Compare report 2 tx4rx 04102013
•Download as PPT, PDF•
0 likes•371 views
The document compares the performance of two network configurations, NUKM_C and BSDE_A, over multiple drive tests. It contains drive test data and summaries for each configuration under the copyright of ZTE Corporation and is marked for internal use only.
Report
Share
Report
Share
Recommended
Leadership - An Inspiration from Good to Great
A brief presentation on the Leadership and discussed the Level 5 hierarchy from Good to Great book, written by Jim Collins.
EDX Signal IQ overview
In-Building Planning tools came up in yesterday's in-building 101 webinar. Here's a good one we offer.
Wi fi[1]
Wi-Fi, also known as IEEE 802.11, is a set of standards that allow wireless devices to communicate. It operates in unlicensed frequency bands like 2.4 GHz and 5 GHz. There are different Wi-Fi standards that support varying speeds like 802.11b at 11 Mbps and 802.11a at 54 Mbps. Wi-Fi networks can be configured in different modes like ad-hoc for device-to-device or infrastructure which uses an access point. Access points allow multiple devices to connect and share a wireless signal. Wi-Fi uses techniques like spread spectrum, carrier sensing, and packetization to allow many devices to communicate simultaneously over the same wireless channel.
Personal Branding
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Asia Cell MPR Swap Project
This document summarizes the Asia Cell MPR Swap Project. It includes 3 key parts:
1) Project preparations which involve customer training on ALU products and quality installation standards as well as test links.
2) Project scope which involves site surveys, materials delivery, installation, commissioning, and acceptance testing.
3) Coordination efforts needed to manage the project locally given challenges like security issues and materials shortages.
Learning in Corporate Ladders
1. The document discusses 15 lessons for learning and advancement within a corporate environment, as narrated by Mr. Ekhlaque Ahmed. The lessons include showing responsibility, seizing opportunities, handling challenges tactfully, driving improvements, proving one's capabilities, never accepting limitations, raising the performance bar, and delivering results independently.
Hutton in-building-101
This document provides an introduction to distributed antenna systems (DAS) for indoor cellular and public safety repeaters. It defines key DAS terminology and components, discusses when to use active fiber DAS vs passive systems, industry drivers for indoor cellular coverage, and important considerations like donor signal strength and managing composite power. The document aims to give an overview of DAS design fundamentals to get readers started on indoor cellular and public safety system projects.
Harq
HARQ is a technique that combines error correction codes with automatic repeat requests (ARQ). It allows errors that are uncorrectable by the error correction code to be corrected through retransmissions. There are two main types of HARQ - Type I adds error detection and forward error correction to each message, while Type II alternates between message bits and error detecting parity bits. Soft combining improves performance by storing incorrectly received blocks and combining them with retransmissions. Incremental redundancy transmits different coded bits with each retransmission to provide the receiver with extra information each time. HARQ is used in mobile networks like UMTS to improve transmission reliability.
Recommended
Leadership - An Inspiration from Good to Great
A brief presentation on the Leadership and discussed the Level 5 hierarchy from Good to Great book, written by Jim Collins.
EDX Signal IQ overview
In-Building Planning tools came up in yesterday's in-building 101 webinar. Here's a good one we offer.
Wi fi[1]
Wi-Fi, also known as IEEE 802.11, is a set of standards that allow wireless devices to communicate. It operates in unlicensed frequency bands like 2.4 GHz and 5 GHz. There are different Wi-Fi standards that support varying speeds like 802.11b at 11 Mbps and 802.11a at 54 Mbps. Wi-Fi networks can be configured in different modes like ad-hoc for device-to-device or infrastructure which uses an access point. Access points allow multiple devices to connect and share a wireless signal. Wi-Fi uses techniques like spread spectrum, carrier sensing, and packetization to allow many devices to communicate simultaneously over the same wireless channel.
Personal Branding
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Asia Cell MPR Swap Project
This document summarizes the Asia Cell MPR Swap Project. It includes 3 key parts:
1) Project preparations which involve customer training on ALU products and quality installation standards as well as test links.
2) Project scope which involves site surveys, materials delivery, installation, commissioning, and acceptance testing.
3) Coordination efforts needed to manage the project locally given challenges like security issues and materials shortages.
