Cooling Technique of PEM fuel cell.pptx
•Download as PPTX, PDF•
0 likes•3 views
This document discusses the cooling technique of a proton exchange membrane (PEM) fuel cell. It aims to maintain an even operating temperature across the cell and capture waste heat for reuse. The problem involves analyzing heat transfer in a hydrogen-air PEM fuel cell, which generates electricity through an electrochemical reaction between hydrogen and oxygen that produces water. Assumptions will be made and heat transfer calculations performed to understand how to efficiently cool the fuel cell during operation.
Report
Share
Report
Share
Recommended
Components of pem fuel cells an overview
Fuel cells, as devices for direct conversion of the chemical energy of a fuel into
electricity by electrochemical reactions, are among the key enabling technologies for the transition
to a hydrogen-based economy. Among the various types of fuel cells, polymer electrolyte
membrane fuel cells (PEMFCs) are considered to be at the forefront for commercialization for
portable and transportation applications because of their high energy conversion efficiency and low
pollutant emission. Cost and durability of PEMFCs are the two major challenges that need to be
addressed to facilitate their commercialization. The properties of the membrane electrode assembly
(MEA) have a direct impact on both cost and durability of a PEMFC.
An overview is presented on the key components of the PEMFC MEA. The success of the MEA
and thereby PEMFC technology is believed to depend largely on two key materials: the membrane
and the electro-catalyst. These two key materials are directly linked to the major challenges faced in
PEMFC, namely, the performance, and cost. Concerted efforts are conducted globally for the past
couple of decades to address these challenges. This chapter aims to provide the reader an overview
of the major research findings to date on the key components of a PEMFC MEA.
ww.scientific.net/MSF.657.143
All
Maiyalagan, Components of pem fuel cells an overview
Fuel cells, as devices for direct conversion of the chemical energy of a fuel into
electricity by electrochemical reactions, are among the key enabling technologies for the transition
to a hydrogen-based economy. Among the various types of fuel cells, polymer electrolyte
membrane fuel cells (PEMFCs) are considered to be at the forefront for commercialization for
portable and transportation applications because of their high energy conversion efficiency and low
pollutant emission. Cost and durability of PEMFCs are the two major challenges that need to be
addressed to facilitate their commercialization. The properties of the membrane electrode assembly
(MEA) have a direct impact on both cost and durability of a PEMFC.
An overview is presented on the key components of the PEMFC MEA. The success of the MEA
and thereby PEMFC technology is believed to depend largely on two key materials: the membrane
and the electro-catalyst. These two key materials are directly linked to the major challenges faced in
PEMFC, namely, the performance, and cost. Concerted efforts are conducted globally for the past
couple of decades to address these challenges. This chapter aims to provide the reader an overview
of the major research findings to date on the key components of a PEMFC MEA.
Experimental analysis and modeling of proton exchange membrane fuel cell
Abstract Energy is the crucial input for the overall development of the country. The standard of living of a given country can be directly related to per capita energy consumption. The available non –renewable sources produces sewere pollution and depleting day by day whereas renewable sources are intermittent. What is required is a zero emission generation technology which gives cost effective and pollution free energy on large scale basis. Few technologies like hydrogen fuel cell are replacing by conventional sources. This paper proposes a comparison of experimental results of PEM fuel cell with the theoretical results. The experimental set up is fabricated and established in the laboratories. After performance the results are compared with theoretical model. The proposed (Theoretical) model also developed, tested and compared. The developed model permits the simulation of PEM fuel cell with different parameter and allows the investigation of its behavior for any operating condition. The theoretical analysis (Modeling) is carried out by MATLAB software. Keywords: PEM fuel cell, zero emission, modeling
Electronics system thermal management optimization using finite element and N...
The demand for high-performance, smaller-sized, and multi-functional electronics component
poses a great challenge to the thermal management issues in a printed circuit board (PCB)
design. Moreover, this thermal problem can affect the lifespan, performance, and the reliability of
the electronic system. This project presents the simulation of an optimal thermal distribution for various
samples of electronics components arrangement on PCB. The objectives are to find the optimum
components arrangement with minimal heat dissipation and cover small PCB area. Nelder-Mead
Optimization (NMO) with Finite Element method has been used to solve these multi-objective problems.
