illustrating the building type with plans/sketches/photos, (2) identifying and explaining the roof, windows/doors, and stairs with supporting materials, and (3) comparing these elements to one alternative and recommending a replacement for the roof, windows/doors, or stairs. The assignment is 25% of the course grade and is due on June 8, 2015.
Report
Share
Report
Share
Download to read offline
Recommended
Assignment brief-for-site-report
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total of
Measurement 1-site-visit
1) The document summarizes a site visit by students to an active construction project located in Puchong, Malaysia.
2) Upon arrival, students received a briefing about the project which included details about its large size and budget. Safety precautions for the site were also explained.
3) Students then toured the site in small groups, observing construction equipment, materials, and techniques used by workers. This helped students understand practical applications compared to theoretical knowledge.
4) Key aspects of the site included its use of pile foundations due to soil conditions, as well as reinforced concrete construction using grades 30-40 concrete.
Construction technology-report
The document summarizes the construction features of The Gardens Mall in Kuala Lumpur, Malaysia. It describes the different types of doors used, including fire doors made of timber and metal sliding doors. It recommends metal sliding fire doors due to their higher fire resistance and lifespan compared to wooden doors. Toilet doors made of timber or plastic are also compared, with plastic sliding doors found to have lower overall cost and maintenance than wooden doors. In conclusion, the document analyzes and compares various door types used in the mall's construction.
Construction technology
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
CT 2
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Building services-i
The document summarizes the ventilation issues in a heritage building in Penang, Malaysia called City Hall. It discusses the types of natural ventilation used historically including single-sided, cross, and stack ventilation. Issues like moisture, salt crystallization, and dust have caused problems for the building over time due to its location by the sea. Recommendations are made to clean mechanical ventilators, construct a wind wall, install exhaust ventilators, and add solar chimneys to improve airflow and address ventilation problems in the heritage structure.
Royal properties sdn bhd MS
Royal Properties Sdn. Bhd. is a property development company located in Petaling Jaya, Malaysia with a capital of RM 10 million. The document outlines the company's organizational structure, which includes a board of directors and departments for project management, sales and marketing, human resources, and finance. It also discusses the company's vision, mission, and short-term and long-term goals. Additionally, it provides information on recruiting strategies for young talents and developing a positive company culture.
Individual assignment brief ct3-2015
This document provides information about an individual assignment for a Construction Technology course. It constitutes 10% of the total assessment. The objectives of the assignment are to develop the ability to apply complete construction procedures and illustrate each stage of the building process with labeled technical drawings. Upon completion, students will be able to interpret construction sequences, demonstrate material applications, explain building design principles, and sketch and label building elements. Students are required to prepare a booklet with 20 sketches/drawings based on course topics and submit it in Week 12.
Recommended
Assignment brief-for-site-report
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total of
Measurement 1-site-visit
1) The document summarizes a site visit by students to an active construction project located in Puchong, Malaysia.
2) Upon arrival, students received a briefing about the project which included details about its large size and budget. Safety precautions for the site were also explained.
3) Students then toured the site in small groups, observing construction equipment, materials, and techniques used by workers. This helped students understand practical applications compared to theoretical knowledge.
4) Key aspects of the site included its use of pile foundations due to soil conditions, as well as reinforced concrete construction using grades 30-40 concrete.
Construction technology-report
The document summarizes the construction features of The Gardens Mall in Kuala Lumpur, Malaysia. It describes the different types of doors used, including fire doors made of timber and metal sliding doors. It recommends metal sliding fire doors due to their higher fire resistance and lifespan compared to wooden doors. Toilet doors made of timber or plastic are also compared, with plastic sliding doors found to have lower overall cost and maintenance than wooden doors. In conclusion, the document analyzes and compares various door types used in the mall's construction.
Construction technology
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
CT 2
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Building services-i
The document summarizes the ventilation issues in a heritage building in Penang, Malaysia called City Hall. It discusses the types of natural ventilation used historically including single-sided, cross, and stack ventilation. Issues like moisture, salt crystallization, and dust have caused problems for the building over time due to its location by the sea. Recommendations are made to clean mechanical ventilators, construct a wind wall, install exhaust ventilators, and add solar chimneys to improve airflow and address ventilation problems in the heritage structure.
