Consulting proposal.pptx
•Download as PPTX, PDF•
0 likes•2 views
This document is a project report for an automatic hand brake release system. It includes the team members, project guide, and outlines the following sections: introduction, system diagram, block diagram, working principle, advantages, and disadvantages. The system uses compressed air from a compressor to power a pneumatic double acting cylinder to automatically release the hand brake through a solenoid valve controlled by a microcontroller. The main advantage is reducing manual effort, while maintenance of components is required. The system could be applied to heavy vehicles.
Report
Share
Report
Share
Recommended
Iintelligence braking system
This document describes an intelligent reverse braking system that uses ultrasonic sensors and pneumatic brakes to automatically stop a vehicle if an obstacle is detected while reversing. The system works by using IR sensors to detect obstacles and send a signal to activate a solenoid valve, which releases compressed air to engage a pneumatic cylinder and apply the brakes. It discusses the components, operation, and benefits of the system for improving safety when reversing. The document also outlines potential future applications involving more advanced driver assistance systems and autonomous parking/driving capabilities.
Project report-intelligent-breaking-system-
The document describes an intelligent braking system for vehicles. It uses IR sensors and pneumatic braking circuits. The system can stop a vehicle traveling at 50 km/h within 2-3 seconds. It aims to provide safe and automatic parking by judging the proper braking distance between the vehicle and any obstacles. The system components include a frame, pneumatic cylinder, solenoid valve, DC motor, IR sensor, and compressor. When the IR sensor detects an obstacle, it sends a signal to activate the solenoid valve, applying air pressure to the cylinder to engage the brakes. The document discusses the system construction, components, materials used, and provides specifications for the pneumatic cylinder.
6.atomatic clutch and breking system 2
The document provides information about an intelligent braking system project. It discusses the need for the new system to safely stop vehicles within 2-3 seconds at 50 km/h speed. It aims to introduce automation and rapid response during parking through an electronic braking system. The system uses IR sensors and a pneumatic braking circuit to automatically apply brakes when an obstacle is detected during parking. It is intended to provide safety and avoid vehicle damage during parking.
1FINAL STAGE 1 REPORT.pdf
This document provides a stage-I report on an ignition switch operated hand brake project. It includes an introduction describing the objectives to enhance handbrake performance and avoid accidents. It reviews previous work on automatic parking brakes. The design concept uses a DC motor, spur gear, and worm gear to actuate the handbrake lever linearly via a cable. Analytical calculations are shown to design the gears and select motor specifications. The proposed system would apply the parking brake within 1 second by winding a cable around the output shaft twice. This summary provides the key details and purpose of the project report in 3 sentences.
Chapter 45
Cruise control maintains a constant vehicle speed without driver pressure on the accelerator pedal. It uses a servo unit, control module, and speed set control. Diagnosis involves checking switches, cables, vacuum lines, and servo unit. Power windows use electric motors controlled by master and independent switches. The window regulator raises and lowers the glass. HomeLink programs the vehicle to operate garage door openers and other devices.
Advance Drive Interface, Brake Health Monitor
This document describes a proposed brake health monitor system that would provide drivers with information about the condition of their vehicle's braking system. The system uses sensors to measure brake fluid pressure and disc temperature. It transmits the sensor data wirelessly via an Arduino microcontroller to a dashboard-mounted touchscreen interface. The interface displays real-time readings of brake pressure, temperature, and alerts the driver of any issues detected, such as fluid leaks. The system was modeled and simulated in Simulink to test how it would function and identify pressure leaks. Its goal is to help prevent accidents caused by undetected brake failures.
IRJET- Automatic Hand Brake System
This document describes a proposed automatic hand brake system for vehicles that reduces the human effort required to engage the parking brake. The system uses a hydraulic circuit connected to the vehicle's ignition system to automatically apply the parking brake when the ignition is turned off. The hydraulic circuit includes a gear pump, solenoid valve, pressure relief valve, single-acting actuator, and hydraulic lines. When the ignition is on, the pump pressurizes the hydraulic fluid to open the solenoid valve and extend the actuator, releasing the brake. When the ignition is turned off, the solenoid closes and hydraulic fluid returns through the valve, retracting the actuator and engaging the brake. The system was experimentally tested on a model to demonstrate automatic brake
Manual reparacion Jeep Compass - Patriot Limited 2007-2009_Wiper washer
The document provides details about the front and rear wiper and washer systems for a 2009 Jeep Patriot. It describes the major components of each system such as the wiper arms and blades, wiper modules, washer pump and reservoir. It explains that the systems are electrically operated and controlled by modules like the TIPM and EMIC. The right multi-function switch initiates wiper and washer functions and the steering control module sends commands to the other modules to operate the systems.
Recommended
Iintelligence braking system
This document describes an intelligent reverse braking system that uses ultrasonic sensors and pneumatic brakes to automatically stop a vehicle if an obstacle is detected while reversing. The system works by using IR sensors to detect obstacles and send a signal to activate a solenoid valve, which releases compressed air to engage a pneumatic cylinder and apply the brakes. It discusses the components, operation, and benefits of the system for improving safety when reversing. The document also outlines potential future applications involving more advanced driver assistance systems and autonomous parking/driving capabilities.