Learning in Corporate Ladders
1. The document discusses 15 lessons for learning and advancement within a corporate environment, as narrated by Mr. Ekhlaque Ahmed. The lessons include showing responsibility, seizing opportunities, handling challenges tactfully, driving improvements, proving one's capabilities, never accepting limitations, raising the performance bar, and delivering results independently.
Hutton in-building-101
This document provides an introduction to distributed antenna systems (DAS) for indoor cellular and public safety repeaters. It defines key DAS terminology and components, discusses when to use active fiber DAS vs passive systems, industry drivers for indoor cellular coverage, and important considerations like donor signal strength and managing composite power. The document aims to give an overview of DAS design fundamentals to get readers started on indoor cellular and public safety system projects.
Harq
HARQ is a technique that combines error correction codes with automatic repeat requests (ARQ). It allows errors that are uncorrectable by the error correction code to be corrected through retransmissions. There are two main types of HARQ - Type I adds error detection and forward error correction to each message, while Type II alternates between message bits and error detecting parity bits. Soft combining improves performance by storing incorrectly received blocks and combining them with retransmissions. Incremental redundancy transmits different coded bits with each retransmission to provide the receiver with extra information each time. HARQ is used in mobile networks like UMTS to improve transmission reliability.
De waxing
The document describes the de-waxing and cleaning process of a 212km long 16" loop line to prepare it for pumping products. A piece of land was rented and equipment like compressors, pumps, and boilers were used. The process involved pigging the line with different pigs using crude oil, then sweeping crude oil out with compressed air and water, followed by hot water pigging and chemical cleaning. Over 66 pigging operations were conducted removing over 20,000kg of wax from the Kaziranga to Sekoni sector. A similar process was then conducted from Sekoni to Ghani removing less wax.
Need for sulphur measurement in multi product pipelines
The document discusses the need for rapid sulphur measurement in multi-product pipelines. It notes that different product batches are pushed through pipelines abutting each other, and accurate sulphur measurement is needed to minimize contamination between batches. The PAC Antek High Speed Sulphur Analyzer provides sulphur measurements in under 1 minute, much faster than other techniques, allowing for more precise interface detection between products to reduce contamination and transmix volumes. Field tests in India found the analyzer could save over $4,000 per product cut compared to slower analyzing techniques.
Importance & Future of Location Based Services (LBS)
This document thanks unnamed individuals for allowing the use of their pictures in an educational presentation. It then provides a brief biography of Syed Abdul Basit identifying him as a telecom professional, marketer, and mobile VAS expert. The rest of the document contains short sections defining terms like SOLOMO and considering the differences between mobile, location and social. It outlines six elements of each: mobile devices have apps and sensors, location has position and proximity, and social has close friends and sharing platforms.
Vhf communication system for cross country pipelines
This document discusses the implementation of a VHF radio trunking communication system for an oil pipeline running between Mundra and Delhi in India. It provides secure and independent communication between vehicles, handheld radios, and fixed locations along the pipeline. The system allows for different types of calls including private calls, group calls, and emergency calls. It ensures communication continuity as users move between different locations along the pipeline route. The benefits highlighted are 24/7 seamless communication for enhanced pipeline security without reliance on external cellular networks.
Dc hspatechnology-120919125703-phpapp01
DC-HSPA+ is a mobile broadband technology that aggregates two 5MHz carriers to provide download speeds of up to 42Mbps. It doubles the speed capabilities of HSPA+ by using dual carriers for the downlink, with one carrier acting as an anchor and the other as supplementary. This allows users to be served using two carriers simultaneously instead of one as in HSPA+, effectively doubling throughput. DC-HSPA+ also provides benefits like carrier load balancing and backward compatibility with earlier 3G releases. Real-world tests showed speeds were doubled compared to HSPA+ alone.
3 gpp lte-rlc (1)
The document describes the Radio Link Control (RLC) sub layer in 3GPP LTE, including its functions, modes of operation (unacknowledged, acknowledged, and transparent), state variables, procedures for transmitting and receiving data, and retransmission processes. The RLC sub layer provides transfer of upper layer PDUs, error correction, segmentation/reassembly, reordering, duplication detection, and supports both acknowledged and unacknowledged data transfer.
