Laptop configuration through dialup connection (telenor)gemini2050
The document provides step-by-step instructions for configuring a PC or laptop to connect to the internet via a GPRS connection through a GSM phone. It details setting the phone modem properties, adding an initialization command, creating a new dialup connection and selecting options to connect using the GSM phone with a Telenor number and access point name. Users are advised to check settings if unable to connect and provided tips to troubleshoot connection issues.
1. There are three basic methods for connecting a mobile phone to a PC: using an infrared port, USB or serial cable, or Bluetooth.
2. The document provides instructions for configuring PC settings and establishing a GPRS connection in Windows 98, 2000, XP by installing mobile device drivers, creating a new dial-up connection, and entering login credentials.
3. To use the Opera web browser on a mobile device, download Opera onto a PC or directly onto the mobile device, align infrared ports during installation, and Opera will be available once detection and setup are complete.
PLC Networking Basics using a Controllogix module also has an associated interactive youtube course that uses an intro project of networking multiple class laptops to a single Controllogix 5000 PLC/PAC. This powerpoint is for reference and additional information to supplement the course at http://www.youtube.com/watch?v=Au03psa9Vxk The PLC Networking Basics course has a total of 4 training modules (videos), each with it's own question at end, before directing you to next Controllogix tutorial. There is also an associated test for this training course at http://bin95.com/Employee-Training-Assessments/PLC-Training-Assessment/PLC-Networking-Basics-Controllogix.php
Hope you like and share, which will encourage us to create more of these free courses.
This document discusses how to set up and use H.323 compliant videoconferencing clients like ViewStation, NetMeeting, and GNOMEMeeting. It provides instructions on configuring ViewStation by setting the IP address and connecting components like the microphone. It also explains how to place calls between these clients by entering IP addresses and pressing call buttons. The goal is to allow users to videoconference between the different clients without considering compatibility issues, since they all support the H.323 international standard.
This document provides instructions for installing DIAG drivers and configuring a Moto G phone for use on the Reliance CDMA network. The steps include:
1. Installing the Motorola DIAG interface drivers through the Device Manager.
2. Configuring the phone's PRL, HDR, and MobileIP settings using the Motorola DFS software.
3. Unlocking the phone for use on Reliance CDMA by writing an NV dump file.
4. Resetting the phone to complete the configuration.
Rahul Sasi presented on fuzzing USB modems. He discussed fuzzing the SMS parsing modules in modem dialer applications to cause crashes or potential code execution. He found some non-exploitable bugs through his initial fuzzing and reported them to Huawei, but they did not respond adequately. He advocated further fuzzing of SMS formats like WAP push, operator logos and messages to find more issues. Reverse engineering the dialer applications and sniffing USB traffic could aid in developing better fuzzing techniques and payloads.
The document provides instructions for registering a Grandstream BT-200 phone with a PBXware server using either manual configuration, auto-provisioning, or auto-configuration. It outlines the requirements and steps to configure the UAD settings and create an extension on the PBXware server. The instructions also describe how to configure the Grandstream phone by accessing its web interface and setting the TFTP server. Once completed, the phone should successfully register with the PBXware system and be ready for use.
Laptop configuration through dialup connection (telenor)gemini2050
The document provides step-by-step instructions for configuring a PC or laptop to connect to the internet via a GPRS connection through a GSM phone. It details setting the phone modem properties, adding an initialization command, creating a new dialup connection and selecting options to connect using the GSM phone with a Telenor number and access point name. Users are advised to check settings if unable to connect and provided tips to troubleshoot connection issues.
1. There are three basic methods for connecting a mobile phone to a PC: using an infrared port, USB or serial cable, or Bluetooth.
2. The document provides instructions for configuring PC settings and establishing a GPRS connection in Windows 98, 2000, XP by installing mobile device drivers, creating a new dial-up connection, and entering login credentials.
3. To use the Opera web browser on a mobile device, download Opera onto a PC or directly onto the mobile device, align infrared ports during installation, and Opera will be available once detection and setup are complete.