Project report-intelligent-breaking-system-
The document describes an intelligent braking system for vehicles. It uses IR sensors and pneumatic braking circuits. The system can stop a vehicle traveling at 50 km/h within 2-3 seconds. It aims to provide safe and automatic parking by judging the proper braking distance between the vehicle and any obstacles. The system components include a frame, pneumatic cylinder, solenoid valve, DC motor, IR sensor, and compressor. When the IR sensor detects an obstacle, it sends a signal to activate the solenoid valve, applying air pressure to the cylinder to engage the brakes. The document discusses the system construction, components, materials used, and provides specifications for the pneumatic cylinder.
6.atomatic clutch and breking system 2
The document provides information about an intelligent braking system project. It discusses the need for the new system to safely stop vehicles within 2-3 seconds at 50 km/h speed. It aims to introduce automation and rapid response during parking through an electronic braking system. The system uses IR sensors and a pneumatic braking circuit to automatically apply brakes when an obstacle is detected during parking. It is intended to provide safety and avoid vehicle damage during parking.
1FINAL STAGE 1 REPORT.pdf
This document provides a stage-I report on an ignition switch operated hand brake project. It includes an introduction describing the objectives to enhance handbrake performance and avoid accidents. It reviews previous work on automatic parking brakes. The design concept uses a DC motor, spur gear, and worm gear to actuate the handbrake lever linearly via a cable. Analytical calculations are shown to design the gears and select motor specifications. The proposed system would apply the parking brake within 1 second by winding a cable around the output shaft twice. This summary provides the key details and purpose of the project report in 3 sentences.
Chapter 45
Cruise control maintains a constant vehicle speed without driver pressure on the accelerator pedal. It uses a servo unit, control module, and speed set control. Diagnosis involves checking switches, cables, vacuum lines, and servo unit. Power windows use electric motors controlled by master and independent switches. The window regulator raises and lowers the glass. HomeLink programs the vehicle to operate garage door openers and other devices.
Advance Drive Interface, Brake Health Monitor
This document describes a proposed brake health monitor system that would provide drivers with information about the condition of their vehicle's braking system. The system uses sensors to measure brake fluid pressure and disc temperature. It transmits the sensor data wirelessly via an Arduino microcontroller to a dashboard-mounted touchscreen interface. The interface displays real-time readings of brake pressure, temperature, and alerts the driver of any issues detected, such as fluid leaks. The system was modeled and simulated in Simulink to test how it would function and identify pressure leaks. Its goal is to help prevent accidents caused by undetected brake failures.
IRJET- Automatic Hand Brake System
This document describes a proposed automatic hand brake system for vehicles that reduces the human effort required to engage the parking brake. The system uses a hydraulic circuit connected to the vehicle's ignition system to automatically apply the parking brake when the ignition is turned off. The hydraulic circuit includes a gear pump, solenoid valve, pressure relief valve, single-acting actuator, and hydraulic lines. When the ignition is on, the pump pressurizes the hydraulic fluid to open the solenoid valve and extend the actuator, releasing the brake. When the ignition is turned off, the solenoid closes and hydraulic fluid returns through the valve, retracting the actuator and engaging the brake. The system was experimentally tested on a model to demonstrate automatic brake
Manual reparacion Jeep Compass - Patriot Limited 2007-2009_Wiper washer
The document provides details about the front and rear wiper and washer systems for a 2009 Jeep Patriot. It describes the major components of each system such as the wiper arms and blades, wiper modules, washer pump and reservoir. It explains that the systems are electrically operated and controlled by modules like the TIPM and EMIC. The right multi-function switch initiates wiper and washer functions and the steering control module sends commands to the other modules to operate the systems.
IRJET- Automatic Pneumatic Bumper Shock Absorber and Breaking System
1. The document describes an automatic pneumatic bumper shock absorber and breaking system designed to improve vehicle safety.
2. The system uses an ultrasonic sensor to detect obstacles within 1.5 meters of the vehicle. If an obstacle is detected, the sensor sends a signal to activate the pneumatic bumper and automatically apply the brakes to slow the vehicle.
3. The pneumatic bumper is designed to retract and extend via a pneumatic cylinder to absorb impact forces and reduce damage in the event of a collision. The system is intended to improve response time during braking and control vehicle speed to reduce accident risks.
adptive cruise control report
Cruise control systems in cars have evolved from conventional cruise control to adaptive cruise control systems. Conventional cruise control allows the driver to set a speed which the car will then maintain. Adaptive cruise control uses radar or cameras to automatically adjust the car's speed to maintain a safe following distance from the vehicle ahead. This document provides details on the technology behind adaptive cruise control systems, including how they use millimeter-wave radar, stereo cameras, image processors and other components to sense the distance to the vehicle ahead and control the car's speed accordingly through the throttle and brakes. Adaptive cruise control provides a more advanced form of cruise control that enhances safety and driver comfort.