The results show that with the proper arrangement of electronics components, the area of PCB has been
reduced by 26% while the temperature of components is able to reduce up to 40%. Therefore, this study
significantly benefits for the case of thermal management and performance improvement onto the electronic
product and system.
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
The eternally intensifying exigency for electrical energy and the mount in the electricity expenditures due to the recent transience of the oil charges over and above to the desensitizing of the air standard resulting from the ejections of the obtaining energy transmutation devices have amplified exploration into substitute renewable proveniences of electrical energy. In today, there are six antithetical types of fuel cell
technologies attainable – molten carbonate fuel cells; phosphoric acid fuel cells; solid oxide fuel cells; alkaline fuel cells; polymer electrolyte membrane fuel cells and direct methanol-air fuel cells. Polymer electrolyte membrane (PEM) fuel cells – also known proton exchange membrane fuel cells, which are one of the uncomplicated types of fuel cell. PEMFC’s output power is unpredicted on nonlinearly on its output voltage and current. The output current of a proton exchange membrane fuel cell stack relies on the load located on that particular stack. This paper presents a 1.26 kW -24 Vdc PEMFC system and DC – DC boost converter topology used in 1.26 kW PEM fuel cell to fortify that the zenith obtainable output power
from a PEM membrane fuel cell is distributed to a load during a power outage bridging the start-up time and to optimize the health of the fuel cell membrane stack. A 1.26 kW – 24 Vdc PEMFC system is considered in this study as well as investigate how the output behaves.
Recommended
Components of pem fuel cells an overview
Fuel cells, as devices for direct conversion of the chemical energy of a fuel into
electricity by electrochemical reactions, are among the key enabling technologies for the transition
to a hydrogen-based economy. Among the various types of fuel cells, polymer electrolyte
membrane fuel cells (PEMFCs) are considered to be at the forefront for commercialization for
portable and transportation applications because of their high energy conversion efficiency and low
pollutant emission. Cost and durability of PEMFCs are the two major challenges that need to be
addressed to facilitate their commercialization. The properties of the membrane electrode assembly
(MEA) have a direct impact on both cost and durability of a PEMFC.
An overview is presented on the key components of the PEMFC MEA. The success of the MEA
and thereby PEMFC technology is believed to depend largely on two key materials: the membrane
and the electro-catalyst. These two key materials are directly linked to the major challenges faced in
PEMFC, namely, the performance, and cost. Concerted efforts are conducted globally for the past
couple of decades to address these challenges. This chapter aims to provide the reader an overview
of the major research findings to date on the key components of a PEMFC MEA.
ww.scientific.net/MSF.657.143
All
Maiyalagan, Components of pem fuel cells an overview
Fuel cells, as devices for direct conversion of the chemical energy of a fuel into
electricity by electrochemical reactions, are among the key enabling technologies for the transition
to a hydrogen-based economy. Among the various types of fuel cells, polymer electrolyte
membrane fuel cells (PEMFCs) are considered to be at the forefront for commercialization for
portable and transportation applications because of their high energy conversion efficiency and low
pollutant emission. Cost and durability of PEMFCs are the two major challenges that need to be
addressed to facilitate their commercialization. The properties of the membrane electrode assembly
(MEA) have a direct impact on both cost and durability of a PEMFC.
An overview is presented on the key components of the PEMFC MEA. The success of the MEA
and thereby PEMFC technology is believed to depend largely on two key materials: the membrane
and the electro-catalyst. These two key materials are directly linked to the major challenges faced in
PEMFC, namely, the performance, and cost. Concerted efforts are conducted globally for the past
couple of decades to address these challenges. This chapter aims to provide the reader an overview
of the major research findings to date on the key components of a PEMFC MEA.
Experimental analysis and modeling of proton exchange membrane fuel cell
Abstract Energy is the crucial input for the overall development of the country. The standard of living of a given country can be directly related to per capita energy consumption. The available non –renewable sources produces sewere pollution and depleting day by day whereas renewable sources are intermittent. What is required is a zero emission generation technology which gives cost effective and pollution free energy on large scale basis. Few technologies like hydrogen fuel cell are replacing by conventional sources. This paper proposes a comparison of experimental results of PEM fuel cell with the theoretical results. The experimental set up is fabricated and established in the laboratories. After performance the results are compared with theoretical model. The proposed (Theoretical) model also developed, tested and compared. The developed model permits the simulation of PEM fuel cell with different parameter and allows the investigation of its behavior for any operating condition. The theoretical analysis (Modeling) is carried out by MATLAB software. Keywords: PEM fuel cell, zero emission, modeling
Electronics system thermal management optimization using finite element and N...