Lte attach-messaging
The document describes the signaling flow and messages exchanged between the various network entities during the LTE attach procedure and default bearer activation for a UE. It provides details on the S1AP, S6a, S11 and NAS messages with information elements like IMSI, GUTI, QoS parameters, GTP tunneling endpoints etc. exchanged at each step of the procedure to establish the default data path for a UE attaching to the network.
Rocket Internet Overview 2014
This document provides an introduction and disclaimer for a presentation by Rocket Internet about identifying, building, and scaling leading online companies globally. The presentation team includes founders and executives from Rocket Internet with experience at companies like Google, Goldman Sachs, and BCG. The document outlines Rocket Internet's mission to create the largest internet platform outside of China and the US. It provides an overview of Rocket's global reach across over 100 countries and key regions/sectors of focus, and notes their local footprint covers 9 of Facebook's top 10 cities by users.
Control plane
This document discusses the key interfaces, architecture, and procedures related to control and user planes, mobility management, and connection management in 3G networks. The control plane handles protocols for controlling radio access bearers and the connection between UE and network. It has physical, data link, and network layers. The user plane is responsible for transferring user data through access and core network protocols. Mobility management allows tracking and delivering services to mobile subscribers via location management, registration, and security functions. Connection management establishes and maintains connections to exchange information with peer entities.
Sync in 3 g
The document discusses synchronization in 3G networks. It describes that synchronization is used for the cell search procedure where the UE searches for and locks onto an appropriate cell. The cell search procedure involves 3 steps - slot synchronization, frame synchronization and code group identification, and scrambling code identification. This is done using the synchronization channel (SCH), which consists of the primary synchronization channel (P-SCH) and secondary synchronization channel (S-SCH). The SCH enables slot synchronization using primary synchronization codes and frame synchronization and code group identification using secondary synchronization codes. Finally, scrambling code identification determines the exact scrambling code of the cell.
Top 10 rf engineer interview questions and answers
This document provides information and resources for RF engineer interview preparation, including sample interview questions and answers. Ten common RF engineer interview questions are listed, such as "Why do you want this RF engineer job?" and "What challenges are you looking for in this position?". Additional links are provided for ebooks on interview questions, tips for different types of interviews, and suggested questions to ask the interviewer. The resources covered can help candidates learn about the interview process and how to effectively promote their qualifications and fit for an RF engineering role.
3G cluster optimization guide
This document contains an analysis of pilot pollution and optimization suggestions for several sectors across multiple sites. Key areas of focus include adjusting elevation tilt, increasing pilot power, and adding a new site to address gaps in coverage. Suggestions are provided to help reduce interference and improve signal quality.
Impact of channel in wireless communication
Wireless telecommunications involves the transfer of information between two or more points without a physical connection. It uses forms of energy like radio frequencies to transmit information over various distances, from a few meters to thousands of kilometers. While wireless operations allow for long-range communication without wires, the wireless channel is susceptible to factors like interference, path loss, and fading that restrict reliability and throughput. Adaptation techniques and MIMO can help improve performance but spectrum and interference remain limitations of wireless networks.
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
This document provides guidance on optimizing upload rate performance in GSM networks. It discusses factors that affect the upload rate such as uplink bandwidth, uplink coding scheme selection and adjustment, timely return of ACK messages, and TBF establishment and release flows. It provides analysis and recommendations for optimizing aspects like uplink bandwidth allocation, adjusting uplink coding schemes based on signal quality, and modifying power control parameters. The overall goal is to analyze and address differences between upload and download performance optimization.
Presentation
This document summarizes a student's DSP project on linear prediction models presented to Viet Nam National University- Ho Chi Minh City. It covers topics such as linear predictive coding (LPC), the least mean square error, the Levinson-Durbin algorithm, sub-band linear prediction models, and using prediction models for frequency-domain signal restoration. LPC is introduced as a powerful speech analysis technique that models the spectral envelope of digital speech signals using a linear predictive model of past samples. The prediction error signal and mean square prediction error are also discussed.
Concentric & Dual Band Cells
A detailed document on Concentric cells and their related parameters in Alcatel and Motorola 2G Systems.
Seatools dos-guide
SeaTools for DOS is a diagnostic tool that tests Seagate and Maxtor hard disk drives from DOS. It includes several tests to examine the physical media and detect any issues. The document provides instructions on booting from the SeaTools CD, selecting drives and tests to run, interpreting test results, and options for secure erasing or setting drive capacity. Key features include the short and long tests to check for defects, fixing bad sectors if found, and providing a SeaTools test code for warranty claims if a drive fails.