IRJET- Individual Wheel Control and Hand Brake System
This document describes an individual wheel control and hand brake system for vehicles. It begins with an abstract that outlines an innovative idea to replace the traditional brake lever with a switch-type hand braking system. This would help overcome issues like lever jamming. It then provides details on how the system works, which includes a brake pedal, master cylinder, brake drum, control switch, and brake lines. The control switch can control the pressure of brake oil passing through it to individually apply brakes to wheels. Advantages over traditional hand brakes include more effective braking ability and ability to brake individual wheels, such as if one is stuck in mud. The document also provides background information on hydraulic braking systems, master cylinders, and
Dissertation - Design of a Formula Student Race Car Spring, Damper and Anti-R...
This document summarizes the design of a spring, damper, and anti-roll bar system for a Formula Student race car. It discusses suspension system requirements and concepts, including a double wishbone suspension. It uses decision matrices to select a pull-rod design for the front suspension and a push-rod design for the rear. Rocker-integrated anti-roll bars were selected over wishbone-linked designs. The document analyzes chassis kinematics and selects damper and spring designs. It provides details on the final front and rear suspension system designs, including motion ratios, component designs, and how they meet requirements.
automatic braking system and brake actuation before collison
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
IRJET- Modification and Implementation of Automatic Hand Brake System using S...
This document describes a proposed modification to an automatic hand brake system for vehicles using sensors. The current conventional hand brake system relies on manual operation and can result in safety issues if the brake is accidentally left engaged while the vehicle is moving.
The proposed system aims to automate the hand brake engagement and release using sensors to address safety problems. It would integrate the hand brake mechanism with the vehicle's ignition system and seatbelt sensors. This would automatically apply the parking brake when the vehicle is stopped and the ignition is switched off, helping to ensure the brake is always engaged when parked. Sensors would also automatically release the brake if it remains engaged once the vehicle starts moving.
The system design incorporates a solenoid actuator,
Automatic Braking System
Semester Project: Automatic Braking System for safety Hazards
@University of Engineering and Technology lahore KSK Campus
Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System
A shock absorber is a mechanical device designed to smooth out or damp a sudden shock impulse and dissipate kinetic energy. Without shock absorbers, the vehicle would have a bouncing ride, as energy is stored in the spring and then released to the vehicle, possibly exceeding the allowed range of suspension movement, Control of excessive suspension movement without shock absorption requires stiffer springs, which would in turn give a harsh ride. Shock absorbers allow the use of soft springs while controlling the rate of suspension movement in response to bumps. Now the project has mainly concentrated in designing a suitable suspension unit. The limit sensor is fixed to the front wheel. When the front wheel is in bounce, the limit sensor activates the pneumatic compressor automatically with the help of electronic control unit. Now the compressor starts running, activating the hydro pneumatic suspensor which is fitted in the back wheel. In a vehicle it reduces the effect of suspension travel on uneven terrains. Hydraulic system undergo torque multiplication in an easy way, independent of distance between input and output. Pneumatic system is based on the fact that gas is compressible so equipment is less subjected to shock loads. M. Boopathi | S. R. Gauthamnithin | S. Harikrishnan | Prof. Dr. G. Kumaresan"Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd10916.pdf http://www.ijtsrd.com/engineering/automotive-engineering/10916/hydro-pneumatic-suspension-with-intelligent-active-suspensioning-system/m-boopathi
ab_manual-e.pdf
This document provides an overview of brakes and braking concepts relevant to commercial vehicles with air brakes. It discusses how heat, energy, traction and friction relate to braking and how braking force required increases with speed and weight. Specifically:
- Braking converts the energy of motion into heat energy through friction between brake drums/pads and rotors/linings.
- Stopping distance depends on vehicle speed and weight - doubling either requires 4x or 8x the braking force respectively to stop in the same distance.
- Braking systems use leverage and air pressure to multiply the applied braking force for improved stopping power.
Stopping Distance
The distance required to stop a vehicle depends on
130 223
The document provides a summary of fault codes for the MID 130 transmission control unit. It lists parameter IDs, proprietary parameter IDs, and subsystem IDs that may generate fault codes, along with a page reference for more details on each one. Parameter IDs include sensors for range cylinder position, split cylinder position, clutch cylinder position, clutch wear status, air pressure, and more. Subsystem IDs include solenoid valves and PWM valves that control transmission functions. This provides technicians with a starting point to research specific fault codes for the MID 130 transmission control module.
Final Year Mecahnical Engneering Project 2024
WATCH DEDICATED PROJECT VIDEO: https://youtu.be/5X1VgOhPllM?si=kKQwpAuuxPWcZIn0
NOTE: Copy the above Link and paste on Youtube.
DESCRIPYION:
The handbrake, also known as the parking brake, is a vital safety feature in automobiles, ensuring that the vehicle remains stationary when parked and acting as a backup in case of main brake failure. Traditionally operated by a manual lever, the handbrake can sometimes be inadvertently left engaged while driving. This can lead to severe damage due to heat generation in the brake drum and shoes, compromising the vehicle's braking efficiency and safety.