Royal properties sdn bhd MS
Royal Properties Sdn. Bhd. is a property development company located in Petaling Jaya, Malaysia with a capital of RM 10 million. The document outlines the company's organizational structure, which includes a board of directors and departments for project management, sales and marketing, human resources, and finance. It also discusses the company's vision, mission, and short-term and long-term goals. Additionally, it provides information on recruiting strategies for young talents and developing a positive company culture.
Individual assignment brief ct3-2015
This document provides information about an individual assignment for a Construction Technology course. It constitutes 10% of the total assessment. The objectives of the assignment are to develop the ability to apply complete construction procedures and illustrate each stage of the building process with labeled technical drawings. Upon completion, students will be able to interpret construction sequences, demonstrate material applications, explain building design principles, and sketch and label building elements. Students are required to prepare a booklet with 20 sketches/drawings based on course topics and submit it in Week 12.
Traversing final-report
This document is a report on a fieldwork traversing exercise conducted by students. It includes an introduction to open and closed traverses, as well as northings, azimuths, and bearings. The objectives of the exercise were to learn traversing procedures, establish ground control, and gain hands-on experience using surveying equipment like theodolites, rods, and bubbles. The document outlines the equipment used and provides field data collected. It discusses computing angular errors, bearings, coordinates, and error of closure to evaluate the accuracy of the work.
Leveling final-report
This report summarizes a leveling fieldwork exercise conducted at Taylor's University Lakeside Campus carpark. The objective was to determine the reduced level of 11 checkpoints using an automatic level, tripod, leveling rod and other surveying equipment. Field measurements were recorded using the rise and fall method and height of collimation method. The data showed a small misclosure error of 0.018m, which was within the acceptable limit. The reduced levels were then adjusted using the loop misclosure correction method.
CT2 group-assignment-brief (video)+2015
This document provides instructions for a group assignment to produce a 20-minute educational video on a construction process for a Construction Technology course. It outlines criteria for an engaging introduction, proper credits and location text, various camera techniques, smooth editing between shots, clear and correct information, and error-free text and audio. Students will work in groups of 5 and ensure all members contribute to all aspects of the video's production. The finished video project is due on November 26th before 2:30 pm on a CD.
Individual assignment brief ct2-2014
This document provides information about an individual assignment for a Construction Technology 2 course. It outlines the objectives, learning outcomes, task, and submission requirements. Students are required to prepare a booklet with 20 labeled sketches/drawings illustrating different stages of the building process and applying construction procedures and materials. The sketches must demonstrate an understanding of building design concepts and construction practices. The booklet is due in Week 12 and will constitute 10% of the student's total course assessment.
Presentation
The document discusses water treatment processes for domestic water supplies. It describes 5 steps for household water supply installation: coagulation, sedimentation, filtration, disinfection, and storage. Coagulation uses chemicals to remove dirt and particles. Sedimentation uses gravity to separate solids. Filtration removes smaller particles through layers of sand and charcoal. Chlorine is added to disinfect water and kill bacteria. Treated water is stored before distribution. The document also discusses water quality problems like turbidity, pathogens, hardness, iron, manganese, and chemicals; and recommends future improvements like nanotechnology and using cow manure in nutrient separation and ultrafiltration systems to produce clean water.
Ct project 1 bqs
This document provides information about the construction of Starhill Gallery in Kuala Lumpur, Malaysia. It discusses the pitched roof, U-shaped staircases, and concrete materials used in the building. For the roof, it describes the advantages of the pitched metal roof but also proposes a flat asphalt roof as an alternative. For the staircases, it analyzes the U-shaped design and concrete construction, but suggests L-shaped stairs could also work well. The document compares various options and provides details to summarize key elements of the iconic shopping mall's architectural design.
Assignment brief for site report bqs
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the type of foundation and reinforced concrete grades used, explaining their advantages and disadvantages for each building element. The assignment will be assessed out of 10 marks for each module based on the objective, content, photos, and conclusion.
bqs Building materials presentation 2
The document describes various materials used in the construction and finishing of room LT21 on campus. It discusses timber used on the walls, concrete used for the floor and staircase, carpet finishing on the floor and staircase, glass used for windows, a hole acoustic diffuser panel in the ceiling, cushion wall, aluminium used for the staircase and window frames, and white paint used on the ceiling. Each material includes descriptions of its features and advantages and disadvantages of its use.
