Pushing traditional manufacturers towards agile hardware manufacturing with D...Product of Things
These are the slides from Dan Comyns's workshop at Product of Things Conference in Tel Aviv on July 2018:
Who this workshop is for:
This workshop is for software product managers who find themselves in need to develop hardware components and wish to follow agile methodologies in the process of hardware manufacturing
After this workshop you will be able to:
- Define a work process that enables software companies to move at the same pace while working with hardware manufacturers
- To push hardware manufacturers to be ‘problem solvers’ and to work against product requirement rather than specs
- Start working with Chinese manufacturers
What is covered:
- How to deal with Chinese manufacturers and counterparties
- Lessons learned from working with various hardware manufacturers simultaneously
- ‘Tips and tricks’ on how to implement modern agile software development processes to traditional waterfall managed hardware companies
In this workshop, Dan will share his first-hand experience on the successful implementation of agile software development processes in traditional Chinese hardware manufacturers.
Mat Clayton, Co-founder & CTO, Mixcloud - Using technology decisions to move...How to Web
Mixcloud at its core is a startup built on fast product iteration, we'll take a look at how technology and product decisions have helped enabled rapid releases across multiple platforms. We will investigate the key technologies deployed and how they have evolved as we have grown from 0 to over 10 Million active users.
More details on: http://2013.howtoweb.co/
Pushing traditional manufacturers towards agile hardware manufacturing with D...Product of Things
These are the slides from Dan Comyns's workshop at Product of Things Conference in Tel Aviv on July 2018:
Who this workshop is for:
This workshop is for software product managers who find themselves in need to develop hardware components and wish to follow agile methodologies in the process of hardware manufacturing
After this workshop you will be able to:
- Define a work process that enables software companies to move at the same pace while working with hardware manufacturers
- To push hardware manufacturers to be ‘problem solvers’ and to work against product requirement rather than specs
- Start working with Chinese manufacturers
What is covered:
- How to deal with Chinese manufacturers and counterparties
- Lessons learned from working with various hardware manufacturers simultaneously
- ‘Tips and tricks’ on how to implement modern agile software development processes to traditional waterfall managed hardware companies
In this workshop, Dan will share his first-hand experience on the successful implementation of agile software development processes in traditional Chinese hardware manufacturers.
Mat Clayton, Co-founder & CTO, Mixcloud - Using technology decisions to move...How to Web
Mixcloud at its core is a startup built on fast product iteration, we'll take a look at how technology and product decisions have helped enabled rapid releases across multiple platforms. We will investigate the key technologies deployed and how they have evolved as we have grown from 0 to over 10 Million active users.
More details on: http://2013.howtoweb.co/
It's Gotta be Easier... Simplifying the Theme Building Process- WordCamp Bost...SchechterDesign
Presented by Al Caldarone & Stephanie Schechter • Project Management/Freelance Track
Ok, so you’ve found the perfect career as a freelancer, building WordPress themes. It’s creative, exciting, and could make you some serious money while offering you the flexibility to be your own boss. It also can be frustrating, overwhelming, and has a learning curve that never goes away.
Developers and Designers have their own passions and skill sets but then they go on their own and after a couple of projects full of self-inflicted frustration they soon realize there must be an easier way and it may be time to collaborate. Collaboration between designers and developers is not only a great way to relieve some of the burden, but also helps to improve creativity, enhance quality, and increase productivity by combining different perspectives.
This presentation will help you reach your goals of quickly building more innovative WordPress sites by discussing collaboration as well as other time saving techniques that can help in your development process.
This is the deck i've made for the sharing session at Kejora (Ideabox accelerator program). 14 November 2014.
Contains tips of how to think and plan the Minimum Viable Product. I use the design method from Google Ventures, Design Sprint.
Mobile Product Strategy Keynote Presentation for Mobile App Europe Conference...Marc C. Lange
This keynote presentation is all about validating your user's needs as early as possible in the product management process. You will gain experience in the basics of Customer Development, smart user interviews and how these methods apply to Mobile. Basic concepts, best practices and tools sum up this talk.
Whether you want to teach a new concept or just provide updates, screencasting can be a powerful tool for both teachers and administrators. In this session, you will learn about the different types of free screencasting tools that are available, as well as how to use them. You will also learn how students can create their own screencasts on a variety of devices, including Chromebooks.
Game-Changers 911: How to Change the Project Mgt. Game in 2020Aggregage
Businesses everywhere are trying to “get business agile”—but it’s not easy to adapt to becoming this adaptive. How can conventional organizations succeed in this transformation? In this webinar, Peter Taylor will walk through the change process step by step, and look at a tried and tested transformation roadmap: benefits are outlined, solutions to common challenges offered, and tried and tested methods and tools provided. It will be a guide towards a decentralized and management style that offers more successful decision making through collaboration.