To address this issue, we propose the design and fabrication of an automatic handbrake release system based entirely on mechanical mechanisms. This innovative system aims to eliminate the risk of human error associated with manual handbrake operation, ensuring reliable engagement and disengagement without the need for electronic sensors or controls.
M.a.r.s mechanized air refilling system
Every section of an automobile is getting automated except one- Tires. To inflate a tire, the driver has to go
to a gas station or he has to attach a pump manually. Both these involve human labor. This project is
aimed at removing such unwanted strain and save time. The system has a dedicated unit for filling air
whenever required. A control unit which is a pic microcontroller is the brain of the system. When the
pressure level is below the threshold value chosen by the driver, the system displays it. The driver then may
choose to refill the air automatically. A compact pump does the job. Another problem in tires is a puncture.
A sudden puncture can cause the driver to lose control, culminating in an accident. The project’s minor
objective revolves around this. During a puncture the air pressure reduces suddenly. This reduction in
pressure over a time limit is identified as a puncture. It warns the driver of a puncture and saves life. The
other way of detecting a puncture is by calculating the ON time of the pump. If the pump is in ON state for
a long time and there is no improvement in the pressure level it is recognized as a puncture. It also saves a
lot of money by giving more longevity to the tire and better mileage. As the tire is filled with optimum air,
the friction between the tire and the road is maintained properly. Henceforth, the tire is not damaged much
and the fuel consumption is reduced. The project is destined to be a life and money saver.
M.A.R.S - Mechanized Air Refilling System
1. The document describes M.A.R.S (Mechanized Air Refilling System), a system that automatically refills tire pressure in vehicles. It aims to remove the need for manual labor in refilling tires and save time.
2. M.A.R.S consists of a control unit, pumping unit, and display unit. The control unit coordinates the system and monitors tire pressure. The pumping unit includes compact pumps attached to each tire to refill air. The display unit allows the driver to select pressure thresholds and view pressure levels.
3. The system can automatically refill tires when pressure is low and detect punctures by monitoring for sudden pressure drops over time. Maintaining optimal tire pressure
Automated hand Brake
The handbrake is an important part of an automobile which is known as latching brake It is mostly used while parking, thus also called as parking brake.
handbrake is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals.
In automobiles e-brakes usually consist of a cable directly connected to a brake mechanism on one end and to some type of mechanism that can be actuated by the driver on the other end.
the mechanisms is often a hand–operated lever, on the floor on either side of the driver.
a pull handle located below and near the steering wheel column, or a pedal.
Clutch of Motor Bike
This presentation gives complete information about the clutch of motor bike that how does it works. What components make a prefect clutch.
Paper on PLC
This document describes a systematic approach to developing a PLC program for automating a glass handling gantry system in the automobile industry. The system uses a gantry with rack and pinion drive to pick front glass from a conveyor and assemble it onto a vehicle body. Sensors including encoders, limit switches and a barcode reader provide position feedback to the PLC to control servo motors and achieve high positional accuracy. The document outlines the mechanical design, sensor integration, programming approach, and concludes the automation improves safety, productivity and reduces costs compared to manual assembly.
6.a combined pedal for brake and accelerator
This document describes the design of a combined brake and accelerator pedal for automobiles. Some car accidents are caused when the driver mistakenly presses the accelerator instead of the brake during emergencies. The design aims to reduce the time it takes to shift the foot between pedals by combining them into a single pedal. The single pedal is pivotally mounted and connected to both the brake and accelerator systems such that pressing the top activates acceleration and pressing the bottom engages the brakes. This allows braking and accelerating with one foot while preventing errors and interference between the two functions. The document outlines the working mechanism, advantages in reducing accidents, and aims to decrease the accident rate through this innovative pedal design.
IRJET- A Review on Safety Parking Brake Arrangement Actuated by Seatbelt
This document summarizes research on safety systems for vehicles that link the operation of the parking brake to the use of seatbelts. It discusses several previous studies that developed mechanisms to engage the parking brake if the driver is not wearing a seatbelt. The introduction provides background on the need to ensure driver safety through compulsory seatbelt use. It then describes the proposed system, which uses a pneumatic cylinder and circuit connected to the parking brake and sensors to check for seatbelt use and prevent vehicle movement if belts are not fastened. The document reviews 14 other related studies on topics like seatbelt safety systems, intelligent brake control systems, and optimizing seatbelt anchorage locations to minimize occupant injury. It concludes by describing the typical
AntilockBrakingSystem.pdf
The document discusses the Antilock Braking System (ABS). It begins by explaining that ABS prevents brakes from locking during braking by modulating brake pressure. It then describes the key subsystems of ABS, including wheel speed sensors, electronic control unit, and hydraulic pressure modulator. The document outlines the importance of ABS in improving vehicle stability, steerability, and reducing stopping distances. It concludes by stating that ABS helps drivers maintain control of their vehicle under hard braking conditions on slippery roads.