BQS bq assignment
This document provides an assignment brief for a group project to take off quantities from drawings for the construction of 5 blocks of 5-story student dormitories. Students are required to prepare a complete bill of quantities for specific structural elements, including pilecaps and excavation, work below ground level, slabs and beams from the first to fourth floors, and roof slabs and beams. The goals are to develop understanding of measurement principles and techniques for preparing bills of quantities, tender documentation, and the standard method of measurement for taking off quantities from drawings. Upon successful completion, students will be able to interpret measurement clauses, distinguish design changes in descriptions, and competently prepare bills of quantities for substructure and reinforced concrete frameworks.
bqs Site report
1) The document summarizes a site visit report to The Andes construction site in Kuala Lumpur, Malaysia.
2) The site visit provided observations of the construction processes, materials, and equipment being used at different phases of the project. This included observations of piled foundations, reinforced concrete works, and dewatering activities.
3) The report reflects that the site visit helped the student better understand construction topics and principles discussed in class and will help prepare them for future careers in the construction industry.
bqs Assignment no.2
This document provides an assignment brief for a group project to take off quantities from drawings for the construction of 5 blocks of 5-story student dormitories. Students are required to prepare a complete taking-off and billing for various structural elements including pilecaps, work below ground level, floor slabs and beams from the first to fourth floors, and roof slabs and beams. The goals are to develop understanding of measurement principles and techniques for preparing bills of quantities, tender documentation, and the standard method of measurement for taking off quantities from drawings. Upon successful completion, students will be able to interpret measurement clauses, distinguish design changes in descriptions, and competently prepare bills of quantities for substructure and reinforced concrete frameworks.
Epc presentation 1.1 Taman Ayun Temple
- The temple was built in 1634 in the village of Mengwi on the Indonesian island of Bali by the Mengwi kingdom and King I Gusti Agung Anom.
- It has a multi-layered roof in the Balinese architectural style and is surrounded by a beautiful landscaped garden and fish pond.
- The temple layout follows the Balinese mandala system with three zones - the outermost zone for dance performances, the middle zone for gatherings, and the innermost and most sacred zone resembling pagodas.
Epc 2.1 Lembah Kiara Park
Felix analyzed a recreational park located in Petaling Jaya, Malaysia that covers an area of 300 football fields and was completed in 2007. The park features a natural design with greenery and a lake, and includes an uncommon 20-meter long hanging bridge made of rope and wood that connects to nearby Mount Kiara. The bridge underwent transformations in 2010 and 2014. References from online articles about the park's history and makeovers are provided.
School of-architecture-group 1.1
This document summarizes a student group project for a social psychology class to design an interpersonal relationship space called GEN-Y. It is a beach cafe and lounge located in Malacca, Malaysia meant for the new generation to socialize without social media. The 1000 square meter space includes an indoor balcony, side lounge, and music stage designed to encourage interaction based on attractiveness, beliefs, interests, and attitudes. The goal of the project is to help people develop closer interpersonal relationships and improve attitudes without prejudice through socializing.
Psychology final journal 2.1
This document contains a student's assignment submission for a social psychology course. It includes the student's name, ID number, course details, and contact information. The main body summarizes and analyzes a magazine advertisement for a muscle-building supplement brand endorsed by bodybuilder Jay Cutler. The summary identifies that the ad uses four persuasion techniques: featuring a credible communicator in Jay Cutler, displaying an attractive muscular model, promoting effective results without attitude change, and including emotionally appealing messages about nutrients and taste.
Psy journal 2 1.2
This advertisement for Jay Cutler Elite Series protein powder features bodybuilder Jay Cutler to leverage his credibility as a Mr. Olympia champion. The ad depicts Cutler's muscular arm and claims the product delivers "more muscle building results in every scoop." The analysis finds the ad employs four persuasion techniques - using a credible communicator in Cutler, featuring his attractive muscular physique, making a factual claim about muscle building without changing attitudes, and including an emotional message about taste and muscle nutrients.