2014 Wind Turbine Blade Workshop- Jensen
Bladena provides structural enhancement technologies to strengthen wind turbine blades and reduce maintenance costs. They are developing a Guide2Defect database to catalog blade defects observed by wind turbine operators and help optimize maintenance strategies. This will provide better statistical data on failure rates to inform maintenance planning and cost modeling. Bladena also performs root cause analysis of blade failures to understand causes and make recommendations to prevent future issues.
Geek Sync | How to Think Like the SQL ServerEngine - Brent Ozar
The document discusses how the SQL Server engine processes queries and how to optimize query performance. It covers topics like the impact of indexing, sorting, filtering and statistics on query execution plans. Specific lessons include that WHERE clauses without a supporting index require a full table scan, ORDER BY clauses require extra CPU work for sorting unless there is a supporting index, and that index seeks may still end up reading many rows so scans are not always worse. It also discusses how statistics help SQL Server estimate cardinality and pick execution plans, but are not always accurate.
Gen2 performance
GEN2 is an antilock braking system that outperforms competitors through faster reaction time, more precise control of air modulation through 1000 calculations per second, and complete tire release to eliminate flat spotting and scuffing. It provides savings through lower unit costs than competitors, as well as reducing costs associated with tire replacement and component wear. GEN2 can be monitored through a smartphone or tablet interface and is the only ABS that displays both active and stored fault codes to simplify diagnostics.
Umtsrns 208 omcr configuration(rnc data configuration)
This document provides a summary of the configuration steps for data on a ZXWR RNC (V3.07.310) radio network controller. It includes global RNC configuration, fast configuration of RNC ground resources and NodeBs, RNC ground resource management, radio resource management, and MML character terminal settings. The document contains detailed instructions and flowcharts to guide users through various interface, resource, and network element configurations for the RNC system.
Umtsrns 208 omcr configuration(rnc data configuration)
This document provides a summary of the configuration steps for data on a ZXWR RNC (V3.07.310) radio network controller. It includes global RNC configuration, fast configuration of RNC ground resources and NodeBs, RNC ground resource management, radio resource management, and MML character terminal settings. The document contains detailed instructions and flowcharts to guide users through various interface, resource, and network element configurations for the RNC system.
More Related Content
Viewers also liked
De waxing
The document describes the de-waxing and cleaning process of a 212km long 16" loop line to prepare it for pumping products. A piece of land was rented and equipment like compressors, pumps, and boilers were used. The process involved pigging the line with different pigs using crude oil, then sweeping crude oil out with compressed air and water, followed by hot water pigging and chemical cleaning. Over 66 pigging operations were conducted removing over 20,000kg of wax from the Kaziranga to Sekoni sector. A similar process was then conducted from Sekoni to Ghani removing less wax.
Need for sulphur measurement in multi product pipelines
The document discusses the need for rapid sulphur measurement in multi-product pipelines. It notes that different product batches are pushed through pipelines abutting each other, and accurate sulphur measurement is needed to minimize contamination between batches. The PAC Antek High Speed Sulphur Analyzer provides sulphur measurements in under 1 minute, much faster than other techniques, allowing for more precise interface detection between products to reduce contamination and transmix volumes. Field tests in India found the analyzer could save over $4,000 per product cut compared to slower analyzing techniques.
Importance & Future of Location Based Services (LBS)
This document thanks unnamed individuals for allowing the use of their pictures in an educational presentation. It then provides a brief biography of Syed Abdul Basit identifying him as a telecom professional, marketer, and mobile VAS expert. The rest of the document contains short sections defining terms like SOLOMO and considering the differences between mobile, location and social. It outlines six elements of each: mobile devices have apps and sensors, location has position and proximity, and social has close friends and sharing platforms.
Vhf communication system for cross country pipelines
This document discusses the implementation of a VHF radio trunking communication system for an oil pipeline running between Mundra and Delhi in India. It provides secure and independent communication between vehicles, handheld radios, and fixed locations along the pipeline. The system allows for different types of calls including private calls, group calls, and emergency calls. It ensures communication continuity as users move between different locations along the pipeline route. The benefits highlighted are 24/7 seamless communication for enhanced pipeline security without reliance on external cellular networks.