Advanced Brake Assistance System
In recent years the numbers of cars has been increasing. Due to which day by day
accidents are increasing more & more simultaneously. Unfortunately, many accidents caused by driving
on the opposite side of the road, inappropriate speed and insufficient distance from other vehicles and it
might have been prevented, if vehicle had been able to brake faster in emergency situation. The goal or
idea of the project is to develop the system to support the driver is emphasized in critical braking
situation. A probability based framework was developed and tested in emergency situation. As the
components were added to the algorithm, greater benefits were realized. The result indicates that time
taken to apply brake is less in emergency situation than the normal situation. Also taking the driver
reaction time in account we can assist the driver and avoid accident and hence improve the safety
parameters regarding to brakes. Thus the system reduces the number of car accidents mostly caused by
human errors .Also make brake assist available for commercial cars at lowest range
欧洲杯投注-欧洲杯投注冠军赔率-欧洲杯投注夺冠赔率|【网址🎉ac55.net🎉】
【网址🎉ac55.net🎉】欧洲杯投注是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯投注。欧洲杯投注现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
退学办理【微信号:176555708】【退学办理(Curtin毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
More Related Content
Similar to Consulting proposal.pptx
IRJET- Automatic Pneumatic Bumper Shock Absorber and Breaking System
1. The document describes an automatic pneumatic bumper shock absorber and breaking system designed to improve vehicle safety.
2. The system uses an ultrasonic sensor to detect obstacles within 1.5 meters of the vehicle. If an obstacle is detected, the sensor sends a signal to activate the pneumatic bumper and automatically apply the brakes to slow the vehicle.
3. The pneumatic bumper is designed to retract and extend via a pneumatic cylinder to absorb impact forces and reduce damage in the event of a collision. The system is intended to improve response time during braking and control vehicle speed to reduce accident risks.
adptive cruise control report
Cruise control systems in cars have evolved from conventional cruise control to adaptive cruise control systems. Conventional cruise control allows the driver to set a speed which the car will then maintain. Adaptive cruise control uses radar or cameras to automatically adjust the car's speed to maintain a safe following distance from the vehicle ahead. This document provides details on the technology behind adaptive cruise control systems, including how they use millimeter-wave radar, stereo cameras, image processors and other components to sense the distance to the vehicle ahead and control the car's speed accordingly through the throttle and brakes. Adaptive cruise control provides a more advanced form of cruise control that enhances safety and driver comfort.
IRJET- Individual Wheel Control and Hand Brake System
This document describes an individual wheel control and hand brake system for vehicles. It begins with an abstract that outlines an innovative idea to replace the traditional brake lever with a switch-type hand braking system. This would help overcome issues like lever jamming. It then provides details on how the system works, which includes a brake pedal, master cylinder, brake drum, control switch, and brake lines. The control switch can control the pressure of brake oil passing through it to individually apply brakes to wheels. Advantages over traditional hand brakes include more effective braking ability and ability to brake individual wheels, such as if one is stuck in mud. The document also provides background information on hydraulic braking systems, master cylinders, and
Dissertation - Design of a Formula Student Race Car Spring, Damper and Anti-R...
This document summarizes the design of a spring, damper, and anti-roll bar system for a Formula Student race car. It discusses suspension system requirements and concepts, including a double wishbone suspension. It uses decision matrices to select a pull-rod design for the front suspension and a push-rod design for the rear. Rocker-integrated anti-roll bars were selected over wishbone-linked designs. The document analyzes chassis kinematics and selects damper and spring designs. It provides details on the final front and rear suspension system designs, including motion ratios, component designs, and how they meet requirements.
automatic braking system and brake actuation before collison
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
IRJET- Modification and Implementation of Automatic Hand Brake System using S...
This document describes a proposed modification to an automatic hand brake system for vehicles using sensors. The current conventional hand brake system relies on manual operation and can result in safety issues if the brake is accidentally left engaged while the vehicle is moving.
The proposed system aims to automate the hand brake engagement and release using sensors to address safety problems. It would integrate the hand brake mechanism with the vehicle's ignition system and seatbelt sensors. This would automatically apply the parking brake when the vehicle is stopped and the ignition is switched off, helping to ensure the brake is always engaged when parked. Sensors would also automatically release the brake if it remains engaged once the vehicle starts moving.
The system design incorporates a solenoid actuator,
Automatic Braking System
Semester Project: Automatic Braking System for safety Hazards
@University of Engineering and Technology lahore KSK Campus
Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System
A shock absorber is a mechanical device designed to smooth out or damp a sudden shock impulse and dissipate kinetic energy. Without shock absorbers, the vehicle would have a bouncing ride, as energy is stored in the spring and then released to the vehicle, possibly exceeding the allowed range of suspension movement, Control of excessive suspension movement without shock absorption requires stiffer springs, which would in turn give a harsh ride. Shock absorbers allow the use of soft springs while controlling the rate of suspension movement in response to bumps. Now the project has mainly concentrated in designing a suitable suspension unit. The limit sensor is fixed to the front wheel. When the front wheel is in bounce, the limit sensor activates the pneumatic compressor automatically with the help of electronic control unit. Now the compressor starts running, activating the hydro pneumatic suspensor which is fitted in the back wheel. In a vehicle it reduces the effect of suspension travel on uneven terrains. Hydraulic system undergo torque multiplication in an easy way, independent of distance between input and output. Pneumatic system is based on the fact that gas is compressible so equipment is less subjected to shock loads. M. Boopathi | S. R. Gauthamnithin | S. Harikrishnan | Prof. Dr. G. Kumaresan"Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd10916.pdf http://www.ijtsrd.com/engineering/automotive-engineering/10916/hydro-pneumatic-suspension-with-intelligent-active-suspensioning-system/m-boopathi
ab_manual-e.pdf
This document provides an overview of brakes and braking concepts relevant to commercial vehicles with air brakes. It discusses how heat, energy, traction and friction relate to braking and how braking force required increases with speed and weight. Specifically:
- Braking converts the energy of motion into heat energy through friction between brake drums/pads and rotors/linings.