The demand for high-performance, smaller-sized, and multi-functional electronics component
poses a great challenge to the thermal management issues in a printed circuit board (PCB)
design. Moreover, this thermal problem can affect the lifespan, performance, and the reliability of
the electronic system. This project presents the simulation of an optimal thermal distribution for various
samples of electronics components arrangement on PCB. The objectives are to find the optimum
components arrangement with minimal heat dissipation and cover small PCB area. Nelder-Mead
Optimization (NMO) with Finite Element method has been used to solve these multi-objective problems.
The results show that with the proper arrangement of electronics components, the area of PCB has been
reduced by 26% while the temperature of components is able to reduce up to 40%. Therefore, this study
significantly benefits for the case of thermal management and performance improvement onto the electronic
product and system.
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
The eternally intensifying exigency for electrical energy and the mount in the electricity expenditures due to the recent transience of the oil charges over and above to the desensitizing of the air standard resulting from the ejections of the obtaining energy transmutation devices have amplified exploration into substitute renewable proveniences of electrical energy. In today, there are six antithetical types of fuel cell
technologies attainable – molten carbonate fuel cells; phosphoric acid fuel cells; solid oxide fuel cells; alkaline fuel cells; polymer electrolyte membrane fuel cells and direct methanol-air fuel cells. Polymer electrolyte membrane (PEM) fuel cells – also known proton exchange membrane fuel cells, which are one of the uncomplicated types of fuel cell. PEMFC’s output power is unpredicted on nonlinearly on its output voltage and current. The output current of a proton exchange membrane fuel cell stack relies on the load located on that particular stack. This paper presents a 1.26 kW -24 Vdc PEMFC system and DC – DC boost converter topology used in 1.26 kW PEM fuel cell to fortify that the zenith obtainable output power
from a PEM membrane fuel cell is distributed to a load during a power outage bridging the start-up time and to optimize the health of the fuel cell membrane stack. A 1.26 kW – 24 Vdc PEMFC system is considered in this study as well as investigate how the output behaves.
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
The eternally intensifying exigency for electrical energy and the mount in the electricity expenditures due
to the recent transience of the oil charges over and above to the desensitizing of the air standard resulting
from the ejections of the obtaining energy transmutation devices have amplified exploration into substitute
renewable proveniences of electrical energy. In today, there are six antithetical types of fuel cell
technologies attainable – molten carbonate fuel cells; phosphoric acid fuel cells; solid oxide fuel cells;
alkaline fuel cells; polymer electrolyte membrane fuel cells and direct methanol-air fuel cells. Polymer
electrolyte membrane (PEM) fuel cells – also known proton exchange membrane fuel cells, which are one
of the uncomplicated types of fuel cell. PEMFC’s output power is unpredicted on nonlinearly on its output
voltage and current. The output current of a proton exchange membrane fuel cell stack relies on the load
located on that particular stack. This paper presents a 1.26 kW -24 Vdc PEMFC system and DC – DC
boost converter topology used in 1.26 kW PEM fuel cell to fortify that the zenith obtainable output power
from a PEM membrane fuel cell is distributed to a load during a power outage bridging the start-up time
and to optimize the health of the fuel cell membrane stack. A 1.26 kW – 24 Vdc PEMFC system is
considered in this study as well as investigate how the output behaves.
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...INFOGAIN PUBLICATION
The Effectiveness of using a Non-Platinum Catalyst for a Proton Exchange Membrane Fuel Cell (PEMFC)Experimental Study on Phase Change Material based Thermal Energy Storage System
https://irjet.net/archives/V4/i11/IRJET-V4I11331.pdf
cntsasfuelcells.pptx
Carbon nanotubes are the next generation materials and in this presentation the application of Carbon nanotubes as fuel cell materials have been discussed.
Study of Thermoelectric Air Conditioning for Automobiles
https://irjet.net/archives/V5/i1/IRJET-V5I1231.pdf
Pemfc ppt
Proton Exchange Membrane Fuel Cell Working, applications, merits and demerits.
How the fuel cell will be useful in future as a energy source.