PLC Networking Basics using a Controllogix module also has an associated interactive youtube course that uses an intro project of networking multiple class laptops to a single Controllogix 5000 PLC/PAC. This powerpoint is for reference and additional information to supplement the course at http://www.youtube.com/watch?v=Au03psa9Vxk The PLC Networking Basics course has a total of 4 training modules (videos), each with it's own question at end, before directing you to next Controllogix tutorial. There is also an associated test for this training course at http://bin95.com/Employee-Training-Assessments/PLC-Training-Assessment/PLC-Networking-Basics-Controllogix.php
Hope you like and share, which will encourage us to create more of these free courses.
This document discusses how to set up and use H.323 compliant videoconferencing clients like ViewStation, NetMeeting, and GNOMEMeeting. It provides instructions on configuring ViewStation by setting the IP address and connecting components like the microphone. It also explains how to place calls between these clients by entering IP addresses and pressing call buttons. The goal is to allow users to videoconference between the different clients without considering compatibility issues, since they all support the H.323 international standard.
This document provides instructions for installing DIAG drivers and configuring a Moto G phone for use on the Reliance CDMA network. The steps include:
1. Installing the Motorola DIAG interface drivers through the Device Manager.
2. Configuring the phone's PRL, HDR, and MobileIP settings using the Motorola DFS software.
3. Unlocking the phone for use on Reliance CDMA by writing an NV dump file.
4. Resetting the phone to complete the configuration.
Rahul Sasi presented on fuzzing USB modems. He discussed fuzzing the SMS parsing modules in modem dialer applications to cause crashes or potential code execution. He found some non-exploitable bugs through his initial fuzzing and reported them to Huawei, but they did not respond adequately. He advocated further fuzzing of SMS formats like WAP push, operator logos and messages to find more issues. Reverse engineering the dialer applications and sniffing USB traffic could aid in developing better fuzzing techniques and payloads.
The document provides instructions for registering a Grandstream BT-200 phone with a PBXware server using either manual configuration, auto-provisioning, or auto-configuration. It outlines the requirements and steps to configure the UAD settings and create an extension on the PBXware server. The instructions also describe how to configure the Grandstream phone by accessing its web interface and setting the TFTP server. Once completed, the phone should successfully register with the PBXware system and be ready for use.
This document provides instructions for configuring a MikroTik router to share a single internet connection among multiple local computers using network address translation (NAT). It describes how to configure the WAN and LAN interfaces, set up DHCP and DNS servers, enable NAT and firewall rules to masquerade the LAN IP addresses, and limit bandwidth to 10kbps per device on the LAN. The configuration shares an internet connection from a WAN IP to a LAN with IP range 192.168.0.0/24 while restricting bandwidth using queue types and simple queues.
This document provides instructions for connecting various devices to the wireless network and printers at [Company Name]. It includes:
- Directions for connecting computers, smartphones and tablets to the GMC_Wireless network and avoiding quarantine, which requires submitting MAC/IP addresses.
- Steps for finding MAC addresses on PCs and IP addresses on Apple devices.
- Procedures for connecting personal computers to the printer in the Faculty Lounge, including installing drivers and setting the printer name and default settings.
- Information on using Crestron AirMedia and other projection methods like VGA, HDMI and thumb drives in classrooms.
- Contact details for the IT staff for technical support.
INFA 620
Lab 4: Firewall
Introduction
You are the Network Security Administrator for an organization. You are responsible for the configuration of a firewall that segregates the enterprise network from the external network. You will strategically allow authorized incoming and outgoing traffic while denying all unauthorized traffic.
In this lab, we going to practice setting up a Smoothwall firewall in a UMUC remote lab. Smothwall is a Linux kernel-based firewall. It has a rich graphics interface and it implements the firewall using UNIX/Linux iptables. (See http://linux.die.net/man/8/iptables). The manual for the Smoothwall firewall can be found at: http://www.smoothwall.com/media/114580/AdvancedFirewall-admin.pdf. The exercise does not require you to read the entire manual. We are going to experiment with inbound and outbound traffic filtering aspects (Chapter 7) of the firewall.