- Stopping distance depends on vehicle speed and weight - doubling either requires 4x or 8x the braking force respectively to stop in the same distance.
- Braking systems use leverage and air pressure to multiply the applied braking force for improved stopping power.
Stopping Distance
The distance required to stop a vehicle depends on
130 223
The document provides a summary of fault codes for the MID 130 transmission control unit. It lists parameter IDs, proprietary parameter IDs, and subsystem IDs that may generate fault codes, along with a page reference for more details on each one. Parameter IDs include sensors for range cylinder position, split cylinder position, clutch cylinder position, clutch wear status, air pressure, and more. Subsystem IDs include solenoid valves and PWM valves that control transmission functions. This provides technicians with a starting point to research specific fault codes for the MID 130 transmission control module.
Final Year Mecahnical Engneering Project 2024
WATCH DEDICATED PROJECT VIDEO: https://youtu.be/5X1VgOhPllM?si=kKQwpAuuxPWcZIn0
NOTE: Copy the above Link and paste on Youtube.
DESCRIPYION:
The handbrake, also known as the parking brake, is a vital safety feature in automobiles, ensuring that the vehicle remains stationary when parked and acting as a backup in case of main brake failure. Traditionally operated by a manual lever, the handbrake can sometimes be inadvertently left engaged while driving. This can lead to severe damage due to heat generation in the brake drum and shoes, compromising the vehicle's braking efficiency and safety.
To address this issue, we propose the design and fabrication of an automatic handbrake release system based entirely on mechanical mechanisms. This innovative system aims to eliminate the risk of human error associated with manual handbrake operation, ensuring reliable engagement and disengagement without the need for electronic sensors or controls.
M.a.r.s mechanized air refilling system
Every section of an automobile is getting automated except one- Tires. To inflate a tire, the driver has to go
to a gas station or he has to attach a pump manually. Both these involve human labor. This project is
aimed at removing such unwanted strain and save time. The system has a dedicated unit for filling air
whenever required. A control unit which is a pic microcontroller is the brain of the system. When the
pressure level is below the threshold value chosen by the driver, the system displays it. The driver then may
choose to refill the air automatically. A compact pump does the job. Another problem in tires is a puncture.
A sudden puncture can cause the driver to lose control, culminating in an accident. The project’s minor
objective revolves around this. During a puncture the air pressure reduces suddenly. This reduction in
pressure over a time limit is identified as a puncture. It warns the driver of a puncture and saves life. The
other way of detecting a puncture is by calculating the ON time of the pump. If the pump is in ON state for
a long time and there is no improvement in the pressure level it is recognized as a puncture. It also saves a
lot of money by giving more longevity to the tire and better mileage. As the tire is filled with optimum air,
the friction between the tire and the road is maintained properly. Henceforth, the tire is not damaged much
and the fuel consumption is reduced. The project is destined to be a life and money saver.
M.A.R.S - Mechanized Air Refilling System
1. The document describes M.A.R.S (Mechanized Air Refilling System), a system that automatically refills tire pressure in vehicles. It aims to remove the need for manual labor in refilling tires and save time.
2. M.A.R.S consists of a control unit, pumping unit, and display unit. The control unit coordinates the system and monitors tire pressure. The pumping unit includes compact pumps attached to each tire to refill air. The display unit allows the driver to select pressure thresholds and view pressure levels.
3. The system can automatically refill tires when pressure is low and detect punctures by monitoring for sudden pressure drops over time. Maintaining optimal tire pressure
Automated hand Brake
The handbrake is an important part of an automobile which is known as latching brake It is mostly used while parking, thus also called as parking brake.
handbrake is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals.
In automobiles e-brakes usually consist of a cable directly connected to a brake mechanism on one end and to some type of mechanism that can be actuated by the driver on the other end.
the mechanisms is often a hand–operated lever, on the floor on either side of the driver.
a pull handle located below and near the steering wheel column, or a pedal.
Clutch of Motor Bike
This presentation gives complete information about the clutch of motor bike that how does it works. What components make a prefect clutch.
Paper on PLC
This document describes a systematic approach to developing a PLC program for automating a glass handling gantry system in the automobile industry. The system uses a gantry with rack and pinion drive to pick front glass from a conveyor and assemble it onto a vehicle body. Sensors including encoders, limit switches and a barcode reader provide position feedback to the PLC to control servo motors and achieve high positional accuracy. The document outlines the mechanical design, sensor integration, programming approach, and concludes the automation improves safety, productivity and reduces costs compared to manual assembly.