Psy 2 essay
This document contains a student's assignment submission for a social psychology course. It discusses an image showing a beggar and a mocking high school student. The student analyzes how various social cognition concepts are demonstrated in the image. Specifically, the student discusses how perseverance effect is shown through the boy's biased interpretation. Representative heuristic is seen as other citizens take shortcuts by neglecting the beggar. Self-fulfilling prophecy also influences people's behavior, as their expectations of beggars as dirty causes them to walk away rather than help. In conclusion, the student argues we should not judge people by appearances and should address life situations fairly without expressing personal opinions.
Power bank presentation
This document summarizes a business plan for a power bank company. The company was started in Malaysia in 2014 and produces power banks with capacities of 5000 and 10000 mAh. It aims to bring convenience to customers by allowing them to charge devices anywhere, anytime. The document outlines the company's products, target market, competitors, and marketing strategies such as promotional activities, psychological pricing, and advertising. It also discusses plans for operations management, sales, human resources, and financial management. Financial projections show expected sales and profits over three years.
Foundation in natural built and environment Accounting FINAL
The document analyzes the financial ratios of Cheetah, a sports apparel company, for 2012-2013. It finds that Cheetah's profitability ratios like return on equity and net profit margin decreased, indicating worsening profitability. Its liquidity ratios like working capital ratio also decreased, suggesting a weaker ability to pay debts. While inventory turnover improved slightly, debt collection slowed. Based on the weakening ratios, the document recommends against investing in Cheetah due to its unprofitable operations and financial instability.
Optometry Presentation
This document compares two optical businesses, Mi-Wah Superior Optical Centre and Teo Optometry Sdn. Bhd., located in different areas. Mi-Wah is a sole proprietorship located in Kuala Lumpur serving around 1,000 customers annually with revenue of RM300,000. Teo Optometry is located in Johor serving around 4,000 customers annually with RM720,000 revenue and employs 3 staff. Both businesses face 3 local competitors and operate in a monopolistically competitive market. The document provides recommendations for each business to expand operations and customer base.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
More Related Content
More from Felix Vong
Traversing final-report
This document is a report on a fieldwork traversing exercise conducted by students. It includes an introduction to open and closed traverses, as well as northings, azimuths, and bearings. The objectives of the exercise were to learn traversing procedures, establish ground control, and gain hands-on experience using surveying equipment like theodolites, rods, and bubbles. The document outlines the equipment used and provides field data collected. It discusses computing angular errors, bearings, coordinates, and error of closure to evaluate the accuracy of the work.
Leveling final-report
This report summarizes a leveling fieldwork exercise conducted at Taylor's University Lakeside Campus carpark. The objective was to determine the reduced level of 11 checkpoints using an automatic level, tripod, leveling rod and other surveying equipment. Field measurements were recorded using the rise and fall method and height of collimation method. The data showed a small misclosure error of 0.018m, which was within the acceptable limit. The reduced levels were then adjusted using the loop misclosure correction method.
CT2 group-assignment-brief (video)+2015
This document provides instructions for a group assignment to produce a 20-minute educational video on a construction process for a Construction Technology course. It outlines criteria for an engaging introduction, proper credits and location text, various camera techniques, smooth editing between shots, clear and correct information, and error-free text and audio. Students will work in groups of 5 and ensure all members contribute to all aspects of the video's production. The finished video project is due on November 26th before 2:30 pm on a CD.
Individual assignment brief ct2-2014
This document provides information about an individual assignment for a Construction Technology 2 course. It outlines the objectives, learning outcomes, task, and submission requirements. Students are required to prepare a booklet with 20 labeled sketches/drawings illustrating different stages of the building process and applying construction procedures and materials. The sketches must demonstrate an understanding of building design concepts and construction practices. The booklet is due in Week 12 and will constitute 10% of the student's total course assessment.
Presentation
The document discusses water treatment processes for domestic water supplies. It describes 5 steps for household water supply installation: coagulation, sedimentation, filtration, disinfection, and storage. Coagulation uses chemicals to remove dirt and particles. Sedimentation uses gravity to separate solids. Filtration removes smaller particles through layers of sand and charcoal. Chlorine is added to disinfect water and kill bacteria. Treated water is stored before distribution. The document also discusses water quality problems like turbidity, pathogens, hardness, iron, manganese, and chemicals; and recommends future improvements like nanotechnology and using cow manure in nutrient separation and ultrafiltration systems to produce clean water.
