Compare between the two light microscope:
Solution
Feature
1. Similar functional parts : source of light is same - visible light is used by focusing the light
either through lenses or prism on the specimen.
2. Dissimilar functional parts : Compound microscope- has multiple objective lenses with one
eyepiece;
Dissecting Microscope- has single objective lens with two eyepiece lenses
3. Purpose of use : Dissecting microscope: used to perform small dissections under the
microscope and to view live specimen , compound microscope- used to visualise things that are
too small to be seen via the naked eye.
7. Maximum magnification: Compound microscope- up to 1000x ; Dissecting microscope- up to
70x
4. Image dimension : -
5. Image orientation : -
6. Image development: no image development or orientation or dimensions- these are all
properties of electron microscopes
3. Purpose of use : Dissecting microscope: used to perform small dissections under the
microscope and to view live specimen , compound microscope- used to visualise things that are
too small to be seen via the naked eye.
7. Maximum magnification: Compound microscope- up to 1000x ; Dissecting microscope- up to
70x
4. Image dimension : -.
LIGHT MICROSCOPY by SIVASANGARI SHANMUGAM
The optical microscope, The functions of a light microscope is based on its ability to focus a beam of light through, which is very small and transparent, to produce an image.
This ppt contain all about Bright field simple microscope.
Here You can find uses, parts and principle and limitation of Bright field simple microscope.
you can also understand the difference between bright field simple microscope and bright field compound microscope.
LIGHT MICROSCOPY by SIVASANGARI SHANMUGAM
The optical microscope, The functions of a light microscope is based on its ability to focus a beam of light through, which is very small and transparent, to produce an image.
This ppt contain all about Bright field simple microscope.
Here You can find uses, parts and principle and limitation of Bright field simple microscope.
you can also understand the difference between bright field simple microscope and bright field compound microscope.
The Compound Microscope. This lesson will teach you about the development and history of the microscope itself, different types of microscopes and comparison between them, the description of their parts and functions and formulas on our topic. Furthermore, click the link at the end of the slide to learn more about the microscope how does it works and affects us.
A microscope is an instrument used to observe very small organisms i.e. microorganisms. The microscope provides magnification and resolution which makes the image enlarged and fine. There are different types of microscopes ranging from simple to compound microscopes.
3. Microscope simple, compound & stereo - BasicsNethravathi Siri
Basics only
A compound microscope is an optical instrument used to observe the magnified images of small objects on a glass slide. Compound microscopes are so called because they are designed with a compound lens system.
On April 18, 1906, an earthquake killed over 3,000 people when it hi.pdfarracollection
On April 18, 1906, an earthquake killed over 3,000 people when it hit San Francisco, with a
magnitude of 8.3 on the Richter Scale. On March 11, 2011 the “Tohoku” earthquake hit central
Japan with a magnitude of 9.0 on the Richter Scale, and killed 15, 894 people. How much greater
was the 2011 earthquake than the 1906 earthquake?
Solution
The formula of magnitude of earthquake is
M=log(I/S)
I is the intensity of the earthquake And S is the intensity of the standard earthquake
8.3 = log(I1/S) and 9= log(I2/S)
9-8.3= log(I2/S) -log(I1/S)
.7= log(I2/I1)
I2/I1=10.7
I2=5 I1
Therefore the earhquake occurs in 2011 is 5 times more intense as compared to earthquake
occurs in 1906.
On the planet of Caracas, in the Stellar Solorais Ka Chunk Galaxy, th.pdfarracollection
On the planet of Caracas, in the Stellar Solorais Ka Chunk Galaxy, there is a population of
Nugget Arians. Two phenotypes of interest are: Peanuts; and Carmelaoid. Each is a single gene
trait, and for each gene there are two alleles. A cross between a female with Peanuts and a male
with Carmelaoid (each of which is homozygous for the wild-type (non-trait) allele at the other
gene) produces the following F1 counts: The mode of inheritance for each phenotype is: Peanuts
= Autosomal Recessive. Carmelaoid = Autosomal Dominant. Peanuts = Autosomal Recessive.
Carmelaoid = Autosomal Recessive. Peanuts = Autosomal Recessive. Carmelaoid = X-linked
Recessive. Peanuts = Autosomal Dominant. Carmelaoid = Autosomal Recessive. Peanuts =
Autosomal Dominant. Carmelaoid = Autosomal Dominant.