Dc hspatechnology-120919125703-phpapp01
DC-HSPA+ is a mobile broadband technology that aggregates two 5MHz carriers to provide download speeds of up to 42Mbps. It doubles the speed capabilities of HSPA+ by using dual carriers for the downlink, with one carrier acting as an anchor and the other as supplementary. This allows users to be served using two carriers simultaneously instead of one as in HSPA+, effectively doubling throughput. DC-HSPA+ also provides benefits like carrier load balancing and backward compatibility with earlier 3G releases. Real-world tests showed speeds were doubled compared to HSPA+ alone.
3 gpp lte-rlc (1)
The document describes the Radio Link Control (RLC) sub layer in 3GPP LTE, including its functions, modes of operation (unacknowledged, acknowledged, and transparent), state variables, procedures for transmitting and receiving data, and retransmission processes. The RLC sub layer provides transfer of upper layer PDUs, error correction, segmentation/reassembly, reordering, duplication detection, and supports both acknowledged and unacknowledged data transfer.
Lte attach-messaging
The document describes the signaling flow and messages exchanged between the various network entities during the LTE attach procedure and default bearer activation for a UE. It provides details on the S1AP, S6a, S11 and NAS messages with information elements like IMSI, GUTI, QoS parameters, GTP tunneling endpoints etc. exchanged at each step of the procedure to establish the default data path for a UE attaching to the network.
Rocket Internet Overview 2014
This document provides an introduction and disclaimer for a presentation by Rocket Internet about identifying, building, and scaling leading online companies globally. The presentation team includes founders and executives from Rocket Internet with experience at companies like Google, Goldman Sachs, and BCG. The document outlines Rocket Internet's mission to create the largest internet platform outside of China and the US. It provides an overview of Rocket's global reach across over 100 countries and key regions/sectors of focus, and notes their local footprint covers 9 of Facebook's top 10 cities by users.
Control plane
This document discusses the key interfaces, architecture, and procedures related to control and user planes, mobility management, and connection management in 3G networks. The control plane handles protocols for controlling radio access bearers and the connection between UE and network. It has physical, data link, and network layers. The user plane is responsible for transferring user data through access and core network protocols. Mobility management allows tracking and delivering services to mobile subscribers via location management, registration, and security functions. Connection management establishes and maintains connections to exchange information with peer entities.
Sync in 3 g
The document discusses synchronization in 3G networks. It describes that synchronization is used for the cell search procedure where the UE searches for and locks onto an appropriate cell. The cell search procedure involves 3 steps - slot synchronization, frame synchronization and code group identification, and scrambling code identification. This is done using the synchronization channel (SCH), which consists of the primary synchronization channel (P-SCH) and secondary synchronization channel (S-SCH). The SCH enables slot synchronization using primary synchronization codes and frame synchronization and code group identification using secondary synchronization codes. Finally, scrambling code identification determines the exact scrambling code of the cell.
Top 10 rf engineer interview questions and answers
This document provides information and resources for RF engineer interview preparation, including sample interview questions and answers. Ten common RF engineer interview questions are listed, such as "Why do you want this RF engineer job?" and "What challenges are you looking for in this position?". Additional links are provided for ebooks on interview questions, tips for different types of interviews, and suggested questions to ask the interviewer. The resources covered can help candidates learn about the interview process and how to effectively promote their qualifications and fit for an RF engineering role.
3G cluster optimization guide
This document contains an analysis of pilot pollution and optimization suggestions for several sectors across multiple sites. Key areas of focus include adjusting elevation tilt, increasing pilot power, and adding a new site to address gaps in coverage. Suggestions are provided to help reduce interference and improve signal quality.
Impact of channel in wireless communication
Wireless telecommunications involves the transfer of information between two or more points without a physical connection. It uses forms of energy like radio frequencies to transmit information over various distances, from a few meters to thousands of kilometers. While wireless operations allow for long-range communication without wires, the wireless channel is susceptible to factors like interference, path loss, and fading that restrict reliability and throughput. Adaptation techniques and MIMO can help improve performance but spectrum and interference remain limitations of wireless networks.