2013.10.18 alfred piggott gentherm nrel sae thermoelectric battery thermal ma...
SAE Thermal Management Symposium presentation of distributed thermoelectric battery thermal management
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural Network
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural NetworkInternational Journal of Modern Research in Engineering and Technology
The fuel cell is currently considered as one of the most promising technologies for future energy
demand. Solid oxide fuel cells (SOFCs) have several advantages including flexibility of fuel used and relatively
inexpensive materials due to high temperature operation. SOFCs operate easily in the single-chamber mode
due to the simplified, compact, sealing-free cell structure. An artificial neural network (ANN) can be used as a
black-box tool to simulate systems without solving the physical equations merely by utilizing available
experimental data. In this study, the ANN is used for modelling a singular cell behavior. The error
backpropagation algorithm was used for an ANN training procedure. Experiments of a planar button solid
oxide fuel cell were used to train and verify the networks. The fuel cell system is fed by methane and oxygen. The
cathode is LSCF6482, the anode is GDC-Ni, the electrolyte is LDM and the operating pressure is 1 atm. The
ANN based SOFC model has the following input parameters: current density, temperature; and the cell voltage
is predicted by the model. Obtained results show that the ANN can be successfully used for modelling the single
chamber solid oxide fuel cell without knowledge of numerous physical, chemical, and electrochemical factors.Piezoelectric Thermo-Acoustic Refrigeration System with Peltier Module Energy...
https://www.irjet.net/archives/V9/i6/IRJET-V9I6153.pdf
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck Converter
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck ConverterInternational Journal of Power Electronics and Drive Systems
Alternative energy technologies are being popular for power generation applications nowadays. Among others, Fuel cell (FC) technology is quite popular. However, the FC unit is costly and vulnerable to any disturbances in input parameters. Thus, to perform research and experimentation, Fuel cell emulators (FCE) can be useful. FCEs can replicate actual FC behavior in different operating conditions. Thus, by using it the application area can be determined. In this study, a FCE system is modelled using MATLAB/Simulink®. The FCE system consists of a buck DC-DC converter and a proportional integral (PI) based controller incorporating an electrochemical model of proton exchange membrane fuel cell (PEMFC). The PEMFC model is used to generate reference voltage of the controller which takes the load current as a requirement. The characteristics are compared with Ballard Mark V 5kW PEMFC stack specifications obtained from the datasheet. The results show that the FCE system is a suitable replacement of real PEMFC stack and can be used for research and development purpose.DESIGN AND DEVELOPMENT OF SOLAR WATER HEATING SYSTEM USING PHASE CHANGE MATERIAL
https://www.irjet.net/archives/V10/i6/IRJET-V10I699.pdf
Combined Efficiency Calculation of Bismuth Telluride and Lead Telluride in Th...
Abstract:- The heat rejected from an internal combustion engine is dumped into the atmosphere as waste heat. If this waste heat energy is tapped and converted into usable energy, the overall efficiency of an engine can be improved. The percentage of energy rejected to the environment through exhaust gas is approximately 30-40%.The thermoelectric generators are used for power generation . Thermoelectric modules which are used in thermoelectric generators are solid state devices that are used to convert thermal energy from a temperature gradient to electrical energy and it works on basic principle of Seebeck effect. The objective of this project is to include fin effect to increase cooling rate , to reduce the temperature by increasing the temperature difference and to use long fin and avoid accumulation of heat in between fins . The TEG system is directly connected to the exhaust pipe and the amount of electricity generated by the thermoelectric material is directly proportional to their heated area . The materials used in TEG are Bi2Te3 - Bismuth Telluride and PbTe - Lead Telluride . Bi2Te3 module TEG is highly efficient in room temperature , but heat withstanding capacity of Bi2Te3 is less than PbTe.The combination of these thermoelectric materials are used for better efficiency . The testing is done for above conditions and experimental results with this setup are performed and presented.
Analysis and Design Methodology for Thermoelectric Power Generation System fr...