Solution
The answer is C. Peanuts=Autosomal Recessive
Carmeloid=X-linked recessive.
As
Autosomal characters of male are not carried to progeny so autosomal inheritance is othrwise
called maternal inheritance. As carmelaoid phenotype from male is expressed in F1 so it has to
be in cromosome and from the probability of expression it is evident that it is present in X
cromosome. The male counterpart like sperm carry very little of cytoplasmic material but half of
chromosomal meterial. In human type sex determination i.e.XY male and XX female X linked
recessive genes only express in homozygous i.e. XX condition..
More Related Content
Similar to Compare between the two light microscope SolutionFeature1. .pdf
The Compound Microscope. This lesson will teach you about the development and history of the microscope itself, different types of microscopes and comparison between them, the description of their parts and functions and formulas on our topic. Furthermore, click the link at the end of the slide to learn more about the microscope how does it works and affects us.
A microscope is an instrument used to observe very small organisms i.e. microorganisms. The microscope provides magnification and resolution which makes the image enlarged and fine. There are different types of microscopes ranging from simple to compound microscopes.
3. Microscope simple, compound & stereo - BasicsNethravathi Siri
Basics only
A compound microscope is an optical instrument used to observe the magnified images of small objects on a glass slide. Compound microscopes are so called because they are designed with a compound lens system.
On April 18, 1906, an earthquake killed over 3,000 people when it hi.pdfarracollection
On April 18, 1906, an earthquake killed over 3,000 people when it hit San Francisco, with a
magnitude of 8.3 on the Richter Scale. On March 11, 2011 the “Tohoku” earthquake hit central
Japan with a magnitude of 9.0 on the Richter Scale, and killed 15, 894 people. How much greater
was the 2011 earthquake than the 1906 earthquake?
Solution
The formula of magnitude of earthquake is
M=log(I/S)
I is the intensity of the earthquake And S is the intensity of the standard earthquake
8.3 = log(I1/S) and 9= log(I2/S)
9-8.3= log(I2/S) -log(I1/S)
.7= log(I2/I1)
I2/I1=10.7
I2=5 I1
Therefore the earhquake occurs in 2011 is 5 times more intense as compared to earthquake
occurs in 1906.
On the planet of Caracas, in the Stellar Solorais Ka Chunk Galaxy, th.pdfarracollection
On the planet of Caracas, in the Stellar Solorais Ka Chunk Galaxy, there is a population of
Nugget Arians. Two phenotypes of interest are: Peanuts; and Carmelaoid. Each is a single gene
trait, and for each gene there are two alleles. A cross between a female with Peanuts and a male
with Carmelaoid (each of which is homozygous for the wild-type (non-trait) allele at the other
gene) produces the following F1 counts: The mode of inheritance for each phenotype is: Peanuts
= Autosomal Recessive. Carmelaoid = Autosomal Dominant. Peanuts = Autosomal Recessive.
Carmelaoid = Autosomal Recessive. Peanuts = Autosomal Recessive. Carmelaoid = X-linked
Recessive. Peanuts = Autosomal Dominant. Carmelaoid = Autosomal Recessive. Peanuts =
Autosomal Dominant. Carmelaoid = Autosomal Dominant.
Solution
The answer is C. Peanuts=Autosomal Recessive
Carmeloid=X-linked recessive.
As
Autosomal characters of male are not carried to progeny so autosomal inheritance is othrwise
called maternal inheritance. As carmelaoid phenotype from male is expressed in F1 so it has to
be in cromosome and from the probability of expression it is evident that it is present in X
cromosome. The male counterpart like sperm carry very little of cytoplasmic material but half of
chromosomal meterial. In human type sex determination i.e.XY male and XX female X linked
recessive genes only express in homozygous i.e. XX condition..
Muv is homozygous You have a C. elegans worm with the following geno.pdfarracollection
Muv is homozygous You have a C. elegans worm with the following genotype: + dpy/lov +;
muv Where, dpy, lov and muv are alleles for these recessive phenotypes: Dpy = dumpy (short
and fat) Lov= mating behavior defective Muv = multivulva After taking a minute to feel sorry
for this poor worm, answer the following questions: What gene(s) is this animal heterozygous
for? What gene(s) is this animal homozygous for? What genes(s) are located on the same
chromosome? What is the phenotype of this animal? Assuming lov and dpy loci are 20cM
apart, what are the phenotypes, genotypes and expected frequencies of this hermaphrodite\'s self-
progeny? Percentage Phenotype
Solution
5.1: The animal is heterozygous for dpy and lov genes.