6.a combined pedal for brake and accelerator
This document describes the design of a combined brake and accelerator pedal for automobiles. Some car accidents are caused when the driver mistakenly presses the accelerator instead of the brake during emergencies. The design aims to reduce the time it takes to shift the foot between pedals by combining them into a single pedal. The single pedal is pivotally mounted and connected to both the brake and accelerator systems such that pressing the top activates acceleration and pressing the bottom engages the brakes. This allows braking and accelerating with one foot while preventing errors and interference between the two functions. The document outlines the working mechanism, advantages in reducing accidents, and aims to decrease the accident rate through this innovative pedal design.
IRJET- A Review on Safety Parking Brake Arrangement Actuated by Seatbelt
This document summarizes research on safety systems for vehicles that link the operation of the parking brake to the use of seatbelts. It discusses several previous studies that developed mechanisms to engage the parking brake if the driver is not wearing a seatbelt. The introduction provides background on the need to ensure driver safety through compulsory seatbelt use. It then describes the proposed system, which uses a pneumatic cylinder and circuit connected to the parking brake and sensors to check for seatbelt use and prevent vehicle movement if belts are not fastened. The document reviews 14 other related studies on topics like seatbelt safety systems, intelligent brake control systems, and optimizing seatbelt anchorage locations to minimize occupant injury. It concludes by describing the typical
AntilockBrakingSystem.pdf
The document discusses the Antilock Braking System (ABS). It begins by explaining that ABS prevents brakes from locking during braking by modulating brake pressure. It then describes the key subsystems of ABS, including wheel speed sensors, electronic control unit, and hydraulic pressure modulator. The document outlines the importance of ABS in improving vehicle stability, steerability, and reducing stopping distances. It concludes by stating that ABS helps drivers maintain control of their vehicle under hard braking conditions on slippery roads.
Advanced Brake Assistance System
In recent years the numbers of cars has been increasing. Due to which day by day
accidents are increasing more & more simultaneously. Unfortunately, many accidents caused by driving
on the opposite side of the road, inappropriate speed and insufficient distance from other vehicles and it
might have been prevented, if vehicle had been able to brake faster in emergency situation. The goal or
idea of the project is to develop the system to support the driver is emphasized in critical braking
situation. A probability based framework was developed and tested in emergency situation. As the
components were added to the algorithm, greater benefits were realized. The result indicates that time
taken to apply brake is less in emergency situation than the normal situation. Also taking the driver
reaction time in account we can assist the driver and avoid accident and hence improve the safety
parameters regarding to brakes. Thus the system reduces the number of car accidents mostly caused by
human errors .Also make brake assist available for commercial cars at lowest range
Similar to Consulting proposal.pptx (20)
IRJET- Automatic Pneumatic Bumper Shock Absorber and Breaking System
IRJET- Automatic Pneumatic Bumper Shock Absorber and Breaking System
IRJET- Individual Wheel Control and Hand Brake System
IRJET- Individual Wheel Control and Hand Brake System
Dissertation - Design of a Formula Student Race Car Spring, Damper and Anti-R...
Dissertation - Design of a Formula Student Race Car Spring, Damper and Anti-R...
automatic braking system and brake actuation before collison
automatic braking system and brake actuation before collison
IRJET- Modification and Implementation of Automatic Hand Brake System using S...
IRJET- Modification and Implementation of Automatic Hand Brake System using S...
Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System
Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System
IRJET- A Review on Safety Parking Brake Arrangement Actuated by Seatbelt
IRJET- A Review on Safety Parking Brake Arrangement Actuated by Seatbelt
Recently uploaded
欧洲杯投注-欧洲杯投注冠军赔率-欧洲杯投注夺冠赔率|【网址🎉ac55.net🎉】
【网址🎉ac55.net🎉】欧洲杯投注是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯投注。欧洲杯投注现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
退学办理【微信号:176555708】【退学办理(Curtin毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Descripción del cargador frontal VOLVO l180E
体育博彩-体育博彩赔率-体育博彩冠军赔率|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】体育博彩在体育博彩方面，不难发现，体育博彩多为英式运动提供投注。体育博彩为丰富多彩的体育项目提供投注，如足球、赛马、板球和飞镖，但这不是体育博彩的唯一优势。在体育博彩，全世界玩家都可以找到自己感兴趣的比赛进行投注。体育博彩为网球和美式运动如棒球、美式足球、篮球、冰球开出的投注同样值得关注。在夏季或冬季奥运会方面，体育博彩为玩家开出了丰富多彩的服务，是你的不二之选。你还可以投注水球、自行车和班迪球等小众体育项目，甚至可以为武术、拳击和综合格斗投注。体育博彩为众多体育项目开出滚球投注。
Kalyan chart DP boss guessing matka results