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
This document provides guidance on optimizing upload rate performance in GSM networks. It discusses factors that affect the upload rate such as uplink bandwidth, uplink coding scheme selection and adjustment, timely return of ACK messages, and TBF establishment and release flows. It provides analysis and recommendations for optimizing aspects like uplink bandwidth allocation, adjusting uplink coding schemes based on signal quality, and modifying power control parameters. The overall goal is to analyze and address differences between upload and download performance optimization.
Presentation
This document summarizes a student's DSP project on linear prediction models presented to Viet Nam National University- Ho Chi Minh City. It covers topics such as linear predictive coding (LPC), the least mean square error, the Levinson-Durbin algorithm, sub-band linear prediction models, and using prediction models for frequency-domain signal restoration. LPC is introduced as a powerful speech analysis technique that models the spectral envelope of digital speech signals using a linear predictive model of past samples. The prediction error signal and mean square prediction error are also discussed.
Concentric & Dual Band Cells
A detailed document on Concentric cells and their related parameters in Alcatel and Motorola 2G Systems.
Viewers also liked (16)
Need for sulphur measurement in multi product pipelines
Need for sulphur measurement in multi product pipelines
Importance & Future of Location Based Services (LBS)
Importance & Future of Location Based Services (LBS)
Vhf communication system for cross country pipelines
Vhf communication system for cross country pipelines
Top 10 rf engineer interview questions and answers
Top 10 rf engineer interview questions and answers
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
Similar to Compare report 2 tx4rx 04102013
Seatools dos-guide
SeaTools for DOS is a diagnostic tool that tests Seagate and Maxtor hard disk drives from DOS. It includes several tests to examine the physical media and detect any issues. The document provides instructions on booting from the SeaTools CD, selecting drives and tests to run, interpreting test results, and options for secure erasing or setting drive capacity. Key features include the short and long tests to check for defects, fixing bad sectors if found, and providing a SeaTools test code for warranty claims if a drive fails.
2014 Wind Turbine Blade Workshop- Jensen
Bladena provides structural enhancement technologies to strengthen wind turbine blades and reduce maintenance costs. They are developing a Guide2Defect database to catalog blade defects observed by wind turbine operators and help optimize maintenance strategies. This will provide better statistical data on failure rates to inform maintenance planning and cost modeling. Bladena also performs root cause analysis of blade failures to understand causes and make recommendations to prevent future issues.
Geek Sync | How to Think Like the SQL ServerEngine - Brent Ozar
The document discusses how the SQL Server engine processes queries and how to optimize query performance. It covers topics like the impact of indexing, sorting, filtering and statistics on query execution plans. Specific lessons include that WHERE clauses without a supporting index require a full table scan, ORDER BY clauses require extra CPU work for sorting unless there is a supporting index, and that index seeks may still end up reading many rows so scans are not always worse. It also discusses how statistics help SQL Server estimate cardinality and pick execution plans, but are not always accurate.
Gen2 performance
GEN2 is an antilock braking system that outperforms competitors through faster reaction time, more precise control of air modulation through 1000 calculations per second, and complete tire release to eliminate flat spotting and scuffing. It provides savings through lower unit costs than competitors, as well as reducing costs associated with tire replacement and component wear. GEN2 can be monitored through a smartphone or tablet interface and is the only ABS that displays both active and stored fault codes to simplify diagnostics.
Umtsrns 208 omcr configuration(rnc data configuration)
This document provides a summary of the configuration steps for data on a ZXWR RNC (V3.07.310) radio network controller. It includes global RNC configuration, fast configuration of RNC ground resources and NodeBs, RNC ground resource management, radio resource management, and MML character terminal settings. The document contains detailed instructions and flowcharts to guide users through various interface, resource, and network element configurations for the RNC system.
Umtsrns 208 omcr configuration(rnc data configuration)
This document provides a summary of the configuration steps for data on a ZXWR RNC (V3.07.310) radio network controller. It includes global RNC configuration, fast configuration of RNC ground resources and NodeBs, RNC ground resource management, radio resource management, and MML character terminal settings. The document contains detailed instructions and flowcharts to guide users through various interface, resource, and network element configurations for the RNC system.
Umtsrns 208 omcr configuration(rnc data configuration)
This document provides a summary of the configuration steps for data on a ZXWR RNC (V3.07.310) radio network controller, including:
1. Global RNC configuration such as creating a UTRAN subnetwork and RNC managed element.
2. Fast configuration of RNC ground resources, NodeBs, and radio resources.
3. Detailed configuration of RNC ground resources including physical resources, transmission configuration, NE information, and Sigtran.