5.2: The animal is homozygous for muv gene.
5.3: The dpy and muv genes are located on the same chromosome.
5.4: Phenotype of animal= long and thin; mating behaviour, multivulva..
Material Science (Solidification)What is the solute atoms concent.pdfarracollection
Material Science: (Solidification)
What is the solute atoms concentration with position for a directional solidification of alloy?
Please don\'t answer if you don\'t know the right answer. Thanks.
Solution
During directional solidification, the solute atom concentration increases with increase in
distance from the outside surface. For example during solidification of a spherical casting, the
solute concentration will be maximum at the core and minimum on the surface..
Let P[x] denote the vector space of all polynomials. Let E be the set.pdfarracollection
Let P[x] denote the vector space of all polynomials. Let E be the set of polynomials which only
contain terms of even degree of even degree. Is E a subspace of P[x]? Explain.
Solution
Let E be the set as given in the problem
E = { f(x)| f(x) contains only terms of even degree}
= { g(x2)| g any polynomial in F[x]}
If g and h are any polynomials in F[x], clearly g+h and cg are polynomials in F[x] and
(g+h)(x2) and cg(x2) belong to E (for any scalar c in F).
So E is closed under vector addition and scalar multiplication. So E is a subspace of F.
In a tube containing 1 ml of a 15 dilution of A, and 4 ml of a 110.pdfarracollection
In a tube containing 1 ml of a 1:5 dilution of A, and 4 ml of a 1:100 dilution of B:
What is the final dilution of substance A?
What is the final dilution of substance B?
Solution
What is the final dilution of substance A?
When 1mL substance A is mixed with 4 mL of Substance B, four dilution of substance A
happens.
original=1/5
Further =1/4
Final = 1/5 x1/4 = 1/20 fold dilution
What is the final dilution of substance B?
When 4mL substance B is mixed with 1 mL of Substance A, = times
original=1/100
Further =4/5
Final = 1/100 x 4/5 = 4/500 fold dilution.
Implement a function called getElements() that takes in two lists. T.pdfarracollection
Implement a function called getElements() that takes in two lists. The first list L consists of any
type of items and the second list P consists of a list of integers. The implemented function will
return a list consisting of the element in L that are in positions indicated by P. For example, if
P=1, 7, 3, then the element in position 1, 7 and 3 in the list L must be returned. The function
must be implemented using the C++ list SLT API. Hint: The implementation for this function
will require some thought. Here are some hints for one approach to solve the problem. Use a for-
loop to walk through list P in a similar way as done in the printList() function. Consider creating
an index variable to track the item number in list L. Also, set the value of the iterator equal to a
variable in this loop. For example: int index = 0; // Track the position int position = (*itr) ; // Get
the item in P Create a second loop embedded within the first loop to walk through the elements
in list L. If the index equals position-1 then you know you have found the element. Thus, call the
push_back() function on the resultList to add the element. At the end of this loop increment the
index variable by 1. Note that your iterator variable for the second loop must be named
differently than the first loop. For example you can all it itr2. Output: The output from the
program once the function is implement will be:
/**
* List.cpp - This program implements and tests the getIntersection
* and getUnion functions.
*
* TODO: Include your name and course number here.
*/
#include
#include
#include
using namespace std;
template
void printList(list list1);
template
list getElements(list L, list P);
int main(int argc, char **argv)
{
// Declare list variables
list list1;
list list2;
// Add data to list 1
list1.push_back(\"the\");
list1.push_back(\"quick\");
list1.push_back(\"brown\");
list1.push_back(\"fox\");
list1.push_back(\"jumped\");
list1.push_back(\"over\");
list1.push_back(\"the\");
list1.push_back(\"lazy\");
list1.push_back(\"dog\");
// Add data to list 2
list2.push_back(4);
list2.push_back(3);
list2.push_back(9);
list2.push_back(6);
list2.push_back(7);
// Print out the lists
cout << \"List 1: \" << endl;
printList(list1);
cout << \"List 2: \" << endl;
printList(list2);
cout << endl;
cout << \"Results of getElements():\" << endl;
printList(getElements(list1, list2));
cout << \"\ ** Press any key to continue **\ \";
getchar();
return 0;
}
template
void printList(list list1)
{
cout << \" \";
// Use an iterator to walk the list. Print the value of
// for each node.