The UMUC remote environment for this lab is shown in the figure below. Notice the firewall/router separates the100.100.0.X External network (virtual Internet) from the 198.168.1.x Enterprise machines. This firewall will be controlling the in- and out-bound traffic of the enterprise.
Designed and written by Jeffrey Karlan Page 10 of 24
INFA 620 Firewall Lab ManualCopyright UMUC 2016Page 8 of 36
INFA 620 Firewall Lab Manual
Copyright UMUC 2016
Page 12 of 23
Step by Step Instructions for Performing the Lab Activity
1) From the Virtual Machine screen, double click the console for Enterprise. Use root/aspring2013 credentials to logon to Enterprise. (Note: From the Jumpbox you can also remote to Enterprise. Double click VNC Viewer. Enter remote host address 10.5.14.110 > Click Connect and use aspring2013 as the password. But the console login gives you more “real estate,” and should be preferred.)
2) This is Enterprise (Centos)
3) Double click Firewall GUI
4) Supply Username and Password and Click OK
5) This is Firewall (Smoothwall)
6) Click Networking > Outgoing. This is where you will configure rules to allow or deny network traffic from our internal Enterprise network to the External Virtual Internet.
7) Notice the Interface Defaults section the current selection is “Blocked with Exceptions”. This means that all traffic from Enterprise network to External network that is not explicitly allowed is implicitly denied. This method of administering a firewall is known as maintaining a “Whitelist”. If we were to implicitly allow all network traffic except for explicitly denied protocols it is known as maintaining a “Blacklist”. In network administration maintaining a whitelist is considered best practice.
Our Firewall has an interface on the Enterprise Internal network known as the Green Interface, and an interface on the External network known as the Red interface.
8) Minimize Smoothwall and return to Enterprise desktop
9) Double click Scripts > Double click Traffic.
10) Each of the scripts in this folder will simulate 5 packets of tra.
To configure PPPOE on an HG531 modem/router:
1. Connect to the modem/router via Ethernet or WiFi and access its admin page by typing 192.168.1.1 into a web browser.
2. Log in using the username and password printed on the device.
3. Click "Basic" then "WAN" and enter the PPPOE username and password provided by the ISP.
4. To set the WiFi name and password, click "WLAN", enter the SSID and password, and submit the changes. Additional SSIDs can also be configured.
Mikro tik vpn configuration with site convertedUttam Ds
This document discusses how to configure a site-to-site VPN tunnel between two MikroTik routers using PPTP. It involves configuring one router as a PPTP server and the other as a PPTP client. On the server router, the configuration includes enabling the PPTP server, creating a PPTP user, and adding routes. On the client router, the configuration includes creating a PPTP client connection and adding a static route to reach the private network behind the server router. When completed, private networks behind each router can communicate securely over the PPTP tunnel.
The document provides instructions for configuring a system for remote access in 5 steps: 1) Check the system settings and network connections, 2) Configure the network IP and settings, 3) Create user accounts, 4) Enable remote desktop connections, and 5) Change remote security settings. Finally, the software is installed and patched on the server to allow multi-user access from client systems remotely. Proper IP addressing and matching user accounts are required to successfully connect from client to server.
This document provides instructions for setting up secure remote desktop access to a Windows computer using CopSSH and SSH tunneling. The key steps are:
1. Install CopSSH on the remote Windows computer to enable an SSH server.
2. Generate an SSH key pair using PuttyGen and save the public key on the remote computer.
3. Configure CopSSH to use a non-standard port and require SSH key authentication only.
4. Set up Putty on the local client computer to connect via SSH tunneling to the remote computer, forwarding the RDP port.