This paper combines heat transfer and
thermoelectric conversion techniques to create a
thermoelectric generator device for a single-cylinder, fourstroke petrol engine. The system is made up of heat absorbers,
thermoelectric generator, Thermoelectric Generator (TEG)
modules, and an external heat sink. To achieve the goal of
absorbing heat and increasing thermoelectric conversion
efficiently, the heat exchanger surface area and heat-exchange
time could be increased. Thermoelectric generators convert
waste heat into energy directly. This technology will also help
energy conversion systems work better overall. Despite the
fact that TEG production is limited by available technologies,
feasible electricity generation is possible from waste heat
generated by automobiles. The effect of using passive heat
sinks and heat absorbers made of a flat plate with fins of
various cross-sectional areas and materials with forced
convection heat transfer, as well as how current, voltage, and
power are varied, is investigated and presented in tabular
format in the current numerical analysis. By plotting the
results of the analytical and numerical method on relevant
graph, the results of both methods were compared
IRJET- A Modern Lightning System for Power Saving Application
https://www.irjet.net/archives/V6/i4/IRJET-V6I41202.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
More Related Content
Similar to Cooling Technique of PEM fuel cell.pptx
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
The eternally intensifying exigency for electrical energy and the mount in the electricity expenditures due
to the recent transience of the oil charges over and above to the desensitizing of the air standard resulting
from the ejections of the obtaining energy transmutation devices have amplified exploration into substitute
renewable proveniences of electrical energy. In today, there are six antithetical types of fuel cell
technologies attainable – molten carbonate fuel cells; phosphoric acid fuel cells; solid oxide fuel cells;
alkaline fuel cells; polymer electrolyte membrane fuel cells and direct methanol-air fuel cells. Polymer
electrolyte membrane (PEM) fuel cells – also known proton exchange membrane fuel cells, which are one
of the uncomplicated types of fuel cell. PEMFC’s output power is unpredicted on nonlinearly on its output
voltage and current. The output current of a proton exchange membrane fuel cell stack relies on the load
located on that particular stack. This paper presents a 1.26 kW -24 Vdc PEMFC system and DC – DC
boost converter topology used in 1.26 kW PEM fuel cell to fortify that the zenith obtainable output power
from a PEM membrane fuel cell is distributed to a load during a power outage bridging the start-up time
and to optimize the health of the fuel cell membrane stack. A 1.26 kW – 24 Vdc PEMFC system is
considered in this study as well as investigate how the output behaves.
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...INFOGAIN PUBLICATION
The Effectiveness of using a Non-Platinum Catalyst for a Proton Exchange Membrane Fuel Cell (PEMFC)Experimental Study on Phase Change Material based Thermal Energy Storage System
https://irjet.net/archives/V4/i11/IRJET-V4I11331.pdf
cntsasfuelcells.pptx
Carbon nanotubes are the next generation materials and in this presentation the application of Carbon nanotubes as fuel cell materials have been discussed.
Study of Thermoelectric Air Conditioning for Automobiles
https://irjet.net/archives/V5/i1/IRJET-V5I1231.pdf
Pemfc ppt
Proton Exchange Membrane Fuel Cell Working, applications, merits and demerits.
How the fuel cell will be useful in future as a energy source.
2013.10.18 alfred piggott gentherm nrel sae thermoelectric battery thermal ma...
SAE Thermal Management Symposium presentation of distributed thermoelectric battery thermal management
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural Network
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural NetworkInternational Journal of Modern Research in Engineering and Technology
The fuel cell is currently considered as one of the most promising technologies for future energy
demand. Solid oxide fuel cells (SOFCs) have several advantages including flexibility of fuel used and relatively
inexpensive materials due to high temperature operation. SOFCs operate easily in the single-chamber mode
due to the simplified, compact, sealing-free cell structure. An artificial neural network (ANN) can be used as a
black-box tool to simulate systems without solving the physical equations merely by utilizing available
experimental data. In this study, the ANN is used for modelling a singular cell behavior. The error
backpropagation algorithm was used for an ANN training procedure. Experiments of a planar button solid
oxide fuel cell were used to train and verify the networks. The fuel cell system is fed by methane and oxygen. The
cathode is LSCF6482, the anode is GDC-Ni, the electrolyte is LDM and the operating pressure is 1 atm. The
ANN based SOFC model has the following input parameters: current density, temperature; and the cell voltage
is predicted by the model. Obtained results show that the ANN can be successfully used for modelling the single
chamber solid oxide fuel cell without knowledge of numerous physical, chemical, and electrochemical factors.Piezoelectric Thermo-Acoustic Refrigeration System with Peltier Module Energy...