typename list::iterator itr;
for (itr = list1.begin(); itr != list1.end(); itr++)
{
// Get the contents of each node
Object value = (*itr);
// Print the value of the node
cout << \" \" << value;
}
cout << endl;
return;
}
template
list getElements(list L, list P)
{
//A result list to return to the caller
list resultList;
// TODO: Implement the details for the function.
return resultList;
}
Solution
/**
* List.cpp - Thi.
gnmenttakeAssignmentMaindoinvoker assignmentstakeAssignmernt Dr. L. .pdfarracollection
gnment/takeAssignmentMaindoinvoker assignmentstakeAssignmernt Dr. L. M. Paton is an
ophthalmologist As of December 31, Dr. Patton owned the following property that elated tos
prfessional practice, Pattion Eye Clinic Cash, 2,720 Professional Equipment, $62,400 Office
Equipment, $11,220 On the same date, he owed the following business creditors Munez Supply
Compay $5,320 Martin Equlpment Sales, $6,180 Compute the following amounts in the
accounting equation Assets Equity
Solution
Assets 76330 =2720+62400+11210 Liabilities 11500 =5320+6180 Owner\'s Equity 64830
=76330-11500.
Every cell in our bodies expresses the same genes. True or False.pdfarracollection
Every cell in our bodies expresses the same genes. True or False?
Solution
Answer : The given statement is FALSE. Although all the cells in our body contains same
amount of DNA/number of genes, different cells expresses different genes which gives their
identity. This phenamenan is called differential gene expression..
Describe the partition of Z resulting from the equivalence relati.pdfarracollection
Describe the partition of Z resulting from the equivalence relation = (mod 4).
Solution
a=b mod 4
implies and b give the same remainder modulo 4
There are only 4 least residues modulo 4: 0,1,2,3
So total 4 equivalence classes
The partitions are
[0]= Multiples of 4
[1]=INtegers of the form 4k+1
[2]=Integers of the form 4k+2
[3]=Integers of the form 4k+3.
describe what is meant by Rh factor when typing blood.Solution.pdfarracollection
describe what is meant by Rh factor when typing blood.
Solution
Ans). Rh derives from rhesus and the terms rhesus blood group system. Rh factor is an inherited
protein on the surface of red blood cells. It consists of many blood-group antigens, among which
the five antigens D, C, c, E, and e are the most important..
Describe the causes, symptoms, and treatment of conjunctivitisSo.pdfarracollection
Describe the causes, symptoms, and treatment of conjunctivitis
Solution
Conjuctivits is a condition that is associated with the redness and inflammation of the conjuctiva.
Conjuctiva is a thin transparent layer of tissue lining the inner surface of the eyelid covering the
white part of the eye. It is a common disease and is usually referred toas the \"pink eye\".
CAUSES OF CONJUCTIVITIS
Three types of conjuctivitis include:
Allergic Conjunctivitis
Infectious Conjuctivitis
Chemical Conjunctivitis
SYMPTOMS OF CONJUCTIVITIS
TREATMENT OF CONJUCTIVITIS
The appropriate treatment for conjunctivitis depends on its cause:.
Discuss the relationship between gap rule gene mutations, pair-rule .pdfarracollection
Discuss the relationship between gap rule gene mutations, pair-rule gene mutations, and segment
polarity gene mutations in Drosophila melanogaster.
Solution
Segmentation in Drosophila is controlled by gene expression cascade that occur in a sequential
order. The maternal effect genes form the anterior and posterior poles in the embryo. The spatial
pattern of segments is controlled by transcription regulation of gap genes. The gap genes express
the overlapping segments of anterior and posterior poles. The gap genes regulate next set of
genes called pair rule genes. These genes are expressed in 7 stripes corresponding to each
segment. Pair rule genes express the transcription factors regulating the segment polarity genes.
These genes are expressed as 14 segmentally repeated stripes. The segment polarity genes
express regulatory proteins and transcription factors that maintain interaction between cells and
finally, homeotic genes control the character of each segment.