The document provides technical specifications and instructions for configuring and using the WIFI327 device to access vehicle diagnostic data via WiFi. Key details include:
- The WIFI327 supports various vehicle communication protocols and provides WiFi access to diagnostic data such as engine parameters, DTC codes, and fuel consumption.
- Configuration involves setting the WIFI327 IP address to 192.168.0.10 and connecting a computer or mobile device to its WiFi network to access provided software.
- Available software allows viewing live data, trouble codes, and more, with both commercial and free options for computers and iOS devices.
Autoconfig tool User Manual : A script to auto configure malware affected mod...Pratheesh S Kumar
This document proposes an automated solution to configure modems called AutoConfig. It summarizes the problem of manual modem configuration taking a long time. The solution is to use a script called AutoConfig.ast with the Autotelnet tool to automatically configure modems like ibaton and syrma modems in under a minute. It provides step-by-step instructions on downloading the required files and using the automated configuration process.
1. IPSec provides automated authentication, integrity, and confidentiality for IP packets by adding security headers between the IP and transport headers.
2. IPSec policies can be configured through the IP Security Policy Management console to encrypt, authenticate, or block traffic based on IP filters and actions.
3. For example, a policy can be created to encrypt all traffic from system 23 to system 100 by defining an IP filter for source 23, destination 100, and any port, and associating it with an "encrypt" action and preshared authentication key of "bosco".
1) The document provides instructions for setting up a modem router by connecting it to a computer, wall jack, and other network devices.
2) It describes powering on the devices and checking that the LED lights display properly on the router. If not, the connections should be checked.
3) The setup can be done by running a setup CD or accessing the router's web interface. The document then outlines the steps to configure the router's internet, wireless, and other settings.
This document provides installation instructions for a TP-LINK Wireless N Access Point model TL-WA701ND. It includes the following steps: 1) Connect the Access Point to a computer or wireless network using an Ethernet cable or wirelessly; 2) Log into the Access Point's web interface using the default username and password; 3) Select an operation mode such as Access Point, Repeater, or Client mode; 4) Configure wireless and network settings; 5) Reboot the Access Point to apply the new configuration. Troubleshooting tips are provided at the end to restore default settings or access the web interface.
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
This document provides instructions for controlling a laptop using a smartphone by creating a WiFi hotspot on the laptop and then connecting to it from the smartphone. It describes using either TeamViewer or Microsoft Remote Desktop Client software to remotely access and control the laptop interface from the smartphone once they are connected to the same WiFi network via the laptop hotspot. The steps include enabling hotspot mode on the laptop, downloading and installing the correct remote access software on both devices, and then entering credentials to remotely control the laptop screen from the smartphone.
This document provides information on communication solutions from Drishti, NEC, and Grandstream. It summarizes their product offerings, including Drishti's unified contact center software, NEC's ISDN PBX systems, and Grandstream's IP phones, gateways, and IP PBX solutions. Contact information is provided for COH Technologies, which represents these brands and can provide further details on their solutions for inbound, outbound, blended, and TDM/IP communication needs.
The document provides instructions for connecting to a Cisco device's console port from Linux using Minicom. It describes obtaining the necessary hardware, installing Minicom, finding the serial port name, configuring Minicom with the correct serial port and settings, and creating a desktop launcher for easy access to Minicom and the Cisco console.
This document provides instructions for configuring port forwarding on a SonicWALL firewall to allow external access to internal FTP, SMTP, and DNS servers located on the local network. It explains how to create access rules and NAT policies to forward specific ports to the internal servers using both the Standard and Enhanced firmware. Verification steps are included to check that the port forwarding configurations are working properly.
obd2works, as a professional auto diagnostic tools online supplier, providing our customers with a vast range of high-quality and affordable automobile maintenance tools .Our main business line covers: Automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; Auto Diagnostic tool, OBD2 Code Scanners, ECU Chip Tuning Tool, Car Key programmer Mileage Programmer as well as other more featured products.