It is intended for internal use at ZTE Corporation and contains 94 pages of technical documentation.
windows10-21h1.pptx
The document reports on testing Creo software for compatibility with Windows 10 version 21H1. It was found that opening parts and assemblies from the Creo file format and saving them back to Creo worked correctly. Drafting automation, drawing features like repeat regions, and checking for fatal errors were also found to be fully functional in Windows 10 21H1.
Getting The Most Out Of Your Flash/SSDs
One of the most important things you can do to improve the performance of your flash/SSDs with Aerospike is to properly prepare them. This Presentation goes through how to select, test, and prepare the drives so that you will get the best performance and lifetime out of them.
Similar to Compare report 2 tx4rx 04102013 (9)
Geek Sync | How to Think Like the SQL ServerEngine - Brent Ozar
Geek Sync | How to Think Like the SQL ServerEngine - Brent Ozar
Umtsrns 208 omcr configuration(rnc data configuration)
Umtsrns 208 omcr configuration(rnc data configuration)
Umtsrns 208 omcr configuration(rnc data configuration)
Umtsrns 208 omcr configuration(rnc data configuration)
Umtsrns 208 omcr configuration(rnc data configuration)
Umtsrns 208 omcr configuration(rnc data configuration)
More from Virak Sou
2 drive test analysis ver1
The document discusses drive test data analysis procedures. It begins with an overview of the common procedures for analyzing drive test data, which includes checking KPI requirements, coverage distributions, problematic points, and identifying and verifying solutions. It then covers specific issues that may be identified such as coverage holes, sudden signal drops, lack of a dominant server, overlapping coverage, and crossed feeders. Methods for detecting these issues through drive test data are provided. Potential causes of poor signal quality are also examined, along with solutions to improve quality issues.
Smart antenna algorithm and application
This document discusses smart antenna technology and algorithms. It begins with an introduction to smart antennas, including their ability to adaptively steer beams toward desired signals and null interfering signals. It then describes two common smart antenna algorithms - Least Mean Squares (LMS) and Sample Matrix Inversion (SMI). Simulation results are presented comparing the performance of LMS and SMI for interference cancellation. SMI provides deeper nulls but requires matrix inversion, while LMS converges more slowly but is computationally simpler. Overall, the document analyzes and compares smart antenna beamforming algorithms.
M2000 operation-guide
This document provides an overview and instructions for using the M2000 network management system. It describes logging into the M2000 client, setting up the client interface, connecting network elements, managing network topology including creating subnets and links, and processing alarms including querying, acknowledging and clearing alarms. The document contains 10 chapters that guide users such as network operators on basic configuration and use of the M2000 system.
Mb ug
This document is the user guide for MapBasic version 9.0. It provides information on installing and getting started with MapBasic, an overview of new and enhanced features in version 9.0, and documentation on using the MapBasic development environment. The guide includes chapters on the basics of MapBasic syntax and programming, as well as tutorials and reference material.
Slide 11516
This document provides an overview of WCDMA technology. It discusses the evolution of mobile networks from 1G to 3G, highlighting the need for 3G networks to support higher data rates. It introduces UMTS and WCDMA as 3G standards, with WCDMA being the radio access technology used in UMTS networks. Key concepts of WCDMA such as spreading, scrambling, power control and handover are described at a high level. The document also provides basic information on WCDMA channels and packet access.
Ibwave propagation quick start guide
This document provides a quick start guide for using the propagation module in iBwave Design version 5.0. It outlines how to import walls from CAD or image files, set prediction properties, run predictions, and view the results. Key steps include importing a .vex file to define wall materials, importing walls from files using default settings, assigning wall heights, adding antennas and running predictions, customizing output maps and legends, and using the signal probe tool. Followed correctly, these steps allow users to efficiently model indoor propagation scenarios and view wireless coverage predictions in iBwave Design.
Mimo
The document provides an overview of MIMO (multiple-input multiple-output) systems in wireless communications. It discusses how MIMO can provide array gain, diversity gain, and multiplexing gain to improve spectral efficiency, coverage, and quality of service. It also describes how MIMO reduces co-channel interference. The document covers MIMO channel models and capacity results for different scenarios. It concludes by discussing how MIMO can be used to maximize diversity or throughput through different transmission techniques.