The missing segments producing gaps are known by Krüppel mutants resulting in missing of T1-
A5 segments. Hunchback mutants are missing head segments and knirps mutants lack posterior
segments. Mutations in pair-rule genes- result in half the number of parasegments.The fushi-
tarazu mutants lack odd-numbered parasegments and even-skipped mutants lack even-numbered
parasegments. Mutations in segment polarity genes- result in duplication of the anterior or
posterior half within each segment. The gooseberry and engrailed mutants have the posterior part
of each segment replaced by the anterior part of the adjacent segment..
Create a directory your virtual machine. Within that directory creat.pdfarracollection
Create a directory your virtual machine. Within that directory create the html file index.html.
This should be an HTML5 formatted file, with the following elements and text defined
Links to an external JavaScript file q2.js in the same directory as index.html.
Contains a button with the text \"ClickMe\" (no quotes) that will invoke the callback function
\"go()\" when the button is clicked.
Contains a paragraph with id \"output\" (no quotes) which contains the text \"Change Me\". (no
quotes)
When the ClickMe button is pushed, the text in the HTML element with id \"output\" should be
updated as follows using JavaScript code in q2.js. (Note: the number given below should reset
when the page is reloaded and all effects below are cumulative.)
The first time the button is pushed, the colour of the text in output to be set to red.
The second time the button is pushed, the font of the text in output should be set to \"sans-serif\"
The third time the button is pressed, the text should be changed to five copies of whatever text is
currently found as the innerHTML of the output element. Do not add extra spaces or line breaks
to this value.
If the button is pushed four or more times, the text in output should be set to \"QUESTION
DONE\" (no quotes).
Solution
index.html
Title
Change MeClick Me
q2.js
var num_clicks = 0;
function clickme(){
num_clicks = num_clicks + 1;
if (num_clicks==1){
document.getElementById(\"output\").style.color=\"red\"; //change color to red on 1 click
}
else if (num_clicks==2){
document.getElementById(\"output\").style.fontFamily=\"sans-serif\"; //change font family
on 2 clicks
}
else if (num_clicks==3){
text = document.getElementById(\"output\").innerHTML;
document.getElementById(\"output\").innerHTML = text + text + text + text + text;
//change text on 3 clicks
}
else if (num_clicks>=4){
document.getElementById(\"output\").innerHTML = \"QUESTION DONE\"; //question
done text on 4 clicks
}
}.
Chordin, Tolloid and Sizzled all play important roles in BMP signal r.pdfarracollection
Chordin, Tolloid and Sizzled all play important roles in BMP signal regulation. Discuss Name
the three embryonic germ layers and briefly discuss how the BMP-Chordin axis determines the
fate of one of these germ layers
Solution
Ques-1: In Xenopus embryos, the cell differentiation of ectodermal and mesodermal layers are
mainly through the dorso- ventral axis and this differentiation is determined by the bone
morphogenetic proteins (BMPs) where cells are mainly exposed in the excellylar region.
Therefore, chordin activity (chondrin and Noggin are released by Spearmann organizer) has
mainly increased and tolloid family members can control these chondrin activity to promote
BMPs in generating organ systems such as blood or neural tubes. Sizzeled and chonrin activities
are mainly according to BMP gradient during gastrulation of embryonic development in xenopus
Answer: Ques-2:
Three embryonic layers: ectoderm, mesoderm and endoderm
The BMP-chondrin axis is going to determine the fate of formation of ectoderm or mesoderm
organ formation for example, inhibition of BMP is leading to formation of neural tube from
mesoderm instead of blood. Therefore, the factors such as Noggin, chondrin are going to be
regulated by these BMP factors during embryonic development.
Chills are used in casting where the part is likely to form a cavity.pdfarracollection
Chills are used in casting where the part is likely to form a cavity.They are used in thicker
regions to increase the solidification rate.
A. False
B. True
Solution
TRUE
To maximize the heat tranfer rate a metalic object is provided called CHILL. Chill is inserted
into the cavity created due to removal of pattern and inserted in moulding sand.
By changing the direction of the chill the direction of solidification also changes.
Chill is a metalic object which is conductive so heat transfer rate is high compare to moulding
sand..
A drug that disrupts tubulin polymerzation is applied to some cell.pdfarracollection
A drug that disrupts tubulin polymerzation is applied to some cells. What specific part of the cell
cycle will be disrupted?