In our shop you could get universal and economical tools and free technical support for your car. Our promise is high-quality, high-efficiency, credibility and the principle of reciprocity, which aims to establish a long-term economic trade relation with the vast number of clients.
http://www.obd2works.com
This document provides instructions for setting up security on a D-Link wireless router through its detailed settings. It recommends disabling the SSID broadcast, setting up WPA encryption with a passphrase, restricting the number of clients, setting an administrator password, and using MAC address filtering to restrict access. The setup process includes downloading any firmware upgrades, configuring wireless security options, and listing the MAC addresses of allowed devices.
This document provides instructions for configuring a MikroTik router to share a single internet connection among multiple local computers using network address translation (NAT). It describes how to configure the WAN and LAN interfaces, set up DHCP and DNS servers, enable NAT and firewall rules to masquerade the LAN IP addresses, and limit bandwidth to 10kbps per device on the LAN. The configuration shares an internet connection from a WAN IP to a LAN with IP range 192.168.0.0/24 while restricting bandwidth using queue types and simple queues.
This document provides instructions for connecting various devices to the wireless network and printers at [Company Name]. It includes:
- Directions for connecting computers, smartphones and tablets to the GMC_Wireless network and avoiding quarantine, which requires submitting MAC/IP addresses.
- Steps for finding MAC addresses on PCs and IP addresses on Apple devices.
- Procedures for connecting personal computers to the printer in the Faculty Lounge, including installing drivers and setting the printer name and default settings.
- Information on using Crestron AirMedia and other projection methods like VGA, HDMI and thumb drives in classrooms.
- Contact details for the IT staff for technical support.
INFA 620
Lab 4: Firewall
Introduction
You are the Network Security Administrator for an organization. You are responsible for the configuration of a firewall that segregates the enterprise network from the external network. You will strategically allow authorized incoming and outgoing traffic while denying all unauthorized traffic.
In this lab, we going to practice setting up a Smoothwall firewall in a UMUC remote lab. Smothwall is a Linux kernel-based firewall. It has a rich graphics interface and it implements the firewall using UNIX/Linux iptables. (See http://linux.die.net/man/8/iptables). The manual for the Smoothwall firewall can be found at: http://www.smoothwall.com/media/114580/AdvancedFirewall-admin.pdf. The exercise does not require you to read the entire manual. We are going to experiment with inbound and outbound traffic filtering aspects (Chapter 7) of the firewall.
The UMUC remote environment for this lab is shown in the figure below. Notice the firewall/router separates the100.100.0.X External network (virtual Internet) from the 198.168.1.x Enterprise machines. This firewall will be controlling the in- and out-bound traffic of the enterprise.
Designed and written by Jeffrey Karlan Page 10 of 24
INFA 620 Firewall Lab ManualCopyright UMUC 2016Page 8 of 36
INFA 620 Firewall Lab Manual
Copyright UMUC 2016
Page 12 of 23
Step by Step Instructions for Performing the Lab Activity
1) From the Virtual Machine screen, double click the console for Enterprise. Use root/aspring2013 credentials to logon to Enterprise. (Note: From the Jumpbox you can also remote to Enterprise. Double click VNC Viewer. Enter remote host address 10.5.14.110 > Click Connect and use aspring2013 as the password. But the console login gives you more “real estate,” and should be preferred.)
2) This is Enterprise (Centos)
3) Double click Firewall GUI
4) Supply Username and Password and Click OK
5) This is Firewall (Smoothwall)
6) Click Networking > Outgoing. This is where you will configure rules to allow or deny network traffic from our internal Enterprise network to the External Virtual Internet.
7) Notice the Interface Defaults section the current selection is “Blocked with Exceptions”. This means that all traffic from Enterprise network to External network that is not explicitly allowed is implicitly denied. This method of administering a firewall is known as maintaining a “Whitelist”. If we were to implicitly allow all network traffic except for explicitly denied protocols it is known as maintaining a “Blacklist”. In network administration maintaining a whitelist is considered best practice.
Our Firewall has an interface on the Enterprise Internal network known as the Green Interface, and an interface on the External network known as the Red interface.