https://www.irjet.net/archives/V9/i6/IRJET-V9I6153.pdf
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck Converter
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck ConverterInternational Journal of Power Electronics and Drive Systems
Alternative energy technologies are being popular for power generation applications nowadays. Among others, Fuel cell (FC) technology is quite popular. However, the FC unit is costly and vulnerable to any disturbances in input parameters. Thus, to perform research and experimentation, Fuel cell emulators (FCE) can be useful. FCEs can replicate actual FC behavior in different operating conditions. Thus, by using it the application area can be determined. In this study, a FCE system is modelled using MATLAB/Simulink®. The FCE system consists of a buck DC-DC converter and a proportional integral (PI) based controller incorporating an electrochemical model of proton exchange membrane fuel cell (PEMFC). The PEMFC model is used to generate reference voltage of the controller which takes the load current as a requirement. The characteristics are compared with Ballard Mark V 5kW PEMFC stack specifications obtained from the datasheet. The results show that the FCE system is a suitable replacement of real PEMFC stack and can be used for research and development purpose.DESIGN AND DEVELOPMENT OF SOLAR WATER HEATING SYSTEM USING PHASE CHANGE MATERIAL
https://www.irjet.net/archives/V10/i6/IRJET-V10I699.pdf
Combined Efficiency Calculation of Bismuth Telluride and Lead Telluride in Th...
Abstract:- The heat rejected from an internal combustion engine is dumped into the atmosphere as waste heat. If this waste heat energy is tapped and converted into usable energy, the overall efficiency of an engine can be improved. The percentage of energy rejected to the environment through exhaust gas is approximately 30-40%.The thermoelectric generators are used for power generation . Thermoelectric modules which are used in thermoelectric generators are solid state devices that are used to convert thermal energy from a temperature gradient to electrical energy and it works on basic principle of Seebeck effect. The objective of this project is to include fin effect to increase cooling rate , to reduce the temperature by increasing the temperature difference and to use long fin and avoid accumulation of heat in between fins . The TEG system is directly connected to the exhaust pipe and the amount of electricity generated by the thermoelectric material is directly proportional to their heated area . The materials used in TEG are Bi2Te3 - Bismuth Telluride and PbTe - Lead Telluride . Bi2Te3 module TEG is highly efficient in room temperature , but heat withstanding capacity of Bi2Te3 is less than PbTe.The combination of these thermoelectric materials are used for better efficiency . The testing is done for above conditions and experimental results with this setup are performed and presented.
Analysis and Design Methodology for Thermoelectric Power Generation System fr...
This paper combines heat transfer and
thermoelectric conversion techniques to create a
thermoelectric generator device for a single-cylinder, fourstroke petrol engine. The system is made up of heat absorbers,
thermoelectric generator, Thermoelectric Generator (TEG)
modules, and an external heat sink. To achieve the goal of
absorbing heat and increasing thermoelectric conversion
efficiently, the heat exchanger surface area and heat-exchange
time could be increased. Thermoelectric generators convert
waste heat into energy directly. This technology will also help
energy conversion systems work better overall. Despite the
fact that TEG production is limited by available technologies,
feasible electricity generation is possible from waste heat
generated by automobiles. The effect of using passive heat
sinks and heat absorbers made of a flat plate with fins of
various cross-sectional areas and materials with forced
convection heat transfer, as well as how current, voltage, and
power are varied, is investigated and presented in tabular
format in the current numerical analysis. By plotting the
results of the analytical and numerical method on relevant
graph, the results of both methods were compared
IRJET- A Modern Lightning System for Power Saving Application
https://www.irjet.net/archives/V6/i4/IRJET-V6I41202.pdf
Similar to Cooling Technique of PEM fuel cell.pptx (20)
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
STUDY OF 1.26 KW – 24 VDC PROTON EXCHANGE MEMBRANE FUEL CELL’S (PEMFC’S) PARA...
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...
1 ijaems dec-2015-1-the effectiveness of using a non-platinum catalyst for a ...
Experimental Study on Phase Change Material based Thermal Energy Storage System
Experimental Study on Phase Change Material based Thermal Energy Storage System
Study of Thermoelectric Air Conditioning for Automobiles
Study of Thermoelectric Air Conditioning for Automobiles
2013.10.18 alfred piggott gentherm nrel sae thermoelectric battery thermal ma...