A drug that disrupts tubulin polymerzation is applied to some cells. What specific part of the cell
cycle will be disrupted?
Solution
Microtubule assembly .... anaphase ... as chromosomes pass along microtubules towards poles of
new dividing cells ....and if micotubule disassembly occurs they cannot move also cargo cannot
move in the cells from one location to other location hence affecting the cells overall.
At the second metaphase of meiosis Chromosomes have single chromatid.pdfarracollection
At the second metaphase of meiosis Chromosomes have single chromatids and align in
homologous pairs. Chromosomes have single chromatids and do not align in homologous pairs.
Chromosomes have two chromatids and align in homologous pairs. Chromosomes have two
chromatids and do not align in homologous pairs. Chromosomes have two chromatids and are
separating to opposite poles of the cell. Incomplete dominance at a single locus always results
from the mutant protein having partial function results in a self-crossed population with identical
phenotypic and genotypic ratios cannot be distinguished from epistasis can generate a true
breeding intermediate phenotype gives the same genetic ratios as 2 unlinked genes each showing
complete dominance
Solution
1. The correct option is e. In the second metaphase of meiosis, the chromosomes have two
chromatids and are separating to opposite poles of the cell which is very similar to mitosis.
2. The correct option is d. This is because in incomplete dominance both the alleles are unable to
express themselves completely. Thus resulting in an F1 hybrid with an intermediate phenotype of
the two parental phenotype..
BEFO Ca.nin view shows longi tudimal vertical view or alde viu is a.pdfarracollection
BEFO Ca.nin view shows longi tudimal vertical view or \"alde viu is a relatively short vertical
view of the ground drawn aE EghEangles or perpendicular toaroute centeriine of 43. A 1ine that
identiries and separates adjoining tracts of privately ofr 44. The division ot a large parcel of
ground into smailer parcels for sale 45 Title to land may be transferred or conveyed from one
owner to another highway or sewe s publiely owned land in called a as separate building lots is
called a primarily by a legal document called a 46. Streets and roads are conveyed to the public
for right-ot way tor publie use by a developer or landowner by a recorded legal instrument
known as a 47. are neighboring property owners identitied in a metes and bounds boundary
description 48. Taking possession of someone else\'s property by open and continuous
encroachment for a statutory period of time is 49. The privilege or right, which the owner of one
parcel has to use the land of another for a certain defined purpose, is called an 50. The right of a
government to use private property for a specitic purpose for the pubiic benefit and welfare is
called 51. The owner of property adjacent to a body of water has certain privileges with respect
to the use of the water called_ 52. In many states a Surveyor\'s liability for damages due to
mistakes and inaccurate work is covered under the statute of limitations, more specifically under
the that liability begins from the time that the error vas discovered, not from when the work was
done. , which states 53. A 1inear measuring devise having a nominal length of 66\', and the
distances described in very old deeds which are referred to as perches or rods, and whose length
has a direct relationship to the acre.
Solution
41-Profile view
42-cross section view
43-Property line
44-Subdivision
45-Deed
46-Easement
47-Adjoiners
48-Adverse possession
49-Deed of dedication
50-Condemnation (Eminent domain)
51-Riparian right
52-Accidental errors
53-Scale.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Compare between the two light microscope SolutionFeature1. .pdf
1. Compare between the two light microscope:
Solution
Feature
1. Similar functional parts : source of light is same - visible light is used by focusing the light
either through lenses or prism on the specimen.
2. Dissimilar functional parts : Compound microscope- has multiple objective lenses with one
eyepiece;
Dissecting Microscope- has single objective lens with two eyepiece lenses
3. Purpose of use : Dissecting microscope: used to perform small dissections under the
microscope and to view live specimen , compound microscope- used to visualise things that are
too small to be seen via the naked eye.
7. Maximum magnification: Compound microscope- up to 1000x ; Dissecting microscope- up to
70x
4. Image dimension : -
5. Image orientation : -
6. Image development: no image development or orientation or dimensions- these are all
properties of electron microscopes
3. Purpose of use : Dissecting microscope: used to perform small dissections under the
microscope and to view live specimen , compound microscope- used to visualise things that are
too small to be seen via the naked eye.
7. Maximum magnification: Compound microscope- up to 1000x ; Dissecting microscope- up to
70x
4. Image dimension : -