This presentation is part of a Citrix Labs workshop introducing the concepts of rapid prototyping for developers. It focuses on the creation of early samples, models, or releases of a product built to test a concept or process or to act as a thing to be replicated or learned from.
Rapid Product Development | Rapid Prototyping
Overview
Concept
Goals of Rapid Product Development
Virtual Prototyping and Testing Technology
Physical Prototyping and Rapid Manufacturing Technologies
Synergic Integration Technologies
Advantages of Rapid Product Development
Disadvantages of Rapid Product Development
References
It's Gotta be Easier... Simplifying the Theme Building Process- WordCamp Bost...SchechterDesign
Presented by Al Caldarone & Stephanie Schechter • Project Management/Freelance Track
Ok, so you’ve found the perfect career as a freelancer, building WordPress themes. It’s creative, exciting, and could make you some serious money while offering you the flexibility to be your own boss. It also can be frustrating, overwhelming, and has a learning curve that never goes away.
Developers and Designers have their own passions and skill sets but then they go on their own and after a couple of projects full of self-inflicted frustration they soon realize there must be an easier way and it may be time to collaborate. Collaboration between designers and developers is not only a great way to relieve some of the burden, but also helps to improve creativity, enhance quality, and increase productivity by combining different perspectives.
This presentation will help you reach your goals of quickly building more innovative WordPress sites by discussing collaboration as well as other time saving techniques that can help in your development process.
This is the deck i've made for the sharing session at Kejora (Ideabox accelerator program). 14 November 2014.
Contains tips of how to think and plan the Minimum Viable Product. I use the design method from Google Ventures, Design Sprint.
Mobile Product Strategy Keynote Presentation for Mobile App Europe Conference...Marc C. Lange
This keynote presentation is all about validating your user's needs as early as possible in the product management process. You will gain experience in the basics of Customer Development, smart user interviews and how these methods apply to Mobile. Basic concepts, best practices and tools sum up this talk.
Whether you want to teach a new concept or just provide updates, screencasting can be a powerful tool for both teachers and administrators. In this session, you will learn about the different types of free screencasting tools that are available, as well as how to use them. You will also learn how students can create their own screencasts on a variety of devices, including Chromebooks.
Game-Changers 911: How to Change the Project Mgt. Game in 2020Aggregage
Businesses everywhere are trying to “get business agile”—but it’s not easy to adapt to becoming this adaptive. How can conventional organizations succeed in this transformation? In this webinar, Peter Taylor will walk through the change process step by step, and look at a tried and tested transformation roadmap: benefits are outlined, solutions to common challenges offered, and tried and tested methods and tools provided. It will be a guide towards a decentralized and management style that offers more successful decision making through collaboration.
This presentation is part of a Citrix Labs workshop introducing the concepts of rapid prototyping for developers. It focuses on the creation of early samples, models, or releases of a product built to test a concept or process or to act as a thing to be replicated or learned from.
Rapid Product Development | Rapid Prototyping
Overview
Concept
Goals of Rapid Product Development
Virtual Prototyping and Testing Technology
Physical Prototyping and Rapid Manufacturing Technologies
Synergic Integration Technologies
Advantages of Rapid Product Development
Disadvantages of Rapid Product Development
References
Additive manufacturing, aka 3D printing, is the process of producing 3-dimensional objects from a computer file, where the part is built by adding material layer-by-layer.
Today, more companies in a variety of industries are embracing the 3D printing process as it presents many significant advantages over the more traditional manufacturing methods of subtractive manufacturing and injection molding.
As a CAD manager you are responsible for implementing new software tools and motivating users, but how do you do that when you have to train, implement standards, and deal with everything else? By establishing a CAD proving ground, you can treat your super users like test pilots and build a strong software development environment that benefits your users and your company. The proving-ground concept starts identifying new tools and customization through testing, training, standardization, constant improvement, and broad user adoption. In this class we will challenge you to think about software implementation in a totally different way than you have in the past, but the change will be worth it when you build a powerful proving ground. If you have to develop and/or deploy new software tools, you can’t afford to miss this class.
Purpose
Prototyping
Types
Importance
Prototyping Principles
When to Use Prototyping
Technologies
Planning Milestones for Prototyping
The Importance of Testing in Prototyping
Conclusion
References
Lean Design Research - Why There’s No Excuse Wasting Money on Bad Products A...Dialexa
In the age of the consumer and consumerism of IT, there’s no question that design thinking is critical to new product success. The importance of design thinking has become so clear that there has been a surge in demand for design at the executive table.
http://by.dialexa.com/lean-design-research-no-excuse-wasting-money-on-bad-products
2014-2015 new release about AutoCAD. Ph +91 99153-37448 for AutoCAD movie editing and more training in autocad like mechanical , electrical and autocad max.