8) Minimize Smoothwall and return to Enterprise desktop
9) Double click Scripts > Double click Traffic.
10) Each of the scripts in this folder will simulate 5 packets of tra.
To configure PPPOE on an HG531 modem/router:
1. Connect to the modem/router via Ethernet or WiFi and access its admin page by typing 192.168.1.1 into a web browser.
2. Log in using the username and password printed on the device.
3. Click "Basic" then "WAN" and enter the PPPOE username and password provided by the ISP.
4. To set the WiFi name and password, click "WLAN", enter the SSID and password, and submit the changes. Additional SSIDs can also be configured.
Mikro tik vpn configuration with site convertedUttam Ds
This document discusses how to configure a site-to-site VPN tunnel between two MikroTik routers using PPTP. It involves configuring one router as a PPTP server and the other as a PPTP client. On the server router, the configuration includes enabling the PPTP server, creating a PPTP user, and adding routes. On the client router, the configuration includes creating a PPTP client connection and adding a static route to reach the private network behind the server router. When completed, private networks behind each router can communicate securely over the PPTP tunnel.
The document provides instructions for configuring a system for remote access in 5 steps: 1) Check the system settings and network connections, 2) Configure the network IP and settings, 3) Create user accounts, 4) Enable remote desktop connections, and 5) Change remote security settings. Finally, the software is installed and patched on the server to allow multi-user access from client systems remotely. Proper IP addressing and matching user accounts are required to successfully connect from client to server.
This document provides instructions for setting up secure remote desktop access to a Windows computer using CopSSH and SSH tunneling. The key steps are:
1. Install CopSSH on the remote Windows computer to enable an SSH server.
2. Generate an SSH key pair using PuttyGen and save the public key on the remote computer.
3. Configure CopSSH to use a non-standard port and require SSH key authentication only.
4. Set up Putty on the local client computer to connect via SSH tunneling to the remote computer, forwarding the RDP port.
The document provides technical specifications and instructions for configuring and using the WIFI327 device to access vehicle diagnostic data via WiFi. Key details include:
- The WIFI327 supports various vehicle communication protocols and provides WiFi access to diagnostic data such as engine parameters, DTC codes, and fuel consumption.
- Configuration involves setting the WIFI327 IP address to 192.168.0.10 and connecting a computer or mobile device to its WiFi network to access provided software.
- Available software allows viewing live data, trouble codes, and more, with both commercial and free options for computers and iOS devices.
Autoconfig tool User Manual : A script to auto configure malware affected mod...Pratheesh S Kumar
This document proposes an automated solution to configure modems called AutoConfig. It summarizes the problem of manual modem configuration taking a long time. The solution is to use a script called AutoConfig.ast with the Autotelnet tool to automatically configure modems like ibaton and syrma modems in under a minute. It provides step-by-step instructions on downloading the required files and using the automated configuration process.
1. IPSec provides automated authentication, integrity, and confidentiality for IP packets by adding security headers between the IP and transport headers.
2. IPSec policies can be configured through the IP Security Policy Management console to encrypt, authenticate, or block traffic based on IP filters and actions.
3. For example, a policy can be created to encrypt all traffic from system 23 to system 100 by defining an IP filter for source 23, destination 100, and any port, and associating it with an "encrypt" action and preshared authentication key of "bosco".
1) The document provides instructions for setting up a modem router by connecting it to a computer, wall jack, and other network devices.
2) It describes powering on the devices and checking that the LED lights display properly on the router. If not, the connections should be checked.
3) The setup can be done by running a setup CD or accessing the router's web interface. The document then outlines the steps to configure the router's internet, wireless, and other settings.
This document provides installation instructions for a TP-LINK Wireless N Access Point model TL-WA701ND. It includes the following steps: 1) Connect the Access Point to a computer or wireless network using an Ethernet cable or wirelessly; 2) Log into the Access Point's web interface using the default username and password; 3) Select an operation mode such as Access Point, Repeater, or Client mode; 4) Configure wireless and network settings; 5) Reboot the Access Point to apply the new configuration. Troubleshooting tips are provided at the end to restore default settings or access the web interface.