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定制【微信:bwp0011】《(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】欧洲杯竞猜是一家创立于1998年的在线的体育博彩公司。欧洲杯竞猜由库拉索岛政府授权，可以从事体育博彩相关活动。成立初期，欧洲杯竞猜专注于快速发展的国内市场，现在它为全世界的玩家和职业玩家提供投注服务。毫无疑问，欧洲杯竞猜是欧洲乃至全球最受欢迎的知名在线体育博彩公司。玩家的积极反馈、存款和提款的安全性都充分证明了该公司的可靠性。欧洲杯竞猜 Sports公司 以其良好的服务而得到了客户的认可。该公司在2004年获得了最高水平服务奖、2006年最佳博彩公司奖（EOG.com）、最佳博彩运营商前5名（The Online Wire）和著名门户网站“Gambling”颁发的最佳优惠和奖金奖项，这是对这家博彩公司的最为中肯的评价。
一比一原版悉尼大学毕业证(USYD毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(USYD毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Automotive Engine Valve Manufacturing Plant Project Report.pptx
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
定制(london学位证书)英国伦敦大学毕业证本科学历原版一模一样
原版定制【微信:bwp0011】《(london学位证书)英国伦敦大学毕业证本科学历》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
一比一原版(ucb毕业证书)白金汉大学毕业证如何办理
可看样本【微信号:BYZS866】《(ucb毕业证书)白金汉大学毕业证》【微信号:BYZS866】《毕业证、成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【关于学历材料质量】
我们承诺采用的是学校原版纸张（原版纸质、底色、纹路）我们工厂拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有成品以及工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
学校原版办理【微信号:176555708】【学校原版办理(RMIT毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯下注-欧洲杯下注下注app-欧洲杯下注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood touchscreen Bluetooth stereo head unit manual
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
不能毕业办理【微信号:176555708】【不能毕业办理(USQ毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
美洲杯买球-美洲杯买球在哪里押注-美洲杯买球在哪里投注|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】美洲杯买球是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。美洲杯买球平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，美洲杯买球对业界的影响力可见一斑。
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
咨询办理【(UniSA毕业证书)南澳大学毕业证】【176555708微信号】未毕业成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Consulting proposal.pptx
- 1. Confidential Customized for Lorem Ipsum LLC Version 1.0 M.kumarasamy College of engineering Department of mechanical engineering T eam member: 1)A.Thoufik ashamed 2)M.vembarasan 3)M.Yogesh Project guide Dr,M.loganathan
- 2. Confidential Customized for Lorem Ipsum LLC Version 1.0 Content: 1)Indroduction 2)Automatic hand brake release system diagram 3)Block diagram 4)working principle 5)Advantages 6)Disadvantages
- 3. V Ce or m tic pa oln & en Hto srizontalHandWheels. 4 1/2" &8" SheaveWheels. ChainJoiners&Clevis / Rivet. AAR BellCranks. ShockRetarders&ChainExtensions. Pins,Clevis &RodEyes.
- 4. Indroduction In cars, the parking brake, additionally known as emergency brake, hand brake, or e-brake, is a latching brake sometimes used to keep the vehicle stationary. It’s generally additionally accustomed prevent a vehicle from rolling once the operator desires each feet to work the clutch and throttle pedals. Automobile hand brakes sometimes contains a cable directly connected to the brake mechanism on one finish and to a lever or pedal at the driver's position. The mechanism is usually a non-automatic lever (hence the emergency brake name), on the ground on either aspect of the motive force, or a pull handle situated below and close to the wheel column, or a (foot-operated) pedal situated way with the exception of the opposite pedals. Although generally called a hand brake, using it in any emergency wherever the footbrake continues to be operational is probably going to badly upset the brake balance o the automotive and immensely increase the probability of loss of management of the vehicle, for instance by initiating a rear-wheel skid. To boot, the stopping force provided by using the handbrake is tiny and wouldn't considerably aid in stopping the vehicle. The hand brake operates totally on the rear wheels that have reduced traction whereas braking however in some cases, hand brake operates on front wheel, as wiped out most Citroens manufactured since the tip of World War II.The emergency brake is instead supposed to be used just in case of mechanical failure wherever the regular footbrake is inoperable or compromised. Trendy brake systems square measure usually terribly reliable and equipped with dual-circuit hydrauli
- 5. Automatic hand brake release system diagram
- 7. Working principle The compressed air from the compressor is used as a medium for this operation. Pneumatic double acting cylinder is used. The air from the compressor enters to the flow control valve. The other way of air enters to the solenoid valve. The function of Solenoid valve is to allow air at correct time interval. The air passes to outlet through the exhaust valve cylinder due to pressure difference in the compressor by means of pneumatic head into the piston by longitudinal unit used. The aim is to design and develop a control system based on intelligent electronically controlled automotive braking system is called automatic braking system. This braking system consists of limits switch, control unit and pneumatic braking system. The limits switch is place below the diver seat when ever driver gets up from the seat the limits switch will release and the signal is given to microcontroller and it will activate
- 8. A1)dQvuainctkaogepser ation 2)Accuracy is more 3)It's reduce tha manual effort
- 9. Disadvantages Cylinder stroke length is constant Need a separate compressor Maintenance of the equipment components such as hoses, valves has to done periodically.
- 10. Application It is applicable in four and heavy vehicle