Agile and data driven product development oleh Dhiku VP Product KMK OnlineRein Mahatma
Di webinar ini Dhiku akan membawakan materi seputar tips product management, bagaimana proses membangun product digital dengan agile dan data driven. Dimulai dari memahami kebutuhan user, melakukan usability testing, menganalisa data, melakukan prioritas fitur dan perencanaan product roadmap, incremental deployment ke user, sampai evaluasi data untuk pengembangan product yang lebih baik.
Oleh http://www.startupbisnis.com dan http://www.codepolitan.com
Similar to Conceptual Machine Design | BP Automation (20)
Vape Horizon is a trusted source of e-juice, e-cigarettes, and vape accessories in Edmonton and across Canada. We are determined to provide premium quality electronic cigarettes, e-liquids, vape mods, atomizers, and a complete range of vape accessories at affordable price.
BP Automation is a reputable automation engineering company in Canada where we solve complex manufacturing problems and develop economically viable machines and control systems for companies of varying sizes. Feel free to discuss your project with us!
The problem is there are no simple “right” answers for most Web design questions (at least not for the important ones). What works is good, integrated design that fills a need—carefully thought out, well executed, and tested.
– Steve Krug
Visit our website www.reachfirst.com for more info.
The use of FRP materials such as GFRP fiberglass rebar can resolve longstanding deterioration problems that are associated with conventional steel reinforcement materials. The key advantage of FRP, when compared with traditional materials, is their ability to extend the service life of a concrete structure and provide a solid resistance against severe environmental conditions such as corrosive agents, aging, and degradation.
for more detail info visit our website www.tuf-bar.com
Simply put, CNC machines are programmed and controlled to carry out the following actions:
Positioning a tool in different axes
Motion-relative velocity of tool with respect to work piece
Switching function, for example, direction of rotation of spindle,
CNC systems use motor drives to control both the position and the velocity of the machine axes.
The open-loop system and the closed-loop system are two ways to activate the servo drivers.
Follow us on https://www.bpautomation.com/
In this slide we explore the top web design principles that will make your website aesthetically pleasing, easy to use, engaging, and effective.
www.reachfirst.com
Industrial robots can perform boring, stressful, extensive, and
repetitive task in very effective manner. Welding robots or
automated welding help manufacturers make their welding
operations more efficient and accurate.
Gfrp Fiberglass Rebar a Material for the FutureSteven Tyler
The key advantage of fiberglass rebar, when compared with traditional materials, is their ability to provide a solid resistance against severe environmental conditions.
For more detail visit our website : www.tuf-bar.com
Load bank solutions are designed to help businesses and individuals test, commission, and maintain their critical power generation systems.
For more details visit our website:
https://www.powersystemsplus.com/
Safety signs are communication channels used to highlight and provide information related to hazards and risks. The use of symbols and graphical images is a simple safety system used to deliver safety messages at a glance.
A logo serve as a visual mark of a brand while transmitting the company’s message. It should embody a brand and be instantly recognizable. Let’s check out some of the logo trends of 2017 in this slide.
www.reachfirst.com
Exterior signage is a set of various signs such as storefronts, wall graphics, banners,
A-boards, tradeshow display, etc. used to achieve various advertising objectives.
High-visibility clothing is a kind of personal protective equipment with highly reflective properties. Workers use high-vis garments to improve their visibility while working in low light conditions.
<<<<www.coveroc.com>>>>
The term robotics deals with the process to design, build, and implement robots and computer systems in various applications.
Being diverse in application and capabilities, robots have been playing a decisive role in reshaping the production processes and achieving an unprecedented levels of output
Factors Effecting Pace and Adoption of AutomationSteven Tyler
Industrial automation refers to the use of automatic machines, robots, sensors, and other devices that perform certain industrial tasks with superior precision and repeatability.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
3. Starting physical prototype right away is
not a good approach. A thorough
planning can help engineers avoid
mistakes along the design process.
PAPER DESIGN IS ESSENTIAL
www.bpautomation.com
4. Extracting all the
possible information
generated by an idea and
getting those details on
paper lays the
foundation of a great
product development
process.
GETTING IDEAS ON
PAPER
www.bpautomation.com
5. GO ALL THE WAY - - - - - - -
www.bpautomation.com
8. A perfect execution of
a conceptual design
will enable you to
defense and stand up
to critique.
www.bpautomation.com
9. The use of a flowchart or
diagram would help you
define the true functionality
of your prototype design
www.bpautomation.com
10. Define & specify Your
Requirements, wants
and needs. More
importantly, stay
realistic.
www.bpautomation.com
11. Prototype development is a
process to use a conceptual
design to build a perfect
model for testing and
experimental purposes.
www.bpautomation.com
12. Define & specify Your Requirements, wants and
needs. More importantly, stay realistic.
www.bpautomation.com
13. BP AUTOMATION
BP Automation, an Edmonton-based
engineering company, strives to
achieve the highest industrial
automation standards in prototype
development and manufacturing.
www.bpautomation.com