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
This document provides instructions for controlling a laptop using a smartphone by creating a WiFi hotspot on the laptop and then connecting to it from the smartphone. It describes using either TeamViewer or Microsoft Remote Desktop Client software to remotely access and control the laptop interface from the smartphone once they are connected to the same WiFi network via the laptop hotspot. The steps include enabling hotspot mode on the laptop, downloading and installing the correct remote access software on both devices, and then entering credentials to remotely control the laptop screen from the smartphone.
This document provides information on communication solutions from Drishti, NEC, and Grandstream. It summarizes their product offerings, including Drishti's unified contact center software, NEC's ISDN PBX systems, and Grandstream's IP phones, gateways, and IP PBX solutions. Contact information is provided for COH Technologies, which represents these brands and can provide further details on their solutions for inbound, outbound, blended, and TDM/IP communication needs.
The document provides instructions for connecting to a Cisco device's console port from Linux using Minicom. It describes obtaining the necessary hardware, installing Minicom, finding the serial port name, configuring Minicom with the correct serial port and settings, and creating a desktop launcher for easy access to Minicom and the Cisco console.
This document provides instructions for configuring port forwarding on a SonicWALL firewall to allow external access to internal FTP, SMTP, and DNS servers located on the local network. It explains how to create access rules and NAT policies to forward specific ports to the internal servers using both the Standard and Enhanced firmware. Verification steps are included to check that the port forwarding configurations are working properly.
obd2works, as a professional auto diagnostic tools online supplier, providing our customers with a vast range of high-quality and affordable automobile maintenance tools .Our main business line covers: Automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; Auto Diagnostic tool, OBD2 Code Scanners, ECU Chip Tuning Tool, Car Key programmer Mileage Programmer as well as other more featured products.
In our shop you could get universal and economical tools and free technical support for your car. Our promise is high-quality, high-efficiency, credibility and the principle of reciprocity, which aims to establish a long-term economic trade relation with the vast number of clients.
http://www.obd2works.com
This document provides instructions for setting up security on a D-Link wireless router through its detailed settings. It recommends disabling the SSID broadcast, setting up WPA encryption with a passphrase, restricting the number of clients, setting an administrator password, and using MAC address filtering to restrict access. The setup process includes downloading any firmware upgrades, configuring wireless security options, and listing the MAC addresses of allowed devices.
Similar to Bsnl/Teracom and Nokia Simons Modem Configration (20)
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
4. Then Click on Configration Then click Internet connection
Hari Pratap Goud(www.htechsoftsolution.com)
5. Then Click On Add. Then VPI:1 VCI :32 Then Click on Next
Hari Pratap Goud(www.htechsoftsolution.com)
6. Then Select PPPoE Then Next
Hari Pratap Goud(www.htechsoftsolution.com)
7. Then Provide user Name and Pass
User Name : 0119999999_dsl@airtelbroadband.in
Password : ***********
Hari Pratap Goud(www.htechsoftsolution.com)
8. Then Click On Next
Hari Pratap Goud(www.htechsoftsolution.com)
9. Then Click On Apply
Hari Pratap Goud(www.htechsoftsolution.com)
10. Again Click On Configration Then Wirless Network Then SSID Wireless
Name
Hari Pratap Goud(www.htechsoftsolution.com)
11. Then Select on Security Setting and Pre Shared Key wifi Pass. Then Click On
Confirm
Hari Pratap Goud(www.htechsoftsolution.com)
12. Then Click On Admin Then Reboot
Hari Pratap Goud(www.htechsoftsolution.com)
13. Thank you..!!!
For More Information and Guidelines Can Visit To The Given
Website.
Website: www.htechsoftsolution.com
Linked in: https:/www.linkedin.com/in/hari-pratap-a423bbab/