Ct project 1 bqs
This document provides information about the construction of Starhill Gallery in Kuala Lumpur, Malaysia. It discusses the pitched roof, U-shaped staircases, and concrete materials used in the building. For the roof, it describes the advantages of the pitched metal roof but also proposes a flat asphalt roof as an alternative. For the staircases, it analyzes the U-shaped design and concrete construction, but suggests L-shaped stairs could also work well. The document compares various options and provides details to summarize key elements of the iconic shopping mall's architectural design.
Assignment brief for site report bqs
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the type of foundation and reinforced concrete grades used, explaining their advantages and disadvantages for each building element. The assignment will be assessed out of 10 marks for each module based on the objective, content, photos, and conclusion.
bqs Building materials presentation 2
The document describes various materials used in the construction and finishing of room LT21 on campus. It discusses timber used on the walls, concrete used for the floor and staircase, carpet finishing on the floor and staircase, glass used for windows, a hole acoustic diffuser panel in the ceiling, cushion wall, aluminium used for the staircase and window frames, and white paint used on the ceiling. Each material includes descriptions of its features and advantages and disadvantages of its use.
BQS bq assignment
This document provides an assignment brief for a group project to take off quantities from drawings for the construction of 5 blocks of 5-story student dormitories. Students are required to prepare a complete bill of quantities for specific structural elements, including pilecaps and excavation, work below ground level, slabs and beams from the first to fourth floors, and roof slabs and beams. The goals are to develop understanding of measurement principles and techniques for preparing bills of quantities, tender documentation, and the standard method of measurement for taking off quantities from drawings. Upon successful completion, students will be able to interpret measurement clauses, distinguish design changes in descriptions, and competently prepare bills of quantities for substructure and reinforced concrete frameworks.
bqs Site report
1) The document summarizes a site visit report to The Andes construction site in Kuala Lumpur, Malaysia.
2) The site visit provided observations of the construction processes, materials, and equipment being used at different phases of the project. This included observations of piled foundations, reinforced concrete works, and dewatering activities.
3) The report reflects that the site visit helped the student better understand construction topics and principles discussed in class and will help prepare them for future careers in the construction industry.
bqs Assignment no.2
This document provides an assignment brief for a group project to take off quantities from drawings for the construction of 5 blocks of 5-story student dormitories. Students are required to prepare a complete taking-off and billing for various structural elements including pilecaps, work below ground level, floor slabs and beams from the first to fourth floors, and roof slabs and beams. The goals are to develop understanding of measurement principles and techniques for preparing bills of quantities, tender documentation, and the standard method of measurement for taking off quantities from drawings. Upon successful completion, students will be able to interpret measurement clauses, distinguish design changes in descriptions, and competently prepare bills of quantities for substructure and reinforced concrete frameworks.
Epc presentation 1.1 Taman Ayun Temple
- The temple was built in 1634 in the village of Mengwi on the Indonesian island of Bali by the Mengwi kingdom and King I Gusti Agung Anom.
- It has a multi-layered roof in the Balinese architectural style and is surrounded by a beautiful landscaped garden and fish pond.
- The temple layout follows the Balinese mandala system with three zones - the outermost zone for dance performances, the middle zone for gatherings, and the innermost and most sacred zone resembling pagodas.
Epc 2.1 Lembah Kiara Park
Felix analyzed a recreational park located in Petaling Jaya, Malaysia that covers an area of 300 football fields and was completed in 2007. The park features a natural design with greenery and a lake, and includes an uncommon 20-meter long hanging bridge made of rope and wood that connects to nearby Mount Kiara. The bridge underwent transformations in 2010 and 2014. References from online articles about the park's history and makeovers are provided.
School of-architecture-group 1.1
This document summarizes a student group project for a social psychology class to design an interpersonal relationship space called GEN-Y. It is a beach cafe and lounge located in Malacca, Malaysia meant for the new generation to socialize without social media. The 1000 square meter space includes an indoor balcony, side lounge, and music stage designed to encourage interaction based on attractiveness, beliefs, interests, and attitudes. The goal of the project is to help people develop closer interpersonal relationships and improve attitudes without prejudice through socializing.