Mimo
This document discusses multiple-input multiple-output (MIMO) systems. It begins by outlining the motivations and aspirations for developing MIMO systems, including achieving high data rates near 1 gigabit/second while maintaining quality of service. It then provides an overview of MIMO system modeling and capacity studies. Key topics covered include diversity versus spatial multiplexing design criteria, example architectures, MIMO with orthogonal frequency-division multiplexing, and networking applications involving MAC protocols.
MIMO system (potential candidate for 4G system)
This document provides an overview of MIMO (multiple-input multiple-output) systems in wireless communications. It discusses how MIMO can provide various performance improvements, including array gain through signal combining, diversity gain to combat fading, and multiplexing gain to increase spectral efficiency. It also covers MIMO channel capacity calculations for different channel models, as well as techniques for maximizing diversity or throughput such as space-time coding and spatial multiplexing. The key advantages of MIMO for future wireless systems are higher data rates, quality of service, coverage, and spectral efficiency.
using query with MI
The document discusses how to perform spatial queries in MapInfo to determine relationships between data layers based on their spatial properties, including using operators like within, contain, and intersect, as well as creating buffers around features. It provides steps for using spatial SQL queries to find which parcels are within a contaminated soil area. The goal is for students to learn how to query multiple data layers spatially when the only relationship between them is spatial location.
4G amercias_mimo_smart_antennas_wp_2013jul
The document discusses MIMO and smart antenna technologies used in LTE networks. It describes how LTE supports various MIMO configurations from 1x2 up to 8x8 with multiple transmission modes. The most commonly used mode is closed-loop spatial multiplexing MIMO (TM4) which uses channel feedback to improve data rates. MIMO provides the best performance in low mobility environments where channel information is accurate. The document also discusses beamforming, angle of arrival techniques, and challenges with using MIMO in high speed or full network capacity scenarios.
Test case node b upgrade
The document outlines test cases for upgrading Node B equipment. It describes 6 test cases evaluating voice call, video call, data download and upload speeds, and handovers at stationary sectors across 4 sites. Each test case involves testing these metrics for 2 mobile stations. A results table is included to record the pass/fail status of each test case.
Ais 3 g_2100m_hz_ne_b1 udn11 overshoot analysis
This document summarizes the drive test results and proposed solutions for several sites in the UDN11 cluster. It found overshooting sectors at multiple sites and recommends reducing the E-tilt, P-CPICH power, or adjusting the tilt settings for the affected sectors to address the issues. It also provides the SHO ratio calculation method using Uu_ActiveSet_Count statistics for the UDN11 cluster.
Cqi basics
The document discusses Channel Quality Indicator (CQI) reporting in HSDPA networks. It states that the CQI value reported by a terminal is a function of the multipath environment, terminal receiver type, ratio of interference from the own base station versus others, and expected HSDPA power availability from the base station. This approach allows CQI to accommodate different receiver implementations and environments to indicate the best data rates needed. CQI informs the base station scheduler of the data rate the terminal can receive. The higher the assumed HSDPA power allocation and the closer to the base station, the higher the reported CQI value.
Ssv template
The document is a single site verification report for a 3G UTRAN site. It includes information on site details, OMC data, RF performance checklists for voice and data services, coverage maps from drive tests, and throughput tests. Overall, the summaries indicate the site's coverage and performance are normal based on the plots and statistics provided in the report.
More from Virak Sou (16)
Recently uploaded
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneThe History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdConstructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Topic : Bed making
Subject : Nursing Foundation
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
Recently uploaded (20)
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Compare report 2 tx4rx 04102013
- 1. Compare Report 2Tx4Rx NUKM_C & BSDE_A
- 2. > Internal Only 2Tx4Rx – NUKM_C and BSDE_A NUKM_C NUKM_C BSDE_A BSDE_A © ZTE Corporation. All rights reserved.
- 3. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 4. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 5. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 6. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 7. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 8. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 9. > Internal Only Drive Test Compare © ZTE Corporation. All rights reserved.
- 10. > Internal Only Drive Test Summary © ZTE Corporation. All rights reserved.
- 11. Thanks! © ZTE Corporation. All rights reserved.
Editor's Notes
- {}