2013.10.18 alfred piggott gentherm nrel sae thermoelectric battery thermal ma...
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural Network
Modelling the Single Chamber Solid Oxide Fuel Cell by Artificial Neural Network
Piezoelectric Thermo-Acoustic Refrigeration System with Peltier Module Energy...
Piezoelectric Thermo-Acoustic Refrigeration System with Peltier Module Energy...
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck Converter
Proton Exchange Membrane Fuel Cell Emulator Using PI Controlled Buck Converter
DESIGN AND DEVELOPMENT OF SOLAR WATER HEATING SYSTEM USING PHASE CHANGE MATERIAL
DESIGN AND DEVELOPMENT OF SOLAR WATER HEATING SYSTEM USING PHASE CHANGE MATERIAL
Combined Efficiency Calculation of Bismuth Telluride and Lead Telluride in Th...
Combined Efficiency Calculation of Bismuth Telluride and Lead Telluride in Th...
Analysis and Design Methodology for Thermoelectric Power Generation System fr...
Analysis and Design Methodology for Thermoelectric Power Generation System fr...
IRJET- A Modern Lightning System for Power Saving Application
IRJET- A Modern Lightning System for Power Saving Application
Dynamic modeling, simulation of a small wind fuel cell hybrid
Dynamic modeling, simulation of a small wind fuel cell hybrid
Recently uploaded
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Ppt on evs amity University project work.........................??????!?!?!?!!?!!?!!?/?/?/?/?/?
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
一比一原版(UMich毕业证)密歇根大学|安娜堡分校毕业证成绩单专业办理
UMich毕业证原版定制【微信：176555708】【密歇根大学|安娜堡分校毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
一比一原版(SFU毕业证)西蒙菲莎大学毕业证成绩单如何办理
SFU毕业证原版定制【微信：176555708】【西蒙菲莎大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Hierarchical Digital Twin of a Naval Power System
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Building Electrical System Design & Installation
Guide for Building Electrical System Design & Installation
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Fundamentals of Electric Drives and its applications.pptx
Fundamentals of Electric Drives and its applications.pptx
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Cooling Technique of PEM fuel cell.pptx
- 1. Title: Presented by: Rajesh Datta (14200720002) Heat Transfer ~ PC-ME501 25-Aug-22 Department of Mechanical Engineering 1 Cooling Technique of the PEM fuel cell.
- 2. Contents: Process Objective of the HT analysis Problem Statement Schematic Assumptions Analysis Comments 25-Aug-22 Heat Transfer Activity-1 2
- 3. Process 25-Aug-22 Heat Transfer Activity-1 3 What is Proton Exchange Membrane Fuel Cell? • Used for:- 1. Transport Application 2. Stationary Applications 3. Portable Fuel Cell Application
- 4. How it works? 25-Aug-22 Heat Transfer Activity-1 4
- 5. Objective of the HT analysis 25-Aug-22 Heat Transfer Activity-1 5 • Maintain the cell at a uniform operating temperature. • Capturing the produced heat and repurposing it using one of the Waste Heat Recovery (WHR) technologies.
- 6. Problem Statement 25-Aug-22 Heat Transfer Activity-1 6 A hydrogen-air Proton Exchange Membrane (PEM) fuel cell is illustrated below. It consists of a electrolytic membrane sandwiched between porous cathode and anode materials, forming a very thin, three-layer membrane electrode assembly (MEA). At the anode, porotons and electrons are generated (2H2 4H+ + 4e-), while at the chathode the protons and the electrons recombine to from water (O2 + 4e-+4H+ 2H2O). The overall reaction is then 2H2+O2 2H2O. The dual role of the electrolytic membrane is to transfer hydrogen ions and serve as a barrier to electron transfer, forcing the electrons to the electoral load that is external to the fuel cell.
- 7. Schematic 25-Aug-22 Heat Transfer Activity-1 7
- 8. Assumptions 25-Aug-22 Heat Transfer Activity-1 8
- 9. Analysis 25-Aug-22 Heat Transfer Activity-1 9
- 10. 25-Aug-22 Heat Transfer Activity-1 10
- 11. Comments 25-Aug-22 Heat Transfer Activity-1 11
- 12. 25-Aug-22 Heat Transfer Activity-1 12 Thank You