Psychology final journal 2.1
This document contains a student's assignment submission for a social psychology course. It includes the student's name, ID number, course details, and contact information. The main body summarizes and analyzes a magazine advertisement for a muscle-building supplement brand endorsed by bodybuilder Jay Cutler. The summary identifies that the ad uses four persuasion techniques: featuring a credible communicator in Jay Cutler, displaying an attractive muscular model, promoting effective results without attitude change, and including emotionally appealing messages about nutrients and taste.
Psy journal 2 1.2
This advertisement for Jay Cutler Elite Series protein powder features bodybuilder Jay Cutler to leverage his credibility as a Mr. Olympia champion. The ad depicts Cutler's muscular arm and claims the product delivers "more muscle building results in every scoop." The analysis finds the ad employs four persuasion techniques - using a credible communicator in Cutler, featuring his attractive muscular physique, making a factual claim about muscle building without changing attitudes, and including an emotional message about taste and muscle nutrients.
Psy 2 essay
This document contains a student's assignment submission for a social psychology course. It discusses an image showing a beggar and a mocking high school student. The student analyzes how various social cognition concepts are demonstrated in the image. Specifically, the student discusses how perseverance effect is shown through the boy's biased interpretation. Representative heuristic is seen as other citizens take shortcuts by neglecting the beggar. Self-fulfilling prophecy also influences people's behavior, as their expectations of beggars as dirty causes them to walk away rather than help. In conclusion, the student argues we should not judge people by appearances and should address life situations fairly without expressing personal opinions.
Power bank presentation
This document summarizes a business plan for a power bank company. The company was started in Malaysia in 2014 and produces power banks with capacities of 5000 and 10000 mAh. It aims to bring convenience to customers by allowing them to charge devices anywhere, anytime. The document outlines the company's products, target market, competitors, and marketing strategies such as promotional activities, psychological pricing, and advertising. It also discusses plans for operations management, sales, human resources, and financial management. Financial projections show expected sales and profits over three years.
Foundation in natural built and environment Accounting FINAL
The document analyzes the financial ratios of Cheetah, a sports apparel company, for 2012-2013. It finds that Cheetah's profitability ratios like return on equity and net profit margin decreased, indicating worsening profitability. Its liquidity ratios like working capital ratio also decreased, suggesting a weaker ability to pay debts. While inventory turnover improved slightly, debt collection slowed. Based on the weakening ratios, the document recommends against investing in Cheetah due to its unprofitable operations and financial instability.
Optometry Presentation
This document compares two optical businesses, Mi-Wah Superior Optical Centre and Teo Optometry Sdn. Bhd., located in different areas. Mi-Wah is a sole proprietorship located in Kuala Lumpur serving around 1,000 customers annually with revenue of RM300,000. Teo Optometry is located in Johor serving around 4,000 customers annually with RM720,000 revenue and employs 3 staff. Both businesses face 3 local competitors and operate in a monopolistically competitive market. The document provides recommendations for each business to expand operations and customer base.
More from Felix Vong (20)
Foundation in natural built and environment Accounting FINAL
Foundation in natural built and environment Accounting FINAL
Recently uploaded
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcDRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Recently uploaded (20)
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Ct1 assignment bqs
- 1. SCHOOL OF ARCHITECTURE, BUILDING AND DESIGN BACHELOR OF QUANTITY SURVEYING (HONOURS) Construction Technology 1 (QSB 1514 / BLD60104) Assignment (Group Assignment, maximum 5 members) Total percentage: 25% Deadline: 4 pm, 8 June 2015 By taking the building you live in as the object of study in this assignment, your group need to produce the following: Part 1 Illustrate the type of the building with plan / sketches / photo / diagrams. Part 2 Identify and explain the (i) type of roof, (ii) type of windows and doors and (iii) type of stairs of the building with sketches / photo / diagrams. Part 3 Compare and contrast with ONE (1) other types and recommend an alternative to replace the existing type of (i) roof, (ii) window and door, (iii) staircase.